Re: Audio glitch with SGTL5000

[Gary Thomas <gary@mlbassoc.com>]

On 2015-01-22 13:28, Nikolay Dimitrov wrote:
> Hi Gary,
>
> On 01/22/2015 10:16 PM, Gary Thomas wrote:
>> On 2015-01-22 12:49, Fabio Estevam wrote:
>>> On Thu, Jan 22, 2015 at 5:46 PM, Gary Thomas <gary@mlbassoc.com> wrote:
>>>
>>>> Nevermind - I rebuilt my image today and the sound is back.
>>>>
>>>> That said, it brings up an interesting issue.  I'm running the
>>>> same kernel on two i.MX6 boards - the SabreLite and one of my
>>>> company's internal design which is _almost_ identical.  The SGTL5000
>>>> setup is identical.  My SabreLite does not have a pop, but my other
>>>> board does.  I wonder what could be the difference?  They do have
>>>> slightly different i.MX6 silicon (not sure about the SGTL5000).
>>>> SabreLite = i.MX6Q rev 1.0,  My board = i.MX6Q rev 1.2
>>>
>>> Do you get the pop on your board if you use the workaround patch that
>>> Nikolay is using?
>>>
>>
>> I haven't seen it - was it sent to this list?
>
> Yep, check my message sent on 21.Jan, 02:34AM to this same thread.
>
> Regards,
> Nikolay


Sorry, it won't apply (malformed).  Could you send it as an attachment?
To me privately if you wish.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------