[RESEND PATCH V3 13/15] ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update

[RESEND PATCH V3 13/15] ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update

[Sylwester Nawrocki]

Clock related properties are added to the Exynos4 I2S device nodes
so they can be referred to as clock providers. Missing i2s_opclk1
clock is added to the I2S0 node and clock properties are added
to the MAX98090 codec node to allow it to control/read frequency
of the MCLK clock directly.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi                  |    6 ++++++
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi |    8 ++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b8168f1..38d8f68 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -61,6 +61,8 @@
 		reg = <0x03830000 0x100>;
 		clocks = <&clock_audss EXYNOS_I2S_BUS>;
 		clock-names = "iis";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk0";
 		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
 		dma-names = "tx", "rx", "tx-sec";
 		samsung,idma-addr = <0x03000000>;
@@ -372,6 +374,8 @@
 		reg = <0x13960000 0x100>;
 		clocks = <&clock CLK_I2S1>;
 		clock-names = "iis";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk1";
 		dmas = <&pdma1 12>, <&pdma1 11>;
 		dma-names = "tx", "rx";
 		status = "disabled";
@@ -382,6 +386,8 @@
 		reg = <0x13970000 0x100>;
 		clocks = <&clock CLK_I2S2>;
 		clock-names = "iis";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk2";
 		dmas = <&pdma0 14>, <&pdma0 13>;
 		dma-names = "tx", "rx";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 3fbf588..c26b9fb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -7,6 +7,7 @@
  * published by the Free Software Foundation.
 */

+#include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
 #include "exynos4412.dtsi"

@@ -37,8 +38,9 @@
 		pinctrl-names = "default";
 		status = "okay";
 		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			 <&clock_audss EXYNOS_DOUT_AUD_BUS>;
-		clock-names = "iis", "i2s_opclk0";
+			 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			 <&clock_audss EXYNOS_SCLK_I2S>;
+		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 	};

 	sound: sound {
@@ -373,6 +375,8 @@
 			reg = <0x10>;
 			interrupt-parent = <&gpx0>;
 			interrupts = <0 0>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			clock-names = "mclk";
 		};
 	};

--
1.7.9.5

[RESEND PATCH V3 14/15] ARM: dts: Switch Odroid X2/U2 to simple-audio-card

[Sylwester Nawrocki]

Now when the CDCLK I2S output clock can be handled through the clock
API the Odroid X2/U3 can be switched to the simple-audio-card DT binding.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi                  |    3 +++
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   19 ++++++++++++++++---
 arch/arm/boot/dts/exynos4412-odroidu3.dts       |    8 +++++---
 arch/arm/boot/dts/exynos4412-odroidx2.dts       |    8 ++++++--
 4 files changed, 30 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 38d8f68..0cffe39 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -66,6 +66,7 @@
 		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
 		dma-names = "tx", "rx", "tx-sec";
 		samsung,idma-addr = <0x03000000>;
+		#sound-dai-cells = <1>;
 		status = "disabled";
 	};

@@ -378,6 +379,7 @@
 		clock-output-names = "i2s_cdclk1";
 		dmas = <&pdma1 12>, <&pdma1 11>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <1>;
 		status = "disabled";
 	};

@@ -390,6 +392,7 @@
 		clock-output-names = "i2s_cdclk2";
 		dmas = <&pdma0 14>, <&pdma0 13>;
 		dma-names = "tx", "rx";
+		#sound-dai-cells = <1>;
 		status = "disabled";
 	};

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index c26b9fb..abd6336 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -44,9 +44,7 @@
 	};

 	sound: sound {
-		compatible = "samsung,odroidx2-audio";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98090>;
+		compatible = "simple-audio-card";
 		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
 				<&clock_audss EXYNOS_MOUT_I2S>,
 				<&clock_audss EXYNOS_DOUT_SRP>,
@@ -57,6 +55,20 @@
 				<0>,
 				<192000000>,
 				<19200000>;
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		};
 	};

 	mmc@12550000 {
@@ -377,6 +389,7 @@
 			interrupts = <0 0>;
 			clocks = <&i2s0 CLK_I2S_CDCLK>;
 			clock-names = "mclk";
+			#sound-dai-cells = <0>;
 		};
 	};

diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index c8a64be..44684e5 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -49,9 +49,11 @@
 };

 &sound {
-	compatible = "samsung,odroidu3-audio";
-	samsung,model = "Odroid-U3";
-	samsung,audio-routing =
+	simple-audio-card,name = "Odroid-U3";
+	simple-audio-card,widgets =
+		"Headphone", "Headphone Jack",
+		"Speakers", "Speakers";
+	simple-audio-card,routing =
 		"Headphone Jack", "HPL",
 		"Headphone Jack", "HPR",
 		"Headphone Jack", "MICBIAS",
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index 96b43f4..6e33678 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -23,8 +23,12 @@
 };

 &sound {
-	samsung,model = "Odroid-X2";
-	samsung,audio-routing =
+	simple-audio-card,name = "Odroid-X2";
+	simple-audio-card,widgets =
+		"Headphone", "Headphone Jack",
+		"Microphone", "Mic Jack",
+		"Microphone", "DMIC";
+	simple-audio-card,routing =
 		"Headphone Jack", "HPL",
 		"Headphone Jack", "HPR",
 		"IN1", "Mic Jack",
--
1.7.9.5

[RESEND PATCH V3 15/15] ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs

[Sylwester Nawrocki]

I2S1, I2S2 on Exynos4 SoC series have limited functionality compared
to I2S0, "samsung,s3c6410-i2s" compatible should be used for them.

Cc: stable@vger.kernel.org
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 0cffe39..cb60010 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -371,7 +371,7 @@
 	};

 	i2s1: i2s@13960000 {
-		compatible = "samsung,s5pv210-i2s";
+		compatible = "samsung,s3c6410-i2s";
 		reg = <0x13960000 0x100>;
 		clocks = <&clock CLK_I2S1>;
 		clock-names = "iis";
@@ -384,7 +384,7 @@
 	};

 	i2s2: i2s@13970000 {
-		compatible = "samsung,s5pv210-i2s";
+		compatible = "samsung,s3c6410-i2s";
 		reg = <0x13970000 0x100>;
 		clocks = <&clock CLK_I2S2>;
 		clock-names = "iis";
--
1.7.9.5

Re: [RESEND PATCH V3 15/15] ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 603 bytes --]

On Tue, Feb 03, 2015 at 03:06:22PM +0100, Sylwester Nawrocki wrote:
> I2S1, I2S2 on Exynos4 SoC series have limited functionality compared
> to I2S0, "samsung,s3c6410-i2s" compatible should be used for them.

I've applied this even though I really shouldn't in order to get it in.
Since it's a bug fix for stable it should've been near the head of any
series it's part of not the very last patch in the series, and since
it's not really related to the rest of the series except in that it
relates to the same driver it should probably have been sent by itself
rather than mixed in with everything else.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [RESEND PATCH V3 15/15] ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs

[Sylwester Nawrocki]

On 05/02/15 20:41, Mark Brown wrote:
> On Tue, Feb 03, 2015 at 03:06:22PM +0100, Sylwester Nawrocki wrote:
>> I2S1, I2S2 on Exynos4 SoC series have limited functionality compared
>> to I2S0, "samsung,s3c6410-i2s" compatible should be used for them.
> 
> I've applied this even though I really shouldn't in order to get it in.
> Since it's a bug fix for stable it should've been near the head of any
> series it's part of not the very last patch in the series, and since
> it's not really related to the rest of the series except in that it
> relates to the same driver it should probably have been sent by itself
> rather than mixed in with everything else.

Indeed I could sent this one separately to Kukjin, the issue it fixes
was just found in the course of creating remaining part of the series
and I wanted to keep somewhat related changes together.
Thank you for merging it.  I hope you picked up the previous 2 as well,
I couldn't see them in your tree.

Re: [RESEND PATCH V3 15/15] ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 327 bytes --]

On Fri, Feb 06, 2015 at 12:30:45PM +0100, Sylwester Nawrocki wrote:

> Thank you for merging it.  I hope you picked up the previous 2 as well,
> I couldn't see them in your tree.

I probably will if I don't hear anything but since they don't need to go
as a bug fix I can leave Kukjin a bit longer to say if he's OK with
that.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [RESEND PATCH V3 13/15] ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 385 bytes --]

On Tue, Feb 03, 2015 at 03:06:20PM +0100, Sylwester Nawrocki wrote:
> Clock related properties are added to the Exynos4 I2S device nodes
> so they can be referred to as clock providers. Missing i2s_opclk1
> clock is added to the I2S0 node and clock properties are added
> to the MAX98090 codec node to allow it to control/read frequency
> of the MCLK clock directly.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [RESEND PATCH V3 14/15] ARM: dts: Switch Odroid X2/U2 to simple-audio-card

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 233 bytes --]

On Tue, Feb 03, 2015 at 03:06:21PM +0100, Sylwester Nawrocki wrote:
> Now when the CDCLK I2S output clock can be handled through the clock
> API the Odroid X2/U3 can be switched to the simple-audio-card DT binding.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]