* [U-Boot] Booting imx6 board via USB-OTG and SPL
@ 2014-12-16 22:51 Nikolay Dimitrov
0 siblings, 0 replies; only message in thread
From: Nikolay Dimitrov @ 2014-12-16 22:51 UTC (permalink / raw)
To: u-boot
Hi guys,
When booting a fresh imx6 board via USB-OTG, the SPL is kinda useless
for bootstrapping my board when the SPI NOR is empty and u-boot.img
payload is not available.
I currently use a non-SPL U-Boot to prepare my boards after
manufacturing (write fuses & SPI NOR), but do you see a better way to
boot SPL+u-boot.img via OTG?
The reason I'm asking this is that I'm currently using a SPL-enabled
U-Boot as the production boot-loader, and having to support 2 versions
is non-optimal, so I'm looking for a better solution.
Thanks in advance. Regards,
Nikolay
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-12-16 22:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-16 22:51 [U-Boot] Booting imx6 board via USB-OTG and SPL Nikolay Dimitrov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.