* [meta-fsl-arm] Can't build U-Boot for LS1 boards
@ 2015-01-28 13:55 Gary Thomas
2015-01-28 14:27 ` zhenhua.luo
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2015-01-28 13:55 UTC (permalink / raw)
To: meta-freescale@yoctoproject.org
Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
When I tried
MACHINE=ls1021atwr bitbake u-boot-ls1
I get this error:
ERROR: Nothing PROVIDES 'u-boot-ls1'
ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
I had to add this line to my local.conf to get it to build:
UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
What is the "correct" way to build U-Boot for this board?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [meta-fsl-arm] Can't build U-Boot for LS1 boards
2015-01-28 13:55 [meta-fsl-arm] Can't build U-Boot for LS1 boards Gary Thomas
@ 2015-01-28 14:27 ` zhenhua.luo
2015-01-28 14:41 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: zhenhua.luo @ 2015-01-28 14:27 UTC (permalink / raw)
To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org
Hi ,
UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and UBOOT_CONFIG can't be set at the same time.
Try to add the following line in local.conf to override the default value and build again.
UBOOT_CONFIG = "sdcard"
Best Regards,
Zhenhua
> -----Original Message-----
> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> bounces@yoctoproject.org] On Behalf Of Gary Thomas
> Sent: Wednesday, January 28, 2015 9:55 PM
> To: meta-freescale@yoctoproject.org
> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
>
> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
>
> When I tried
> MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
> ERROR: Nothing PROVIDES 'u-boot-ls1'
> ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
>
> I had to add this line to my local.conf to get it to build:
> UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
>
> What is the "correct" way to build U-Boot for this board?
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [meta-fsl-arm] Can't build U-Boot for LS1 boards
2015-01-28 14:27 ` zhenhua.luo
@ 2015-01-28 14:41 ` Gary Thomas
2015-01-28 15:02 ` zhenhua.luo
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2015-01-28 14:41 UTC (permalink / raw)
To: zhenhua.luo@freescale.com; +Cc: meta-freescale@yoctoproject.org
On 2015-01-28 07:27, zhenhua.luo@freescale.com wrote:
> Hi ,
>
> UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and UBOOT_CONFIG can't be set at the same time.
>
> Try to add the following line in local.conf to override the default value and build again.
>
> UBOOT_CONFIG = "sdcard"
I still get the same error.
>> -----Original Message-----
>> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
>> bounces@yoctoproject.org] On Behalf Of Gary Thomas
>> Sent: Wednesday, January 28, 2015 9:55 PM
>> To: meta-freescale@yoctoproject.org
>> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
>>
>> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
>>
>> When I tried
>> MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
>> ERROR: Nothing PROVIDES 'u-boot-ls1'
>> ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
>>
>> I had to add this line to my local.conf to get it to build:
>> UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
>>
>> What is the "correct" way to build U-Boot for this board?
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [meta-fsl-arm] Can't build U-Boot for LS1 boards
2015-01-28 14:41 ` Gary Thomas
@ 2015-01-28 15:02 ` zhenhua.luo
2015-01-28 16:01 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: zhenhua.luo @ 2015-01-28 15:02 UTC (permalink / raw)
To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org
Can you share your reproducible steps?
The following is my step and ongoing build log:
$ git clone git://git.yoctoproject.org/poky
$ cd poky
$ git clone git://git.yoctoproject.org/meta-fsl-arm
$ . ./oe-init-build-env ls1021atwr
Add 'UBOOT_CONFIG = "sdcard"' in conf/local.conf
Edit conf/bblayers.conf to append absolute path if meta-fsl-arm layer in BBLAYERS
$ MACHINE=ls1021atwr bitbake u-boot-ls1
Parsing recipes: 100% |#####################################################################################################| Time: 00:00:19
Parsing of 949 .bb files complete (0 cached, 949 parsed). 1355 targets, 99 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.25.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "ls1021atwr"
DISTRO = "poky"
DISTRO_VERSION = "1.7"
TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa7"
TARGET_FPU = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp = "master:07f2eca7e9f9163ec48d3a417d8ba885a84762f3"
meta-fsl-arm = "master:2d9b23e7ca473eaf33b8a96839686a331339e43a"
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: Failed to fetch URL ftp://ftp.gmplib.org/pub/gmp-6.0.0/gmp-6.0.0a.tar.bz2, attempting MIRRORS if available
Currently 4 running tasks (318 of 379):
0: glibc-2.20-r0 do_compile (pid 14097)
1: u-boot-ls1-tools-native-2013.10-r0 do_fetch (pid 21974)
2: binutils-native-2.24-r0 do_compile (pid 8695)
3: rpm-native-5.4.14-r0 do_configure (pid 21731)
...
Best Regards,
Zhenhua
> -----Original Message-----
> From: Gary Thomas [mailto:gary@mlbassoc.com]
> Sent: Wednesday, January 28, 2015 10:41 PM
> To: Luo Zhenhua-B19537
> Cc: meta-freescale@yoctoproject.org
> Subject: Re: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
>
> On 2015-01-28 07:27, zhenhua.luo@freescale.com wrote:
> > Hi ,
> >
> > UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and
> UBOOT_CONFIG can't be set at the same time.
> >
> > Try to add the following line in local.conf to override the default value and
> build again.
> >
> > UBOOT_CONFIG = "sdcard"
>
> I still get the same error.
>
> >> -----Original Message-----
> >> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
> >> bounces@yoctoproject.org] On Behalf Of Gary Thomas
> >> Sent: Wednesday, January 28, 2015 9:55 PM
> >> To: meta-freescale@yoctoproject.org
> >> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1
> >> boards
> >>
> >> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
> >>
> >> When I tried
> >> MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
> >> ERROR: Nothing PROVIDES 'u-boot-ls1'
> >> ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
> >>
> >> I had to add this line to my local.conf to get it to build:
> >> UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
> >>
> >> What is the "correct" way to build U-Boot for this board?
> >>
> >> --
> >> ------------------------------------------------------------
> >> Gary Thomas | Consulting for the
> >> MLB Associates | Embedded world
> >> ------------------------------------------------------------
> >> --
> >> _______________________________________________
> >> meta-freescale mailing list
> >> meta-freescale@yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/meta-freescale
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [meta-fsl-arm] Can't build U-Boot for LS1 boards
2015-01-28 15:02 ` zhenhua.luo
@ 2015-01-28 16:01 ` Gary Thomas
0 siblings, 0 replies; 5+ messages in thread
From: Gary Thomas @ 2015-01-28 16:01 UTC (permalink / raw)
To: meta-freescale
On 2015-01-28 08:02, zhenhua.luo@freescale.com wrote:
> Can you share your reproducible steps?
>
> The following is my step and ongoing build log:
> $ git clone git://git.yoctoproject.org/poky
> $ cd poky
> $ git clone git://git.yoctoproject.org/meta-fsl-arm
> $ . ./oe-init-build-env ls1021atwr
> Add 'UBOOT_CONFIG = "sdcard"' in conf/local.conf
> Edit conf/bblayers.conf to append absolute path if meta-fsl-arm layer in BBLAYERS
> $ MACHINE=ls1021atwr bitbake u-boot-ls1
> Parsing recipes: 100% |#####################################################################################################| Time: 00:00:19
> Parsing of 949 .bb files complete (0 cached, 949 parsed). 1355 targets, 99 skipped, 0 masked, 0 errors.
> NOTE: Resolving any missing task queue dependencies
>
> Build Configuration:
> BB_VERSION = "1.25.0"
> BUILD_SYS = "x86_64-linux"
> NATIVELSBSTRING = "Ubuntu-14.04"
> TARGET_SYS = "arm-poky-linux-gnueabi"
> MACHINE = "ls1021atwr"
> DISTRO = "poky"
> DISTRO_VERSION = "1.7"
> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa7"
> TARGET_FPU = "vfp-neon"
> meta
> meta-yocto
> meta-yocto-bsp = "master:07f2eca7e9f9163ec48d3a417d8ba885a84762f3"
> meta-fsl-arm = "master:2d9b23e7ca473eaf33b8a96839686a331339e43a"
>
> NOTE: Preparing RunQueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> WARNING: Failed to fetch URL ftp://ftp.gmplib.org/pub/gmp-6.0.0/gmp-6.0.0a.tar.bz2, attempting MIRRORS if available
> Currently 4 running tasks (318 of 379):
> 0: glibc-2.20-r0 do_compile (pid 14097)
> 1: u-boot-ls1-tools-native-2013.10-r0 do_fetch (pid 21974)
> 2: binutils-native-2.24-r0 do_compile (pid 8695)
> 3: rpm-native-5.4.14-r0 do_configure (pid 21731)
>
Duplicating your steps pointed out my problem - I was building with some
additional layers, one of which had a stale/old version of u-boot.inc.
I've sorted this now and can build as you suggested.
Thanks
>> -----Original Message-----
>> From: Gary Thomas [mailto:gary@mlbassoc.com]
>> Sent: Wednesday, January 28, 2015 10:41 PM
>> To: Luo Zhenhua-B19537
>> Cc: meta-freescale@yoctoproject.org
>> Subject: Re: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1 boards
>>
>> On 2015-01-28 07:27, zhenhua.luo@freescale.com wrote:
>>> Hi ,
>>>
>>> UBOOT_CONFIG is set in machine conf, UBOOT_MACHINE and
>> UBOOT_CONFIG can't be set at the same time.
>>>
>>> Try to add the following line in local.conf to override the default value and
>> build again.
>>>
>>> UBOOT_CONFIG = "sdcard"
>>
>> I still get the same error.
>>
>>>> -----Original Message-----
>>>> From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-
>>>> bounces@yoctoproject.org] On Behalf Of Gary Thomas
>>>> Sent: Wednesday, January 28, 2015 9:55 PM
>>>> To: meta-freescale@yoctoproject.org
>>>> Subject: [meta-freescale] [meta-fsl-arm] Can't build U-Boot for LS1
>>>> boards
>>>>
>>>> Using meta-fsl-arm master (4d8024331715ff871e730342de16bce4cd985b88)
>>>>
>>>> When I tried
>>>> MACHINE=ls1021atwr bitbake u-boot-ls1 I get this error:
>>>> ERROR: Nothing PROVIDES 'u-boot-ls1'
>>>> ERROR: u-boot-ls1 was skipped: because UBOOT_MACHINE is not set
>>>>
>>>> I had to add this line to my local.conf to get it to build:
>>>> UBOOT_MACHINE_ls1021atwr = "ls1021atwr_sdcard_config"
>>>>
>>>> What is the "correct" way to build U-Boot for this board?
>>>>
>>>> --
>>>> ------------------------------------------------------------
>>>> Gary Thomas | Consulting for the
>>>> MLB Associates | Embedded world
>>>> ------------------------------------------------------------
>>>> --
>>>> _______________________________________________
>>>> meta-freescale mailing list
>>>> meta-freescale@yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/meta-freescale
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-01-28 16:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-28 13:55 [meta-fsl-arm] Can't build U-Boot for LS1 boards Gary Thomas
2015-01-28 14:27 ` zhenhua.luo
2015-01-28 14:41 ` Gary Thomas
2015-01-28 15:02 ` zhenhua.luo
2015-01-28 16:01 ` Gary Thomas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.