All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bart.vanassche@sandisk.com>
To: Roland Dreier <roland@purestorage.com>
Cc: Max Gurtuvoy <maxg@mellanox.com>,
	Sagi Grimberg <sagig@mellanox.com>,
	linux-rdma <linux-rdma@vger.kernel.org>,
	"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: [PATCH] IB/srp: Process REQ_PREEMPT requests correctly
Date: Thu, 29 Jan 2015 14:02:00 +0100	[thread overview]
Message-ID: <54CA2F48.605@sandisk.com> (raw)

Delay REQ_PREEMPT requests submitted against a blocked device
until the device is unblocked by returning SCSI_MLQUEUE_HOST_BUSY
to the SCSI mid-layer. This avoids that a rescan shortly after a
cable pull sporadically triggers the following kernel oops:

BUG: unable to handle kernel paging request at ffffc9001a6bc084
IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100)
Call Trace:
 [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp]
 [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
 [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
 [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod]
 [<ffffffff81223b37>] __blk_run_queue+0x27/0x30
 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110
 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0
 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod]
 [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod]
 [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod]
 [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
 [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
 [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
 [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod]
 [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod]
 [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160
 [<ffffffff811589de>] vfs_write+0xce/0x140
 [<ffffffff81158b53>] sys_write+0x53/0xa0
 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b
 [<00007f611c9d9300>] 0x7f611c9d92ff

Reported-by: Max Gurtuvoy <maxg@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: <stable@vger.kernel.org>
---
 drivers/infiniband/ulp/srp/ib_srp.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 0747c05..77a7a2f 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2003,8 +2003,13 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd)
 	if (in_scsi_eh)
 		mutex_lock(&rport->mutex);
 
+	/*
+	 * The "blocked" state of SCSI devices is ignored by the SCSI core for
+	 * REQ_PREEMPT requests. Hence the explicit check below for the SCSI
+	 * device state.
+	 */
 	scmnd->result = srp_chkready(target->rport);
-	if (unlikely(scmnd->result))
+	if (unlikely(scmnd->result != 0 || scsi_device_blocked(scmnd->device)))
 		goto err;
 
 	WARN_ON_ONCE(scmnd->request->tag < 0);
-- 
2.1.4


             reply	other threads:[~2015-01-29 13:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-29 13:02 Bart Van Assche [this message]
     [not found] ` <54CA2F48.605-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-01-29 13:44   ` [PATCH] IB/srp: Process REQ_PREEMPT requests correctly Sagi Grimberg
2015-01-29 19:38 ` Mike Christie
2015-01-30  2:06   ` Mike Christie
2015-01-30 14:34     ` Bart Van Assche
     [not found]       ` <54CB9670.6080108-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2015-01-30 20:18         ` Mike Christie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54CA2F48.605@sandisk.com \
    --to=bart.vanassche@sandisk.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=maxg@mellanox.com \
    --cc=roland@purestorage.com \
    --cc=sagig@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.