All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ying.Liu@freescale.com (Liu Ying)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC v2 06/14] ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node
Date: Fri, 19 Dec 2014 10:25:05 +0800	[thread overview]
Message-ID: <54938C81.6070304@freescale.com> (raw)
In-Reply-To: <1418898812.4212.11.camel@pengutronix.de>

Hi Philipp,

On 12/18/2014 06:33 PM, Philipp Zabel wrote:
> Am Donnerstag, den 18.12.2014, 15:11 +0800 schrieb Liu Ying:
>> The MIPI DSI node contains some ports which represent possible DRM CRTCs
>> it can connect with.  Each port has a 'reg' property embedded.  This
>> property will be wrongly interpretted by the MIPI DSI bus driver, because
>> the driver will take each subnode which contains a 'reg' property as a
>> DSI peripheral device.  This patch moves the existing MIPI DSI ports into
>> a new 'ports' node so that the MIPI DSI bus driver may distinguish its
>> DSI peripheral device(s) from the existing ports.
>>
>> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

Thanks.  I'll add your ack for this one in the next version.

Regards,
Liu Ying

>
> regards
> Philipp
>

WARNING: multiple messages have this Message-ID (diff)
From: Liu Ying <Ying.Liu@freescale.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, linux@arm.linux.org.uk,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	kernel@pengutronix.de, mturquette@linaro.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH RFC v2 06/14] ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node
Date: Fri, 19 Dec 2014 10:25:05 +0800	[thread overview]
Message-ID: <54938C81.6070304@freescale.com> (raw)
In-Reply-To: <1418898812.4212.11.camel@pengutronix.de>

Hi Philipp,

On 12/18/2014 06:33 PM, Philipp Zabel wrote:
> Am Donnerstag, den 18.12.2014, 15:11 +0800 schrieb Liu Ying:
>> The MIPI DSI node contains some ports which represent possible DRM CRTCs
>> it can connect with.  Each port has a 'reg' property embedded.  This
>> property will be wrongly interpretted by the MIPI DSI bus driver, because
>> the driver will take each subnode which contains a 'reg' property as a
>> DSI peripheral device.  This patch moves the existing MIPI DSI ports into
>> a new 'ports' node so that the MIPI DSI bus driver may distinguish its
>> DSI peripheral device(s) from the existing ports.
>>
>> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

Thanks.  I'll add your ack for this one in the next version.

Regards,
Liu Ying

>
> regards
> Philipp
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Liu Ying <Ying.Liu@freescale.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: <dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <linux@arm.linux.org.uk>,
	<kernel@pengutronix.de>, <thierry.reding@gmail.com>,
	<shawn.guo@linaro.org>, <mturquette@linaro.org>,
	<airlied@linux.ie>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH RFC v2 06/14] ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node
Date: Fri, 19 Dec 2014 10:25:05 +0800	[thread overview]
Message-ID: <54938C81.6070304@freescale.com> (raw)
In-Reply-To: <1418898812.4212.11.camel@pengutronix.de>

Hi Philipp,

On 12/18/2014 06:33 PM, Philipp Zabel wrote:
> Am Donnerstag, den 18.12.2014, 15:11 +0800 schrieb Liu Ying:
>> The MIPI DSI node contains some ports which represent possible DRM CRTCs
>> it can connect with.  Each port has a 'reg' property embedded.  This
>> property will be wrongly interpretted by the MIPI DSI bus driver, because
>> the driver will take each subnode which contains a 'reg' property as a
>> DSI peripheral device.  This patch moves the existing MIPI DSI ports into
>> a new 'ports' node so that the MIPI DSI bus driver may distinguish its
>> DSI peripheral device(s) from the existing ports.
>>
>> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

Thanks.  I'll add your ack for this one in the next version.

Regards,
Liu Ying

>
> regards
> Philipp
>

  reply	other threads:[~2014-12-19  2:25 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-18  7:11 [PATCH RFC v2 00/14] Add support for i.MX MIPI DSI DRM driver Liu Ying
2014-12-18  7:11 ` Liu Ying
2014-12-18  7:11 ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 01/14] clk: divider: Correct parent clk round rate if no bestdiv is normally found Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 02/14] of: Add vendor prefix for Himax Technologies Inc Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 03/14] of: Add vendor prefix for Truly Semiconductors Limited Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 04/14] ARM: imx6q: Add GPR3 MIPI muxing control register field shift bits definition Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 05/14] ARM: imx6q: clk: Add the video_27m clock Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18 10:31   ` Philipp Zabel
2014-12-18 10:31     ` Philipp Zabel
2014-12-18 10:31     ` Philipp Zabel
2014-12-19  2:23     ` Liu Ying
2014-12-19  2:23       ` Liu Ying
2014-12-19  2:23       ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 06/14] ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18 10:33   ` Philipp Zabel
2014-12-18 10:33     ` Philipp Zabel
2014-12-18 10:33     ` Philipp Zabel
2014-12-19  2:25     ` Liu Ying [this message]
2014-12-19  2:25       ` Liu Ying
2014-12-19  2:25       ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 07/14] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 08/14] drm: imx: Add MIPI DSI host controller driver Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18 11:39   ` Philipp Zabel
2014-12-18 11:39     ` Philipp Zabel
2014-12-18 11:39     ` Philipp Zabel
2014-12-19  5:53     ` Liu Ying
2014-12-19  5:53       ` Liu Ying
2014-12-19  5:53       ` Liu Ying
2014-12-19 10:17       ` Philipp Zabel
2014-12-19 10:17         ` Philipp Zabel
2014-12-19 10:17         ` Philipp Zabel
2014-12-22  2:56         ` Liu Ying
2014-12-22  2:56           ` Liu Ying
2014-12-22  2:56           ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 09/14] drm: panel: Add support for Himax HX8369A MIPI DSI panel Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 10/14] ARM: dtsi: imx6qdl: Add support for MIPI DSI host controller Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 11/14] ARM: dts: imx6qdl-sabresd: Add support for TRULY TFT480800-16-E MIPI DSI panel Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 12/14] ARM: imx_v6_v7_defconfig: Cleanup for imx drm being moved out of staging Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 13/14] ARM: imx_v6_v7_defconfig: Add support for MIPI DSI host controller Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11 ` [PATCH RFC v2 14/14] ARM: imx_v6_v7_defconfig: Add support for Himax HX8369A panel Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-18  7:11   ` Liu Ying
2014-12-19  6:33 ` Re:[PATCH RFC v2 00/14] Add support for i.MX MIPI DSI DRM driver Andy Yan
2014-12-19  7:46   ` [PATCH " Liu Ying
2014-12-19  7:46     ` Liu Ying
2014-12-19  7:46     ` Liu Ying
2014-12-19  9:43     ` shrk andy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54938C81.6070304@freescale.com \
    --to=ying.liu@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.