[PATCH v5 05/13] pm: at91: move the copying the sram function to the sram initializationi phase

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

Hello.

On 1/29/2015 9:38 AM, Wenyou Yang wrote:

> To decrease the suspend time, move the copying the sram function
> to the sram initialization phase, instead of every time go to suspend.

> In the meanwhile, if there is no sram allocated for PM, the PM is not supported.

> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>   arch/arm/mach-at91/pm.c |   12 +++++++-----
>   1 file changed, 7 insertions(+), 5 deletions(-)

> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index daa998d..6df0152 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -163,10 +163,6 @@ static int at91_pm_enter(suspend_state_t state)
>   			 * turning off the main oscillator; reverse on wakeup.
>   			 */
>   			if (slow_clock) {
> -#ifdef CONFIG_AT91_SLOW_CLOCK
> -				/* copy slow_clock handler to SRAM, and call it */
> -				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> -#endif
>   				slow_clock(at91_pmc_base, at91_ramc_base[0],
>   					   at91_ramc_base[1],
>   					   at91_pm_data.memctrl);
> @@ -311,6 +307,9 @@ static void __init at91_pm_sram_init(void)
>   	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
>   	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
>
> +	/* Copy the slow_clock handler to SRAM */
> +	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);

    AFAIU (looking at the code above and below), __arm_ioremap_exec() can 
return NULL and in this case memcpy() will cause kernel oops.

> @@ -328,7 +327,10 @@ static void __init at91_pm_init(void)
>   	if (at91_cpuidle_device.dev.platform_data)
>   		platform_device_register(&at91_cpuidle_device);
>
> -	suspend_set_ops(&at91_pm_ops);
> +	if (slow_clock)
> +		suspend_set_ops(&at91_pm_ops);
> +	else
> +		pr_info("AT91: PM : Not supported, due to no sram allocated\n");

    I'd suggest upper-casing "sram". And removing of colon after "PM".

[...]

WBR, Sergei