* Regarding Mfg tool image in yocto SDK @ 2014-12-26 11:12 Subodh Sudhakar 2014-12-26 20:08 ` Sven Ebenfeld 0 siblings, 1 reply; 9+ messages in thread From: Subodh Sudhakar @ 2014-12-26 11:12 UTC (permalink / raw) To: meta-freescale [-- Attachment #1: Type: text/plain, Size: 422 bytes --] Hi all, I am working on a project which is based on imx6 sabresd board and my sdk is Yocto 1.6 daisy branch . And in my end product we have to keep eMMC as boot media , so i have to build images for Mfg tool in yocto SDK. so anyone guide me to create the Mfgtool images in yocto SDK so that i will flash that image in eMMC . *With Warm Regards,* Subodh *Cell : *+91 8467044971 | *Skype :* subodh.kant9 [-- Attachment #2: Type: text/html, Size: 662 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-26 11:12 Regarding Mfg tool image in yocto SDK Subodh Sudhakar @ 2014-12-26 20:08 ` Sven Ebenfeld 2014-12-26 20:20 ` Otavio Salvador 0 siblings, 1 reply; 9+ messages in thread From: Sven Ebenfeld @ 2014-12-26 20:08 UTC (permalink / raw) To: Subodh Sudhakar, meta-freescale Hi Subodh, Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: > Hi all, > I am working on a project which is based on imx6 sabresd board and my sdk > is Yocto 1.6 daisy branch . > And in my end product we have to keep eMMC as boot media , so i have to > build images for Mfg tool in yocto SDK. > so anyone guide me to create the Mfgtool images in yocto SDK so that i will > flash that image in eMMC . > In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using fsl-image-mfgtool-initramfs as target recipe. I'm using it for a custom i.MX6 Board with eMMC media. > > > *With Warm Regards,* > > Subodh > > *Cell : *+91 8467044971 | *Skype :* subodh.kant9 > > > Cheers, Sven ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-26 20:08 ` Sven Ebenfeld @ 2014-12-26 20:20 ` Otavio Salvador 2014-12-27 13:05 ` Subodh Sudhakar 0 siblings, 1 reply; 9+ messages in thread From: Otavio Salvador @ 2014-12-26 20:20 UTC (permalink / raw) To: Sven Ebenfeld; +Cc: meta-freescale@yoctoproject.org, Subodh Sudhakar On Fri, Dec 26, 2014 at 6:08 PM, Sven Ebenfeld <sven.ebenfeld@gmail.com> wrote: > Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: >> Hi all, >> I am working on a project which is based on imx6 sabresd board and my sdk >> is Yocto 1.6 daisy branch . >> And in my end product we have to keep eMMC as boot media , so i have to >> build images for Mfg tool in yocto SDK. >> so anyone guide me to create the Mfgtool images in yocto SDK so that i will >> flash that image in eMMC . >> > > In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using > fsl-image-mfgtool-initramfs as target recipe. I'm using it for a custom > i.MX6 Board with eMMC media. Daisy also has it. I have no problems using it for our customers. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-26 20:20 ` Otavio Salvador @ 2014-12-27 13:05 ` Subodh Sudhakar 2014-12-27 13:58 ` Subodh Sudhakar 0 siblings, 1 reply; 9+ messages in thread From: Subodh Sudhakar @ 2014-12-27 13:05 UTC (permalink / raw) To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1287 bytes --] Thank you all . Let me check it once and then i will revert back to you if i face any issue. *With Warm Regards,* Subodh VVDN Technologies Pvt Ltd *Cell : *+91 8467044971 | *Skype :* subodh.kant9 On Sat, Dec 27, 2014 at 1:50 AM, Otavio Salvador <otavio@ossystems.com.br> wrote: > On Fri, Dec 26, 2014 at 6:08 PM, Sven Ebenfeld <sven.ebenfeld@gmail.com> > wrote: > > Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: > >> Hi all, > >> I am working on a project which is based on imx6 sabresd board and my > sdk > >> is Yocto 1.6 daisy branch . > >> And in my end product we have to keep eMMC as boot media , so i have to > >> build images for Mfg tool in yocto SDK. > >> so anyone guide me to create the Mfgtool images in yocto SDK so that i > will > >> flash that image in eMMC . > >> > > > > In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using > > fsl-image-mfgtool-initramfs as target recipe. I'm using it for a custom > > i.MX6 Board with eMMC media. > > Daisy also has it. I have no problems using it for our customers. > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 > [-- Attachment #2: Type: text/html, Size: 2085 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-27 13:05 ` Subodh Sudhakar @ 2014-12-27 13:58 ` Subodh Sudhakar 2014-12-27 15:39 ` Sven Ebenfeld 0 siblings, 1 reply; 9+ messages in thread From: Subodh Sudhakar @ 2014-12-27 13:58 UTC (permalink / raw) To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/plain, Size: 1788 bytes --] Hi all, I did what you said using bitbake command. *subodh@subodh:~/velu_test/velu_wmsd/src/build$ fsl-image-mfgtool-intramfsfsl-image-mfgtool-intramfs: command not found* Please provide me quick help over it to proceed. *With Warm Regards,* Subodh VVDN Technologies Pvt Ltd *Cell : *+91 8467044971 | *Skype :* subodh.kant9 On Sat, Dec 27, 2014 at 6:35 PM, Subodh Sudhakar < subodh.sudhakar@vvdntech.com> wrote: > Thank you all . > Let me check it once and then i will revert back to you if i face any > issue. > > > > > *With Warm Regards,* > > Subodh > > VVDN Technologies Pvt Ltd > *Cell : *+91 8467044971 | *Skype :* subodh.kant9 > > On Sat, Dec 27, 2014 at 1:50 AM, Otavio Salvador <otavio@ossystems.com.br> > wrote: > >> On Fri, Dec 26, 2014 at 6:08 PM, Sven Ebenfeld <sven.ebenfeld@gmail.com> >> wrote: >> > Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: >> >> Hi all, >> >> I am working on a project which is based on imx6 sabresd board and my >> sdk >> >> is Yocto 1.6 daisy branch . >> >> And in my end product we have to keep eMMC as boot media , so i have to >> >> build images for Mfg tool in yocto SDK. >> >> so anyone guide me to create the Mfgtool images in yocto SDK so that i >> will >> >> flash that image in eMMC . >> >> >> > >> > In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using >> > fsl-image-mfgtool-initramfs as target recipe. I'm using it for a custom >> > i.MX6 Board with eMMC media. >> >> Daisy also has it. I have no problems using it for our customers. >> >> -- >> Otavio Salvador O.S. Systems >> http://www.ossystems.com.br http://code.ossystems.com.br >> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 >> > > [-- Attachment #2: Type: text/html, Size: 3027 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-27 13:58 ` Subodh Sudhakar @ 2014-12-27 15:39 ` Sven Ebenfeld 2014-12-29 3:35 ` Subodh Sudhakar 0 siblings, 1 reply; 9+ messages in thread From: Sven Ebenfeld @ 2014-12-27 15:39 UTC (permalink / raw) To: Subodh Sudhakar, Otavio Salvador; +Cc: meta-freescale@yoctoproject.org Am 27.12.2014 um 14:58 schrieb Subodh Sudhakar: > Hi all, > I did what you said using bitbake command. > > *subodh@subodh:~/velu_test/velu_wmsd/src/build$ > fsl-image-mfgtool-intramfsfsl-image-mfgtool-intramfs: command not found* You should run "bitbake fsl-image-mfgtool-intramfs" fsl-image-mfgtool-intramfs is a recipe for bitbake, not a shell command. > > Please provide me quick help over it to proceed. > > > > > *With Warm Regards,* > > Subodh > > VVDN Technologies Pvt Ltd > *Cell : *+91 8467044971 | *Skype :* subodh.kant9 > > On Sat, Dec 27, 2014 at 6:35 PM, Subodh Sudhakar < > subodh.sudhakar@vvdntech.com> wrote: > >> Thank you all . >> Let me check it once and then i will revert back to you if i face any >> issue. >> >> >> >> >> *With Warm Regards,* >> >> Subodh >> >> VVDN Technologies Pvt Ltd >> *Cell : *+91 8467044971 | *Skype :* subodh.kant9 >> >> On Sat, Dec 27, 2014 at 1:50 AM, Otavio Salvador <otavio@ossystems.com.br> >> wrote: >> >>> On Fri, Dec 26, 2014 at 6:08 PM, Sven Ebenfeld <sven.ebenfeld@gmail.com> >>> wrote: >>>> Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: >>>>> Hi all, >>>>> I am working on a project which is based on imx6 sabresd board and my >>> sdk >>>>> is Yocto 1.6 daisy branch . >>>>> And in my end product we have to keep eMMC as boot media , so i have to >>>>> build images for Mfg tool in yocto SDK. >>>>> so anyone guide me to create the Mfgtool images in yocto SDK so that i >>> will >>>>> flash that image in eMMC . >>>>> >>>> >>>> In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using >>>> fsl-image-mfgtool-initramfs as target recipe. I'm using it for a custom >>>> i.MX6 Board with eMMC media. >>> >>> Daisy also has it. I have no problems using it for our customers. >>> >>> -- >>> Otavio Salvador O.S. Systems >>> http://www.ossystems.com.br http://code.ossystems.com.br >>> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 >>> >> >> > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-27 15:39 ` Sven Ebenfeld @ 2014-12-29 3:35 ` Subodh Sudhakar 2014-12-29 4:09 ` Subodh Sudhakar 2014-12-30 12:37 ` Sven Ebenfeld 0 siblings, 2 replies; 9+ messages in thread From: Subodh Sudhakar @ 2014-12-29 3:35 UTC (permalink / raw) To: Sven Ebenfeld; +Cc: meta-freescale@yoctoproject.org, Otavio Salvador [-- Attachment #1: Type: text/plain, Size: 2501 bytes --] Hi Seven, can you give me help or any docs to build from recipe ? i am completel new to yocto. *With Warm Regards,* Subodh VVDN Technologies Pvt Ltd *Cell : *+91 8467044971 | *Skype :* subodh.kant9 On Sat, Dec 27, 2014 at 9:09 PM, Sven Ebenfeld <sven.ebenfeld@gmail.com> wrote: > > > Am 27.12.2014 um 14:58 schrieb Subodh Sudhakar: > > Hi all, > > I did what you said using bitbake command. > > > > *subodh@subodh:~/velu_test/velu_wmsd/src/build$ > > fsl-image-mfgtool-intramfsfsl-image-mfgtool-intramfs: command not found* > > You should run "bitbake fsl-image-mfgtool-intramfs" > > fsl-image-mfgtool-intramfs is a recipe for bitbake, not a shell command. > > > > Please provide me quick help over it to proceed. > > > > > > > > > > *With Warm Regards,* > > > > Subodh > > > > VVDN Technologies Pvt Ltd > > *Cell : *+91 8467044971 | *Skype :* subodh.kant9 > > > > On Sat, Dec 27, 2014 at 6:35 PM, Subodh Sudhakar < > > subodh.sudhakar@vvdntech.com> wrote: > > > >> Thank you all . > >> Let me check it once and then i will revert back to you if i face any > >> issue. > >> > >> > >> > >> > >> *With Warm Regards,* > >> > >> Subodh > >> > >> VVDN Technologies Pvt Ltd > >> *Cell : *+91 8467044971 | *Skype :* subodh.kant9 > >> > >> On Sat, Dec 27, 2014 at 1:50 AM, Otavio Salvador < > otavio@ossystems.com.br> > >> wrote: > >> > >>> On Fri, Dec 26, 2014 at 6:08 PM, Sven Ebenfeld < > sven.ebenfeld@gmail.com> > >>> wrote: > >>>> Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: > >>>>> Hi all, > >>>>> I am working on a project which is based on imx6 sabresd board and my > >>> sdk > >>>>> is Yocto 1.6 daisy branch . > >>>>> And in my end product we have to keep eMMC as boot media , so i have > to > >>>>> build images for Mfg tool in yocto SDK. > >>>>> so anyone guide me to create the Mfgtool images in yocto SDK so that > i > >>> will > >>>>> flash that image in eMMC . > >>>>> > >>>> > >>>> In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using > >>>> fsl-image-mfgtool-initramfs as target recipe. I'm using it for a > custom > >>>> i.MX6 Board with eMMC media. > >>> > >>> Daisy also has it. I have no problems using it for our customers. > >>> > >>> -- > >>> Otavio Salvador O.S. Systems > >>> http://www.ossystems.com.br http://code.ossystems.com.br > >>> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 > >>> > >> > >> > > > [-- Attachment #2: Type: text/html, Size: 3996 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-29 3:35 ` Subodh Sudhakar @ 2014-12-29 4:09 ` Subodh Sudhakar 2014-12-30 12:37 ` Sven Ebenfeld 1 sibling, 0 replies; 9+ messages in thread From: Subodh Sudhakar @ 2014-12-29 4:09 UTC (permalink / raw) To: Sven Ebenfeld; +Cc: meta-freescale@yoctoproject.org, Otavio Salvador [-- Attachment #1: Type: text/plain, Size: 2878 bytes --] *With Warm Regards,* Subodh VVDN Technologies Pvt Ltd *Cell : *+91 8467044971 | *Skype :* subodh.kant9 On Mon, Dec 29, 2014 at 9:05 AM, Subodh Sudhakar < subodh.sudhakar@vvdntech.com> wrote: > Hi Seven, > can you give me help or any docs to build from recipe ? i am completely > new to yocto. and our SDK is yocto 1.6 not yocto 1.7 and daisy branch. > > > > *With Warm Regards,* > > Subodh > > VVDN Technologies Pvt Ltd > *Cell : *+91 8467044971 | *Skype :* subodh.kant9 > > On Sat, Dec 27, 2014 at 9:09 PM, Sven Ebenfeld <sven.ebenfeld@gmail.com> > wrote: > >> >> >> Am 27.12.2014 um 14:58 schrieb Subodh Sudhakar: >> > Hi all, >> > I did what you said using bitbake command. >> > >> > *subodh@subodh:~/velu_test/velu_wmsd/src/build$ >> > fsl-image-mfgtool-intramfsfsl-image-mfgtool-intramfs: command not found* >> >> You should run "bitbake fsl-image-mfgtool-intramfs" >> >> fsl-image-mfgtool-intramfs is a recipe for bitbake, not a shell command. >> > >> > Please provide me quick help over it to proceed. >> > >> > >> > >> > >> > *With Warm Regards,* >> > >> > Subodh >> > >> > VVDN Technologies Pvt Ltd >> > *Cell : *+91 8467044971 | *Skype :* subodh.kant9 >> > >> > On Sat, Dec 27, 2014 at 6:35 PM, Subodh Sudhakar < >> > subodh.sudhakar@vvdntech.com> wrote: >> > >> >> Thank you all . >> >> Let me check it once and then i will revert back to you if i face any >> >> issue. >> >> >> >> >> >> >> >> >> >> *With Warm Regards,* >> >> >> >> Subodh >> >> >> >> VVDN Technologies Pvt Ltd >> >> *Cell : *+91 8467044971 | *Skype :* subodh.kant9 >> >> >> >> On Sat, Dec 27, 2014 at 1:50 AM, Otavio Salvador < >> otavio@ossystems.com.br> >> >> wrote: >> >> >> >>> On Fri, Dec 26, 2014 at 6:08 PM, Sven Ebenfeld < >> sven.ebenfeld@gmail.com> >> >>> wrote: >> >>>> Am 26.12.2014 um 12:12 schrieb Subodh Sudhakar: >> >>>>> Hi all, >> >>>>> I am working on a project which is based on imx6 sabresd board and >> my >> >>> sdk >> >>>>> is Yocto 1.6 daisy branch . >> >>>>> And in my end product we have to keep eMMC as boot media , so i >> have to >> >>>>> build images for Mfg tool in yocto SDK. >> >>>>> so anyone guide me to create the Mfgtool images in yocto SDK so >> that i >> >>> will >> >>>>> flash that image in eMMC . >> >>>>> >> >>>> >> >>>> In Yocto 1.7 Dizzy Branch there is support for mfgtool-images using >> >>>> fsl-image-mfgtool-initramfs as target recipe. I'm using it for a >> custom >> >>>> i.MX6 Board with eMMC media. >> >>> >> >>> Daisy also has it. I have no problems using it for our customers. >> >>> >> >>> -- >> >>> Otavio Salvador O.S. Systems >> >>> http://www.ossystems.com.br http://code.ossystems.com.br >> >>> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 >> >>> >> >> >> >> >> > >> > > [-- Attachment #2: Type: text/html, Size: 4691 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Regarding Mfg tool image in yocto SDK 2014-12-29 3:35 ` Subodh Sudhakar 2014-12-29 4:09 ` Subodh Sudhakar @ 2014-12-30 12:37 ` Sven Ebenfeld 1 sibling, 0 replies; 9+ messages in thread From: Sven Ebenfeld @ 2014-12-30 12:37 UTC (permalink / raw) To: Subodh Sudhakar; +Cc: meta-freescale@yoctoproject.org, Otavio Salvador Hi Subodh, Am 29.12.2014 um 04:35 schrieb Subodh Sudhakar: > Hi Seven, > can you give me help or any docs to build from recipe ? i am completel new > to yocto. You should have a look at these two manuals: http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html http://www.openembedded.org/wiki/Getting_started I found Angstrom to be a good starting point as well as it includes quite some layers and different BSPs. https://github.com/Angstrom-distribution/meta-angstrom/blob/master/README Best Regards, Sven ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-12-30 12:37 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-12-26 11:12 Regarding Mfg tool image in yocto SDK Subodh Sudhakar 2014-12-26 20:08 ` Sven Ebenfeld 2014-12-26 20:20 ` Otavio Salvador 2014-12-27 13:05 ` Subodh Sudhakar 2014-12-27 13:58 ` Subodh Sudhakar 2014-12-27 15:39 ` Sven Ebenfeld 2014-12-29 3:35 ` Subodh Sudhakar 2014-12-29 4:09 ` Subodh Sudhakar 2014-12-30 12:37 ` Sven Ebenfeld
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.