* [PATCH 1/2 v7] ALSA: usb-audio: Add mixer control for Digidesign Mbox 1 clock source
2014-11-11 14:09 [PATCH 0/2 v7] Digidesign Mbox 1 enhancements Damien Zammit
@ 2014-11-11 14:09 ` Damien Zammit
2014-11-11 14:09 ` [PATCH 2/2 v7] ALSA: usb-audio: Add duplex mode for Digidesign Mbox 1 and enable mixer Damien Zammit
2014-11-11 16:16 ` [PATCH 0/2 v7] Digidesign Mbox 1 enhancements Takashi Iwai
2 siblings, 0 replies; 6+ messages in thread
From: Damien Zammit @ 2014-11-11 14:09 UTC (permalink / raw)
To: alsa-devel; +Cc: tiwai, Damien Zammit, clemens
This patch provides the infrastructure for the Digidesign Mbox 1
to have a mixer control for selecting the clock source.
Valid options are Internal and S/PDIF external sync.
A non-documented command is sent to the device to enable this feature
found by reverse engineering and bus snooping.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
---
sound/usb/mixer_maps.c | 9 ++++
sound/usb/mixer_quirks.c | 129 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 138 insertions(+)
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index d1d72ff..1994d41 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -179,6 +179,11 @@ static struct usbmix_name_map audigy2nx_map[] = {
{ 0 } /* terminator */
};
+static struct usbmix_name_map mbox1_map[] = {
+ { 1, "Clock" },
+ { 0 } /* terminator */
+};
+
static struct usbmix_selector_map c400_selectors[] = {
{
.id = 0x80,
@@ -416,6 +421,10 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
.map = aureon_51_2_map,
},
{
+ .id = USB_ID(0x0dba, 0x1000),
+ .map = mbox1_map,
+ },
+ {
.id = USB_ID(0x13e5, 0x0001),
.map = scratch_live_map,
.ignore_ctl_error = 1,
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 3980bf5..4520316 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -565,6 +565,131 @@ static int snd_xonar_u1_controls_create(struct usb_mixer_interface *mixer)
return 0;
}
+/* Digidesign Mbox 1 clock source switch (internal/spdif) */
+
+static int snd_mbox1_switch_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.enumerated.item[0] = kctl->private_value;
+ return 0;
+}
+
+static int snd_mbox1_switch_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_usb_audio *chip;
+ struct usb_mixer_interface *mixer;
+ int err;
+ bool cur_val, new_val;
+ unsigned char buff[3];
+
+ cur_val = kctl->private_value;
+ new_val = ucontrol->value.enumerated.item[0];
+
+ mixer = snd_kcontrol_chip(kctl);
+ if (snd_BUG_ON(!mixer))
+ return -EINVAL;
+
+ chip = mixer->chip;
+ if (snd_BUG_ON(!chip))
+ return -EINVAL;
+
+ if (cur_val == new_val)
+ return 0;
+
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown) {
+ err = -ENODEV;
+ goto err;
+ }
+
+ /* Prepare for magic command to toggle clock source */
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_rcvctrlpipe(chip->dev, 0), 0x81,
+ USB_DIR_IN |
+ USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE, 0x00, 0x500, buff, 1);
+ if (err < 0)
+ goto err;
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_rcvctrlpipe(chip->dev, 0), 0x81,
+ USB_DIR_IN |
+ USB_TYPE_CLASS |
+ USB_RECIP_ENDPOINT, 0x100, 0x81, buff, 3);
+ if (err < 0)
+ goto err;
+
+ /* 2 possibilities: Internal -> send sample rate
+ * S/PDIF sync -> send zeroes
+ * NB: Sample rate locked to 48kHz on purpose to
+ * prevent user from resetting the sample rate
+ * while S/PDIF sync is enabled and confusing
+ * this configuration.
+ */
+ if (new_val == 0) {
+ buff[0] = 0x80;
+ buff[1] = 0xbb;
+ buff[2] = 0x00;
+ } else {
+ buff[0] = buff[1] = buff[2] = 0x00;
+ }
+
+ /* Send the magic command to toggle the clock source */
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_sndctrlpipe(chip->dev, 0), 0x1,
+ USB_TYPE_CLASS |
+ USB_RECIP_ENDPOINT, 0x100, 0x81, buff, 3);
+ if (err < 0)
+ goto err;
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_rcvctrlpipe(chip->dev, 0), 0x81,
+ USB_DIR_IN |
+ USB_TYPE_CLASS |
+ USB_RECIP_ENDPOINT, 0x100, 0x81, buff, 3);
+ if (err < 0)
+ goto err;
+ err = snd_usb_ctl_msg(chip->dev,
+ usb_rcvctrlpipe(chip->dev, 0), 0x81,
+ USB_DIR_IN |
+ USB_TYPE_CLASS |
+ USB_RECIP_ENDPOINT, 0x100, 0x2, buff, 3);
+ if (err < 0)
+ goto err;
+ kctl->private_value = new_val;
+
+err:
+ up_read(&chip->shutdown_rwsem);
+ return err < 0 ? err : 1;
+}
+
+static int snd_mbox1_switch_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *const texts[2] = {
+ "Internal",
+ "S/PDIF"
+ };
+
+ return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts);
+}
+
+static struct snd_kcontrol_new snd_mbox1_switch = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Clock Source",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = snd_mbox1_switch_info,
+ .get = snd_mbox1_switch_get,
+ .put = snd_mbox1_switch_put,
+ .private_value = 0
+};
+
+static int snd_mbox1_create_sync_switch(struct usb_mixer_interface *mixer)
+{
+ return snd_ctl_add(mixer->chip->card,
+ snd_ctl_new1(&snd_mbox1_switch, mixer));
+}
+
/* Native Instruments device quirks */
#define _MAKE_NI_CONTROL(bRequest,wIndex) ((bRequest) << 16 | (wIndex))
@@ -1632,6 +1757,10 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
err = snd_microii_controls_create(mixer);
break;
+ case USB_ID(0x0dba, 0x1000): /* Digidesign Mbox 1 */
+ err = snd_mbox1_create_sync_switch(mixer);
+ break;
+
case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */
err = snd_nativeinstruments_create_mixer(mixer,
snd_nativeinstruments_ta6_mixers,
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/2 v7] ALSA: usb-audio: Add duplex mode for Digidesign Mbox 1 and enable mixer
2014-11-11 14:09 [PATCH 0/2 v7] Digidesign Mbox 1 enhancements Damien Zammit
2014-11-11 14:09 ` [PATCH 1/2 v7] ALSA: usb-audio: Add mixer control for Digidesign Mbox 1 clock source Damien Zammit
@ 2014-11-11 14:09 ` Damien Zammit
2014-11-11 16:16 ` [PATCH 0/2 v7] Digidesign Mbox 1 enhancements Takashi Iwai
2 siblings, 0 replies; 6+ messages in thread
From: Damien Zammit @ 2014-11-11 14:09 UTC (permalink / raw)
To: alsa-devel; +Cc: tiwai, Damien Zammit, clemens
This patch provides duplex support for the Digidesign Mbox 1 sound
card and has been a work in progress for about a year.
Users have confirmed on my website that previous versions of this patch
have worked on the hardware and I have been testing extensively.
It also enables the mixer control for providing clock source
selector based on the previous patch.
The sample rate has been hardcoded to 48kHz because it works better with
the S/PDIF sync mode when the sample rate is locked. This is the
highest rate that the device supports and no loss of functionality
is observed by restricting the sample rate apart from the inability to selec
a lower rate.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
---
sound/usb/quirks-table.h | 41 ++++++++++++++++++++++++++++++++---------
1 file changed, 32 insertions(+), 9 deletions(-)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index c657752..13f44fd 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2944,7 +2944,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.data = (const struct snd_usb_audio_quirk[]){
{
.ifnum = 0,
- .type = QUIRK_IGNORE_INTERFACE,
+ .type = QUIRK_AUDIO_STANDARD_MIXER,
},
{
.ifnum = 1,
@@ -2955,16 +2955,40 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.iface = 1,
.altsetting = 1,
.altset_idx = 1,
- .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .attributes = 0x4,
.endpoint = 0x02,
- .ep_attr = 0x01,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000,
- .rate_min = 44100,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_SYNC,
+ .maxpacksize = 0x130,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
.rate_max = 48000,
- .nr_rates = 2,
+ .nr_rates = 1,
.rate_table = (unsigned int[]) {
- 44100, 48000
+ 48000
+ }
+ }
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3BE,
+ .channels = 2,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = 0x4,
+ .endpoint = 0x81,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC,
+ .maxpacksize = 0x130,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) {
+ 48000
}
}
},
@@ -2972,7 +2996,6 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.ifnum = -1
}
}
-
}
},
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread