* [U-Boot] uBoot services
@ 2014-12-13 19:20 Gary Partis
2014-12-13 19:47 ` Jeroen Hofstee
0 siblings, 1 reply; 2+ messages in thread
From: Gary Partis @ 2014-12-13 19:20 UTC (permalink / raw)
To: u-boot
Hi all
I am using a Xilinx Zynq device (dual core ARM) which has uBoot in its internal boot flash.
I am sure I have read somewhere that uBoot has a number of services available to "bare metal" applications, such as malloc et Al. Is this so? If so, where may I find this documentation, as I have been unable to find it?
Thanks in advance ;-)
Cheers
Gary
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] uBoot services
2014-12-13 19:20 [U-Boot] uBoot services Gary Partis
@ 2014-12-13 19:47 ` Jeroen Hofstee
0 siblings, 0 replies; 2+ messages in thread
From: Jeroen Hofstee @ 2014-12-13 19:47 UTC (permalink / raw)
To: u-boot
Hello Gary,
On 13-12-14 20:20, Gary Partis wrote:
> Hi all
>
> I am using a Xilinx Zynq device (dual core ARM) which has uBoot in its internal boot flash.
>
> I am sure I have read somewhere that uBoot has a number of services available to "bare metal" applications, such as malloc et Al. Is this so? If so, where may I find this documentation, as I have been unable to find it?
>
>
There are two approaches actually, have a look at
u-boot/examples/
One of them is documented in doc/README.standalone.
Regards,
Jeroen
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-12-13 19:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-13 19:20 [U-Boot] uBoot services Gary Partis
2014-12-13 19:47 ` Jeroen Hofstee
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.