Re: [PATCH] ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc

[Suman Anna <s-anna@ti.com>]

Hi Paul,

On 01/06/2015 11:14 AM, Suman Anna wrote:
> Hi Paul,
> 
> On 01/06/2015 02:14 AM, Lokesh Vutla wrote:
>> Hi Paul,
>> On Tuesday 06 January 2015 07:34 AM, Paul Walmsley wrote:
>>>
>>> Roger, Lokesh, could you try this one instead?
>> Yep, the below patch works on AM437x.
>> Boot logs here: http://paste.ubuntu.com/9680938/
>>
>> Thanks and regards,
>> Lokesh
>>>
>>> It passes all the basic tests here except it does not boot on the 4460 
>>> VAR-SOM-OM - unclear why at this point - but it would be good to see if it 
>>> works on your AM4372 boards, since I don't have that one.

Looking at your rc3 log @
http://www.pwsan.com/omap/testlogs/test_v3.19-rc3/20150105224749/boot/4460varsomom/,
I do see a missing reg entry for mailbox, and that's the reason for your
hang because of the missing bail out in your new patch.

[    0.261932] ------------[ cut here ]------------
[    0.261962] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2458 _init+0x3a0/0x3f0()
[    0.261962] omap_hwmod: mailbox: doesn't have mpu register target base
...
...
[    0.262329] ---[ end trace a1be72591db4662e ]---

Now that said, this is weird, since the reg property for mailbox is
defined in the base omap4.dtsi and should be inherited by the 4460
VAR-SOM-OM, unless you are booting with an old dtb.

regards
Suman

>>>
>>> Test logs are here:
>>>
>>> http://www.pwsan.com/omap/testlogs/hwmod_skip_only_remap_v3.19-rc/20150105171744/
>>>
>>>
>>> - Paul
>>>
>>>
>>> From 4f2e13bd2181e0ebede3aabc484aa2339830748a Mon Sep 17 00:00:00 2001
>>> From: Paul Walmsley <paul@pwsan.com>
>>> Date: Mon, 5 Jan 2015 15:49:57 -0700
>>> Subject: [PATCH] Only skip ioremap() if IP block does not have OCP header
>>>  registers. Experimental.
>>>
>>> ---
>>>  arch/arm/mach-omap2/omap_hwmod.c | 33 +++++++++++++++++++++------------
>>>  1 file changed, 21 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
>>> index cbb908dc5cf0..03df8833d399 100644
>>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>>> @@ -1938,6 +1938,8 @@ static int _reset(struct omap_hwmod *oh)
>>>  	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
>>>  
>>>  	if (oh->class->reset) {
>>> +		WARN(!oh->_mpu_rt_va, "Attempt to call custom reset with no MPU register target ioremapped: %s",
>>> +		     oh->name);
>>>  		r = oh->class->reset(oh);
>>>  	} else {
>>>  		if (oh->rst_lines_cnt > 0) {
>>> @@ -2358,15 +2360,19 @@ static int of_dev_hwmod_lookup(struct device_node *np,
>>>  }
>>>  
>>>  /**
>>> - * _init_mpu_rt_base - populate the virtual address for a hwmod
>>> + * _init_mpu_rt_base - populate the MPU port and virtual address
>>>   * @oh: struct omap_hwmod * to locate the virtual address
>>>   * @data: (unused, caller should pass NULL)
>>>   * @index: index of the reg entry iospace in device tree
>>>   * @np: struct device_node * of the IP block's device node in the DT data
>>>   *
>>> - * Cache the virtual address used by the MPU to access this IP block's
>>> - * registers.  This address is needed early so the OCP registers that
>>> - * are part of the device's address space can be ioremapped properly.
>>> + * Cache the interconnect target port and the virtual address used by
>>> + * the MPU to access this IP block's registers.  The address is needed
>>> + * early so the OCP registers that are part of the device's address
>>> + * space can be ioremapped properly.  The presence or absence of the
>>> + * interconnect target port also indicates whether the hwmod code
>>> + * should wait for the IP block to indicate readiness after it is
>>> + * enabled.
>>>   *
>>>   * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
>>>   * -ENXIO on absent or invalid register target address space.
>>> @@ -2385,6 +2391,13 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
>>>  	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
>>>  		return -ENXIO;
>>>  
>>> +	/*
>>> +	 * If there's no need for the hwmod code to read or write to
>>> +	 * the IP block registers, bail out early before the ioremap()
>>> +	 */
>>> +	if (!oh->class->sysc)
>>> +		return 0;
>>> +
>>>  	mem = _find_mpu_rt_addr_space(oh);
>>>  	if (!mem) {
>>>  		pr_debug("omap_hwmod: %s: no MPU register target found\n",
>>> @@ -2451,14 +2464,10 @@ static int __init _init(struct omap_hwmod *oh, void *data)
>>>  				oh->name, np->name);
>>>  	}
>>>  
>>> -	if (oh->class->sysc) {
>>> -		r = _init_mpu_rt_base(oh, NULL, index, np);
>>> -		if (r < 0) {
>>> -			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
>>> -			     oh->name);
>>> -			return 0;
>>> -		}
>>> -	}
>>> +	r = _init_mpu_rt_base(oh, NULL, index, np);
>>> +	if (r < 0)
>>> +		pr_debug("omap_hwmod: %s: doesn't have mpu register target base\n",
>>> +			 oh->name);
> 
> You have removed the return from the above block on failure. If any DT
> entry doesn't have the reg property, this will hang the kernel boot.
> Just remove the "reg" entry from any of the existing DT, and you will
> run into the issue, this is what 6423d6df1440 ("ARM: OMAP2+: hwmod:
> check for module address space during init") fixed. Also, are you sure
> you want to turn the WARN into a pr_debug, it won't even show during the
> kernel boot log if the reg base is missing.
> 
> regards
> Suman
> 
>>>  
>>>  	r = _init_clocks(oh, NULL);
>>>  	if (r < 0) {
>>>
>>
>