[PATCH manpages 0/2] Improve modify_ldt, [gs]et_thread_area docs

[PATCH manpages 0/2] Improve modify_ldt, [gs]et_thread_area docs

[Andy Lutomirski]

The docs for set_thread_area, get_thread_area, and modify_ldt are pretty
bad, and there have been a number of kernel changes lately.  Improve
and update the docs.

Andy Lutomirski (2):
  modify_ldt.2: Overhaul the documentation
  arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS
    documentation

 man2/arch_prctl.2      |  22 +++++++----
 man2/get_thread_area.2 |  58 +---------------------------
 man2/modify_ldt.2      | 101 ++++++++++++++++++++++++++++++++++++++-----------
 man2/set_thread_area.2 |  93 ++++++++++++++++++++++++++++++++++++++++++---
 4 files changed, 180 insertions(+), 94 deletions(-)

-- 
2.1.0

[PATCH manpages 1/2] modify_ldt.2: Overhaul the documentation

[Andy Lutomirski]

This clarifies the behavior and documents all four functions.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 man2/modify_ldt.2 | 101 +++++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 78 insertions(+), 23 deletions(-)

diff --git a/man2/modify_ldt.2 b/man2/modify_ldt.2
index d128664716c6..f3cc94d397b3 100644
--- a/man2/modify_ldt.2
+++ b/man2/modify_ldt.2
@@ -1,4 +1,5 @@
 .\" Copyright (c) 1995 Michael Chastain (mec@duracef.shout.net), 22 July 1995.
+.\" Copyright (c) 2015 Andrew Lutomirski
 .\"
 .\" %%%LICENSE_START(GPLv2+_DOC_FULL)
 .\" This is free documentation; you can redistribute it and/or
@@ -23,37 +24,43 @@
 .\"
 .TH MODIFY_LDT 2 2012-07-13 "Linux" "Linux Programmer's Manual"
 .SH NAME
-modify_ldt \- get or set ldt
+modify_ldt \- get or set a per-process LDT entry
 .SH SYNOPSIS
 .nf
 .B #include <sys/types.h>
 .sp
 .BI "int modify_ldt(int " "func" ", void *" "ptr" ", unsigned long " "bytecount" );
 .fi
-
+.PP
 .IR Note :
 There is no glibc wrapper for this system call; see NOTES.
 .SH DESCRIPTION
 .BR modify_ldt ()
-reads or writes the local descriptor table (ldt) for a process.
-The ldt is a per-process memory management table used by the i386 processor.
-For more information on this table, see an Intel 386 processor handbook.
+reads or writes the local descriptor table (LDT) for a process.  The LDT
+is an array of segment descriptors that can be referenced by user code.
+Linux allows processes to configure a per-process (actually per-mm) LDT.
+For more information about the LDT, see the Intel Software Developer's
+Manual or the AMD Architecture Programming Manual.
 .PP
 When
 .I func
 is 0,
 .BR modify_ldt ()
-reads the ldt into the memory pointed to by
+reads the LDT into the memory pointed to by
 .IR ptr .
 The number of bytes read is the smaller of
 .I bytecount
-and the actual size of the ldt.
+and the actual size of the LDT, although the kernel may act as though
+the LDT is padded with additional trailing zero bytes.  On success,
+.BR modify_ldt ()
+will return the number of bytes read.
 .PP
 When
 .I func
-is 1,
+is 1 or 0x11,
 .BR modify_ldt ()
-modifies one ldt entry.
+modifies the LDT entry indicated by
+.I ptr\->entry_number.
 .I ptr
 points to a
 .I user_desc
@@ -61,11 +68,6 @@ structure
 and
 .I bytecount
 must equal the size of this structure.
-.\"
-.\" FIXME Should this page say something about func == 2 and func == 0x11?
-.\" In Linux 2.4, func == 2 returned "the default ldt"
-.\" In Linux 2.6, func == 2 is a nop, returning a zeroed out structure.
-.\" Linux 2.4 and 2.6 implement an operation for func == 0x11
 
 The
 .I user_desc
@@ -89,12 +91,44 @@ struct user_desc {
 .PP
 In Linux 2.4 and earlier, this structure was named
 .IR modify_ldt_ldt_s .
-.\" .PP
-.\" The ldt is specific for the calling process. Any attempts to change
-.\" the ldt to include the address space of another process or the kernel
-.\" will result in a segmentation violation when trying to access the memory
-.\" outside of the process address space. The memory protection is enforced
-.\" at the paging layer.
+.PP
+The
+.I contents
+field is the segment type (data, expand-down data, non-conforming code, or
+conforming code).  The other fields match their descriptions in the
+CPU manual, although
+.BR modify_ldt ()
+cannot set the accessed bit.
+.PP
+A
+.I user_desc
+is considered "empty" if
+.I read_exec_only
+and
+.I seg_not_present
+are set to 1 and all of the other fields are 0.
+An LDT entry can be cleared by setting it to an "empty"
+.I user_desc
+or, if
+.I func
+is 1, by setting both
+.I base
+and
+.I limit
+to 0.
+.PP
+A conforming code segment will be rejected if
+.I
+func
+is 1 or if
+.I seg_not_present
+is 0.
+.PP
+When
+.I func
+is 2,
+.BR modify_ldt ()
+will read zeros.  This appears to be a leftover from Linux 2.4.
 .SH RETURN VALUE
 On success,
 .BR modify_ldt ()
@@ -119,19 +153,40 @@ or
 is 1 and
 .I bytecount
 is not equal to the size of the structure
-.IR modify_ldt_ldt_s ,
+.IR user_desc ,
 or
 .I func
-is 1 and the new ldt entry has invalid values.
+is 1 or 0x11 and the new ldt entry has invalid values.
 .TP
 .B ENOSYS
 .I func
-is neither 0 nor 1.
+is neither 0, 1, 2, nor 0x11.
 .SH CONFORMING TO
 This call is Linux-specific and should not be used in programs intended
 to be portable.
+.SH BUGS
+On 64-bit kernels before Linux 3.19, one of the padding bits in
+.I user_desc,
+if set, would prevent the descriptor from being considered empty.
 .SH NOTES
 Glibc does not provide a wrapper for this system call; call it using
 .BR syscall (2).
+.PP
+.BR modify_ldt ()
+should not be used for thread-local storage, as it slows down context
+switches and only supports a limited number of threads.  Threading libraries
+should use
+.BR set_thread_area (2)
+or
+.BR arch_prctl (2)
+instead, except on extremely old kernels that do not support those system
+calls.
+.PP
+The normal use for
+.BR modify_ldt (2)
+is to run legacy 16-bit or segmented 32-bit code.  Not all kernels allow
+16-bit segments to be installed, however.
 .SH SEE ALSO
+.BR set_thread_area (2),
+.BR arch_prctl (2),
 .BR vm86 (2)
-- 
2.1.0

Re: [PATCH manpages 1/2] modify_ldt.2: Overhaul the documentation

[Michael Kerrisk (man-pages)]

Hi Andy,

On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
> This clarifies the behavior and documents all four functions.

Thanks! I've merged this in a branch, pending one or two questions below.

> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
> ---
>  man2/modify_ldt.2 | 101 +++++++++++++++++++++++++++++++++++++++++-------------
>  1 file changed, 78 insertions(+), 23 deletions(-)
> 
> diff --git a/man2/modify_ldt.2 b/man2/modify_ldt.2
> index d128664716c6..f3cc94d397b3 100644
> --- a/man2/modify_ldt.2
> +++ b/man2/modify_ldt.2
> @@ -1,4 +1,5 @@
>  .\" Copyright (c) 1995 Michael Chastain (mec@duracef.shout.net), 22 July 1995.
> +.\" Copyright (c) 2015 Andrew Lutomirski
>  .\"
>  .\" %%%LICENSE_START(GPLv2+_DOC_FULL)
>  .\" This is free documentation; you can redistribute it and/or
> @@ -23,37 +24,43 @@
>  .\"
>  .TH MODIFY_LDT 2 2012-07-13 "Linux" "Linux Programmer's Manual"
>  .SH NAME
> -modify_ldt \- get or set ldt
> +modify_ldt \- get or set a per-process LDT entry
>  .SH SYNOPSIS
>  .nf
>  .B #include <sys/types.h>
>  .sp
>  .BI "int modify_ldt(int " "func" ", void *" "ptr" ", unsigned long " "bytecount" );
>  .fi
> -
> +.PP
>  .IR Note :
>  There is no glibc wrapper for this system call; see NOTES.
>  .SH DESCRIPTION
>  .BR modify_ldt ()
> -reads or writes the local descriptor table (ldt) for a process.
> -The ldt is a per-process memory management table used by the i386 processor.
> -For more information on this table, see an Intel 386 processor handbook.
> +reads or writes the local descriptor table (LDT) for a process.  The LDT
> +is an array of segment descriptors that can be referenced by user code.
> +Linux allows processes to configure a per-process (actually per-mm) LDT.
> +For more information about the LDT, see the Intel Software Developer's
> +Manual or the AMD Architecture Programming Manual.
>  .PP
>  When
>  .I func
>  is 0,
>  .BR modify_ldt ()
> -reads the ldt into the memory pointed to by
> +reads the LDT into the memory pointed to by
>  .IR ptr .
>  The number of bytes read is the smaller of
>  .I bytecount
> -and the actual size of the ldt.
> +and the actual size of the LDT, although the kernel may act as though
> +the LDT is padded with additional trailing zero bytes.  On success,
> +.BR modify_ldt ()
> +will return the number of bytes read.
>  .PP
>  When
>  .I func
> -is 1,
> +is 1 or 0x11,
>  .BR modify_ldt ()
> -modifies one ldt entry.
> +modifies the LDT entry indicated by
> +.I ptr\->entry_number.
>  .I ptr
>  points to a
>  .I user_desc
> @@ -61,11 +68,6 @@ structure
>  and
>  .I bytecount
>  must equal the size of this structure.
> -.\"
> -.\" FIXME Should this page say something about func == 2 and func == 0x11?
> -.\" In Linux 2.4, func == 2 returned "the default ldt"
> -.\" In Linux 2.6, func == 2 is a nop, returning a zeroed out structure.
> -.\" Linux 2.4 and 2.6 implement an operation for func == 0x11
>  
>  The
>  .I user_desc
> @@ -89,12 +91,44 @@ struct user_desc {
>  .PP
>  In Linux 2.4 and earlier, this structure was named
>  .IR modify_ldt_ldt_s .
> -.\" .PP
> -.\" The ldt is specific for the calling process. Any attempts to change
> -.\" the ldt to include the address space of another process or the kernel
> -.\" will result in a segmentation violation when trying to access the memory
> -.\" outside of the process address space. The memory protection is enforced
> -.\" at the paging layer.
> +.PP
> +The
> +.I contents
> +field is the segment type (data, expand-down data, non-conforming code, or
> +conforming code).  The other fields match their descriptions in the
> +CPU manual, although
> +.BR modify_ldt ()
> +cannot set the accessed bit.

The "accessed bit" is mentioned here for the first time. Is this something
described in the CPU Manual? If so, we better say that. As it is, I started
hunting the rest of this man page for an explanation of this bit, without
success.

> +.PP
> +A
> +.I user_desc
> +is considered "empty" if
> +.I read_exec_only
> +and
> +.I seg_not_present
> +are set to 1 and all of the other fields are 0.
> +An LDT entry can be cleared by setting it to an "empty"
> +.I user_desc
> +or, if
> +.I func
> +is 1, by setting both
> +.I base
> +and
> +.I limit
> +to 0.
> +.PP
> +A conforming code segment will be rejected if
> +.I
> +func
> +is 1 or if
> +.I seg_not_present
> +is 0.

It's not clear what a "conforming code segment is". Should some words
be added here?

> +.PP
> +When
> +.I func
> +is 2,
> +.BR modify_ldt ()
> +will read zeros.  This appears to be a leftover from Linux 2.4.
>  .SH RETURN VALUE
>  On success,
>  .BR modify_ldt ()
> @@ -119,19 +153,40 @@ or
>  is 1 and
>  .I bytecount
>  is not equal to the size of the structure
> -.IR modify_ldt_ldt_s ,
> +.IR user_desc ,
>  or
>  .I func
> -is 1 and the new ldt entry has invalid values.
> +is 1 or 0x11 and the new ldt entry has invalid values.
>  .TP
>  .B ENOSYS
>  .I func
> -is neither 0 nor 1.
> +is neither 0, 1, 2, nor 0x11.
>  .SH CONFORMING TO
>  This call is Linux-specific and should not be used in programs intended
>  to be portable.
> +.SH BUGS
> +On 64-bit kernels before Linux 3.19, one of the padding bits in

Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?

> +.I user_desc,
> +if set, would prevent the descriptor from being considered empty.
>  .SH NOTES
>  Glibc does not provide a wrapper for this system call; call it using
>  .BR syscall (2).
> +.PP
> +.BR modify_ldt ()
> +should not be used for thread-local storage, as it slows down context
> +switches and only supports a limited number of threads.  Threading libraries
> +should use
> +.BR set_thread_area (2)
> +or
> +.BR arch_prctl (2)
> +instead, except on extremely old kernels that do not support those system
> +calls.
> +.PP
> +The normal use for
> +.BR modify_ldt (2)
> +is to run legacy 16-bit or segmented 32-bit code.  Not all kernels allow
> +16-bit segments to be installed, however.
>  .SH SEE ALSO
> +.BR set_thread_area (2),
> +.BR arch_prctl (2),
>  .BR vm86 (2)

Thanks,

Michael


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH manpages 1/2] modify_ldt.2: Overhaul the documentation

[Andy Lutomirski]

On Jan 30, 2015 8:18 AM, "Michael Kerrisk (man-pages)"
<mtk.manpages@gmail.com> wrote:
>
> Hi Andy,
>
> On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
> > This clarifies the behavior and documents all four functions.
>
> Thanks! I've merged this in a branch, pending one or two questions below.
>
> > Signed-off-by: Andy Lutomirski <luto@amacapital.net>
> > ---
> >  man2/modify_ldt.2 | 101 +++++++++++++++++++++++++++++++++++++++++-------------
> >  1 file changed, 78 insertions(+), 23 deletions(-)
> >
> > diff --git a/man2/modify_ldt.2 b/man2/modify_ldt.2
> > index d128664716c6..f3cc94d397b3 100644
> > --- a/man2/modify_ldt.2
> > +++ b/man2/modify_ldt.2
> > @@ -1,4 +1,5 @@
> >  .\" Copyright (c) 1995 Michael Chastain (mec@duracef.shout.net), 22 July 1995.
> > +.\" Copyright (c) 2015 Andrew Lutomirski
> >  .\"
> >  .\" %%%LICENSE_START(GPLv2+_DOC_FULL)
> >  .\" This is free documentation; you can redistribute it and/or
> > @@ -23,37 +24,43 @@
> >  .\"
> >  .TH MODIFY_LDT 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> >  .SH NAME
> > -modify_ldt \- get or set ldt
> > +modify_ldt \- get or set a per-process LDT entry
> >  .SH SYNOPSIS
> >  .nf
> >  .B #include <sys/types.h>
> >  .sp
> >  .BI "int modify_ldt(int " "func" ", void *" "ptr" ", unsigned long " "bytecount" );
> >  .fi
> > -
> > +.PP
> >  .IR Note :
> >  There is no glibc wrapper for this system call; see NOTES.
> >  .SH DESCRIPTION
> >  .BR modify_ldt ()
> > -reads or writes the local descriptor table (ldt) for a process.
> > -The ldt is a per-process memory management table used by the i386 processor.
> > -For more information on this table, see an Intel 386 processor handbook.
> > +reads or writes the local descriptor table (LDT) for a process.  The LDT
> > +is an array of segment descriptors that can be referenced by user code.
> > +Linux allows processes to configure a per-process (actually per-mm) LDT.
> > +For more information about the LDT, see the Intel Software Developer's
> > +Manual or the AMD Architecture Programming Manual.
> >  .PP
> >  When
> >  .I func
> >  is 0,
> >  .BR modify_ldt ()
> > -reads the ldt into the memory pointed to by
> > +reads the LDT into the memory pointed to by
> >  .IR ptr .
> >  The number of bytes read is the smaller of
> >  .I bytecount
> > -and the actual size of the ldt.
> > +and the actual size of the LDT, although the kernel may act as though
> > +the LDT is padded with additional trailing zero bytes.  On success,
> > +.BR modify_ldt ()
> > +will return the number of bytes read.
> >  .PP
> >  When
> >  .I func
> > -is 1,
> > +is 1 or 0x11,
> >  .BR modify_ldt ()
> > -modifies one ldt entry.
> > +modifies the LDT entry indicated by
> > +.I ptr\->entry_number.
> >  .I ptr
> >  points to a
> >  .I user_desc
> > @@ -61,11 +68,6 @@ structure
> >  and
> >  .I bytecount
> >  must equal the size of this structure.
> > -.\"
> > -.\" FIXME Should this page say something about func == 2 and func == 0x11?
> > -.\" In Linux 2.4, func == 2 returned "the default ldt"
> > -.\" In Linux 2.6, func == 2 is a nop, returning a zeroed out structure.
> > -.\" Linux 2.4 and 2.6 implement an operation for func == 0x11
> >
> >  The
> >  .I user_desc
> > @@ -89,12 +91,44 @@ struct user_desc {
> >  .PP
> >  In Linux 2.4 and earlier, this structure was named
> >  .IR modify_ldt_ldt_s .
> > -.\" .PP
> > -.\" The ldt is specific for the calling process. Any attempts to change
> > -.\" the ldt to include the address space of another process or the kernel
> > -.\" will result in a segmentation violation when trying to access the memory
> > -.\" outside of the process address space. The memory protection is enforced
> > -.\" at the paging layer.
> > +.PP
> > +The
> > +.I contents
> > +field is the segment type (data, expand-down data, non-conforming code, or
> > +conforming code).  The other fields match their descriptions in the
> > +CPU manual, although
> > +.BR modify_ldt ()
> > +cannot set the accessed bit.
>
> The "accessed bit" is mentioned here for the first time. Is this something
> described in the CPU Manual? If so, we better say that. As it is, I started
> hunting the rest of this man page for an explanation of this bit, without
> success.

Yes, it's in the CPU manual.  Could we say "cannot set the
hardware-defined accessed bit"?

>
> > +.PP
> > +A
> > +.I user_desc
> > +is considered "empty" if
> > +.I read_exec_only
> > +and
> > +.I seg_not_present
> > +are set to 1 and all of the other fields are 0.
> > +An LDT entry can be cleared by setting it to an "empty"
> > +.I user_desc
> > +or, if
> > +.I func
> > +is 1, by setting both
> > +.I base
> > +and
> > +.I limit
> > +to 0.
> > +.PP
> > +A conforming code segment will be rejected if
> > +.I
> > +func
> > +is 1 or if
> > +.I seg_not_present
> > +is 0.
>
> It's not clear what a "conforming code segment is". Should some words
> be added here?

How about "conforming code segment (i.e. contents == 3)"?

>
> > +.PP
> > +When
> > +.I func
> > +is 2,
> > +.BR modify_ldt ()
> > +will read zeros.  This appears to be a leftover from Linux 2.4.
> >  .SH RETURN VALUE
> >  On success,
> >  .BR modify_ldt ()
> > @@ -119,19 +153,40 @@ or
> >  is 1 and
> >  .I bytecount
> >  is not equal to the size of the structure
> > -.IR modify_ldt_ldt_s ,
> > +.IR user_desc ,
> >  or
> >  .I func
> > -is 1 and the new ldt entry has invalid values.
> > +is 1 or 0x11 and the new ldt entry has invalid values.
> >  .TP
> >  .B ENOSYS
> >  .I func
> > -is neither 0 nor 1.
> > +is neither 0, 1, 2, nor 0x11.
> >  .SH CONFORMING TO
> >  This call is Linux-specific and should not be used in programs intended
> >  to be portable.
> > +.SH BUGS
> > +On 64-bit kernels before Linux 3.19, one of the padding bits in
>
> Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?

Yes.

It could be worth adding a note somewhere that 64-bit kernels define a
user_desc bit called "lm", but that its only effect is to interfere
with detection of "empty" descriptors on older kernels.  It may be
further worth noting somewhere that it is not possible to use
modify_ldt(2) to install a long mode segment.

--Andy

>
> > +.I user_desc,
> > +if set, would prevent the descriptor from being considered empty.
> >  .SH NOTES
> >  Glibc does not provide a wrapper for this system call; call it using
> >  .BR syscall (2).
> > +.PP
> > +.BR modify_ldt ()
> > +should not be used for thread-local storage, as it slows down context
> > +switches and only supports a limited number of threads.  Threading libraries
> > +should use
> > +.BR set_thread_area (2)
> > +or
> > +.BR arch_prctl (2)
> > +instead, except on extremely old kernels that do not support those system
> > +calls.
> > +.PP
> > +The normal use for
> > +.BR modify_ldt (2)
> > +is to run legacy 16-bit or segmented 32-bit code.  Not all kernels allow
> > +16-bit segments to be installed, however.
> >  .SH SEE ALSO
> > +.BR set_thread_area (2),
> > +.BR arch_prctl (2),
> >  .BR vm86 (2)
>
> Thanks,
>
> Michael
>
>
> --
> Michael Kerrisk
> Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
> Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH manpages 1/2] modify_ldt.2: Overhaul the documentation

[Michael Kerrisk (man-pages)]

Hi Andy,
On 01/30/2015 03:42 PM, Andy Lutomirski wrote:
> On Jan 30, 2015 8:18 AM, "Michael Kerrisk (man-pages)"
> <mtk.manpages@gmail.com> wrote:
>>
>> Hi Andy,
>>
>> On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
>>> This clarifies the behavior and documents all four functions.
>>
>> Thanks! I've merged this in a branch, pending one or two questions below.
>>
>>> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
>>> ---
>>>  man2/modify_ldt.2 | 101 +++++++++++++++++++++++++++++++++++++++++-------------
>>>  1 file changed, 78 insertions(+), 23 deletions(-)
>>>
>>> diff --git a/man2/modify_ldt.2 b/man2/modify_ldt.2
>>> index d128664716c6..f3cc94d397b3 100644
>>> --- a/man2/modify_ldt.2
>>> +++ b/man2/modify_ldt.2

[...]

>>> +.PP
>>> +The
>>> +.I contents
>>> +field is the segment type (data, expand-down data, non-conforming code, or
>>> +conforming code).  The other fields match their descriptions in the
>>> +CPU manual, although
>>> +.BR modify_ldt ()
>>> +cannot set the accessed bit.
>>
>> The "accessed bit" is mentioned here for the first time. Is this something
>> described in the CPU Manual? If so, we better say that. As it is, I started
>> hunting the rest of this man page for an explanation of this bit, without
>> success.
> 
> Yes, it's in the CPU manual.  Could we say "cannot set the
> hardware-defined accessed bit"?

I made it "the hardware-defined "accessed" bit described in the CPU manual".

[...]

>>> +.PP
>>> +A conforming code segment will be rejected if
>>> +.I
>>> +func
>>> +is 1 or if
>>> +.I seg_not_present
>>> +is 0.
>>
>> It's not clear what a "conforming code segment is". Should some words
>> be added here?
> 
> How about "conforming code segment (i.e. contents == 3)"?

Done.


[...]

>>> +.SH BUGS
>>> +On 64-bit kernels before Linux 3.19, one of the padding bits in
>>
>> Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?
> 
> Yes.

Thanks. I dropped that into the page source.

> It could be worth adding a note somewhere that 64-bit kernels define a
> user_desc bit called "lm", but that its only effect is to interfere
> with detection of "empty" descriptors on older kernels.  

So, I changed the text here to:

[[
On 64-bit kernels before Linux 3.19,
.\" commit e30ab185c490e9a9381385529e0fd32f0a399495
setting the "lm" padding bit in
.IR user_desc
prevents the descriptor from being considered empty.
]]

> It may be
> further worth noting somewhere that it is not possible to use
> modify_ldt(2) to install a long mode segment.

Do you want to send a patch? (It would at least need to explain where 
one finds out about "long mode".)

Your revisions are now sitting in the branch at:
http://git.kernel.org/cgit/docs/man-pages/man-pages.git/log/?h=draft_luto

Thanks,

Michael


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

[PATCH manpages 2/2] arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS documentation

[Andy Lutomirski]

The documentation for set_thread_area was very vague.  This improves
it, accounts for recent kernel changes, and merges it with
get_thread_area.2.

While I'm at it, clarify the related arch_prctl.2 man page.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 man2/arch_prctl.2      | 22 +++++++-----
 man2/get_thread_area.2 | 58 +------------------------------
 man2/set_thread_area.2 | 93 ++++++++++++++++++++++++++++++++++++++++++++++----
 3 files changed, 102 insertions(+), 71 deletions(-)

diff --git a/man2/arch_prctl.2 b/man2/arch_prctl.2
index a3ab2b566915..c89fa3c7b744 100644
--- a/man2/arch_prctl.2
+++ b/man2/arch_prctl.2
@@ -114,27 +114,33 @@ The 64-bit base changes when a new 32-bit segment selector is loaded.
 is disabled in some kernels.
 
 Context switches for 64-bit segment bases are rather expensive.
-It may be a faster alternative to set a 32-bit base using a
-segment selector by setting up an LDT with
-.BR modify_ldt (2)
-or using the
+As an optimization, if a 32-bit TLS base address is used,
+.BR arch_prctl (2)
+may use a real TLS entry as if
 .BR set_thread_area (2)
-system call in kernel 2.5 or later.
-.BR arch_prctl ()
-is needed only when you want to set bases that are larger than 4GB.
+had been called instead of manipulating the segment base register directly.
 Memory in the first 2GB of address space can be allocated by using
 .BR mmap (2)
 with the
 .B MAP_32BIT
 flag.
 
+As a result, using
+.BR arch_prctl (2)
+and
+.BR set_thread_area (2)
+in the same thread is dangerous, as they may overwrite each other's
+TLS entries.
+
 As of version 2.7, glibc provides no prototype for
 .BR arch_prctl ().
 You have to declare it yourself for now.
 This may be fixed in future glibc versions.
 
 .I FS
-may be already used by the threading library.
+may be already used by the threading library.  Glibc programs that use
+.I ARCH_SET_FS
+directly are very likely to crash.
 .SH SEE ALSO
 .BR mmap (2),
 .BR modify_ldt (2),
diff --git a/man2/get_thread_area.2 b/man2/get_thread_area.2
index 08589e413cc4..a03fe54fb08e 100644
--- a/man2/get_thread_area.2
+++ b/man2/get_thread_area.2
@@ -1,57 +1 @@
-.\" Copyright (C) 2003 Free Software Foundation, Inc.
-.\" Written by Kent Yoder.
-.\"
-.\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
-.\" This file is distributed according to the GNU General Public License.
-.\" %%%LICENSE_END
-.\"
-.TH GET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
-.SH NAME
-get_thread_area \- get a thread-local storage (TLS) area
-.SH SYNOPSIS
-.B #include <linux/unistd.h>
-.br
-.B #include <asm/ldt.h>
-.sp
-.BI "int get_thread_area(struct user_desc *" u_info );
-
-.IR Note :
-There is no glibc wrapper for this system call; see NOTES.
-.SH DESCRIPTION
-.BR get_thread_area ()
-returns an entry in the current thread's thread-local storage (TLS) array.
-The index of the entry corresponds to the value
-of \fIu_info\->entry_number\fP, passed in by the user.
-If the value is in bounds,
-.BR get_thread_area ()
-copies the corresponding
-TLS entry into the area pointed to by \fIu_info\fP.
-.SH RETURN VALUE
-.BR get_thread_area ()
-returns 0 on success.
-Otherwise, it returns \-1 and sets
-.I errno
-appropriately.
-.SH ERRORS
-.TP
-.B EFAULT
-\fIu_info\fP is an invalid pointer.
-.TP
-.B EINVAL
-\fIu_info\->entry_number\fP is out of bounds.
-.SH VERSIONS
-A version of
-.BR get_thread_area ()
-first appeared in Linux 2.5.32.
-.SH CONFORMING TO
-.BR get_thread_area ()
-is Linux-specific and should not be used in programs
-that are intended to be portable.
-.SH NOTES
-Glibc does not provide a wrapper for this system call,
-since it is generally intended for use only by threading libraries.
-In the unlikely event that you want to call it directly, use
-.BR syscall (2).
-.SH SEE ALSO
-.BR modify_ldt (2),
-.BR set_thread_area (2)
+.so man2/set_thread_area.2
diff --git a/man2/set_thread_area.2 b/man2/set_thread_area.2
index 321beb396312..6acc5f79d1ad 100644
--- a/man2/set_thread_area.2
+++ b/man2/set_thread_area.2
@@ -1,25 +1,54 @@
 .\" Copyright (C) 2003 Free Software Foundation, Inc.
+.\" Copyright (C) 2015 Andrew Lutomirski
 .\" Author: Kent Yoder
 .\"
 .\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
 .\" This file is distributed according to the GNU General Public License.
 .\" %%%LICENSE_END
 .\"
-.TH SET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
+.TH SET_THREAD_AREA 2 2015-01-29 "Linux" "Linux Programmer's Manual"
 .SH NAME
-set_thread_area \- set a thread local storage (TLS) area
+set_thread_area \- set a GDT entry for thread-local storage
 .SH SYNOPSIS
 .B #include <linux/unistd.h>
 .br
 .B #include <asm/ldt.h>
 .sp
+.BI "int get_thread_area(struct user_desc *" u_info );
 .BI "int set_thread_area(struct user_desc *" u_info );
+.in +4n
+.nf
+
+struct user_desc {
+    unsigned int  entry_number;
+    unsigned long base_addr;
+    unsigned int  limit;
+    unsigned int  seg_32bit:1;
+    unsigned int  contents:2;
+    unsigned int  read_exec_only:1;
+    unsigned int  limit_in_pages:1;
+    unsigned int  seg_not_present:1;
+    unsigned int  useable:1;
+};
+.fi
+.in
 
 .IR Note :
 There is no glibc wrapper for this system call; see NOTES.
 .SH DESCRIPTION
+Linux dedicates three global descriptor table (GDT) entries for
+thread-local storage.  For more information about the LDT, see the
+Intel Software Developer's Manual or the AMD Architecture Programming Manual.
+
+.BR get_thread_area ()
+reads the GDT entry indicated by
+.I u_info\->entry_number
+and fills in the rest of the fields in
+.I u_info.
+
 .BR set_thread_area ()
-sets an entry in the current thread's thread-local storage (TLS) array.
+sets a TLS entry in the GDT.
+.PP
 The TLS array entry set by
 .BR set_thread_area ()
 corresponds to the value of
@@ -27,7 +56,7 @@ corresponds to the value of
 passed in by the user.
 If this value is in bounds,
 .BR set_thread_area ()
-copies the TLS descriptor pointed to by
+writes the TLS descriptor pointed to by
 .I u_info
 into the thread's TLS array.
 .PP
@@ -35,12 +64,29 @@ When
 .BR set_thread_area ()
 is passed an
 .I entry_number
-of \-1, it uses a free TLS entry.
+of \-1, it finds a free TLS entry.
 If
 .BR set_thread_area ()
 finds a free TLS entry, the value of
 .I u_info\->entry_number
 is set upon return to show which entry was changed.
+.PP
+A
+.I user_desc
+is considered "empty" if
+.I read_exec_only
+and
+.I seg_not_present
+are set to 1 and all of the other fields are 0.  If an "empty" descriptor
+is passed to
+.BR set_thread_area,
+the corresponding TLS entry will be cleared.  See BUGS for additional
+details.
+.PP
+On Linux 3.19 and newer,
+.BR set_thread_area ()
+cannot be used to write non-present segments, 16-bit segments, or code
+segments, although clearing a segment is still acceptable.
 .SH RETURN VALUE
 .BR set_thread_area ()
 returns 0 on success, and \-1 on failure, with
@@ -56,6 +102,11 @@ set appropriately.
 .TP
 .B ESRCH
 A free TLS entry could not be located.
+.B ENOSYS
+.BR get_thread_area (2)
+or
+.BR set_thread_area (2)
+was invoked as a 64-bit syscall.
 .SH VERSIONS
 A version of
 .BR set_thread_area ()
@@ -64,10 +115,40 @@ first appeared in Linux 2.5.29.
 .BR set_thread_area ()
 is Linux-specific and should not be used in programs that are intended
 to be portable.
+.SH BUGS
+On 64-bit kernels before Linux 3.19, one of the padding bits in
+.I user_desc,
+if set, would prevent the descriptor from being considered empty.
+As a result, the only reliable way to clear a TLS entry is to use
+memset to zero the entire
+.I user_desc
+structure, including padding bits, and then to set the
+.I read_exec_only
+and
+.I seg_not_present
+bits.  On Linux 3.19, a
+.I user_desc
+consisting entirely of zeros except for
+.I entry_number
+will also be interpreted as a request to clear a TLS entry, but this
+behaved differently on older kernels.
+.PP
+Prior to Linux 3.19, the DS and ES segment registers must not reference
+TLS entries.
 .SH NOTES
 Glibc does not provide a wrapper for this system call,
 since it is generally intended only for use by threading libraries.
 In the unlikely event that you want to call it directly, use
 .BR syscall (2).
+.PP
+.BR arch_prctl (2)
+can interfere with
+.BR set_thread_area (2).
+See
+.BR arch_prctl (2)
+for more details.  This is not normally a problem, as
+.BR arch_prctl (2)
+is normally only used by 64-bit programs.
 .SH SEE ALSO
-.BR get_thread_area (2)
+.BR arch_prctl (2),
+.BR modify_ldt (2)
-- 
2.1.0

Re: [PATCH manpages 2/2] arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS documentation

[Michael Kerrisk (man-pages)]

Hi Andy,

Thanks for this!

I've merged this into a branch and done some light editing. 
A few questions below.

On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
> The documentation for set_thread_area was very vague.  This improves
> it, accounts for recent kernel changes, and merges it with
> get_thread_area.2.

(Yep, merging seems a good idea.)
> 
> While I'm at it, clarify the related arch_prctl.2 man page.
> 
> Signed-off-by: Andy Lutomirski <luto-kltTT9wpgjJwATOyAt5JVQ@public.gmane.org>
> ---
>  man2/arch_prctl.2      | 22 +++++++-----
>  man2/get_thread_area.2 | 58 +------------------------------
>  man2/set_thread_area.2 | 93 ++++++++++++++++++++++++++++++++++++++++++++++----
>  3 files changed, 102 insertions(+), 71 deletions(-)
> 
> diff --git a/man2/arch_prctl.2 b/man2/arch_prctl.2
> index a3ab2b566915..c89fa3c7b744 100644
> --- a/man2/arch_prctl.2
> +++ b/man2/arch_prctl.2
> @@ -114,27 +114,33 @@ The 64-bit base changes when a new 32-bit segment selector is loaded.
>  is disabled in some kernels.
>  
>  Context switches for 64-bit segment bases are rather expensive.
> -It may be a faster alternative to set a 32-bit base using a
> -segment selector by setting up an LDT with
> -.BR modify_ldt (2)
> -or using the
> +As an optimization, if a 32-bit TLS base address is used,
> +.BR arch_prctl (2)
> +may use a real TLS entry as if
>  .BR set_thread_area (2)
> -system call in kernel 2.5 or later.
> -.BR arch_prctl ()
> -is needed only when you want to set bases that are larger than 4GB.
> +had been called instead of manipulating the segment base register directly.
>  Memory in the first 2GB of address space can be allocated by using
>  .BR mmap (2)
>  with the
>  .B MAP_32BIT
>  flag.
>  
> +As a result, using

Something doesn't quite flow here. "As a result" *of what*? Should this rather 
be something like:

    Because of the aforementioned optimization, using

> +.BR arch_prctl (2)
> +and
> +.BR set_thread_area (2)
> +in the same thread is dangerous, as they may overwrite each other's
> +TLS entries.
> +
>  As of version 2.7, glibc provides no prototype for
>  .BR arch_prctl ().
>  You have to declare it yourself for now.
>  This may be fixed in future glibc versions.
>  
>  .I FS
> -may be already used by the threading library.
> +may be already used by the threading library.  Glibc programs that use

What is a "Glibc program"?

> +.I ARCH_SET_FS
> +directly are very likely to crash.
>  .SH SEE ALSO
>  .BR mmap (2),
>  .BR modify_ldt (2),
> diff --git a/man2/get_thread_area.2 b/man2/get_thread_area.2
> index 08589e413cc4..a03fe54fb08e 100644
> --- a/man2/get_thread_area.2
> +++ b/man2/get_thread_area.2
> @@ -1,57 +1 @@
> -.\" Copyright (C) 2003 Free Software Foundation, Inc.
> -.\" Written by Kent Yoder.
> -.\"
> -.\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
> -.\" This file is distributed according to the GNU General Public License.
> -.\" %%%LICENSE_END
> -.\"
> -.TH GET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> -.SH NAME
> -get_thread_area \- get a thread-local storage (TLS) area
> -.SH SYNOPSIS
> -.B #include <linux/unistd.h>
> -.br
> -.B #include <asm/ldt.h>
> -.sp
> -.BI "int get_thread_area(struct user_desc *" u_info );
> -
> -.IR Note :
> -There is no glibc wrapper for this system call; see NOTES.
> -.SH DESCRIPTION
> -.BR get_thread_area ()
> -returns an entry in the current thread's thread-local storage (TLS) array.
> -The index of the entry corresponds to the value
> -of \fIu_info\->entry_number\fP, passed in by the user.
> -If the value is in bounds,
> -.BR get_thread_area ()
> -copies the corresponding
> -TLS entry into the area pointed to by \fIu_info\fP.
> -.SH RETURN VALUE
> -.BR get_thread_area ()
> -returns 0 on success.
> -Otherwise, it returns \-1 and sets
> -.I errno
> -appropriately.
> -.SH ERRORS
> -.TP
> -.B EFAULT
> -\fIu_info\fP is an invalid pointer.
> -.TP
> -.B EINVAL
> -\fIu_info\->entry_number\fP is out of bounds.
> -.SH VERSIONS
> -A version of
> -.BR get_thread_area ()
> -first appeared in Linux 2.5.32.
> -.SH CONFORMING TO
> -.BR get_thread_area ()
> -is Linux-specific and should not be used in programs
> -that are intended to be portable.
> -.SH NOTES
> -Glibc does not provide a wrapper for this system call,
> -since it is generally intended for use only by threading libraries.
> -In the unlikely event that you want to call it directly, use
> -.BR syscall (2).
> -.SH SEE ALSO
> -.BR modify_ldt (2),
> -.BR set_thread_area (2)
> +.so man2/set_thread_area.2
> diff --git a/man2/set_thread_area.2 b/man2/set_thread_area.2
> index 321beb396312..6acc5f79d1ad 100644
> --- a/man2/set_thread_area.2
> +++ b/man2/set_thread_area.2
> @@ -1,25 +1,54 @@
>  .\" Copyright (C) 2003 Free Software Foundation, Inc.
> +.\" Copyright (C) 2015 Andrew Lutomirski
>  .\" Author: Kent Yoder
>  .\"
>  .\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
>  .\" This file is distributed according to the GNU General Public License.
>  .\" %%%LICENSE_END
>  .\"
> -.TH SET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> +.TH SET_THREAD_AREA 2 2015-01-29 "Linux" "Linux Programmer's Manual"
>  .SH NAME
> -set_thread_area \- set a thread local storage (TLS) area
> +set_thread_area \- set a GDT entry for thread-local storage
>  .SH SYNOPSIS
>  .B #include <linux/unistd.h>
>  .br
>  .B #include <asm/ldt.h>
>  .sp
> +.BI "int get_thread_area(struct user_desc *" u_info );
>  .BI "int set_thread_area(struct user_desc *" u_info );
> +.in +4n
> +.nf
> +
> +struct user_desc {
> +    unsigned int  entry_number;
> +    unsigned long base_addr;
> +    unsigned int  limit;
> +    unsigned int  seg_32bit:1;
> +    unsigned int  contents:2;
> +    unsigned int  read_exec_only:1;
> +    unsigned int  limit_in_pages:1;
> +    unsigned int  seg_not_present:1;
> +    unsigned int  useable:1;
> +};
> +.fi
> +.in
>  
>  .IR Note :
>  There is no glibc wrapper for this system call; see NOTES.
>  .SH DESCRIPTION
> +Linux dedicates three global descriptor table (GDT) entries for
> +thread-local storage.  For more information about the LDT, see the

s/LDT/GDT? in the previous line, right?

> +Intel Software Developer's Manual or the AMD Architecture Programming Manual.
> +
> +.BR get_thread_area ()
> +reads the GDT entry indicated by
> +.I u_info\->entry_number
> +and fills in the rest of the fields in
> +.I u_info.
> +
>  .BR set_thread_area ()
> -sets an entry in the current thread's thread-local storage (TLS) array.
> +sets a TLS entry in the GDT.
> +.PP
>  The TLS array entry set by
>  .BR set_thread_area ()
>  corresponds to the value of
> @@ -27,7 +56,7 @@ corresponds to the value of
>  passed in by the user.
>  If this value is in bounds,
>  .BR set_thread_area ()
> -copies the TLS descriptor pointed to by
> +writes the TLS descriptor pointed to by
>  .I u_info
>  into the thread's TLS array.
>  .PP
> @@ -35,12 +64,29 @@ When
>  .BR set_thread_area ()
>  is passed an
>  .I entry_number
> -of \-1, it uses a free TLS entry.
> +of \-1, it finds a free TLS entry.

s/finds/searched for/ ?

>  If
>  .BR set_thread_area ()
>  finds a free TLS entry, the value of
>  .I u_info\->entry_number
>  is set upon return to show which entry was changed.
> +.PP
> +A
> +.I user_desc
> +is considered "empty" if
> +.I read_exec_only
> +and
> +.I seg_not_present
> +are set to 1 and all of the other fields are 0.  If an "empty" descriptor
> +is passed to
> +.BR set_thread_area,
> +the corresponding TLS entry will be cleared.  See BUGS for additional
> +details.
> +.PP
> +On Linux 3.19 and newer,
> +.BR set_thread_area ()
> +cannot be used to write non-present segments, 16-bit segments, or code
> +segments, although clearing a segment is still acceptable.
>  .SH RETURN VALUE
>  .BR set_thread_area ()
>  returns 0 on success, and \-1 on failure, with
> @@ -56,6 +102,11 @@ set appropriately.
>  .TP
>  .B ESRCH
>  A free TLS entry could not be located.
> +.B ENOSYS
> +.BR get_thread_area (2)
> +or
> +.BR set_thread_area (2)
> +was invoked as a 64-bit syscall.
>  .SH VERSIONS
>  A version of
>  .BR set_thread_area ()
> @@ -64,10 +115,40 @@ first appeared in Linux 2.5.29.
>  .BR set_thread_area ()
>  is Linux-specific and should not be used in programs that are intended
>  to be portable.
> +.SH BUGS
> +On 64-bit kernels before Linux 3.19, one of the padding bits in

Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?

> +.I user_desc,
> +if set, would prevent the descriptor from being considered empty.
> +As a result, the only reliable way to clear a TLS entry is to use
> +memset to zero the entire
> +.I user_desc
> +structure, including padding bits, and then to set the
> +.I read_exec_only
> +and
> +.I seg_not_present
> +bits.  On Linux 3.19, a
> +.I user_desc
> +consisting entirely of zeros except for
> +.I entry_number
> +will also be interpreted as a request to clear a TLS entry, but this
> +behaved differently on older kernels.
> +.PP
> +Prior to Linux 3.19, the DS and ES segment registers must not reference
> +TLS entries.
>  .SH NOTES
>  Glibc does not provide a wrapper for this system call,
>  since it is generally intended only for use by threading libraries.
>  In the unlikely event that you want to call it directly, use
>  .BR syscall (2).
> +.PP
> +.BR arch_prctl (2)
> +can interfere with
> +.BR set_thread_area (2).
> +See
> +.BR arch_prctl (2)
> +for more details.  This is not normally a problem, as
> +.BR arch_prctl (2)
> +is normally only used by 64-bit programs.
>  .SH SEE ALSO
> -.BR get_thread_area (2)
> +.BR arch_prctl (2),
> +.BR modify_ldt (2)

Thanks,

Michael



-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH manpages 2/2] arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS documentation

[Michael Kerrisk (man-pages)]

Hi Andy,

Thanks for this!

I've merged this into a branch and done some light editing. 
A few questions below.

On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
> The documentation for set_thread_area was very vague.  This improves
> it, accounts for recent kernel changes, and merges it with
> get_thread_area.2.

(Yep, merging seems a good idea.)
> 
> While I'm at it, clarify the related arch_prctl.2 man page.
> 
> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
> ---
>  man2/arch_prctl.2      | 22 +++++++-----
>  man2/get_thread_area.2 | 58 +------------------------------
>  man2/set_thread_area.2 | 93 ++++++++++++++++++++++++++++++++++++++++++++++----
>  3 files changed, 102 insertions(+), 71 deletions(-)
> 
> diff --git a/man2/arch_prctl.2 b/man2/arch_prctl.2
> index a3ab2b566915..c89fa3c7b744 100644
> --- a/man2/arch_prctl.2
> +++ b/man2/arch_prctl.2
> @@ -114,27 +114,33 @@ The 64-bit base changes when a new 32-bit segment selector is loaded.
>  is disabled in some kernels.
>  
>  Context switches for 64-bit segment bases are rather expensive.
> -It may be a faster alternative to set a 32-bit base using a
> -segment selector by setting up an LDT with
> -.BR modify_ldt (2)
> -or using the
> +As an optimization, if a 32-bit TLS base address is used,
> +.BR arch_prctl (2)
> +may use a real TLS entry as if
>  .BR set_thread_area (2)
> -system call in kernel 2.5 or later.
> -.BR arch_prctl ()
> -is needed only when you want to set bases that are larger than 4GB.
> +had been called instead of manipulating the segment base register directly.
>  Memory in the first 2GB of address space can be allocated by using
>  .BR mmap (2)
>  with the
>  .B MAP_32BIT
>  flag.
>  
> +As a result, using

Something doesn't quite flow here. "As a result" *of what*? Should this rather 
be something like:

    Because of the aforementioned optimization, using

> +.BR arch_prctl (2)
> +and
> +.BR set_thread_area (2)
> +in the same thread is dangerous, as they may overwrite each other's
> +TLS entries.
> +
>  As of version 2.7, glibc provides no prototype for
>  .BR arch_prctl ().
>  You have to declare it yourself for now.
>  This may be fixed in future glibc versions.
>  
>  .I FS
> -may be already used by the threading library.
> +may be already used by the threading library.  Glibc programs that use

What is a "Glibc program"?

> +.I ARCH_SET_FS
> +directly are very likely to crash.
>  .SH SEE ALSO
>  .BR mmap (2),
>  .BR modify_ldt (2),
> diff --git a/man2/get_thread_area.2 b/man2/get_thread_area.2
> index 08589e413cc4..a03fe54fb08e 100644
> --- a/man2/get_thread_area.2
> +++ b/man2/get_thread_area.2
> @@ -1,57 +1 @@
> -.\" Copyright (C) 2003 Free Software Foundation, Inc.
> -.\" Written by Kent Yoder.
> -.\"
> -.\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
> -.\" This file is distributed according to the GNU General Public License.
> -.\" %%%LICENSE_END
> -.\"
> -.TH GET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> -.SH NAME
> -get_thread_area \- get a thread-local storage (TLS) area
> -.SH SYNOPSIS
> -.B #include <linux/unistd.h>
> -.br
> -.B #include <asm/ldt.h>
> -.sp
> -.BI "int get_thread_area(struct user_desc *" u_info );
> -
> -.IR Note :
> -There is no glibc wrapper for this system call; see NOTES.
> -.SH DESCRIPTION
> -.BR get_thread_area ()
> -returns an entry in the current thread's thread-local storage (TLS) array.
> -The index of the entry corresponds to the value
> -of \fIu_info\->entry_number\fP, passed in by the user.
> -If the value is in bounds,
> -.BR get_thread_area ()
> -copies the corresponding
> -TLS entry into the area pointed to by \fIu_info\fP.
> -.SH RETURN VALUE
> -.BR get_thread_area ()
> -returns 0 on success.
> -Otherwise, it returns \-1 and sets
> -.I errno
> -appropriately.
> -.SH ERRORS
> -.TP
> -.B EFAULT
> -\fIu_info\fP is an invalid pointer.
> -.TP
> -.B EINVAL
> -\fIu_info\->entry_number\fP is out of bounds.
> -.SH VERSIONS
> -A version of
> -.BR get_thread_area ()
> -first appeared in Linux 2.5.32.
> -.SH CONFORMING TO
> -.BR get_thread_area ()
> -is Linux-specific and should not be used in programs
> -that are intended to be portable.
> -.SH NOTES
> -Glibc does not provide a wrapper for this system call,
> -since it is generally intended for use only by threading libraries.
> -In the unlikely event that you want to call it directly, use
> -.BR syscall (2).
> -.SH SEE ALSO
> -.BR modify_ldt (2),
> -.BR set_thread_area (2)
> +.so man2/set_thread_area.2
> diff --git a/man2/set_thread_area.2 b/man2/set_thread_area.2
> index 321beb396312..6acc5f79d1ad 100644
> --- a/man2/set_thread_area.2
> +++ b/man2/set_thread_area.2
> @@ -1,25 +1,54 @@
>  .\" Copyright (C) 2003 Free Software Foundation, Inc.
> +.\" Copyright (C) 2015 Andrew Lutomirski
>  .\" Author: Kent Yoder
>  .\"
>  .\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
>  .\" This file is distributed according to the GNU General Public License.
>  .\" %%%LICENSE_END
>  .\"
> -.TH SET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> +.TH SET_THREAD_AREA 2 2015-01-29 "Linux" "Linux Programmer's Manual"
>  .SH NAME
> -set_thread_area \- set a thread local storage (TLS) area
> +set_thread_area \- set a GDT entry for thread-local storage
>  .SH SYNOPSIS
>  .B #include <linux/unistd.h>
>  .br
>  .B #include <asm/ldt.h>
>  .sp
> +.BI "int get_thread_area(struct user_desc *" u_info );
>  .BI "int set_thread_area(struct user_desc *" u_info );
> +.in +4n
> +.nf
> +
> +struct user_desc {
> +    unsigned int  entry_number;
> +    unsigned long base_addr;
> +    unsigned int  limit;
> +    unsigned int  seg_32bit:1;
> +    unsigned int  contents:2;
> +    unsigned int  read_exec_only:1;
> +    unsigned int  limit_in_pages:1;
> +    unsigned int  seg_not_present:1;
> +    unsigned int  useable:1;
> +};
> +.fi
> +.in
>  
>  .IR Note :
>  There is no glibc wrapper for this system call; see NOTES.
>  .SH DESCRIPTION
> +Linux dedicates three global descriptor table (GDT) entries for
> +thread-local storage.  For more information about the LDT, see the

s/LDT/GDT? in the previous line, right?

> +Intel Software Developer's Manual or the AMD Architecture Programming Manual.
> +
> +.BR get_thread_area ()
> +reads the GDT entry indicated by
> +.I u_info\->entry_number
> +and fills in the rest of the fields in
> +.I u_info.
> +
>  .BR set_thread_area ()
> -sets an entry in the current thread's thread-local storage (TLS) array.
> +sets a TLS entry in the GDT.
> +.PP
>  The TLS array entry set by
>  .BR set_thread_area ()
>  corresponds to the value of
> @@ -27,7 +56,7 @@ corresponds to the value of
>  passed in by the user.
>  If this value is in bounds,
>  .BR set_thread_area ()
> -copies the TLS descriptor pointed to by
> +writes the TLS descriptor pointed to by
>  .I u_info
>  into the thread's TLS array.
>  .PP
> @@ -35,12 +64,29 @@ When
>  .BR set_thread_area ()
>  is passed an
>  .I entry_number
> -of \-1, it uses a free TLS entry.
> +of \-1, it finds a free TLS entry.

s/finds/searched for/ ?

>  If
>  .BR set_thread_area ()
>  finds a free TLS entry, the value of
>  .I u_info\->entry_number
>  is set upon return to show which entry was changed.
> +.PP
> +A
> +.I user_desc
> +is considered "empty" if
> +.I read_exec_only
> +and
> +.I seg_not_present
> +are set to 1 and all of the other fields are 0.  If an "empty" descriptor
> +is passed to
> +.BR set_thread_area,
> +the corresponding TLS entry will be cleared.  See BUGS for additional
> +details.
> +.PP
> +On Linux 3.19 and newer,
> +.BR set_thread_area ()
> +cannot be used to write non-present segments, 16-bit segments, or code
> +segments, although clearing a segment is still acceptable.
>  .SH RETURN VALUE
>  .BR set_thread_area ()
>  returns 0 on success, and \-1 on failure, with
> @@ -56,6 +102,11 @@ set appropriately.
>  .TP
>  .B ESRCH
>  A free TLS entry could not be located.
> +.B ENOSYS
> +.BR get_thread_area (2)
> +or
> +.BR set_thread_area (2)
> +was invoked as a 64-bit syscall.
>  .SH VERSIONS
>  A version of
>  .BR set_thread_area ()
> @@ -64,10 +115,40 @@ first appeared in Linux 2.5.29.
>  .BR set_thread_area ()
>  is Linux-specific and should not be used in programs that are intended
>  to be portable.
> +.SH BUGS
> +On 64-bit kernels before Linux 3.19, one of the padding bits in

Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?

> +.I user_desc,
> +if set, would prevent the descriptor from being considered empty.
> +As a result, the only reliable way to clear a TLS entry is to use
> +memset to zero the entire
> +.I user_desc
> +structure, including padding bits, and then to set the
> +.I read_exec_only
> +and
> +.I seg_not_present
> +bits.  On Linux 3.19, a
> +.I user_desc
> +consisting entirely of zeros except for
> +.I entry_number
> +will also be interpreted as a request to clear a TLS entry, but this
> +behaved differently on older kernels.
> +.PP
> +Prior to Linux 3.19, the DS and ES segment registers must not reference
> +TLS entries.
>  .SH NOTES
>  Glibc does not provide a wrapper for this system call,
>  since it is generally intended only for use by threading libraries.
>  In the unlikely event that you want to call it directly, use
>  .BR syscall (2).
> +.PP
> +.BR arch_prctl (2)
> +can interfere with
> +.BR set_thread_area (2).
> +See
> +.BR arch_prctl (2)
> +for more details.  This is not normally a problem, as
> +.BR arch_prctl (2)
> +is normally only used by 64-bit programs.
>  .SH SEE ALSO
> -.BR get_thread_area (2)
> +.BR arch_prctl (2),
> +.BR modify_ldt (2)

Thanks,

Michael



-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH manpages 2/2] arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS documentation

[Andy Lutomirski]

On Jan 30, 2015 8:59 AM, "Michael Kerrisk (man-pages)"
<mtk.manpages@gmail.com> wrote:
>
> Hi Andy,
>
> Thanks for this!
>
> I've merged this into a branch and done some light editing.
> A few questions below.
>
> On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
> > The documentation for set_thread_area was very vague.  This improves
> > it, accounts for recent kernel changes, and merges it with
> > get_thread_area.2.
>
> (Yep, merging seems a good idea.)
> >
> > While I'm at it, clarify the related arch_prctl.2 man page.
> >
> > Signed-off-by: Andy Lutomirski <luto@amacapital.net>
> > ---
> >  man2/arch_prctl.2      | 22 +++++++-----
> >  man2/get_thread_area.2 | 58 +------------------------------
> >  man2/set_thread_area.2 | 93 ++++++++++++++++++++++++++++++++++++++++++++++----
> >  3 files changed, 102 insertions(+), 71 deletions(-)
> >
> > diff --git a/man2/arch_prctl.2 b/man2/arch_prctl.2
> > index a3ab2b566915..c89fa3c7b744 100644
> > --- a/man2/arch_prctl.2
> > +++ b/man2/arch_prctl.2
> > @@ -114,27 +114,33 @@ The 64-bit base changes when a new 32-bit segment selector is loaded.
> >  is disabled in some kernels.
> >
> >  Context switches for 64-bit segment bases are rather expensive.
> > -It may be a faster alternative to set a 32-bit base using a
> > -segment selector by setting up an LDT with
> > -.BR modify_ldt (2)
> > -or using the
> > +As an optimization, if a 32-bit TLS base address is used,
> > +.BR arch_prctl (2)
> > +may use a real TLS entry as if
> >  .BR set_thread_area (2)
> > -system call in kernel 2.5 or later.
> > -.BR arch_prctl ()
> > -is needed only when you want to set bases that are larger than 4GB.
> > +had been called instead of manipulating the segment base register directly.
> >  Memory in the first 2GB of address space can be allocated by using
> >  .BR mmap (2)
> >  with the
> >  .B MAP_32BIT
> >  flag.
> >
> > +As a result, using
>
> Something doesn't quite flow here. "As a result" *of what*? Should this rather
> be something like:
>
>     Because of the aforementioned optimization, using

Sure.

>
> > +.BR arch_prctl (2)
> > +and
> > +.BR set_thread_area (2)
> > +in the same thread is dangerous, as they may overwrite each other's
> > +TLS entries.
> > +
> >  As of version 2.7, glibc provides no prototype for
> >  .BR arch_prctl ().
> >  You have to declare it yourself for now.
> >  This may be fixed in future glibc versions.
> >
> >  .I FS
> > -may be already used by the threading library.
> > +may be already used by the threading library.  Glibc programs that use
>
> What is a "Glibc program"?

A program that links against glibc.  Maybe that should just say "Programs".

The idea I'm trying to get across is that using ARCH_SET_FS for
private purposes is a bad idea, since your threading library
(glibc/libpthread) is very likely to use ARCH_SET_FS for its own
purposes.  ARCH_SET_GS, on the other hand, is more likely to be
available for private use.

This is most relevant for programs written for the purpose of testing
arch_prctl -- using ARCH_SET_FS following by calling any glibc
function is very likely to segfault.

>
> > +.I ARCH_SET_FS
> > +directly are very likely to crash.
> >  .SH SEE ALSO
> >  .BR mmap (2),
> >  .BR modify_ldt (2),
> > diff --git a/man2/get_thread_area.2 b/man2/get_thread_area.2
> > index 08589e413cc4..a03fe54fb08e 100644
> > --- a/man2/get_thread_area.2
> > +++ b/man2/get_thread_area.2
> > @@ -1,57 +1 @@
> > -.\" Copyright (C) 2003 Free Software Foundation, Inc.
> > -.\" Written by Kent Yoder.
> > -.\"
> > -.\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
> > -.\" This file is distributed according to the GNU General Public License.
> > -.\" %%%LICENSE_END
> > -.\"
> > -.TH GET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> > -.SH NAME
> > -get_thread_area \- get a thread-local storage (TLS) area
> > -.SH SYNOPSIS
> > -.B #include <linux/unistd.h>
> > -.br
> > -.B #include <asm/ldt.h>
> > -.sp
> > -.BI "int get_thread_area(struct user_desc *" u_info );
> > -
> > -.IR Note :
> > -There is no glibc wrapper for this system call; see NOTES.
> > -.SH DESCRIPTION
> > -.BR get_thread_area ()
> > -returns an entry in the current thread's thread-local storage (TLS) array.
> > -The index of the entry corresponds to the value
> > -of \fIu_info\->entry_number\fP, passed in by the user.
> > -If the value is in bounds,
> > -.BR get_thread_area ()
> > -copies the corresponding
> > -TLS entry into the area pointed to by \fIu_info\fP.
> > -.SH RETURN VALUE
> > -.BR get_thread_area ()
> > -returns 0 on success.
> > -Otherwise, it returns \-1 and sets
> > -.I errno
> > -appropriately.
> > -.SH ERRORS
> > -.TP
> > -.B EFAULT
> > -\fIu_info\fP is an invalid pointer.
> > -.TP
> > -.B EINVAL
> > -\fIu_info\->entry_number\fP is out of bounds.
> > -.SH VERSIONS
> > -A version of
> > -.BR get_thread_area ()
> > -first appeared in Linux 2.5.32.
> > -.SH CONFORMING TO
> > -.BR get_thread_area ()
> > -is Linux-specific and should not be used in programs
> > -that are intended to be portable.
> > -.SH NOTES
> > -Glibc does not provide a wrapper for this system call,
> > -since it is generally intended for use only by threading libraries.
> > -In the unlikely event that you want to call it directly, use
> > -.BR syscall (2).
> > -.SH SEE ALSO
> > -.BR modify_ldt (2),
> > -.BR set_thread_area (2)
> > +.so man2/set_thread_area.2
> > diff --git a/man2/set_thread_area.2 b/man2/set_thread_area.2
> > index 321beb396312..6acc5f79d1ad 100644
> > --- a/man2/set_thread_area.2
> > +++ b/man2/set_thread_area.2
> > @@ -1,25 +1,54 @@
> >  .\" Copyright (C) 2003 Free Software Foundation, Inc.
> > +.\" Copyright (C) 2015 Andrew Lutomirski
> >  .\" Author: Kent Yoder
> >  .\"
> >  .\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
> >  .\" This file is distributed according to the GNU General Public License.
> >  .\" %%%LICENSE_END
> >  .\"
> > -.TH SET_THREAD_AREA 2 2012-07-13 "Linux" "Linux Programmer's Manual"
> > +.TH SET_THREAD_AREA 2 2015-01-29 "Linux" "Linux Programmer's Manual"
> >  .SH NAME
> > -set_thread_area \- set a thread local storage (TLS) area
> > +set_thread_area \- set a GDT entry for thread-local storage
> >  .SH SYNOPSIS
> >  .B #include <linux/unistd.h>
> >  .br
> >  .B #include <asm/ldt.h>
> >  .sp
> > +.BI "int get_thread_area(struct user_desc *" u_info );
> >  .BI "int set_thread_area(struct user_desc *" u_info );
> > +.in +4n
> > +.nf
> > +
> > +struct user_desc {
> > +    unsigned int  entry_number;
> > +    unsigned long base_addr;
> > +    unsigned int  limit;
> > +    unsigned int  seg_32bit:1;
> > +    unsigned int  contents:2;
> > +    unsigned int  read_exec_only:1;
> > +    unsigned int  limit_in_pages:1;
> > +    unsigned int  seg_not_present:1;
> > +    unsigned int  useable:1;
> > +};
> > +.fi
> > +.in
> >
> >  .IR Note :
> >  There is no glibc wrapper for this system call; see NOTES.
> >  .SH DESCRIPTION
> > +Linux dedicates three global descriptor table (GDT) entries for
> > +thread-local storage.  For more information about the LDT, see the
>
> s/LDT/GDT? in the previous line, right?

Yes.

--Andy

>
> > +Intel Software Developer's Manual or the AMD Architecture Programming Manual.
> > +
> > +.BR get_thread_area ()
> > +reads the GDT entry indicated by
> > +.I u_info\->entry_number
> > +and fills in the rest of the fields in
> > +.I u_info.
> > +
> >  .BR set_thread_area ()
> > -sets an entry in the current thread's thread-local storage (TLS) array.
> > +sets a TLS entry in the GDT.
> > +.PP
> >  The TLS array entry set by
> >  .BR set_thread_area ()
> >  corresponds to the value of
> > @@ -27,7 +56,7 @@ corresponds to the value of
> >  passed in by the user.
> >  If this value is in bounds,
> >  .BR set_thread_area ()
> > -copies the TLS descriptor pointed to by
> > +writes the TLS descriptor pointed to by
> >  .I u_info
> >  into the thread's TLS array.
> >  .PP
> > @@ -35,12 +64,29 @@ When
> >  .BR set_thread_area ()
> >  is passed an
> >  .I entry_number
> > -of \-1, it uses a free TLS entry.
> > +of \-1, it finds a free TLS entry.
>
> s/finds/searched for/ ?

How about "searches for"?

>
> >  If
> >  .BR set_thread_area ()
> >  finds a free TLS entry, the value of
> >  .I u_info\->entry_number
> >  is set upon return to show which entry was changed.
> > +.PP
> > +A
> > +.I user_desc
> > +is considered "empty" if
> > +.I read_exec_only
> > +and
> > +.I seg_not_present
> > +are set to 1 and all of the other fields are 0.  If an "empty" descriptor
> > +is passed to
> > +.BR set_thread_area,
> > +the corresponding TLS entry will be cleared.  See BUGS for additional
> > +details.
> > +.PP
> > +On Linux 3.19 and newer,
> > +.BR set_thread_area ()
> > +cannot be used to write non-present segments, 16-bit segments, or code
> > +segments, although clearing a segment is still acceptable.
> >  .SH RETURN VALUE
> >  .BR set_thread_area ()
> >  returns 0 on success, and \-1 on failure, with
> > @@ -56,6 +102,11 @@ set appropriately.
> >  .TP
> >  .B ESRCH
> >  A free TLS entry could not be located.
> > +.B ENOSYS
> > +.BR get_thread_area (2)
> > +or
> > +.BR set_thread_area (2)
> > +was invoked as a 64-bit syscall.
> >  .SH VERSIONS
> >  A version of
> >  .BR set_thread_area ()
> > @@ -64,10 +115,40 @@ first appeared in Linux 2.5.29.
> >  .BR set_thread_area ()
> >  is Linux-specific and should not be used in programs that are intended
> >  to be portable.
> > +.SH BUGS
> > +On 64-bit kernels before Linux 3.19, one of the padding bits in
>
> Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?

Yes.

>
> > +.I user_desc,
> > +if set, would prevent the descriptor from being considered empty.
> > +As a result, the only reliable way to clear a TLS entry is to use
> > +memset to zero the entire
> > +.I user_desc
> > +structure, including padding bits, and then to set the
> > +.I read_exec_only
> > +and
> > +.I seg_not_present
> > +bits.  On Linux 3.19, a
> > +.I user_desc
> > +consisting entirely of zeros except for
> > +.I entry_number
> > +will also be interpreted as a request to clear a TLS entry, but this
> > +behaved differently on older kernels.
> > +.PP
> > +Prior to Linux 3.19, the DS and ES segment registers must not reference
> > +TLS entries.
> >  .SH NOTES
> >  Glibc does not provide a wrapper for this system call,
> >  since it is generally intended only for use by threading libraries.
> >  In the unlikely event that you want to call it directly, use
> >  .BR syscall (2).
> > +.PP
> > +.BR arch_prctl (2)
> > +can interfere with
> > +.BR set_thread_area (2).
> > +See
> > +.BR arch_prctl (2)
> > +for more details.  This is not normally a problem, as
> > +.BR arch_prctl (2)
> > +is normally only used by 64-bit programs.
> >  .SH SEE ALSO
> > -.BR get_thread_area (2)
> > +.BR arch_prctl (2),
> > +.BR modify_ldt (2)
>
> Thanks,
>
> Michael
>
>
>
> --
> Michael Kerrisk
> Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
> Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH manpages 2/2] arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS documentation

[Michael Kerrisk (man-pages)]

On 01/30/2015 03:45 PM, Andy Lutomirski wrote:
> On Jan 30, 2015 8:59 AM, "Michael Kerrisk (man-pages)"
> <mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>>
>> Hi Andy,
>>
>> Thanks for this!
>>
>> I've merged this into a branch and done some light editing.
>> A few questions below.
>>
>> On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
>>> The documentation for set_thread_area was very vague.  This improves
>>> it, accounts for recent kernel changes, and merges it with
>>> get_thread_area.2.
>>
>> (Yep, merging seems a good idea.)
>>>
>>> While I'm at it, clarify the related arch_prctl.2 man page.
>>>
>>> Signed-off-by: Andy Lutomirski <luto-kltTT9wpgjJwATOyAt5JVQ@public.gmane.org>
>>> ---
>>>  man2/arch_prctl.2      | 22 +++++++-----
>>>  man2/get_thread_area.2 | 58 +------------------------------
>>>  man2/set_thread_area.2 | 93 ++++++++++++++++++++++++++++++++++++++++++++++----
>>>  3 files changed, 102 insertions(+), 71 deletions(-)
>>>
>>> diff --git a/man2/arch_prctl.2 b/man2/arch_prctl.2
>>> index a3ab2b566915..c89fa3c7b744 100644
>>> --- a/man2/arch_prctl.2
>>> +++ b/man2/arch_prctl.2
>>> @@ -114,27 +114,33 @@ The 64-bit base changes when a new 32-bit segment selector is loaded.
>>>  is disabled in some kernels.
>>>
>>>  Context switches for 64-bit segment bases are rather expensive.
>>> -It may be a faster alternative to set a 32-bit base using a
>>> -segment selector by setting up an LDT with
>>> -.BR modify_ldt (2)
>>> -or using the
>>> +As an optimization, if a 32-bit TLS base address is used,
>>> +.BR arch_prctl (2)
>>> +may use a real TLS entry as if
>>>  .BR set_thread_area (2)
>>> -system call in kernel 2.5 or later.
>>> -.BR arch_prctl ()
>>> -is needed only when you want to set bases that are larger than 4GB.
>>> +had been called instead of manipulating the segment base register directly.
>>>  Memory in the first 2GB of address space can be allocated by using
>>>  .BR mmap (2)
>>>  with the
>>>  .B MAP_32BIT
>>>  flag.
>>>
>>> +As a result, using
>>
>> Something doesn't quite flow here. "As a result" *of what*? Should this rather
>> be something like:
>>
>>     Because of the aforementioned optimization, using
> 
> Sure.

Changed.

>>> +.BR arch_prctl (2)
>>> +and
>>> +.BR set_thread_area (2)
>>> +in the same thread is dangerous, as they may overwrite each other's
>>> +TLS entries.
>>> +
>>>  As of version 2.7, glibc provides no prototype for
>>>  .BR arch_prctl ().
>>>  You have to declare it yourself for now.
>>>  This may be fixed in future glibc versions.
>>>
>>>  .I FS
>>> -may be already used by the threading library.
>>> +may be already used by the threading library.  Glibc programs that use
>>
>> What is a "Glibc program"?
> 
> A program that links against glibc.  Maybe that should just say "Programs".


Okay /S/Glibc programs/Programs/

> The idea I'm trying to get across is that using ARCH_SET_FS for
> private purposes is a bad idea, since your threading library
> (glibc/libpthread) is very likely to use ARCH_SET_FS for its own
> purposes.  ARCH_SET_GS, on the other hand, is more likely to be
> available for private use.
> 
> This is most relevant for programs written for the purpose of testing
> arch_prctl -- using ARCH_SET_FS following by calling any glibc
> function is very likely to segfault.

(Okay.)

[...]

>>> diff --git a/man2/get_thread_area.2 b/man2/get_thread_area.2
>>> index 08589e413cc4..a03fe54fb08e 100644
>>> --- a/man2/set_thread_area.2
>>> +++ b/man2/set_thread_area.2
>>>  .IR Note :
>>>  There is no glibc wrapper for this system call; see NOTES.
>>>  .SH DESCRIPTION
>>> +Linux dedicates three global descriptor table (GDT) entries for
>>> +thread-local storage.  For more information about the LDT, see the
>>
>> s/LDT/GDT? in the previous line, right?
> 
> Yes.

Fixed.

>>> +Intel Software Developer's Manual or the AMD Architecture Programming Manual.
>>> +
>>> +.BR get_thread_area ()
>>> +reads the GDT entry indicated by
>>> +.I u_info\->entry_number
>>> +and fills in the rest of the fields in
>>> +.I u_info.
>>> +
>>>  .BR set_thread_area ()
>>> -sets an entry in the current thread's thread-local storage (TLS) array.
>>> +sets a TLS entry in the GDT.
>>> +.PP
>>>  The TLS array entry set by
>>>  .BR set_thread_area ()
>>>  corresponds to the value of
>>> @@ -27,7 +56,7 @@ corresponds to the value of
>>>  passed in by the user.
>>>  If this value is in bounds,
>>>  .BR set_thread_area ()
>>> -copies the TLS descriptor pointed to by
>>> +writes the TLS descriptor pointed to by
>>>  .I u_info
>>>  into the thread's TLS array.
>>>  .PP
>>> @@ -35,12 +64,29 @@ When
>>>  .BR set_thread_area ()
>>>  is passed an
>>>  .I entry_number
>>> -of \-1, it uses a free TLS entry.
>>> +of \-1, it finds a free TLS entry.
>>
>> s/finds/searched for/ ?
> 
> How about "searches for"?

D'oh! That's what I meant. Changed.

[...]

>>> +.SH BUGS
>>> +On 64-bit kernels before Linux 3.19, one of the padding bits in
>>
>> Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?
> 
> Yes.

Okay.

Thanks,

Michael


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH manpages 2/2] arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS documentation

[Michael Kerrisk (man-pages)]

On 01/30/2015 03:45 PM, Andy Lutomirski wrote:
> On Jan 30, 2015 8:59 AM, "Michael Kerrisk (man-pages)"
> <mtk.manpages@gmail.com> wrote:
>>
>> Hi Andy,
>>
>> Thanks for this!
>>
>> I've merged this into a branch and done some light editing.
>> A few questions below.
>>
>> On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
>>> The documentation for set_thread_area was very vague.  This improves
>>> it, accounts for recent kernel changes, and merges it with
>>> get_thread_area.2.
>>
>> (Yep, merging seems a good idea.)
>>>
>>> While I'm at it, clarify the related arch_prctl.2 man page.
>>>
>>> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
>>> ---
>>>  man2/arch_prctl.2      | 22 +++++++-----
>>>  man2/get_thread_area.2 | 58 +------------------------------
>>>  man2/set_thread_area.2 | 93 ++++++++++++++++++++++++++++++++++++++++++++++----
>>>  3 files changed, 102 insertions(+), 71 deletions(-)
>>>
>>> diff --git a/man2/arch_prctl.2 b/man2/arch_prctl.2
>>> index a3ab2b566915..c89fa3c7b744 100644
>>> --- a/man2/arch_prctl.2
>>> +++ b/man2/arch_prctl.2
>>> @@ -114,27 +114,33 @@ The 64-bit base changes when a new 32-bit segment selector is loaded.
>>>  is disabled in some kernels.
>>>
>>>  Context switches for 64-bit segment bases are rather expensive.
>>> -It may be a faster alternative to set a 32-bit base using a
>>> -segment selector by setting up an LDT with
>>> -.BR modify_ldt (2)
>>> -or using the
>>> +As an optimization, if a 32-bit TLS base address is used,
>>> +.BR arch_prctl (2)
>>> +may use a real TLS entry as if
>>>  .BR set_thread_area (2)
>>> -system call in kernel 2.5 or later.
>>> -.BR arch_prctl ()
>>> -is needed only when you want to set bases that are larger than 4GB.
>>> +had been called instead of manipulating the segment base register directly.
>>>  Memory in the first 2GB of address space can be allocated by using
>>>  .BR mmap (2)
>>>  with the
>>>  .B MAP_32BIT
>>>  flag.
>>>
>>> +As a result, using
>>
>> Something doesn't quite flow here. "As a result" *of what*? Should this rather
>> be something like:
>>
>>     Because of the aforementioned optimization, using
> 
> Sure.

Changed.

>>> +.BR arch_prctl (2)
>>> +and
>>> +.BR set_thread_area (2)
>>> +in the same thread is dangerous, as they may overwrite each other's
>>> +TLS entries.
>>> +
>>>  As of version 2.7, glibc provides no prototype for
>>>  .BR arch_prctl ().
>>>  You have to declare it yourself for now.
>>>  This may be fixed in future glibc versions.
>>>
>>>  .I FS
>>> -may be already used by the threading library.
>>> +may be already used by the threading library.  Glibc programs that use
>>
>> What is a "Glibc program"?
> 
> A program that links against glibc.  Maybe that should just say "Programs".


Okay /S/Glibc programs/Programs/

> The idea I'm trying to get across is that using ARCH_SET_FS for
> private purposes is a bad idea, since your threading library
> (glibc/libpthread) is very likely to use ARCH_SET_FS for its own
> purposes.  ARCH_SET_GS, on the other hand, is more likely to be
> available for private use.
> 
> This is most relevant for programs written for the purpose of testing
> arch_prctl -- using ARCH_SET_FS following by calling any glibc
> function is very likely to segfault.

(Okay.)

[...]

>>> diff --git a/man2/get_thread_area.2 b/man2/get_thread_area.2
>>> index 08589e413cc4..a03fe54fb08e 100644
>>> --- a/man2/set_thread_area.2
>>> +++ b/man2/set_thread_area.2
>>>  .IR Note :
>>>  There is no glibc wrapper for this system call; see NOTES.
>>>  .SH DESCRIPTION
>>> +Linux dedicates three global descriptor table (GDT) entries for
>>> +thread-local storage.  For more information about the LDT, see the
>>
>> s/LDT/GDT? in the previous line, right?
> 
> Yes.

Fixed.

>>> +Intel Software Developer's Manual or the AMD Architecture Programming Manual.
>>> +
>>> +.BR get_thread_area ()
>>> +reads the GDT entry indicated by
>>> +.I u_info\->entry_number
>>> +and fills in the rest of the fields in
>>> +.I u_info.
>>> +
>>>  .BR set_thread_area ()
>>> -sets an entry in the current thread's thread-local storage (TLS) array.
>>> +sets a TLS entry in the GDT.
>>> +.PP
>>>  The TLS array entry set by
>>>  .BR set_thread_area ()
>>>  corresponds to the value of
>>> @@ -27,7 +56,7 @@ corresponds to the value of
>>>  passed in by the user.
>>>  If this value is in bounds,
>>>  .BR set_thread_area ()
>>> -copies the TLS descriptor pointed to by
>>> +writes the TLS descriptor pointed to by
>>>  .I u_info
>>>  into the thread's TLS array.
>>>  .PP
>>> @@ -35,12 +64,29 @@ When
>>>  .BR set_thread_area ()
>>>  is passed an
>>>  .I entry_number
>>> -of \-1, it uses a free TLS entry.
>>> +of \-1, it finds a free TLS entry.
>>
>> s/finds/searched for/ ?
> 
> How about "searches for"?

D'oh! That's what I meant. Changed.

[...]

>>> +.SH BUGS
>>> +On 64-bit kernels before Linux 3.19, one of the padding bits in
>>
>> Was that commit e30ab185c490e9a9381385529e0fd32f0a399495 ?
> 
> Yes.

Okay.

Thanks,

Michael


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH manpages 0/2] Improve modify_ldt, [gs]et_thread_area docs

[Michael Kerrisk (man-pages)]

On 01/29/2015 10:47 PM, Andy Lutomirski wrote:
> The docs for set_thread_area, get_thread_area, and modify_ldt are pretty
> bad, and there have been a number of kernel changes lately.  Improve
> and update the docs.

Thanks very much for this, Andy! Those pages were indeed in a sorry 
state.

Cheers,

Michael

> Andy Lutomirski (2):
>   modify_ldt.2: Overhaul the documentation
>   arch_prctl.2, set_thread_area.2, get_thread_area.2: Improve TLS
>     documentation
> 
>  man2/arch_prctl.2      |  22 +++++++----
>  man2/get_thread_area.2 |  58 +---------------------------
>  man2/modify_ldt.2      | 101 ++++++++++++++++++++++++++++++++++++++-----------
>  man2/set_thread_area.2 |  93 ++++++++++++++++++++++++++++++++++++++++++---
>  4 files changed, 180 insertions(+), 94 deletions(-)
> 


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/