All of lore.kernel.org
 help / color / mirror / Atom feed
* videobuf2_core oops, recent media_build
@ 2014-12-27  9:35 Jurgen Kramer
  2014-12-29 14:38 ` videobuf2_core oops, recent media_build. dvbsky t980c's Jurgen Kramer
  2015-01-12 15:21 ` videobuf2_core oops, recent media_build Hans Verkuil
  0 siblings, 2 replies; 9+ messages in thread
From: Jurgen Kramer @ 2014-12-27  9:35 UTC (permalink / raw)
  To: linux-media

I am seeing kernel oopses using recent media_builds on kernel 3.17:

[  506.969697] BUG: unable to handle kernel NULL pointer dereference at
0000000000000058
[  506.969720] IP: [<ffffffffa03a233a>] vb2_thread+0x17a/0x480
[videobuf2_core]
[  506.969739] PGD 0 
[  506.969746] Oops: 0002 [#1] SMP 
[  506.969754] Modules linked in: nf_conntrack_netbios_ns
nf_conntrack_broadcast cfg80211 rfkill ip6t_rpfilter ip6t_REJECT
xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter
ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_raw ip6table_filter
ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw sp2(OE)
si2157(OE) si2168(OE) i2c_mux nouveau cx25840(OE) cx23885(OE)
altera_ci(OE) tda18271(OE) altera_stapl(OE) videobuf2_dvb(OE)
videobuf2_core(OE) videobuf2_dma_sg(OE) videobuf2_memops(OE) snd_seq
snd_seq_device snd_pcm snd_timer snd video i2c_algo_bit ttm
drm_kms_helper soundcore iTCO_wdt ppdev gpio_ich iTCO_vendor_support
tveeprom(OE) cx2341x(OE)
[  506.969871]  coretemp dvb_core(OE) v4l2_common(OE) videodev(OE)
media(OE) kvm crc32c_intel raid456 async_raid6_recov async_memcpy
async_pq async_xor drm xor async_tx raid6_pq microcode serio_raw shpchp
i7core_edac edac_core i2c_i801 lpc_ich mfd_core parport_pc parport
ite_cir(OE) rc_core(OE) tpm_infineon tpm_tis tpm acpi_cpufreq nfsd
auth_rpcgss nfs_acl lockd sunrpc mxm_wmi asix usbnet r8169 mii wmi
[  506.969970] CPU: 0 PID: 3160 Comm: vb2-cx23885[0] Tainted: G
OE  3.17.4-200.fc20.x86_64 #1
[  506.969982] Hardware name: To Be Filled By O.E.M. To Be Filled By
O.E.M./P55 Extreme, BIOS P2.70 08/20/2010
[  506.969993] task: ffff8800bc18e220 ti: ffff88020d36c000 task.ti:
ffff88020d36c000
[  506.970002] RIP: 0010:[<ffffffffa03a233a>]  [<ffffffffa03a233a>]
vb2_thread+0x17a/0x480 [videobuf2_core]
[  506.970021] RSP: 0018:ffff88020d36fe68  EFLAGS: 00010246
[  506.970663] RAX: 0000000000000000 RBX: 0000000000000000 RCX:
000000000000000b
[  506.971305] RDX: 0000000000000058 RSI: ffff8800bc18e220 RDI:
0000000000000058
[  506.971952] RBP: ffff88020d36fec0 R08: ffff88020d36c000 R09:
000000000000158f
[  506.972611] R10: 00000000000030de R11: 0000000000000010 R12:
0000000000000058
[  506.973275] R13: ffff8800b81814a0 R14: 0000000000000000 R15:
ffff880225c61028
[  506.973947] FS:  0000000000000000(0000) GS:ffff880233c00000(0000)
knlGS:0000000000000000
[  506.974634] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  506.975321] CR2: 0000000000000058 CR3: 0000000001c14000 CR4:
00000000000007f0
[  506.976021] Stack:
[  506.976723]  ffff8800bc18e220 0000000000000070 00ffffff81c1b460
0000000000000000
[  506.977442]  ffff880200000000 ffff880225c61028 ffff88020d1d8480
ffff880225c61028
[  506.978165]  ffffffffa03a21c0 0000000000000000 0000000000000000
ffff88020d36ff48
[  506.979055] Call Trace:
[  506.979795]  [<ffffffffa03a21c0>] ? vb2_internal_qbuf+0x210/0x210
[videobuf2_core]
[  506.980545]  [<ffffffff810b0498>] kthread+0xd8/0xf0
[  506.981293]  [<ffffffff810b03c0>] ? kthread_create_on_node
+0x190/0x190
[  506.982045]  [<ffffffff8172e33c>] ret_from_fork+0x7c/0xb0
[  506.982806]  [<ffffffff810b03c0>] ? kthread_create_on_node
+0x190/0x190
[  506.983568] Code: 89 e7 ba 58 00 00 00 0f 85 94 01 00 00 40 f6 c7 02
0f 85 72 01 00 00 40 f6 c7 04 0f 85 50 01 00 00 89 d1 31 c0 c1 e9 03 f6
c2 04 <f3> 48 ab 74 0a c7 07 00 00 00 00 48 83 c7 04 f6 c2 02 74 0a 31 
[  506.984464] RIP  [<ffffffffa03a233a>] vb2_thread+0x17a/0x480
[videobuf2_core]
[  506.985306]  RSP <ffff88020d36fe68>
[  506.986147] CR2: 0000000000000058
[  506.990986] ---[ end trace 1973fbcab83c3353 ]---

First I thought is was related to CAM initialization but after removing
the CAMS and doing a fresh cold start I am still seeing the oopses.
After the oops everything is still functioning. I am using 3x DVBSKY
T980C. How can I debug this further?

Thanks,
Jurgen



^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2015-01-12 16:49 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-27  9:35 videobuf2_core oops, recent media_build Jurgen Kramer
2014-12-29 14:38 ` videobuf2_core oops, recent media_build. dvbsky t980c's Jurgen Kramer
     [not found]   ` <CAA9z4Lbk0h=manuppLW+s58e4C2g1=jM8D6MYDKG+8XWBse1cw@mail.gmail.com>
2014-12-29 14:47     ` Chris Lee
2014-12-29 19:11       ` nick
2014-12-29 19:47         ` Chris Lee
2014-12-29 19:50           ` nick
2015-01-12 15:29   ` Hans Verkuil
2015-01-12 16:42     ` Jurgen Kramer
2015-01-12 15:21 ` videobuf2_core oops, recent media_build Hans Verkuil

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.