Re: [PATCH 26/36] serial: 8250_jz47xx: support for Ingenic jz47xx UARTs

[Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>]

Hi Greg,

On 30/01/15 23:31, Greg Kroah-Hartman wrote:
> On Sun, Jan 18, 2015 at 02:41:21PM -0800, Paul Burton wrote:
>> Introduce a driver suitable for use with the UARTs present in
>> Ingenic jz47xx series SoCs. These are described as being ns16550
>> compatible but aren't quite - they require the setting of an extra bit
>> in the FCR register to enable the UART module. The serial_out
>> implementation is the same as that in arch/mips/jz4740/serial.c - which
>> will shortly be removed.
>>
>> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Cc: Lars-Peter Clausen <lars@metafoo.de>
>> Cc: linux-serial@vger.kernel.org
>> ---
>>  drivers/tty/serial/8250/8250_jz47xx.c | 228 ++++++++++++++++++++++++++++++++++
>>  drivers/tty/serial/8250/Kconfig       |   8 ++
>>  drivers/tty/serial/8250/Makefile      |   1 +
>>  3 files changed, 237 insertions(+)
>>  create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c
> 
> This patch blows up on x86 systems, breaking the build :(

Ouch.

Did you compile after all the patches applied? Or after every single patch.

I can't manage to reproduce the build error with all of them applied.

Used x86_64_defconfig and enabled CONFIG_SERIAL_8250_JZ47XX=y

Thanks,
ZubairLK

> 
> Sorry, I can't take it.
> 
> greg k-h
>