[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Chunyan Zhang]

This patch-set split the last version, and addressed the review comments from
last version on serial driver code.

Changes from v7:
* Addressed review comments from Peter:
	- Initialized the stack local with zero in sprd_set_termios()
	- Used dev_get_drvdata() to get sprd_uart_port

Changes from v6:
	- Setted SPRD_TIMEOUT with 256 rather than 2048
	- Used u32 instead of uint32_t
	- Removed inline of handle_lsr_errors which is a single call site function
	- Removed unused parameter of sprd_tx & sprd_rx
	- Used spin_lock_irqsave in sprd_startup() instead of spin_lock
	- Added a check for port->sysrq in sprd_console_write()
	- Used a global counter as a condition of calling uart_{un}register_driver
	- Added pdev->id assignment in probe()
	- Setted port->flags with UPF_BOOT_AUTOCONF instead of ASYNC_BOOT_AUTOCONF

Changes from v5:
	- Used Spreadtrum instead of SPRD in menus
	- Changed TTY name to 'ttyS'
	- Moved uart_register_driver() to probe()
	- Added spinlock as needed
	- Removed register states saving and restoring in suspend() and resume()

Chunyan Zhang (2):
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  tty/serial: Add Spreadtrum sc9836-uart driver support

 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/tty/serial/Kconfig                         |   18 +
 drivers/tty/serial/Makefile                        |    1 +
 drivers/tty/serial/sprd_serial.c                   |  797 ++++++++++++++++++++
 include/uapi/linux/serial_core.h                   |    3 +
 7 files changed, 838 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt
 create mode 100644 drivers/tty/serial/sprd_serial.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Chunyan Zhang]

This patch-set split the last version, and addressed the review comments from
last version on serial driver code.

Changes from v7:
* Addressed review comments from Peter:
	- Initialized the stack local with zero in sprd_set_termios()
	- Used dev_get_drvdata() to get sprd_uart_port

Changes from v6:
	- Setted SPRD_TIMEOUT with 256 rather than 2048
	- Used u32 instead of uint32_t
	- Removed inline of handle_lsr_errors which is a single call site function
	- Removed unused parameter of sprd_tx & sprd_rx
	- Used spin_lock_irqsave in sprd_startup() instead of spin_lock
	- Added a check for port->sysrq in sprd_console_write()
	- Used a global counter as a condition of calling uart_{un}register_driver
	- Added pdev->id assignment in probe()
	- Setted port->flags with UPF_BOOT_AUTOCONF instead of ASYNC_BOOT_AUTOCONF

Changes from v5:
	- Used Spreadtrum instead of SPRD in menus
	- Changed TTY name to 'ttyS'
	- Moved uart_register_driver() to probe()
	- Added spinlock as needed
	- Removed register states saving and restoring in suspend() and resume()

Chunyan Zhang (2):
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  tty/serial: Add Spreadtrum sc9836-uart driver support

 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/tty/serial/Kconfig                         |   18 +
 drivers/tty/serial/Makefile                        |    1 +
 drivers/tty/serial/sprd_serial.c                   |  797 ++++++++++++++++++++
 include/uapi/linux/serial_core.h                   |    3 +
 7 files changed, 838 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt
 create mode 100644 drivers/tty/serial/sprd_serial.c

-- 
1.7.9.5

[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Chunyan Zhang]

This patch-set split the last version, and addressed the review comments from
last version on serial driver code.

Changes from v7:
* Addressed review comments from Peter:
	- Initialized the stack local with zero in sprd_set_termios()
	- Used dev_get_drvdata() to get sprd_uart_port

Changes from v6:
	- Setted SPRD_TIMEOUT with 256 rather than 2048
	- Used u32 instead of uint32_t
	- Removed inline of handle_lsr_errors which is a single call site function
	- Removed unused parameter of sprd_tx & sprd_rx
	- Used spin_lock_irqsave in sprd_startup() instead of spin_lock
	- Added a check for port->sysrq in sprd_console_write()
	- Used a global counter as a condition of calling uart_{un}register_driver
	- Added pdev->id assignment in probe()
	- Setted port->flags with UPF_BOOT_AUTOCONF instead of ASYNC_BOOT_AUTOCONF

Changes from v5:
	- Used Spreadtrum instead of SPRD in menus
	- Changed TTY name to 'ttyS'
	- Moved uart_register_driver() to probe()
	- Added spinlock as needed
	- Removed register states saving and restoring in suspend() and resume()

Chunyan Zhang (2):
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  tty/serial: Add Spreadtrum sc9836-uart driver support

 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 drivers/tty/serial/Kconfig                         |   18 +
 drivers/tty/serial/Makefile                        |    1 +
 drivers/tty/serial/sprd_serial.c                   |  797 ++++++++++++++++++++
 include/uapi/linux/serial_core.h                   |    3 +
 7 files changed, 838 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt
 create mode 100644 drivers/tty/serial/sprd_serial.c

-- 
1.7.9.5

[PATCH v8 1/2] Documentation: DT: Add bindings for Spreadtrum SoC Platform

[Chunyan Zhang]

Adds Spreadtrum's prefix "sprd" to vendor-prefixes file.
Adds the devicetree binding documentations for Spreadtrum's sc9836-uart
and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC
Platform of Spreadtrum.

Signed-off-by: Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +++++++++++
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +++++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 3 files changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt

diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 0000000..31a629d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 0000000..2aff0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad..0a8384f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -153,6 +153,7 @@ snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 1/2] Documentation: DT: Add bindings for Spreadtrum SoC Platform

[Chunyan Zhang]

Adds Spreadtrum's prefix "sprd" to vendor-prefixes file.
Adds the devicetree binding documentations for Spreadtrum's sc9836-uart
and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC
Platform of Spreadtrum.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +++++++++++
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +++++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 3 files changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt

diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 0000000..31a629d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 0000000..2aff0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad..0a8384f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -153,6 +153,7 @@ snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
-- 
1.7.9.5

[PATCH v8 1/2] Documentation: DT: Add bindings for Spreadtrum SoC Platform

[Chunyan Zhang]

Adds Spreadtrum's prefix "sprd" to vendor-prefixes file.
Adds the devicetree binding documentations for Spreadtrum's sc9836-uart
and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC
Platform of Spreadtrum.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +++++++++++
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +++++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 3 files changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt

diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 0000000..31a629d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 0000000..2aff0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad..0a8384f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -153,6 +153,7 @@ snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
-- 
1.7.9.5

[PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Chunyan Zhang]

Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.

Originally-by: Lanqing Liu <lanqing.liu-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
Signed-off-by: Orson Zhai <orson.zhai-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
Signed-off-by: Chunyan Zhang <chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
---
 drivers/tty/serial/Kconfig       |   18 +
 drivers/tty/serial/Makefile      |    1 +
 drivers/tty/serial/sprd_serial.c |  797 ++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/serial_core.h |    3 +
 4 files changed, 819 insertions(+)
 create mode 100644 drivers/tty/serial/sprd_serial.c

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c79b43c..13211f7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1577,6 +1577,24 @@ config SERIAL_MEN_Z135
 	  This driver can also be build as a module. If so, the module will be called
 	  men_z135_uart.ko
 
+config SERIAL_SPRD
+	tristate "Support for Spreadtrum serial"
+	depends on ARCH_SPRD
+	select SERIAL_CORE
+	help
+	  This enables the driver for the Spreadtrum's serial.
+
+config SERIAL_SPRD_CONSOLE
+	bool "Spreadtrum UART console support"
+	depends on SERIAL_SPRD=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using Spreadtrum's serial. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 9a548ac..4801aca 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
 obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
 obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
+obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
new file mode 100644
index 0000000..bbd0447
--- /dev/null
+++ b/drivers/tty/serial/sprd_serial.c
@@ -0,0 +1,797 @@
+/*
+ * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+/* device name */
+#define UART_NR_MAX		8
+#define SPRD_TTY_NAME		"ttyS"
+#define SPRD_FIFO_SIZE		128
+#define SPRD_DEF_RATE		26000000
+#define SPRD_BAUD_IO_LIMIT	3000000
+#define SPRD_TIMEOUT		256
+
+/* the offset of serial registers and BITs for them */
+/* data registers */
+#define SPRD_TXD		0x0000
+#define SPRD_RXD		0x0004
+
+/* line status register and its BITs  */
+#define SPRD_LSR		0x0008
+#define SPRD_LSR_OE		BIT(4)
+#define SPRD_LSR_FE		BIT(3)
+#define SPRD_LSR_PE		BIT(2)
+#define SPRD_LSR_BI		BIT(7)
+#define SPRD_LSR_TX_OVER	BIT(15)
+
+/* data number in TX and RX fifo */
+#define SPRD_STS1		0x000C
+
+/* interrupt enable register and its BITs */
+#define SPRD_IEN		0x0010
+#define SPRD_IEN_RX_FULL	BIT(0)
+#define SPRD_IEN_TX_EMPTY	BIT(1)
+#define SPRD_IEN_BREAK_DETECT	BIT(7)
+#define SPRD_IEN_TIMEOUT	BIT(13)
+
+/* interrupt clear register */
+#define SPRD_ICLR		0x0014
+
+/* line control register */
+#define SPRD_LCR		0x0018
+#define SPRD_LCR_STOP_1BIT	0x10
+#define SPRD_LCR_STOP_2BIT	0x30
+#define SPRD_LCR_DATA_LEN	(BIT(2) | BIT(3))
+#define SPRD_LCR_DATA_LEN5	0x0
+#define SPRD_LCR_DATA_LEN6	0x4
+#define SPRD_LCR_DATA_LEN7	0x8
+#define SPRD_LCR_DATA_LEN8	0xc
+#define SPRD_LCR_PARITY	(BIT(0) | BIT(1))
+#define SPRD_LCR_PARITY_EN	0x2
+#define SPRD_LCR_EVEN_PAR	0x0
+#define SPRD_LCR_ODD_PAR	0x1
+
+/* control register 1 */
+#define SPRD_CTL1			0x001C
+#define RX_HW_FLOW_CTL_THLD	BIT(6)
+#define RX_HW_FLOW_CTL_EN	BIT(7)
+#define TX_HW_FLOW_CTL_EN	BIT(8)
+#define RX_TOUT_THLD_DEF	0x3E00
+#define RX_HFC_THLD_DEF	0x40
+
+/* fifo threshold register */
+#define SPRD_CTL2		0x0020
+#define THLD_TX_EMPTY	0x40
+#define THLD_RX_FULL	0x40
+
+/* config baud rate register */
+#define SPRD_CLKD0		0x0024
+#define SPRD_CLKD1		0x0028
+
+/* interrupt mask status register */
+#define SPRD_IMSR			0x002C
+#define SPRD_IMSR_RX_FIFO_FULL		BIT(0)
+#define SPRD_IMSR_TX_FIFO_EMPTY	BIT(1)
+#define SPRD_IMSR_BREAK_DETECT		BIT(7)
+#define SPRD_IMSR_TIMEOUT		BIT(13)
+
+struct reg_backup {
+	u32 ien;
+	u32 ctrl0;
+	u32 ctrl1;
+	u32 ctrl2;
+	u32 clkd0;
+	u32 clkd1;
+	u32 dspwait;
+};
+
+struct sprd_uart_port {
+	struct uart_port port;
+	struct reg_backup reg_bak;
+	char name[16];
+};
+
+static struct sprd_uart_port *sprd_port[UART_NR_MAX];
+static int sprd_ports_num;
+
+static inline unsigned int serial_in(struct uart_port *port, int offset)
+{
+	return readl_relaxed(port->membase + offset);
+}
+
+static inline void serial_out(struct uart_port *port, int offset, int value)
+{
+	writel_relaxed(value, port->membase + offset);
+}
+
+static unsigned int sprd_tx_empty(struct uart_port *port)
+{
+	if (serial_in(port, SPRD_STS1) & 0xff00)
+		return 0;
+	else
+		return TIOCSER_TEMT;
+}
+
+static unsigned int sprd_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_DSR | TIOCM_CTS;
+}
+
+static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* nothing to do */
+}
+
+static void sprd_stop_tx(struct uart_port *port)
+{
+	unsigned int ien, iclr;
+
+	iclr = serial_in(port, SPRD_ICLR);
+	ien = serial_in(port, SPRD_IEN);
+
+	iclr |= SPRD_IEN_TX_EMPTY;
+	ien &= ~SPRD_IEN_TX_EMPTY;
+
+	serial_out(port, SPRD_ICLR, iclr);
+	serial_out(port, SPRD_IEN, ien);
+}
+
+static void sprd_start_tx(struct uart_port *port)
+{
+	unsigned int ien;
+
+	ien = serial_in(port, SPRD_IEN);
+	if (!(ien & SPRD_IEN_TX_EMPTY)) {
+		ien |= SPRD_IEN_TX_EMPTY;
+		serial_out(port, SPRD_IEN, ien);
+	}
+}
+
+static void sprd_stop_rx(struct uart_port *port)
+{
+	unsigned int ien, iclr;
+
+	iclr = serial_in(port, SPRD_ICLR);
+	ien = serial_in(port, SPRD_IEN);
+
+	ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
+	iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
+
+	serial_out(port, SPRD_IEN, ien);
+	serial_out(port, SPRD_ICLR, iclr);
+}
+
+/* The Sprd serial does not support this function. */
+static void sprd_break_ctl(struct uart_port *port, int break_state)
+{
+	/* nothing to do */
+}
+
+static int handle_lsr_errors(struct uart_port *port,
+			     unsigned int *flag,
+			     unsigned int *lsr)
+{
+	int ret = 0;
+
+	/* statistics */
+	if (*lsr & SPRD_LSR_BI) {
+		*lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
+		port->icount.brk++;
+		ret = uart_handle_break(port);
+		if (ret)
+			return ret;
+	} else if (*lsr & SPRD_LSR_PE)
+		port->icount.parity++;
+	else if (*lsr & SPRD_LSR_FE)
+		port->icount.frame++;
+	if (*lsr & SPRD_LSR_OE)
+		port->icount.overrun++;
+
+	/* mask off conditions which should be ignored */
+	*lsr &= port->read_status_mask;
+	if (*lsr & SPRD_LSR_BI)
+		*flag = TTY_BREAK;
+	else if (*lsr & SPRD_LSR_PE)
+		*flag = TTY_PARITY;
+	else if (*lsr & SPRD_LSR_FE)
+		*flag = TTY_FRAME;
+
+	return ret;
+}
+
+static inline void sprd_rx(struct uart_port *port)
+{
+	struct tty_port *tty = &port->state->port;
+	unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
+
+	while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
+		lsr = serial_in(port, SPRD_LSR);
+		ch = serial_in(port, SPRD_RXD);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
+			SPRD_LSR_FE | SPRD_LSR_OE))
+			if (handle_lsr_errors(port, &lsr, &flag))
+				continue;
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+
+		uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static inline void sprd_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	if (port->x_char) {
+		serial_out(port, SPRD_TXD, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		sprd_stop_tx(port);
+		return;
+	}
+
+	count = THLD_TX_EMPTY;
+	do {
+		serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		sprd_stop_tx(port);
+}
+
+/* this handles the interrupt from one port */
+static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned int ims;
+
+	spin_lock(&port->lock);
+
+	ims = serial_in(port, SPRD_IMSR);
+
+	if (!ims)
+		return IRQ_NONE;
+
+	serial_out(port, SPRD_ICLR, ~0);
+
+	if (ims & (SPRD_IMSR_RX_FIFO_FULL |
+		SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
+		sprd_rx(port);
+
+	if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
+		sprd_tx(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int sprd_startup(struct uart_port *port)
+{
+	int ret = 0;
+	unsigned int ien, fc;
+	unsigned int timeout;
+	struct sprd_uart_port *sp;
+	unsigned long flags;
+
+	serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
+
+	/* clear rx fifo */
+	timeout = SPRD_TIMEOUT;
+	while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)
+		serial_in(port, SPRD_RXD);
+
+	/* clear tx fifo */
+	timeout = SPRD_TIMEOUT;
+	while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)
+		cpu_relax();
+
+	/* clear interrupt */
+	serial_out(port, SPRD_IEN, 0);
+	serial_out(port, SPRD_ICLR, ~0);
+
+	/* allocate irq */
+	sp = container_of(port, struct sprd_uart_port, port);
+	snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
+	ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
+				IRQF_SHARED, sp->name, port);
+	if (ret) {
+		dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
+			port->irq, ret);
+		return ret;
+	}
+	fc = serial_in(port, SPRD_CTL1);
+	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+	serial_out(port, SPRD_CTL1, fc);
+
+	/* enable interrupt */
+	spin_lock_irqsave(&port->lock, flags);
+	ien = serial_in(port, SPRD_IEN);
+	ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
+	serial_out(port, SPRD_IEN, ien);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void sprd_shutdown(struct uart_port *port)
+{
+	serial_out(port, SPRD_IEN, 0);
+	serial_out(port, SPRD_ICLR, ~0);
+	devm_free_irq(port->dev, port->irq, port);
+}
+
+static void sprd_set_termios(struct uart_port *port,
+				    struct ktermios *termios,
+				    struct ktermios *old)
+{
+	unsigned int baud, quot;
+	unsigned int lcr = 0, fc;
+	unsigned long flags;
+
+	/* ask the core to calculate the divisor for us */
+	baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
+
+	quot = (unsigned int)((port->uartclk + baud / 2) / baud);
+
+	/* set data length */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr |= SPRD_LCR_DATA_LEN5;
+		break;
+	case CS6:
+		lcr |= SPRD_LCR_DATA_LEN6;
+		break;
+	case CS7:
+		lcr |= SPRD_LCR_DATA_LEN7;
+		break;
+	case CS8:
+	default:
+		lcr |= SPRD_LCR_DATA_LEN8;
+		break;
+	}
+
+	/* calculate stop bits */
+	lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
+	if (termios->c_cflag & CSTOPB)
+		lcr |= SPRD_LCR_STOP_2BIT;
+	else
+		lcr |= SPRD_LCR_STOP_1BIT;
+
+	/* calculate parity */
+	lcr &= ~SPRD_LCR_PARITY;
+	termios->c_cflag &= ~CMSPAR;	/* no support mark/space */
+	if (termios->c_cflag & PARENB) {
+		lcr |= SPRD_LCR_PARITY_EN;
+		if (termios->c_cflag & PARODD)
+			lcr |= SPRD_LCR_ODD_PAR;
+		else
+			lcr |= SPRD_LCR_EVEN_PAR;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* update the per-port timeout */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = SPRD_LSR_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		port->read_status_mask |= SPRD_LSR_BI;
+
+	/* characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= SPRD_LSR_BI;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= SPRD_LSR_OE;
+	}
+
+	/* flow control */
+	fc = serial_in(port, SPRD_CTL1);
+	fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
+	if (termios->c_cflag & CRTSCTS) {
+		fc |= RX_HW_FLOW_CTL_THLD;
+		fc |= RX_HW_FLOW_CTL_EN;
+		fc |= TX_HW_FLOW_CTL_EN;
+	}
+
+	/* clock divider bit0~bit15 */
+	serial_out(port, SPRD_CLKD0, quot & 0xffff);
+
+	/* clock divider bit16~bit20 */
+	serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
+	serial_out(port, SPRD_LCR, lcr);
+	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+	serial_out(port, SPRD_CTL1, fc);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *sprd_type(struct uart_port *port)
+{
+	return "SPX";
+}
+
+static void sprd_release_port(struct uart_port *port)
+{
+	/* nothing to do */
+}
+
+static int sprd_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void sprd_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_SPRD;
+}
+
+static int sprd_verify_port(struct uart_port *port,
+				   struct serial_struct *ser)
+{
+	if (ser->type != PORT_SPRD)
+		return -EINVAL;
+	if (port->irq != ser->irq)
+		return -EINVAL;
+	return 0;
+}
+
+static struct uart_ops serial_sprd_ops = {
+	.tx_empty = sprd_tx_empty,
+	.get_mctrl = sprd_get_mctrl,
+	.set_mctrl = sprd_set_mctrl,
+	.stop_tx = sprd_stop_tx,
+	.start_tx = sprd_start_tx,
+	.stop_rx = sprd_stop_rx,
+	.break_ctl = sprd_break_ctl,
+	.startup = sprd_startup,
+	.shutdown = sprd_shutdown,
+	.set_termios = sprd_set_termios,
+	.type = sprd_type,
+	.release_port = sprd_release_port,
+	.request_port = sprd_request_port,
+	.config_port = sprd_config_port,
+	.verify_port = sprd_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SPRD_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int status, tmout = 10000;
+
+	/* wait up to 10ms for the character(s) to be sent */
+	do {
+		status = serial_in(port, SPRD_STS1);
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (status & 0xff00);
+}
+
+static void sprd_console_putchar(struct uart_port *port, int ch)
+{
+	wait_for_xmitr(port);
+	serial_out(port, SPRD_TXD, ch);
+}
+
+static void sprd_console_write(struct console *co, const char *s,
+				      unsigned int count)
+{
+	struct uart_port *port = &sprd_port[co->index]->port;
+	int locked = 1;
+	unsigned long flags;
+
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock_irqsave(&port->lock, flags);
+	else
+		spin_lock_irqsave(&port->lock, flags);
+
+	uart_console_write(port, s, count, sprd_console_putchar);
+
+	/* wait for transmitter to become empty */
+	wait_for_xmitr(port);
+
+	if (locked)
+		spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int __init sprd_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= UART_NR_MAX || co->index < 0)
+		co->index = 0;
+
+	port = &sprd_port[co->index]->port;
+	if (port == NULL) {
+		pr_info("serial port %d not yet initialized\n", co->index);
+		return -ENODEV;
+	}
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver sprd_uart_driver;
+static struct console sprd_console = {
+	.name = SPRD_TTY_NAME,
+	.write = sprd_console_write,
+	.device = uart_console_device,
+	.setup = sprd_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &sprd_uart_driver,
+};
+
+#define SPRD_CONSOLE	(&sprd_console)
+
+/* Support for earlycon */
+static void sprd_putc(struct uart_port *port, int c)
+{
+	unsigned int timeout = SPRD_TIMEOUT;
+
+	while (timeout-- &&
+		   !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
+		cpu_relax();
+
+	writeb(c, port->membase + SPRD_TXD);
+}
+
+static void sprd_early_write(struct console *con, const char *s,
+				    unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, sprd_putc);
+}
+
+static int __init sprd_early_console_setup(
+				struct earlycon_device *device,
+				const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = sprd_early_write;
+	return 0;
+}
+
+EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
+OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
+		    sprd_early_console_setup);
+
+#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
+#define SPRD_CONSOLE		NULL
+#endif
+
+static struct uart_driver sprd_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "sprd_serial",
+	.dev_name = SPRD_TTY_NAME,
+	.major = 0,
+	.minor = 0,
+	.nr = UART_NR_MAX,
+	.cons = SPRD_CONSOLE,
+};
+
+static int sprd_probe_dt_alias(int index, struct device *dev)
+{
+	struct device_node *np;
+	static bool seen_dev_with_alias;
+	static bool seen_dev_without_alias;
+	int ret = index;
+
+	if (!IS_ENABLED(CONFIG_OF))
+		return ret;
+
+	np = dev->of_node;
+	if (!np)
+		return ret;
+
+	ret = of_alias_get_id(np, "serial");
+	if (IS_ERR_VALUE(ret)) {
+		seen_dev_without_alias = true;
+		ret = index;
+	} else {
+		seen_dev_with_alias = true;
+		if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
+			dev_warn(dev, "requested serial port %d  not available.\n", ret);
+			ret = index;
+		}
+	}
+
+	return ret;
+}
+
+static int sprd_remove(struct platform_device *dev)
+{
+	struct sprd_uart_port *sup = platform_get_drvdata(dev);
+
+	if (sup) {
+		uart_remove_one_port(&sprd_uart_driver, &sup->port);
+		sprd_port[sup->port.line] = NULL;
+		sprd_ports_num--;
+	}
+
+	if (!sprd_ports_num)
+		uart_unregister_driver(&sprd_uart_driver);
+
+	return 0;
+}
+
+static int sprd_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct uart_port *up;
+	struct clk *clk;
+	int irq;
+	int index;
+	int ret;
+
+	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
+		if (sprd_port[index] == NULL)
+			break;
+
+	if (index == ARRAY_SIZE(sprd_port))
+		return -EBUSY;
+
+	index = sprd_probe_dt_alias(index, &pdev->dev);
+
+	sprd_port[index] = devm_kzalloc(&pdev->dev,
+		sizeof(*sprd_port[index]), GFP_KERNEL);
+	if (!sprd_port[index])
+		return -ENOMEM;
+
+	pdev->id = index;
+
+	up = &sprd_port[index]->port;
+	up->dev = &pdev->dev;
+	up->line = index;
+	up->type = PORT_SPRD;
+	up->iotype = SERIAL_IO_PORT;
+	up->uartclk = SPRD_DEF_RATE;
+	up->fifosize = SPRD_FIFO_SIZE;
+	up->ops = &serial_sprd_ops;
+	up->flags = UPF_BOOT_AUTOCONF;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk))
+		up->uartclk = clk_get_rate(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "not provide mem resource\n");
+		return -ENODEV;
+	}
+	up->mapbase = res->start;
+	up->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(up->membase))
+		return PTR_ERR(up->membase);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "not provide irq resource\n");
+		return -ENODEV;
+	}
+	up->irq = irq;
+
+	if (!sprd_ports_num) {
+		ret = uart_register_driver(&sprd_uart_driver);
+		if (ret < 0) {
+			pr_err("Failed to register SPRD-UART driver\n");
+			return ret;
+		}
+	}
+	sprd_ports_num++;
+
+	ret = uart_add_one_port(&sprd_uart_driver, up);
+	if (ret) {
+		sprd_port[index] = NULL;
+		sprd_remove(pdev);
+	}
+
+	platform_set_drvdata(pdev, up);
+
+	return ret;
+}
+
+static int sprd_suspend(struct device *dev)
+{
+	struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+	uart_suspend_port(&sprd_uart_driver, &sup->port);
+
+	return 0;
+}
+
+static int sprd_resume(struct device *dev)
+{
+	struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+	uart_resume_port(&sprd_uart_driver, &sup->port);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
+
+static const struct of_device_id serial_ids[] = {
+	{.compatible = "sprd,sc9836-uart",},
+	{}
+};
+
+static struct platform_driver sprd_platform_driver = {
+	.probe		= sprd_probe,
+	.remove		= sprd_remove,
+	.driver		= {
+		.name	= "sprd_serial",
+		.of_match_table = of_match_ptr(serial_ids),
+		.pm	= &sprd_pm_ops,
+	},
+};
+
+module_platform_driver(sprd_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c172180..7e6eb39 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -248,4 +248,7 @@
 /* MESON */
 #define PORT_MESON	109
 
+/* SPRD SERIAL  */
+#define PORT_SPRD	110
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Chunyan Zhang]

Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.

Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/Kconfig       |   18 +
 drivers/tty/serial/Makefile      |    1 +
 drivers/tty/serial/sprd_serial.c |  797 ++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/serial_core.h |    3 +
 4 files changed, 819 insertions(+)
 create mode 100644 drivers/tty/serial/sprd_serial.c

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c79b43c..13211f7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1577,6 +1577,24 @@ config SERIAL_MEN_Z135
 	  This driver can also be build as a module. If so, the module will be called
 	  men_z135_uart.ko
 
+config SERIAL_SPRD
+	tristate "Support for Spreadtrum serial"
+	depends on ARCH_SPRD
+	select SERIAL_CORE
+	help
+	  This enables the driver for the Spreadtrum's serial.
+
+config SERIAL_SPRD_CONSOLE
+	bool "Spreadtrum UART console support"
+	depends on SERIAL_SPRD=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using Spreadtrum's serial. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 9a548ac..4801aca 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
 obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
 obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
+obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
new file mode 100644
index 0000000..bbd0447
--- /dev/null
+++ b/drivers/tty/serial/sprd_serial.c
@@ -0,0 +1,797 @@
+/*
+ * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+/* device name */
+#define UART_NR_MAX		8
+#define SPRD_TTY_NAME		"ttyS"
+#define SPRD_FIFO_SIZE		128
+#define SPRD_DEF_RATE		26000000
+#define SPRD_BAUD_IO_LIMIT	3000000
+#define SPRD_TIMEOUT		256
+
+/* the offset of serial registers and BITs for them */
+/* data registers */
+#define SPRD_TXD		0x0000
+#define SPRD_RXD		0x0004
+
+/* line status register and its BITs  */
+#define SPRD_LSR		0x0008
+#define SPRD_LSR_OE		BIT(4)
+#define SPRD_LSR_FE		BIT(3)
+#define SPRD_LSR_PE		BIT(2)
+#define SPRD_LSR_BI		BIT(7)
+#define SPRD_LSR_TX_OVER	BIT(15)
+
+/* data number in TX and RX fifo */
+#define SPRD_STS1		0x000C
+
+/* interrupt enable register and its BITs */
+#define SPRD_IEN		0x0010
+#define SPRD_IEN_RX_FULL	BIT(0)
+#define SPRD_IEN_TX_EMPTY	BIT(1)
+#define SPRD_IEN_BREAK_DETECT	BIT(7)
+#define SPRD_IEN_TIMEOUT	BIT(13)
+
+/* interrupt clear register */
+#define SPRD_ICLR		0x0014
+
+/* line control register */
+#define SPRD_LCR		0x0018
+#define SPRD_LCR_STOP_1BIT	0x10
+#define SPRD_LCR_STOP_2BIT	0x30
+#define SPRD_LCR_DATA_LEN	(BIT(2) | BIT(3))
+#define SPRD_LCR_DATA_LEN5	0x0
+#define SPRD_LCR_DATA_LEN6	0x4
+#define SPRD_LCR_DATA_LEN7	0x8
+#define SPRD_LCR_DATA_LEN8	0xc
+#define SPRD_LCR_PARITY	(BIT(0) | BIT(1))
+#define SPRD_LCR_PARITY_EN	0x2
+#define SPRD_LCR_EVEN_PAR	0x0
+#define SPRD_LCR_ODD_PAR	0x1
+
+/* control register 1 */
+#define SPRD_CTL1			0x001C
+#define RX_HW_FLOW_CTL_THLD	BIT(6)
+#define RX_HW_FLOW_CTL_EN	BIT(7)
+#define TX_HW_FLOW_CTL_EN	BIT(8)
+#define RX_TOUT_THLD_DEF	0x3E00
+#define RX_HFC_THLD_DEF	0x40
+
+/* fifo threshold register */
+#define SPRD_CTL2		0x0020
+#define THLD_TX_EMPTY	0x40
+#define THLD_RX_FULL	0x40
+
+/* config baud rate register */
+#define SPRD_CLKD0		0x0024
+#define SPRD_CLKD1		0x0028
+
+/* interrupt mask status register */
+#define SPRD_IMSR			0x002C
+#define SPRD_IMSR_RX_FIFO_FULL		BIT(0)
+#define SPRD_IMSR_TX_FIFO_EMPTY	BIT(1)
+#define SPRD_IMSR_BREAK_DETECT		BIT(7)
+#define SPRD_IMSR_TIMEOUT		BIT(13)
+
+struct reg_backup {
+	u32 ien;
+	u32 ctrl0;
+	u32 ctrl1;
+	u32 ctrl2;
+	u32 clkd0;
+	u32 clkd1;
+	u32 dspwait;
+};
+
+struct sprd_uart_port {
+	struct uart_port port;
+	struct reg_backup reg_bak;
+	char name[16];
+};
+
+static struct sprd_uart_port *sprd_port[UART_NR_MAX];
+static int sprd_ports_num;
+
+static inline unsigned int serial_in(struct uart_port *port, int offset)
+{
+	return readl_relaxed(port->membase + offset);
+}
+
+static inline void serial_out(struct uart_port *port, int offset, int value)
+{
+	writel_relaxed(value, port->membase + offset);
+}
+
+static unsigned int sprd_tx_empty(struct uart_port *port)
+{
+	if (serial_in(port, SPRD_STS1) & 0xff00)
+		return 0;
+	else
+		return TIOCSER_TEMT;
+}
+
+static unsigned int sprd_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_DSR | TIOCM_CTS;
+}
+
+static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* nothing to do */
+}
+
+static void sprd_stop_tx(struct uart_port *port)
+{
+	unsigned int ien, iclr;
+
+	iclr = serial_in(port, SPRD_ICLR);
+	ien = serial_in(port, SPRD_IEN);
+
+	iclr |= SPRD_IEN_TX_EMPTY;
+	ien &= ~SPRD_IEN_TX_EMPTY;
+
+	serial_out(port, SPRD_ICLR, iclr);
+	serial_out(port, SPRD_IEN, ien);
+}
+
+static void sprd_start_tx(struct uart_port *port)
+{
+	unsigned int ien;
+
+	ien = serial_in(port, SPRD_IEN);
+	if (!(ien & SPRD_IEN_TX_EMPTY)) {
+		ien |= SPRD_IEN_TX_EMPTY;
+		serial_out(port, SPRD_IEN, ien);
+	}
+}
+
+static void sprd_stop_rx(struct uart_port *port)
+{
+	unsigned int ien, iclr;
+
+	iclr = serial_in(port, SPRD_ICLR);
+	ien = serial_in(port, SPRD_IEN);
+
+	ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
+	iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
+
+	serial_out(port, SPRD_IEN, ien);
+	serial_out(port, SPRD_ICLR, iclr);
+}
+
+/* The Sprd serial does not support this function. */
+static void sprd_break_ctl(struct uart_port *port, int break_state)
+{
+	/* nothing to do */
+}
+
+static int handle_lsr_errors(struct uart_port *port,
+			     unsigned int *flag,
+			     unsigned int *lsr)
+{
+	int ret = 0;
+
+	/* statistics */
+	if (*lsr & SPRD_LSR_BI) {
+		*lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
+		port->icount.brk++;
+		ret = uart_handle_break(port);
+		if (ret)
+			return ret;
+	} else if (*lsr & SPRD_LSR_PE)
+		port->icount.parity++;
+	else if (*lsr & SPRD_LSR_FE)
+		port->icount.frame++;
+	if (*lsr & SPRD_LSR_OE)
+		port->icount.overrun++;
+
+	/* mask off conditions which should be ignored */
+	*lsr &= port->read_status_mask;
+	if (*lsr & SPRD_LSR_BI)
+		*flag = TTY_BREAK;
+	else if (*lsr & SPRD_LSR_PE)
+		*flag = TTY_PARITY;
+	else if (*lsr & SPRD_LSR_FE)
+		*flag = TTY_FRAME;
+
+	return ret;
+}
+
+static inline void sprd_rx(struct uart_port *port)
+{
+	struct tty_port *tty = &port->state->port;
+	unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
+
+	while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
+		lsr = serial_in(port, SPRD_LSR);
+		ch = serial_in(port, SPRD_RXD);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
+			SPRD_LSR_FE | SPRD_LSR_OE))
+			if (handle_lsr_errors(port, &lsr, &flag))
+				continue;
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+
+		uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static inline void sprd_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	if (port->x_char) {
+		serial_out(port, SPRD_TXD, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		sprd_stop_tx(port);
+		return;
+	}
+
+	count = THLD_TX_EMPTY;
+	do {
+		serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		sprd_stop_tx(port);
+}
+
+/* this handles the interrupt from one port */
+static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned int ims;
+
+	spin_lock(&port->lock);
+
+	ims = serial_in(port, SPRD_IMSR);
+
+	if (!ims)
+		return IRQ_NONE;
+
+	serial_out(port, SPRD_ICLR, ~0);
+
+	if (ims & (SPRD_IMSR_RX_FIFO_FULL |
+		SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
+		sprd_rx(port);
+
+	if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
+		sprd_tx(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int sprd_startup(struct uart_port *port)
+{
+	int ret = 0;
+	unsigned int ien, fc;
+	unsigned int timeout;
+	struct sprd_uart_port *sp;
+	unsigned long flags;
+
+	serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
+
+	/* clear rx fifo */
+	timeout = SPRD_TIMEOUT;
+	while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)
+		serial_in(port, SPRD_RXD);
+
+	/* clear tx fifo */
+	timeout = SPRD_TIMEOUT;
+	while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)
+		cpu_relax();
+
+	/* clear interrupt */
+	serial_out(port, SPRD_IEN, 0);
+	serial_out(port, SPRD_ICLR, ~0);
+
+	/* allocate irq */
+	sp = container_of(port, struct sprd_uart_port, port);
+	snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
+	ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
+				IRQF_SHARED, sp->name, port);
+	if (ret) {
+		dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
+			port->irq, ret);
+		return ret;
+	}
+	fc = serial_in(port, SPRD_CTL1);
+	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+	serial_out(port, SPRD_CTL1, fc);
+
+	/* enable interrupt */
+	spin_lock_irqsave(&port->lock, flags);
+	ien = serial_in(port, SPRD_IEN);
+	ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
+	serial_out(port, SPRD_IEN, ien);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void sprd_shutdown(struct uart_port *port)
+{
+	serial_out(port, SPRD_IEN, 0);
+	serial_out(port, SPRD_ICLR, ~0);
+	devm_free_irq(port->dev, port->irq, port);
+}
+
+static void sprd_set_termios(struct uart_port *port,
+				    struct ktermios *termios,
+				    struct ktermios *old)
+{
+	unsigned int baud, quot;
+	unsigned int lcr = 0, fc;
+	unsigned long flags;
+
+	/* ask the core to calculate the divisor for us */
+	baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
+
+	quot = (unsigned int)((port->uartclk + baud / 2) / baud);
+
+	/* set data length */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr |= SPRD_LCR_DATA_LEN5;
+		break;
+	case CS6:
+		lcr |= SPRD_LCR_DATA_LEN6;
+		break;
+	case CS7:
+		lcr |= SPRD_LCR_DATA_LEN7;
+		break;
+	case CS8:
+	default:
+		lcr |= SPRD_LCR_DATA_LEN8;
+		break;
+	}
+
+	/* calculate stop bits */
+	lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
+	if (termios->c_cflag & CSTOPB)
+		lcr |= SPRD_LCR_STOP_2BIT;
+	else
+		lcr |= SPRD_LCR_STOP_1BIT;
+
+	/* calculate parity */
+	lcr &= ~SPRD_LCR_PARITY;
+	termios->c_cflag &= ~CMSPAR;	/* no support mark/space */
+	if (termios->c_cflag & PARENB) {
+		lcr |= SPRD_LCR_PARITY_EN;
+		if (termios->c_cflag & PARODD)
+			lcr |= SPRD_LCR_ODD_PAR;
+		else
+			lcr |= SPRD_LCR_EVEN_PAR;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* update the per-port timeout */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = SPRD_LSR_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		port->read_status_mask |= SPRD_LSR_BI;
+
+	/* characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= SPRD_LSR_BI;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= SPRD_LSR_OE;
+	}
+
+	/* flow control */
+	fc = serial_in(port, SPRD_CTL1);
+	fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
+	if (termios->c_cflag & CRTSCTS) {
+		fc |= RX_HW_FLOW_CTL_THLD;
+		fc |= RX_HW_FLOW_CTL_EN;
+		fc |= TX_HW_FLOW_CTL_EN;
+	}
+
+	/* clock divider bit0~bit15 */
+	serial_out(port, SPRD_CLKD0, quot & 0xffff);
+
+	/* clock divider bit16~bit20 */
+	serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
+	serial_out(port, SPRD_LCR, lcr);
+	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+	serial_out(port, SPRD_CTL1, fc);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *sprd_type(struct uart_port *port)
+{
+	return "SPX";
+}
+
+static void sprd_release_port(struct uart_port *port)
+{
+	/* nothing to do */
+}
+
+static int sprd_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void sprd_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_SPRD;
+}
+
+static int sprd_verify_port(struct uart_port *port,
+				   struct serial_struct *ser)
+{
+	if (ser->type != PORT_SPRD)
+		return -EINVAL;
+	if (port->irq != ser->irq)
+		return -EINVAL;
+	return 0;
+}
+
+static struct uart_ops serial_sprd_ops = {
+	.tx_empty = sprd_tx_empty,
+	.get_mctrl = sprd_get_mctrl,
+	.set_mctrl = sprd_set_mctrl,
+	.stop_tx = sprd_stop_tx,
+	.start_tx = sprd_start_tx,
+	.stop_rx = sprd_stop_rx,
+	.break_ctl = sprd_break_ctl,
+	.startup = sprd_startup,
+	.shutdown = sprd_shutdown,
+	.set_termios = sprd_set_termios,
+	.type = sprd_type,
+	.release_port = sprd_release_port,
+	.request_port = sprd_request_port,
+	.config_port = sprd_config_port,
+	.verify_port = sprd_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SPRD_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int status, tmout = 10000;
+
+	/* wait up to 10ms for the character(s) to be sent */
+	do {
+		status = serial_in(port, SPRD_STS1);
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (status & 0xff00);
+}
+
+static void sprd_console_putchar(struct uart_port *port, int ch)
+{
+	wait_for_xmitr(port);
+	serial_out(port, SPRD_TXD, ch);
+}
+
+static void sprd_console_write(struct console *co, const char *s,
+				      unsigned int count)
+{
+	struct uart_port *port = &sprd_port[co->index]->port;
+	int locked = 1;
+	unsigned long flags;
+
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock_irqsave(&port->lock, flags);
+	else
+		spin_lock_irqsave(&port->lock, flags);
+
+	uart_console_write(port, s, count, sprd_console_putchar);
+
+	/* wait for transmitter to become empty */
+	wait_for_xmitr(port);
+
+	if (locked)
+		spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int __init sprd_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= UART_NR_MAX || co->index < 0)
+		co->index = 0;
+
+	port = &sprd_port[co->index]->port;
+	if (port == NULL) {
+		pr_info("serial port %d not yet initialized\n", co->index);
+		return -ENODEV;
+	}
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver sprd_uart_driver;
+static struct console sprd_console = {
+	.name = SPRD_TTY_NAME,
+	.write = sprd_console_write,
+	.device = uart_console_device,
+	.setup = sprd_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &sprd_uart_driver,
+};
+
+#define SPRD_CONSOLE	(&sprd_console)
+
+/* Support for earlycon */
+static void sprd_putc(struct uart_port *port, int c)
+{
+	unsigned int timeout = SPRD_TIMEOUT;
+
+	while (timeout-- &&
+		   !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
+		cpu_relax();
+
+	writeb(c, port->membase + SPRD_TXD);
+}
+
+static void sprd_early_write(struct console *con, const char *s,
+				    unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, sprd_putc);
+}
+
+static int __init sprd_early_console_setup(
+				struct earlycon_device *device,
+				const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = sprd_early_write;
+	return 0;
+}
+
+EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
+OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
+		    sprd_early_console_setup);
+
+#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
+#define SPRD_CONSOLE		NULL
+#endif
+
+static struct uart_driver sprd_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "sprd_serial",
+	.dev_name = SPRD_TTY_NAME,
+	.major = 0,
+	.minor = 0,
+	.nr = UART_NR_MAX,
+	.cons = SPRD_CONSOLE,
+};
+
+static int sprd_probe_dt_alias(int index, struct device *dev)
+{
+	struct device_node *np;
+	static bool seen_dev_with_alias;
+	static bool seen_dev_without_alias;
+	int ret = index;
+
+	if (!IS_ENABLED(CONFIG_OF))
+		return ret;
+
+	np = dev->of_node;
+	if (!np)
+		return ret;
+
+	ret = of_alias_get_id(np, "serial");
+	if (IS_ERR_VALUE(ret)) {
+		seen_dev_without_alias = true;
+		ret = index;
+	} else {
+		seen_dev_with_alias = true;
+		if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
+			dev_warn(dev, "requested serial port %d  not available.\n", ret);
+			ret = index;
+		}
+	}
+
+	return ret;
+}
+
+static int sprd_remove(struct platform_device *dev)
+{
+	struct sprd_uart_port *sup = platform_get_drvdata(dev);
+
+	if (sup) {
+		uart_remove_one_port(&sprd_uart_driver, &sup->port);
+		sprd_port[sup->port.line] = NULL;
+		sprd_ports_num--;
+	}
+
+	if (!sprd_ports_num)
+		uart_unregister_driver(&sprd_uart_driver);
+
+	return 0;
+}
+
+static int sprd_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct uart_port *up;
+	struct clk *clk;
+	int irq;
+	int index;
+	int ret;
+
+	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
+		if (sprd_port[index] == NULL)
+			break;
+
+	if (index == ARRAY_SIZE(sprd_port))
+		return -EBUSY;
+
+	index = sprd_probe_dt_alias(index, &pdev->dev);
+
+	sprd_port[index] = devm_kzalloc(&pdev->dev,
+		sizeof(*sprd_port[index]), GFP_KERNEL);
+	if (!sprd_port[index])
+		return -ENOMEM;
+
+	pdev->id = index;
+
+	up = &sprd_port[index]->port;
+	up->dev = &pdev->dev;
+	up->line = index;
+	up->type = PORT_SPRD;
+	up->iotype = SERIAL_IO_PORT;
+	up->uartclk = SPRD_DEF_RATE;
+	up->fifosize = SPRD_FIFO_SIZE;
+	up->ops = &serial_sprd_ops;
+	up->flags = UPF_BOOT_AUTOCONF;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk))
+		up->uartclk = clk_get_rate(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "not provide mem resource\n");
+		return -ENODEV;
+	}
+	up->mapbase = res->start;
+	up->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(up->membase))
+		return PTR_ERR(up->membase);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "not provide irq resource\n");
+		return -ENODEV;
+	}
+	up->irq = irq;
+
+	if (!sprd_ports_num) {
+		ret = uart_register_driver(&sprd_uart_driver);
+		if (ret < 0) {
+			pr_err("Failed to register SPRD-UART driver\n");
+			return ret;
+		}
+	}
+	sprd_ports_num++;
+
+	ret = uart_add_one_port(&sprd_uart_driver, up);
+	if (ret) {
+		sprd_port[index] = NULL;
+		sprd_remove(pdev);
+	}
+
+	platform_set_drvdata(pdev, up);
+
+	return ret;
+}
+
+static int sprd_suspend(struct device *dev)
+{
+	struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+	uart_suspend_port(&sprd_uart_driver, &sup->port);
+
+	return 0;
+}
+
+static int sprd_resume(struct device *dev)
+{
+	struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+	uart_resume_port(&sprd_uart_driver, &sup->port);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
+
+static const struct of_device_id serial_ids[] = {
+	{.compatible = "sprd,sc9836-uart",},
+	{}
+};
+
+static struct platform_driver sprd_platform_driver = {
+	.probe		= sprd_probe,
+	.remove		= sprd_remove,
+	.driver		= {
+		.name	= "sprd_serial",
+		.of_match_table = of_match_ptr(serial_ids),
+		.pm	= &sprd_pm_ops,
+	},
+};
+
+module_platform_driver(sprd_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c172180..7e6eb39 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -248,4 +248,7 @@
 /* MESON */
 #define PORT_MESON	109
 
+/* SPRD SERIAL  */
+#define PORT_SPRD	110
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.7.9.5

[PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Chunyan Zhang]

Add a full sc9836-uart driver for SC9836 SoC which is based on the
spreadtrum sharkl64 platform.
This driver also support earlycon.

Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com>
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/tty/serial/Kconfig       |   18 +
 drivers/tty/serial/Makefile      |    1 +
 drivers/tty/serial/sprd_serial.c |  797 ++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/serial_core.h |    3 +
 4 files changed, 819 insertions(+)
 create mode 100644 drivers/tty/serial/sprd_serial.c

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c79b43c..13211f7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1577,6 +1577,24 @@ config SERIAL_MEN_Z135
 	  This driver can also be build as a module. If so, the module will be called
 	  men_z135_uart.ko
 
+config SERIAL_SPRD
+	tristate "Support for Spreadtrum serial"
+	depends on ARCH_SPRD
+	select SERIAL_CORE
+	help
+	  This enables the driver for the Spreadtrum's serial.
+
+config SERIAL_SPRD_CONSOLE
+	bool "Spreadtrum UART console support"
+	depends on SERIAL_SPRD=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	help
+	  Support for early debug console using Spreadtrum's serial. This enables
+	  the console before standard serial driver is probed. This is enabled
+	  with "earlycon" on the kernel command line. The console is
+	  enabled when early_param is processed.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 9a548ac..4801aca 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
 obj-$(CONFIG_SERIAL_RP2)	+= rp2.o
 obj-$(CONFIG_SERIAL_FSL_LPUART)	+= fsl_lpuart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
+obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
new file mode 100644
index 0000000..bbd0447
--- /dev/null
+++ b/drivers/tty/serial/sprd_serial.c
@@ -0,0 +1,797 @@
+/*
+ * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+/* device name */
+#define UART_NR_MAX		8
+#define SPRD_TTY_NAME		"ttyS"
+#define SPRD_FIFO_SIZE		128
+#define SPRD_DEF_RATE		26000000
+#define SPRD_BAUD_IO_LIMIT	3000000
+#define SPRD_TIMEOUT		256
+
+/* the offset of serial registers and BITs for them */
+/* data registers */
+#define SPRD_TXD		0x0000
+#define SPRD_RXD		0x0004
+
+/* line status register and its BITs  */
+#define SPRD_LSR		0x0008
+#define SPRD_LSR_OE		BIT(4)
+#define SPRD_LSR_FE		BIT(3)
+#define SPRD_LSR_PE		BIT(2)
+#define SPRD_LSR_BI		BIT(7)
+#define SPRD_LSR_TX_OVER	BIT(15)
+
+/* data number in TX and RX fifo */
+#define SPRD_STS1		0x000C
+
+/* interrupt enable register and its BITs */
+#define SPRD_IEN		0x0010
+#define SPRD_IEN_RX_FULL	BIT(0)
+#define SPRD_IEN_TX_EMPTY	BIT(1)
+#define SPRD_IEN_BREAK_DETECT	BIT(7)
+#define SPRD_IEN_TIMEOUT	BIT(13)
+
+/* interrupt clear register */
+#define SPRD_ICLR		0x0014
+
+/* line control register */
+#define SPRD_LCR		0x0018
+#define SPRD_LCR_STOP_1BIT	0x10
+#define SPRD_LCR_STOP_2BIT	0x30
+#define SPRD_LCR_DATA_LEN	(BIT(2) | BIT(3))
+#define SPRD_LCR_DATA_LEN5	0x0
+#define SPRD_LCR_DATA_LEN6	0x4
+#define SPRD_LCR_DATA_LEN7	0x8
+#define SPRD_LCR_DATA_LEN8	0xc
+#define SPRD_LCR_PARITY	(BIT(0) | BIT(1))
+#define SPRD_LCR_PARITY_EN	0x2
+#define SPRD_LCR_EVEN_PAR	0x0
+#define SPRD_LCR_ODD_PAR	0x1
+
+/* control register 1 */
+#define SPRD_CTL1			0x001C
+#define RX_HW_FLOW_CTL_THLD	BIT(6)
+#define RX_HW_FLOW_CTL_EN	BIT(7)
+#define TX_HW_FLOW_CTL_EN	BIT(8)
+#define RX_TOUT_THLD_DEF	0x3E00
+#define RX_HFC_THLD_DEF	0x40
+
+/* fifo threshold register */
+#define SPRD_CTL2		0x0020
+#define THLD_TX_EMPTY	0x40
+#define THLD_RX_FULL	0x40
+
+/* config baud rate register */
+#define SPRD_CLKD0		0x0024
+#define SPRD_CLKD1		0x0028
+
+/* interrupt mask status register */
+#define SPRD_IMSR			0x002C
+#define SPRD_IMSR_RX_FIFO_FULL		BIT(0)
+#define SPRD_IMSR_TX_FIFO_EMPTY	BIT(1)
+#define SPRD_IMSR_BREAK_DETECT		BIT(7)
+#define SPRD_IMSR_TIMEOUT		BIT(13)
+
+struct reg_backup {
+	u32 ien;
+	u32 ctrl0;
+	u32 ctrl1;
+	u32 ctrl2;
+	u32 clkd0;
+	u32 clkd1;
+	u32 dspwait;
+};
+
+struct sprd_uart_port {
+	struct uart_port port;
+	struct reg_backup reg_bak;
+	char name[16];
+};
+
+static struct sprd_uart_port *sprd_port[UART_NR_MAX];
+static int sprd_ports_num;
+
+static inline unsigned int serial_in(struct uart_port *port, int offset)
+{
+	return readl_relaxed(port->membase + offset);
+}
+
+static inline void serial_out(struct uart_port *port, int offset, int value)
+{
+	writel_relaxed(value, port->membase + offset);
+}
+
+static unsigned int sprd_tx_empty(struct uart_port *port)
+{
+	if (serial_in(port, SPRD_STS1) & 0xff00)
+		return 0;
+	else
+		return TIOCSER_TEMT;
+}
+
+static unsigned int sprd_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_DSR | TIOCM_CTS;
+}
+
+static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* nothing to do */
+}
+
+static void sprd_stop_tx(struct uart_port *port)
+{
+	unsigned int ien, iclr;
+
+	iclr = serial_in(port, SPRD_ICLR);
+	ien = serial_in(port, SPRD_IEN);
+
+	iclr |= SPRD_IEN_TX_EMPTY;
+	ien &= ~SPRD_IEN_TX_EMPTY;
+
+	serial_out(port, SPRD_ICLR, iclr);
+	serial_out(port, SPRD_IEN, ien);
+}
+
+static void sprd_start_tx(struct uart_port *port)
+{
+	unsigned int ien;
+
+	ien = serial_in(port, SPRD_IEN);
+	if (!(ien & SPRD_IEN_TX_EMPTY)) {
+		ien |= SPRD_IEN_TX_EMPTY;
+		serial_out(port, SPRD_IEN, ien);
+	}
+}
+
+static void sprd_stop_rx(struct uart_port *port)
+{
+	unsigned int ien, iclr;
+
+	iclr = serial_in(port, SPRD_ICLR);
+	ien = serial_in(port, SPRD_IEN);
+
+	ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
+	iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
+
+	serial_out(port, SPRD_IEN, ien);
+	serial_out(port, SPRD_ICLR, iclr);
+}
+
+/* The Sprd serial does not support this function. */
+static void sprd_break_ctl(struct uart_port *port, int break_state)
+{
+	/* nothing to do */
+}
+
+static int handle_lsr_errors(struct uart_port *port,
+			     unsigned int *flag,
+			     unsigned int *lsr)
+{
+	int ret = 0;
+
+	/* statistics */
+	if (*lsr & SPRD_LSR_BI) {
+		*lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
+		port->icount.brk++;
+		ret = uart_handle_break(port);
+		if (ret)
+			return ret;
+	} else if (*lsr & SPRD_LSR_PE)
+		port->icount.parity++;
+	else if (*lsr & SPRD_LSR_FE)
+		port->icount.frame++;
+	if (*lsr & SPRD_LSR_OE)
+		port->icount.overrun++;
+
+	/* mask off conditions which should be ignored */
+	*lsr &= port->read_status_mask;
+	if (*lsr & SPRD_LSR_BI)
+		*flag = TTY_BREAK;
+	else if (*lsr & SPRD_LSR_PE)
+		*flag = TTY_PARITY;
+	else if (*lsr & SPRD_LSR_FE)
+		*flag = TTY_FRAME;
+
+	return ret;
+}
+
+static inline void sprd_rx(struct uart_port *port)
+{
+	struct tty_port *tty = &port->state->port;
+	unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
+
+	while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
+		lsr = serial_in(port, SPRD_LSR);
+		ch = serial_in(port, SPRD_RXD);
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
+			SPRD_LSR_FE | SPRD_LSR_OE))
+			if (handle_lsr_errors(port, &lsr, &flag))
+				continue;
+		if (uart_handle_sysrq_char(port, ch))
+			continue;
+
+		uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static inline void sprd_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	if (port->x_char) {
+		serial_out(port, SPRD_TXD, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		sprd_stop_tx(port);
+		return;
+	}
+
+	count = THLD_TX_EMPTY;
+	do {
+		serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		sprd_stop_tx(port);
+}
+
+/* this handles the interrupt from one port */
+static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned int ims;
+
+	spin_lock(&port->lock);
+
+	ims = serial_in(port, SPRD_IMSR);
+
+	if (!ims)
+		return IRQ_NONE;
+
+	serial_out(port, SPRD_ICLR, ~0);
+
+	if (ims & (SPRD_IMSR_RX_FIFO_FULL |
+		SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
+		sprd_rx(port);
+
+	if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
+		sprd_tx(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int sprd_startup(struct uart_port *port)
+{
+	int ret = 0;
+	unsigned int ien, fc;
+	unsigned int timeout;
+	struct sprd_uart_port *sp;
+	unsigned long flags;
+
+	serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
+
+	/* clear rx fifo */
+	timeout = SPRD_TIMEOUT;
+	while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)
+		serial_in(port, SPRD_RXD);
+
+	/* clear tx fifo */
+	timeout = SPRD_TIMEOUT;
+	while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)
+		cpu_relax();
+
+	/* clear interrupt */
+	serial_out(port, SPRD_IEN, 0);
+	serial_out(port, SPRD_ICLR, ~0);
+
+	/* allocate irq */
+	sp = container_of(port, struct sprd_uart_port, port);
+	snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
+	ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
+				IRQF_SHARED, sp->name, port);
+	if (ret) {
+		dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
+			port->irq, ret);
+		return ret;
+	}
+	fc = serial_in(port, SPRD_CTL1);
+	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+	serial_out(port, SPRD_CTL1, fc);
+
+	/* enable interrupt */
+	spin_lock_irqsave(&port->lock, flags);
+	ien = serial_in(port, SPRD_IEN);
+	ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
+	serial_out(port, SPRD_IEN, ien);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return 0;
+}
+
+static void sprd_shutdown(struct uart_port *port)
+{
+	serial_out(port, SPRD_IEN, 0);
+	serial_out(port, SPRD_ICLR, ~0);
+	devm_free_irq(port->dev, port->irq, port);
+}
+
+static void sprd_set_termios(struct uart_port *port,
+				    struct ktermios *termios,
+				    struct ktermios *old)
+{
+	unsigned int baud, quot;
+	unsigned int lcr = 0, fc;
+	unsigned long flags;
+
+	/* ask the core to calculate the divisor for us */
+	baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
+
+	quot = (unsigned int)((port->uartclk + baud / 2) / baud);
+
+	/* set data length */
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		lcr |= SPRD_LCR_DATA_LEN5;
+		break;
+	case CS6:
+		lcr |= SPRD_LCR_DATA_LEN6;
+		break;
+	case CS7:
+		lcr |= SPRD_LCR_DATA_LEN7;
+		break;
+	case CS8:
+	default:
+		lcr |= SPRD_LCR_DATA_LEN8;
+		break;
+	}
+
+	/* calculate stop bits */
+	lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
+	if (termios->c_cflag & CSTOPB)
+		lcr |= SPRD_LCR_STOP_2BIT;
+	else
+		lcr |= SPRD_LCR_STOP_1BIT;
+
+	/* calculate parity */
+	lcr &= ~SPRD_LCR_PARITY;
+	termios->c_cflag &= ~CMSPAR;	/* no support mark/space */
+	if (termios->c_cflag & PARENB) {
+		lcr |= SPRD_LCR_PARITY_EN;
+		if (termios->c_cflag & PARODD)
+			lcr |= SPRD_LCR_ODD_PAR;
+		else
+			lcr |= SPRD_LCR_EVEN_PAR;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* update the per-port timeout */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = SPRD_LSR_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		port->read_status_mask |= SPRD_LSR_BI;
+
+	/* characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		port->ignore_status_mask |= SPRD_LSR_BI;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			port->ignore_status_mask |= SPRD_LSR_OE;
+	}
+
+	/* flow control */
+	fc = serial_in(port, SPRD_CTL1);
+	fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
+	if (termios->c_cflag & CRTSCTS) {
+		fc |= RX_HW_FLOW_CTL_THLD;
+		fc |= RX_HW_FLOW_CTL_EN;
+		fc |= TX_HW_FLOW_CTL_EN;
+	}
+
+	/* clock divider bit0~bit15 */
+	serial_out(port, SPRD_CLKD0, quot & 0xffff);
+
+	/* clock divider bit16~bit20 */
+	serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
+	serial_out(port, SPRD_LCR, lcr);
+	fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
+	serial_out(port, SPRD_CTL1, fc);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *sprd_type(struct uart_port *port)
+{
+	return "SPX";
+}
+
+static void sprd_release_port(struct uart_port *port)
+{
+	/* nothing to do */
+}
+
+static int sprd_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void sprd_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE)
+		port->type = PORT_SPRD;
+}
+
+static int sprd_verify_port(struct uart_port *port,
+				   struct serial_struct *ser)
+{
+	if (ser->type != PORT_SPRD)
+		return -EINVAL;
+	if (port->irq != ser->irq)
+		return -EINVAL;
+	return 0;
+}
+
+static struct uart_ops serial_sprd_ops = {
+	.tx_empty = sprd_tx_empty,
+	.get_mctrl = sprd_get_mctrl,
+	.set_mctrl = sprd_set_mctrl,
+	.stop_tx = sprd_stop_tx,
+	.start_tx = sprd_start_tx,
+	.stop_rx = sprd_stop_rx,
+	.break_ctl = sprd_break_ctl,
+	.startup = sprd_startup,
+	.shutdown = sprd_shutdown,
+	.set_termios = sprd_set_termios,
+	.type = sprd_type,
+	.release_port = sprd_release_port,
+	.request_port = sprd_request_port,
+	.config_port = sprd_config_port,
+	.verify_port = sprd_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SPRD_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int status, tmout = 10000;
+
+	/* wait up to 10ms for the character(s) to be sent */
+	do {
+		status = serial_in(port, SPRD_STS1);
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (status & 0xff00);
+}
+
+static void sprd_console_putchar(struct uart_port *port, int ch)
+{
+	wait_for_xmitr(port);
+	serial_out(port, SPRD_TXD, ch);
+}
+
+static void sprd_console_write(struct console *co, const char *s,
+				      unsigned int count)
+{
+	struct uart_port *port = &sprd_port[co->index]->port;
+	int locked = 1;
+	unsigned long flags;
+
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock_irqsave(&port->lock, flags);
+	else
+		spin_lock_irqsave(&port->lock, flags);
+
+	uart_console_write(port, s, count, sprd_console_putchar);
+
+	/* wait for transmitter to become empty */
+	wait_for_xmitr(port);
+
+	if (locked)
+		spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int __init sprd_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index >= UART_NR_MAX || co->index < 0)
+		co->index = 0;
+
+	port = &sprd_port[co->index]->port;
+	if (port == NULL) {
+		pr_info("serial port %d not yet initialized\n", co->index);
+		return -ENODEV;
+	}
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver sprd_uart_driver;
+static struct console sprd_console = {
+	.name = SPRD_TTY_NAME,
+	.write = sprd_console_write,
+	.device = uart_console_device,
+	.setup = sprd_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &sprd_uart_driver,
+};
+
+#define SPRD_CONSOLE	(&sprd_console)
+
+/* Support for earlycon */
+static void sprd_putc(struct uart_port *port, int c)
+{
+	unsigned int timeout = SPRD_TIMEOUT;
+
+	while (timeout-- &&
+		   !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
+		cpu_relax();
+
+	writeb(c, port->membase + SPRD_TXD);
+}
+
+static void sprd_early_write(struct console *con, const char *s,
+				    unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, sprd_putc);
+}
+
+static int __init sprd_early_console_setup(
+				struct earlycon_device *device,
+				const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = sprd_early_write;
+	return 0;
+}
+
+EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
+OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
+		    sprd_early_console_setup);
+
+#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
+#define SPRD_CONSOLE		NULL
+#endif
+
+static struct uart_driver sprd_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "sprd_serial",
+	.dev_name = SPRD_TTY_NAME,
+	.major = 0,
+	.minor = 0,
+	.nr = UART_NR_MAX,
+	.cons = SPRD_CONSOLE,
+};
+
+static int sprd_probe_dt_alias(int index, struct device *dev)
+{
+	struct device_node *np;
+	static bool seen_dev_with_alias;
+	static bool seen_dev_without_alias;
+	int ret = index;
+
+	if (!IS_ENABLED(CONFIG_OF))
+		return ret;
+
+	np = dev->of_node;
+	if (!np)
+		return ret;
+
+	ret = of_alias_get_id(np, "serial");
+	if (IS_ERR_VALUE(ret)) {
+		seen_dev_without_alias = true;
+		ret = index;
+	} else {
+		seen_dev_with_alias = true;
+		if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
+			dev_warn(dev, "requested serial port %d  not available.\n", ret);
+			ret = index;
+		}
+	}
+
+	return ret;
+}
+
+static int sprd_remove(struct platform_device *dev)
+{
+	struct sprd_uart_port *sup = platform_get_drvdata(dev);
+
+	if (sup) {
+		uart_remove_one_port(&sprd_uart_driver, &sup->port);
+		sprd_port[sup->port.line] = NULL;
+		sprd_ports_num--;
+	}
+
+	if (!sprd_ports_num)
+		uart_unregister_driver(&sprd_uart_driver);
+
+	return 0;
+}
+
+static int sprd_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct uart_port *up;
+	struct clk *clk;
+	int irq;
+	int index;
+	int ret;
+
+	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
+		if (sprd_port[index] == NULL)
+			break;
+
+	if (index == ARRAY_SIZE(sprd_port))
+		return -EBUSY;
+
+	index = sprd_probe_dt_alias(index, &pdev->dev);
+
+	sprd_port[index] = devm_kzalloc(&pdev->dev,
+		sizeof(*sprd_port[index]), GFP_KERNEL);
+	if (!sprd_port[index])
+		return -ENOMEM;
+
+	pdev->id = index;
+
+	up = &sprd_port[index]->port;
+	up->dev = &pdev->dev;
+	up->line = index;
+	up->type = PORT_SPRD;
+	up->iotype = SERIAL_IO_PORT;
+	up->uartclk = SPRD_DEF_RATE;
+	up->fifosize = SPRD_FIFO_SIZE;
+	up->ops = &serial_sprd_ops;
+	up->flags = UPF_BOOT_AUTOCONF;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(clk))
+		up->uartclk = clk_get_rate(clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "not provide mem resource\n");
+		return -ENODEV;
+	}
+	up->mapbase = res->start;
+	up->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(up->membase))
+		return PTR_ERR(up->membase);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "not provide irq resource\n");
+		return -ENODEV;
+	}
+	up->irq = irq;
+
+	if (!sprd_ports_num) {
+		ret = uart_register_driver(&sprd_uart_driver);
+		if (ret < 0) {
+			pr_err("Failed to register SPRD-UART driver\n");
+			return ret;
+		}
+	}
+	sprd_ports_num++;
+
+	ret = uart_add_one_port(&sprd_uart_driver, up);
+	if (ret) {
+		sprd_port[index] = NULL;
+		sprd_remove(pdev);
+	}
+
+	platform_set_drvdata(pdev, up);
+
+	return ret;
+}
+
+static int sprd_suspend(struct device *dev)
+{
+	struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+	uart_suspend_port(&sprd_uart_driver, &sup->port);
+
+	return 0;
+}
+
+static int sprd_resume(struct device *dev)
+{
+	struct sprd_uart_port *sup = dev_get_drvdata(dev);
+
+	uart_resume_port(&sprd_uart_driver, &sup->port);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
+
+static const struct of_device_id serial_ids[] = {
+	{.compatible = "sprd,sc9836-uart",},
+	{}
+};
+
+static struct platform_driver sprd_platform_driver = {
+	.probe		= sprd_probe,
+	.remove		= sprd_remove,
+	.driver		= {
+		.name	= "sprd_serial",
+		.of_match_table = of_match_ptr(serial_ids),
+		.pm	= &sprd_pm_ops,
+	},
+};
+
+module_platform_driver(sprd_platform_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c172180..7e6eb39 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -248,4 +248,7 @@
 /* MESON */
 #define PORT_MESON	109
 
+/* SPRD SERIAL  */
+#define PORT_SPRD	110
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
1.7.9.5

Re: [PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Peter Hurley]

Hi Chunyan,

Minor but important fixes below.

And for the v9 version, please only use "To:" for
"Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>"

All other recipients should only be Cc:

Regards,
Peter Hurley


On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.

[...]

> +static int sprd_probe_dt_alias(int index, struct device *dev)
> +{
> +	struct device_node *np;
> +	static bool seen_dev_with_alias;
> +	static bool seen_dev_without_alias;
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

delete these two lines; these were used for the message deleted in a
previous patch version.

> +	int ret = index;
> +
> +	if (!IS_ENABLED(CONFIG_OF))
> +		return ret;
> +
> +	np = dev->of_node;
> +	if (!np)
> +		return ret;
> +
> +	ret = of_alias_get_id(np, "serial");
> +	if (IS_ERR_VALUE(ret)) {
> +		seen_dev_without_alias = true;
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> +		ret = index;
> +	} else {
> +		seen_dev_with_alias = true;
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> +		if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
> +			dev_warn(dev, "requested serial port %d  not available.\n", ret);
> +			ret = index;
> +		}
> +	}

Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:

	if (IS_ERR_VALUE(ret))
		ret = index;
	else if (ret >= ..................) {
		dev_warn(.....);
		ret = index;
	}


> +
> +	return ret;
> +}
> +
> +static int sprd_remove(struct platform_device *dev)
> +{
> +	struct sprd_uart_port *sup = platform_get_drvdata(dev);
> +
> +	if (sup) {
> +		uart_remove_one_port(&sprd_uart_driver, &sup->port);
> +		sprd_port[sup->port.line] = NULL;
> +		sprd_ports_num--;
> +	}
> +
> +	if (!sprd_ports_num)
> +		uart_unregister_driver(&sprd_uart_driver);
> +
> +	return 0;
> +}
> +
> +static int sprd_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	struct uart_port *up;
> +	struct clk *clk;
> +	int irq;
> +	int index;
> +	int ret;
> +
> +	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
> +		if (sprd_port[index] == NULL)
> +			break;
> +
> +	if (index == ARRAY_SIZE(sprd_port))
> +		return -EBUSY;
> +
> +	index = sprd_probe_dt_alias(index, &pdev->dev);
> +
> +	sprd_port[index] = devm_kzalloc(&pdev->dev,
> +		sizeof(*sprd_port[index]), GFP_KERNEL);
> +	if (!sprd_port[index])
> +		return -ENOMEM;
> +
> +	pdev->id = index;
        ^^^^^^^^^^^^^^^^
delete this line.

The platform device id cannot be assigned by the driver.
(This was left over from trying to fix sprd_suspend/sprd_resume
but that's fixed correctly now.)

> +
> +	up = &sprd_port[index]->port;
> +	up->dev = &pdev->dev;
> +	up->line = index;
> +	up->type = PORT_SPRD;
> +	up->iotype = SERIAL_IO_PORT;
> +	up->uartclk = SPRD_DEF_RATE;
> +	up->fifosize = SPRD_FIFO_SIZE;
> +	up->ops = &serial_sprd_ops;
> +	up->flags = UPF_BOOT_AUTOCONF;
> +
> +	clk = devm_clk_get(&pdev->dev, NULL);
> +	if (!IS_ERR(clk))
> +		up->uartclk = clk_get_rate(clk);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "not provide mem resource\n");
> +		return -ENODEV;
> +	}
> +	up->mapbase = res->start;
> +	up->membase = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(up->membase))
> +		return PTR_ERR(up->membase);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "not provide irq resource\n");
> +		return -ENODEV;
> +	}
> +	up->irq = irq;
> +
> +	if (!sprd_ports_num) {
> +		ret = uart_register_driver(&sprd_uart_driver);
> +		if (ret < 0) {
> +			pr_err("Failed to register SPRD-UART driver\n");
> +			return ret;
> +		}
> +	}
> +	sprd_ports_num++;
> +
> +	ret = uart_add_one_port(&sprd_uart_driver, up);
> +	if (ret) {
> +		sprd_port[index] = NULL;
> +		sprd_remove(pdev);
> +	}
> +
> +	platform_set_drvdata(pdev, up);
> +
> +	return ret;
> +}

Re: [PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Peter Hurley]

Hi Chunyan,

Minor but important fixes below.

And for the v9 version, please only use "To:" for
"Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

All other recipients should only be Cc:

Regards,
Peter Hurley


On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.

[...]

> +static int sprd_probe_dt_alias(int index, struct device *dev)
> +{
> +	struct device_node *np;
> +	static bool seen_dev_with_alias;
> +	static bool seen_dev_without_alias;
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

delete these two lines; these were used for the message deleted in a
previous patch version.

> +	int ret = index;
> +
> +	if (!IS_ENABLED(CONFIG_OF))
> +		return ret;
> +
> +	np = dev->of_node;
> +	if (!np)
> +		return ret;
> +
> +	ret = of_alias_get_id(np, "serial");
> +	if (IS_ERR_VALUE(ret)) {
> +		seen_dev_without_alias = true;
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> +		ret = index;
> +	} else {
> +		seen_dev_with_alias = true;
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> +		if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
> +			dev_warn(dev, "requested serial port %d  not available.\n", ret);
> +			ret = index;
> +		}
> +	}

Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:

	if (IS_ERR_VALUE(ret))
		ret = index;
	else if (ret >= ..................) {
		dev_warn(.....);
		ret = index;
	}


> +
> +	return ret;
> +}
> +
> +static int sprd_remove(struct platform_device *dev)
> +{
> +	struct sprd_uart_port *sup = platform_get_drvdata(dev);
> +
> +	if (sup) {
> +		uart_remove_one_port(&sprd_uart_driver, &sup->port);
> +		sprd_port[sup->port.line] = NULL;
> +		sprd_ports_num--;
> +	}
> +
> +	if (!sprd_ports_num)
> +		uart_unregister_driver(&sprd_uart_driver);
> +
> +	return 0;
> +}
> +
> +static int sprd_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	struct uart_port *up;
> +	struct clk *clk;
> +	int irq;
> +	int index;
> +	int ret;
> +
> +	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
> +		if (sprd_port[index] == NULL)
> +			break;
> +
> +	if (index == ARRAY_SIZE(sprd_port))
> +		return -EBUSY;
> +
> +	index = sprd_probe_dt_alias(index, &pdev->dev);
> +
> +	sprd_port[index] = devm_kzalloc(&pdev->dev,
> +		sizeof(*sprd_port[index]), GFP_KERNEL);
> +	if (!sprd_port[index])
> +		return -ENOMEM;
> +
> +	pdev->id = index;
        ^^^^^^^^^^^^^^^^
delete this line.

The platform device id cannot be assigned by the driver.
(This was left over from trying to fix sprd_suspend/sprd_resume
but that's fixed correctly now.)

> +
> +	up = &sprd_port[index]->port;
> +	up->dev = &pdev->dev;
> +	up->line = index;
> +	up->type = PORT_SPRD;
> +	up->iotype = SERIAL_IO_PORT;
> +	up->uartclk = SPRD_DEF_RATE;
> +	up->fifosize = SPRD_FIFO_SIZE;
> +	up->ops = &serial_sprd_ops;
> +	up->flags = UPF_BOOT_AUTOCONF;
> +
> +	clk = devm_clk_get(&pdev->dev, NULL);
> +	if (!IS_ERR(clk))
> +		up->uartclk = clk_get_rate(clk);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "not provide mem resource\n");
> +		return -ENODEV;
> +	}
> +	up->mapbase = res->start;
> +	up->membase = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(up->membase))
> +		return PTR_ERR(up->membase);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "not provide irq resource\n");
> +		return -ENODEV;
> +	}
> +	up->irq = irq;
> +
> +	if (!sprd_ports_num) {
> +		ret = uart_register_driver(&sprd_uart_driver);
> +		if (ret < 0) {
> +			pr_err("Failed to register SPRD-UART driver\n");
> +			return ret;
> +		}
> +	}
> +	sprd_ports_num++;
> +
> +	ret = uart_add_one_port(&sprd_uart_driver, up);
> +	if (ret) {
> +		sprd_port[index] = NULL;
> +		sprd_remove(pdev);
> +	}
> +
> +	platform_set_drvdata(pdev, up);
> +
> +	return ret;
> +}

[PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Peter Hurley]

Hi Chunyan,

Minor but important fixes below.

And for the v9 version, please only use "To:" for
"Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

All other recipients should only be Cc:

Regards,
Peter Hurley


On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.

[...]

> +static int sprd_probe_dt_alias(int index, struct device *dev)
> +{
> +	struct device_node *np;
> +	static bool seen_dev_with_alias;
> +	static bool seen_dev_without_alias;
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

delete these two lines; these were used for the message deleted in a
previous patch version.

> +	int ret = index;
> +
> +	if (!IS_ENABLED(CONFIG_OF))
> +		return ret;
> +
> +	np = dev->of_node;
> +	if (!np)
> +		return ret;
> +
> +	ret = of_alias_get_id(np, "serial");
> +	if (IS_ERR_VALUE(ret)) {
> +		seen_dev_without_alias = true;
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> +		ret = index;
> +	} else {
> +		seen_dev_with_alias = true;
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^
delete this line.

> +		if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
> +			dev_warn(dev, "requested serial port %d  not available.\n", ret);
> +			ret = index;
> +		}
> +	}

Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:

	if (IS_ERR_VALUE(ret))
		ret = index;
	else if (ret >= ..................) {
		dev_warn(.....);
		ret = index;
	}


> +
> +	return ret;
> +}
> +
> +static int sprd_remove(struct platform_device *dev)
> +{
> +	struct sprd_uart_port *sup = platform_get_drvdata(dev);
> +
> +	if (sup) {
> +		uart_remove_one_port(&sprd_uart_driver, &sup->port);
> +		sprd_port[sup->port.line] = NULL;
> +		sprd_ports_num--;
> +	}
> +
> +	if (!sprd_ports_num)
> +		uart_unregister_driver(&sprd_uart_driver);
> +
> +	return 0;
> +}
> +
> +static int sprd_probe(struct platform_device *pdev)
> +{
> +	struct resource *res;
> +	struct uart_port *up;
> +	struct clk *clk;
> +	int irq;
> +	int index;
> +	int ret;
> +
> +	for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
> +		if (sprd_port[index] == NULL)
> +			break;
> +
> +	if (index == ARRAY_SIZE(sprd_port))
> +		return -EBUSY;
> +
> +	index = sprd_probe_dt_alias(index, &pdev->dev);
> +
> +	sprd_port[index] = devm_kzalloc(&pdev->dev,
> +		sizeof(*sprd_port[index]), GFP_KERNEL);
> +	if (!sprd_port[index])
> +		return -ENOMEM;
> +
> +	pdev->id = index;
        ^^^^^^^^^^^^^^^^
delete this line.

The platform device id cannot be assigned by the driver.
(This was left over from trying to fix sprd_suspend/sprd_resume
but that's fixed correctly now.)

> +
> +	up = &sprd_port[index]->port;
> +	up->dev = &pdev->dev;
> +	up->line = index;
> +	up->type = PORT_SPRD;
> +	up->iotype = SERIAL_IO_PORT;
> +	up->uartclk = SPRD_DEF_RATE;
> +	up->fifosize = SPRD_FIFO_SIZE;
> +	up->ops = &serial_sprd_ops;
> +	up->flags = UPF_BOOT_AUTOCONF;
> +
> +	clk = devm_clk_get(&pdev->dev, NULL);
> +	if (!IS_ERR(clk))
> +		up->uartclk = clk_get_rate(clk);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "not provide mem resource\n");
> +		return -ENODEV;
> +	}
> +	up->mapbase = res->start;
> +	up->membase = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(up->membase))
> +		return PTR_ERR(up->membase);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "not provide irq resource\n");
> +		return -ENODEV;
> +	}
> +	up->irq = irq;
> +
> +	if (!sprd_ports_num) {
> +		ret = uart_register_driver(&sprd_uart_driver);
> +		if (ret < 0) {
> +			pr_err("Failed to register SPRD-UART driver\n");
> +			return ret;
> +		}
> +	}
> +	sprd_ports_num++;
> +
> +	ret = uart_add_one_port(&sprd_uart_driver, up);
> +	if (ret) {
> +		sprd_port[index] = NULL;
> +		sprd_remove(pdev);
> +	}
> +
> +	platform_set_drvdata(pdev, up);
> +
> +	return ret;
> +}

Re: [PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Lyra Zhang]

On Tue, Jan 27, 2015 at 10:47 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> Hi Chunyan,
>
> Minor but important fixes below.
>
> And for the v9 version, please only use "To:" for
> "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
>

Ok, thank you, I'll address your comments below and send the v9 to Greg.

Greg,
sorry, I'll send you a updated version tomorrow.

> All other recipients should only be Cc:
>
> Regards,
> Peter Hurley
>
>
> On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
>> Add a full sc9836-uart driver for SC9836 SoC which is based on the
>> spreadtrum sharkl64 platform.
>> This driver also support earlycon.
>
> [...]
>
>> +static int sprd_probe_dt_alias(int index, struct device *dev)
>> +{
>> +     struct device_node *np;
>> +     static bool seen_dev_with_alias;
>> +     static bool seen_dev_without_alias;
>         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> delete these two lines; these were used for the message deleted in a
> previous patch version.
>
>> +     int ret = index;
>> +
>> +     if (!IS_ENABLED(CONFIG_OF))
>> +             return ret;
>> +
>> +     np = dev->of_node;
>> +     if (!np)
>> +             return ret;
>> +
>> +     ret = of_alias_get_id(np, "serial");
>> +     if (IS_ERR_VALUE(ret)) {
>> +             seen_dev_without_alias = true;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> delete this line.
>
>> +             ret = index;
>> +     } else {
>> +             seen_dev_with_alias = true;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
> delete this line.
>
>> +             if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
>> +                     dev_warn(dev, "requested serial port %d  not available.\n", ret);
>> +                     ret = index;
>> +             }
>> +     }
>
> Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:
>
>         if (IS_ERR_VALUE(ret))
>                 ret = index;
>         else if (ret >= ..................) {
>                 dev_warn(.....);
>                 ret = index;
>         }
>
>
>> +
>> +     return ret;
>> +}
>> +
>> +static int sprd_remove(struct platform_device *dev)
>> +{
>> +     struct sprd_uart_port *sup = platform_get_drvdata(dev);
>> +
>> +     if (sup) {
>> +             uart_remove_one_port(&sprd_uart_driver, &sup->port);
>> +             sprd_port[sup->port.line] = NULL;
>> +             sprd_ports_num--;
>> +     }
>> +
>> +     if (!sprd_ports_num)
>> +             uart_unregister_driver(&sprd_uart_driver);
>> +
>> +     return 0;
>> +}
>> +
>> +static int sprd_probe(struct platform_device *pdev)
>> +{
>> +     struct resource *res;
>> +     struct uart_port *up;
>> +     struct clk *clk;
>> +     int irq;
>> +     int index;
>> +     int ret;
>> +
>> +     for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
>> +             if (sprd_port[index] == NULL)
>> +                     break;
>> +
>> +     if (index == ARRAY_SIZE(sprd_port))
>> +             return -EBUSY;
>> +
>> +     index = sprd_probe_dt_alias(index, &pdev->dev);
>> +
>> +     sprd_port[index] = devm_kzalloc(&pdev->dev,
>> +             sizeof(*sprd_port[index]), GFP_KERNEL);
>> +     if (!sprd_port[index])
>> +             return -ENOMEM;
>> +
>> +     pdev->id = index;
>         ^^^^^^^^^^^^^^^^
> delete this line.
>
> The platform device id cannot be assigned by the driver.
> (This was left over from trying to fix sprd_suspend/sprd_resume
> but that's fixed correctly now.)
>
>> +
>> +     up = &sprd_port[index]->port;
>> +     up->dev = &pdev->dev;
>> +     up->line = index;
>> +     up->type = PORT_SPRD;
>> +     up->iotype = SERIAL_IO_PORT;
>> +     up->uartclk = SPRD_DEF_RATE;
>> +     up->fifosize = SPRD_FIFO_SIZE;
>> +     up->ops = &serial_sprd_ops;
>> +     up->flags = UPF_BOOT_AUTOCONF;
>> +
>> +     clk = devm_clk_get(&pdev->dev, NULL);
>> +     if (!IS_ERR(clk))
>> +             up->uartclk = clk_get_rate(clk);
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!res) {
>> +             dev_err(&pdev->dev, "not provide mem resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->mapbase = res->start;
>> +     up->membase = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(up->membase))
>> +             return PTR_ERR(up->membase);
>> +
>> +     irq = platform_get_irq(pdev, 0);
>> +     if (irq < 0) {
>> +             dev_err(&pdev->dev, "not provide irq resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->irq = irq;
>> +
>> +     if (!sprd_ports_num) {
>> +             ret = uart_register_driver(&sprd_uart_driver);
>> +             if (ret < 0) {
>> +                     pr_err("Failed to register SPRD-UART driver\n");
>> +                     return ret;
>> +             }
>> +     }
>> +     sprd_ports_num++;
>> +
>> +     ret = uart_add_one_port(&sprd_uart_driver, up);
>> +     if (ret) {
>> +             sprd_port[index] = NULL;
>> +             sprd_remove(pdev);
>> +     }
>> +
>> +     platform_set_drvdata(pdev, up);
>> +
>> +     return ret;
>> +}
>

Re: [PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Lyra Zhang]

On Tue, Jan 27, 2015 at 10:47 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> Hi Chunyan,
>
> Minor but important fixes below.
>
> And for the v9 version, please only use "To:" for
> "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
>

Ok, thank you, I'll address your comments below and send the v9 to Greg.

Greg,
sorry, I'll send you a updated version tomorrow.

> All other recipients should only be Cc:
>
> Regards,
> Peter Hurley
>
>
> On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
>> Add a full sc9836-uart driver for SC9836 SoC which is based on the
>> spreadtrum sharkl64 platform.
>> This driver also support earlycon.
>
> [...]
>
>> +static int sprd_probe_dt_alias(int index, struct device *dev)
>> +{
>> +     struct device_node *np;
>> +     static bool seen_dev_with_alias;
>> +     static bool seen_dev_without_alias;
>         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> delete these two lines; these were used for the message deleted in a
> previous patch version.
>
>> +     int ret = index;
>> +
>> +     if (!IS_ENABLED(CONFIG_OF))
>> +             return ret;
>> +
>> +     np = dev->of_node;
>> +     if (!np)
>> +             return ret;
>> +
>> +     ret = of_alias_get_id(np, "serial");
>> +     if (IS_ERR_VALUE(ret)) {
>> +             seen_dev_without_alias = true;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> delete this line.
>
>> +             ret = index;
>> +     } else {
>> +             seen_dev_with_alias = true;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
> delete this line.
>
>> +             if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
>> +                     dev_warn(dev, "requested serial port %d  not available.\n", ret);
>> +                     ret = index;
>> +             }
>> +     }
>
> Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:
>
>         if (IS_ERR_VALUE(ret))
>                 ret = index;
>         else if (ret >= ..................) {
>                 dev_warn(.....);
>                 ret = index;
>         }
>
>
>> +
>> +     return ret;
>> +}
>> +
>> +static int sprd_remove(struct platform_device *dev)
>> +{
>> +     struct sprd_uart_port *sup = platform_get_drvdata(dev);
>> +
>> +     if (sup) {
>> +             uart_remove_one_port(&sprd_uart_driver, &sup->port);
>> +             sprd_port[sup->port.line] = NULL;
>> +             sprd_ports_num--;
>> +     }
>> +
>> +     if (!sprd_ports_num)
>> +             uart_unregister_driver(&sprd_uart_driver);
>> +
>> +     return 0;
>> +}
>> +
>> +static int sprd_probe(struct platform_device *pdev)
>> +{
>> +     struct resource *res;
>> +     struct uart_port *up;
>> +     struct clk *clk;
>> +     int irq;
>> +     int index;
>> +     int ret;
>> +
>> +     for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
>> +             if (sprd_port[index] == NULL)
>> +                     break;
>> +
>> +     if (index == ARRAY_SIZE(sprd_port))
>> +             return -EBUSY;
>> +
>> +     index = sprd_probe_dt_alias(index, &pdev->dev);
>> +
>> +     sprd_port[index] = devm_kzalloc(&pdev->dev,
>> +             sizeof(*sprd_port[index]), GFP_KERNEL);
>> +     if (!sprd_port[index])
>> +             return -ENOMEM;
>> +
>> +     pdev->id = index;
>         ^^^^^^^^^^^^^^^^
> delete this line.
>
> The platform device id cannot be assigned by the driver.
> (This was left over from trying to fix sprd_suspend/sprd_resume
> but that's fixed correctly now.)
>
>> +
>> +     up = &sprd_port[index]->port;
>> +     up->dev = &pdev->dev;
>> +     up->line = index;
>> +     up->type = PORT_SPRD;
>> +     up->iotype = SERIAL_IO_PORT;
>> +     up->uartclk = SPRD_DEF_RATE;
>> +     up->fifosize = SPRD_FIFO_SIZE;
>> +     up->ops = &serial_sprd_ops;
>> +     up->flags = UPF_BOOT_AUTOCONF;
>> +
>> +     clk = devm_clk_get(&pdev->dev, NULL);
>> +     if (!IS_ERR(clk))
>> +             up->uartclk = clk_get_rate(clk);
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!res) {
>> +             dev_err(&pdev->dev, "not provide mem resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->mapbase = res->start;
>> +     up->membase = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(up->membase))
>> +             return PTR_ERR(up->membase);
>> +
>> +     irq = platform_get_irq(pdev, 0);
>> +     if (irq < 0) {
>> +             dev_err(&pdev->dev, "not provide irq resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->irq = irq;
>> +
>> +     if (!sprd_ports_num) {
>> +             ret = uart_register_driver(&sprd_uart_driver);
>> +             if (ret < 0) {
>> +                     pr_err("Failed to register SPRD-UART driver\n");
>> +                     return ret;
>> +             }
>> +     }
>> +     sprd_ports_num++;
>> +
>> +     ret = uart_add_one_port(&sprd_uart_driver, up);
>> +     if (ret) {
>> +             sprd_port[index] = NULL;
>> +             sprd_remove(pdev);
>> +     }
>> +
>> +     platform_set_drvdata(pdev, up);
>> +
>> +     return ret;
>> +}
>

[PATCH v8 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Lyra Zhang]

On Tue, Jan 27, 2015 at 10:47 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> Hi Chunyan,
>
> Minor but important fixes below.
>
> And for the v9 version, please only use "To:" for
> "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
>

Ok, thank you, I'll address your comments below and send the v9 to Greg.

Greg,
sorry, I'll send you a updated version tomorrow.

> All other recipients should only be Cc:
>
> Regards,
> Peter Hurley
>
>
> On 01/27/2015 02:56 AM, Chunyan Zhang wrote:
>> Add a full sc9836-uart driver for SC9836 SoC which is based on the
>> spreadtrum sharkl64 platform.
>> This driver also support earlycon.
>
> [...]
>
>> +static int sprd_probe_dt_alias(int index, struct device *dev)
>> +{
>> +     struct device_node *np;
>> +     static bool seen_dev_with_alias;
>> +     static bool seen_dev_without_alias;
>         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> delete these two lines; these were used for the message deleted in a
> previous patch version.
>
>> +     int ret = index;
>> +
>> +     if (!IS_ENABLED(CONFIG_OF))
>> +             return ret;
>> +
>> +     np = dev->of_node;
>> +     if (!np)
>> +             return ret;
>> +
>> +     ret = of_alias_get_id(np, "serial");
>> +     if (IS_ERR_VALUE(ret)) {
>> +             seen_dev_without_alias = true;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> delete this line.
>
>> +             ret = index;
>> +     } else {
>> +             seen_dev_with_alias = true;
>                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
> delete this line.
>
>> +             if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
>> +                     dev_warn(dev, "requested serial port %d  not available.\n", ret);
>> +                     ret = index;
>> +             }
>> +     }
>
> Simplify the entire "if (IS_ERR_VALUE(ret))" statement to:
>
>         if (IS_ERR_VALUE(ret))
>                 ret = index;
>         else if (ret >= ..................) {
>                 dev_warn(.....);
>                 ret = index;
>         }
>
>
>> +
>> +     return ret;
>> +}
>> +
>> +static int sprd_remove(struct platform_device *dev)
>> +{
>> +     struct sprd_uart_port *sup = platform_get_drvdata(dev);
>> +
>> +     if (sup) {
>> +             uart_remove_one_port(&sprd_uart_driver, &sup->port);
>> +             sprd_port[sup->port.line] = NULL;
>> +             sprd_ports_num--;
>> +     }
>> +
>> +     if (!sprd_ports_num)
>> +             uart_unregister_driver(&sprd_uart_driver);
>> +
>> +     return 0;
>> +}
>> +
>> +static int sprd_probe(struct platform_device *pdev)
>> +{
>> +     struct resource *res;
>> +     struct uart_port *up;
>> +     struct clk *clk;
>> +     int irq;
>> +     int index;
>> +     int ret;
>> +
>> +     for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
>> +             if (sprd_port[index] == NULL)
>> +                     break;
>> +
>> +     if (index == ARRAY_SIZE(sprd_port))
>> +             return -EBUSY;
>> +
>> +     index = sprd_probe_dt_alias(index, &pdev->dev);
>> +
>> +     sprd_port[index] = devm_kzalloc(&pdev->dev,
>> +             sizeof(*sprd_port[index]), GFP_KERNEL);
>> +     if (!sprd_port[index])
>> +             return -ENOMEM;
>> +
>> +     pdev->id = index;
>         ^^^^^^^^^^^^^^^^
> delete this line.
>
> The platform device id cannot be assigned by the driver.
> (This was left over from trying to fix sprd_suspend/sprd_resume
> but that's fixed correctly now.)
>
>> +
>> +     up = &sprd_port[index]->port;
>> +     up->dev = &pdev->dev;
>> +     up->line = index;
>> +     up->type = PORT_SPRD;
>> +     up->iotype = SERIAL_IO_PORT;
>> +     up->uartclk = SPRD_DEF_RATE;
>> +     up->fifosize = SPRD_FIFO_SIZE;
>> +     up->ops = &serial_sprd_ops;
>> +     up->flags = UPF_BOOT_AUTOCONF;
>> +
>> +     clk = devm_clk_get(&pdev->dev, NULL);
>> +     if (!IS_ERR(clk))
>> +             up->uartclk = clk_get_rate(clk);
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!res) {
>> +             dev_err(&pdev->dev, "not provide mem resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->mapbase = res->start;
>> +     up->membase = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(up->membase))
>> +             return PTR_ERR(up->membase);
>> +
>> +     irq = platform_get_irq(pdev, 0);
>> +     if (irq < 0) {
>> +             dev_err(&pdev->dev, "not provide irq resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->irq = irq;
>> +
>> +     if (!sprd_ports_num) {
>> +             ret = uart_register_driver(&sprd_uart_driver);
>> +             if (ret < 0) {
>> +                     pr_err("Failed to register SPRD-UART driver\n");
>> +                     return ret;
>> +             }
>> +     }
>> +     sprd_ports_num++;
>> +
>> +     ret = uart_add_one_port(&sprd_uart_driver, up);
>> +     if (ret) {
>> +             sprd_port[index] = NULL;
>> +             sprd_remove(pdev);
>> +     }
>> +
>> +     platform_set_drvdata(pdev, up);
>> +
>> +     return ret;
>> +}
>

Re: [PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Arnd Bergmann]

On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
> This patch-set split the last version, and addressed the review comments from
> last version on serial driver code.
> 
> Changes from v7:
> * Addressed review comments from Peter:
>         - Initialized the stack local with zero in sprd_set_termios()
>         - Used dev_get_drvdata() to get sprd_uart_port
> 

Looks good to me, but you still have too many people on 'To', so Greg
might be missing that you expect him to merge it.

Greg, if there are no further comments, can you take both patches through
the tty git?

	Arnd

[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Arnd Bergmann]

On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
> This patch-set split the last version, and addressed the review comments from
> last version on serial driver code.
> 
> Changes from v7:
> * Addressed review comments from Peter:
>         - Initialized the stack local with zero in sprd_set_termios()
>         - Used dev_get_drvdata() to get sprd_uart_port
> 

Looks good to me, but you still have too many people on 'To', so Greg
might be missing that you expect him to merge it.

Greg, if there are no further comments, can you take both patches through
the tty git?

	Arnd

Re: [PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Greg KH]

On Tue, Jan 27, 2015 at 02:24:02PM +0100, Arnd Bergmann wrote:
> On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
> > This patch-set split the last version, and addressed the review comments from
> > last version on serial driver code.
> > 
> > Changes from v7:
> > * Addressed review comments from Peter:
> >         - Initialized the stack local with zero in sprd_set_termios()
> >         - Used dev_get_drvdata() to get sprd_uart_port
> > 
> 
> Looks good to me, but you still have too many people on 'To', so Greg
> might be missing that you expect him to merge it.
> 
> Greg, if there are no further comments, can you take both patches through
> the tty git?

Will do, thanks.

greg k-h

Re: [PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Greg KH]

On Tue, Jan 27, 2015 at 02:24:02PM +0100, Arnd Bergmann wrote:
> On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
> > This patch-set split the last version, and addressed the review comments from
> > last version on serial driver code.
> > 
> > Changes from v7:
> > * Addressed review comments from Peter:
> >         - Initialized the stack local with zero in sprd_set_termios()
> >         - Used dev_get_drvdata() to get sprd_uart_port
> > 
> 
> Looks good to me, but you still have too many people on 'To', so Greg
> might be missing that you expect him to merge it.
> 
> Greg, if there are no further comments, can you take both patches through
> the tty git?

Will do, thanks.

greg k-h

[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Greg KH]

On Tue, Jan 27, 2015 at 02:24:02PM +0100, Arnd Bergmann wrote:
> On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
> > This patch-set split the last version, and addressed the review comments from
> > last version on serial driver code.
> > 
> > Changes from v7:
> > * Addressed review comments from Peter:
> >         - Initialized the stack local with zero in sprd_set_termios()
> >         - Used dev_get_drvdata() to get sprd_uart_port
> > 
> 
> Looks good to me, but you still have too many people on 'To', so Greg
> might be missing that you expect him to merge it.
> 
> Greg, if there are no further comments, can you take both patches through
> the tty git?

Will do, thanks.

greg k-h

Re: [PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Lyra Zhang]

On Tue, Jan 27, 2015 at 10:55 PM, Greg KH <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org> wrote:
> On Tue, Jan 27, 2015 at 02:24:02PM +0100, Arnd Bergmann wrote:
>> On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
>> > This patch-set split the last version, and addressed the review comments from
>> > last version on serial driver code.
>> >
>> > Changes from v7:
>> > * Addressed review comments from Peter:
>> >         - Initialized the stack local with zero in sprd_set_termios()
>> >         - Used dev_get_drvdata() to get sprd_uart_port
>> >
>>
>> Looks good to me, but you still have too many people on 'To', so Greg
>> might be missing that you expect him to merge it.
>>
>> Greg, if there are no further comments, can you take both patches through
>> the tty git?
>
> Will do, thanks.
>
> greg k-h

To Arnd, Greg, Peter, and to all of others

thank you so much for your help.
You all gave us so many important comments and valuable suggestions
these months.

Best regards,
Chunyan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Lyra Zhang]

On Tue, Jan 27, 2015 at 10:55 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Tue, Jan 27, 2015 at 02:24:02PM +0100, Arnd Bergmann wrote:
>> On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
>> > This patch-set split the last version, and addressed the review comments from
>> > last version on serial driver code.
>> >
>> > Changes from v7:
>> > * Addressed review comments from Peter:
>> >         - Initialized the stack local with zero in sprd_set_termios()
>> >         - Used dev_get_drvdata() to get sprd_uart_port
>> >
>>
>> Looks good to me, but you still have too many people on 'To', so Greg
>> might be missing that you expect him to merge it.
>>
>> Greg, if there are no further comments, can you take both patches through
>> the tty git?
>
> Will do, thanks.
>
> greg k-h

To Arnd, Greg, Peter, and to all of others

thank you so much for your help.
You all gave us so many important comments and valuable suggestions
these months.

Best regards,
Chunyan

[PATCH v8 0/2] Add Spreadtrum SoC bindings and serial driver support

[Lyra Zhang]

On Tue, Jan 27, 2015 at 10:55 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Tue, Jan 27, 2015 at 02:24:02PM +0100, Arnd Bergmann wrote:
>> On Tuesday 27 January 2015 15:56:45 Chunyan Zhang wrote:
>> > This patch-set split the last version, and addressed the review comments from
>> > last version on serial driver code.
>> >
>> > Changes from v7:
>> > * Addressed review comments from Peter:
>> >         - Initialized the stack local with zero in sprd_set_termios()
>> >         - Used dev_get_drvdata() to get sprd_uart_port
>> >
>>
>> Looks good to me, but you still have too many people on 'To', so Greg
>> might be missing that you expect him to merge it.
>>
>> Greg, if there are no further comments, can you take both patches through
>> the tty git?
>
> Will do, thanks.
>
> greg k-h

To Arnd, Greg, Peter, and to all of others

thank you so much for your help.
You all gave us so many important comments and valuable suggestions
these months.

Best regards,
Chunyan