* --should-not-have-used-
@ 2015-02-02 18:33 akuster808
2015-02-02 18:37 ` --should-not-have-used- Paul Eggleton
0 siblings, 1 reply; 2+ messages in thread
From: akuster808 @ 2015-02-02 18:33 UTC (permalink / raw)
To: OpenEmbedded Devel List
Hello,
I am now seeing an issue in one of my recipes during configure.
--should-not-have-used-/usr/bin/pcap-config
Is this indicating an issue with my recipe or with pcap?
binconfig-disabled.bbclass comments is not very helpful.
regards,
Armin
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: --should-not-have-used-
2015-02-02 18:33 --should-not-have-used- akuster808
@ 2015-02-02 18:37 ` Paul Eggleton
0 siblings, 0 replies; 2+ messages in thread
From: Paul Eggleton @ 2015-02-02 18:37 UTC (permalink / raw)
To: akuster808; +Cc: openembedded-devel
Hi Armin,
On Monday 02 February 2015 10:33:17 akuster808 wrote:
> I am now seeing an issue in one of my recipes during configure.
>
> --should-not-have-used-/usr/bin/pcap-config
>
>
> Is this indicating an issue with my recipe or with pcap?
>
> binconfig-disabled.bbclass comments is not very helpful.
Here is a brief description of the change from our migration guide:
http://www.yoctoproject.org/docs/1.7/ref-manual/ref-manual.html#migration-1.7-binary-configuration-scripts-disabled
Short answer: change the software your recipe is building to use pkg-config
instead of pcap-config.
Cheers,
Paul
--
Paul Eggleton
Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-02-02 18:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-02 18:33 --should-not-have-used- akuster808
2015-02-02 18:37 ` --should-not-have-used- Paul Eggleton
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.