* [meta-fsl-arm-extra] kernel update for SabreLite?
@ 2015-02-06 12:15 Gary Thomas
2015-02-06 12:21 ` Otavio Salvador
0 siblings, 1 reply; 2+ messages in thread
From: Gary Thomas @ 2015-02-06 12:15 UTC (permalink / raw)
To: meta-freescale@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 933 bytes --]
A fresh (yesterday) build for the Nitrogen6x (SabreLite)
can no longer run X, due to a mismatch of kernel (3.10.31)
and video components (3.10.53).
I built with these repositories:
meta-fsl-arm = "master:95e0861135ffa5f42828d9419788b3db9946861f"
meta-fsl-arm-extra = "master:9c3dc2a63f637319d877e8fecba3ed7197f44d43"
The failing X server log is attached.
The relevant packages are:
firmware-imx-vpu-imx6d - 1:3.10.53-1.1.0-r0.0
firmware-imx-vpu-imx6q - 1:3.10.53-1.1.0-r0.0
imx-lib - 1:3.10.53-1.1.0-r0.0
kernel-3.10.31-1.1.0-beta+yocto - 3.10.31-r0.19
xf86-video-imxfb-vivante - 3:3.10.53-1.1.0-r0.0
'kernel' came from meta-fsl-arm-extra/linux-boundary
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 11241 bytes --]
[1590446.109]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[1590446.109] X Protocol Version 11, Revision 0
[1590446.110] Build Operating System: Linux 2.6.34.9-69.fc13.i686.PAE i686
[1590446.110] Current Operating System: Linux nitrogen6x 3.10.31-1.1.0_beta+yocto #1 SMP Thu Feb 5 08:17:34 MST 2015 armv7l
[1590446.110] Kernel command line: enable_wait_mode=off video=mxcfb0:dev=lcd,CLAA-WVGA,if=RGB666 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=10M console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait root=/dev/mmcblk3p2 mxc_hdmi.only_cea=1
[1590446.110] Build Date: 05 February 2015 08:49:21AM
[1590446.110]
[1590446.110] Current version of pixman: 0.32.6
[1590446.110] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1590446.111] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1590446.111] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 6 12:10:21 2015
[1590446.112] (==) Using config file: "/etc/X11/xorg.conf"
[1590446.112] (==) Using config directory: "/etc/X11/xorg.conf.d"
[1590446.112] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[1590446.114] (==) No Layout section. Using the first Screen section.
[1590446.114] (==) No screen section available. Using defaults.
[1590446.114] (**) |-->Screen "Default Screen Section" (0)
[1590446.114] (**) | |-->Monitor "<default monitor>"
[1590446.115] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[1590446.115] (**) | |-->Device "i.MX Accelerated Framebuffer Device"
[1590446.116] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[1590446.116] (**) Option "BlankTime" "0"
[1590446.116] (**) Option "StandbyTime" "0"
[1590446.116] (**) Option "SuspendTime" "0"
[1590446.116] (**) Option "OffTime" "0"
[1590446.116] (==) Automatically adding devices
[1590446.116] (==) Automatically enabling devices
[1590446.116] (==) Automatically adding GPU devices
[1590446.117] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[1590446.117] Entry deleted from font path.
[1590446.117] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[1590446.117] Entry deleted from font path.
[1590446.117] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[1590446.117] Entry deleted from font path.
[1590446.117] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[1590446.117] Entry deleted from font path.
[1590446.117] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[1590446.117] Entry deleted from font path.
[1590446.117] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[1590446.117] Entry deleted from font path.
[1590446.117] (==) FontPath set to:
[1590446.117] (==) ModulePath set to "/usr/lib/xorg/modules"
[1590446.117] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[1590446.117] (II) Loader magic: 0x1b0be0
[1590446.117] (II) Module ABI versions:
[1590446.117] X.Org ANSI C Emulation: 0.4
[1590446.118] X.Org Video Driver: 18.0
[1590446.118] X.Org XInput driver : 21.0
[1590446.118] X.Org Server Extension : 8.0
[1590446.119] (II) xfree86: Adding drm device (/dev/dri/card0)
[1590446.120] (II) no primary bus or device found
[1590446.121] falling back to /sys/devices/platform/Vivante GCCore/drm/card0
[1590446.121] (II) LoadModule: "glx"
[1590446.122] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[1590446.140] (II) Module glx: vendor="X.Org Foundation"
[1590446.141] compiled for 1.16.2, module version = 1.0.0
[1590446.141] ABI class: X.Org Server Extension, version 8.0
[1590446.141] (==) AIGLX enabled
[1590446.141] (II) LoadModule: "vivante"
[1590446.142] (II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
[1590446.142] (II) Module vivante: vendor="X.Org Foundation"
[1590446.142] compiled for 1.16.2, module version = 1.0.0
[1590446.142] Module class: X.Org Video Driver
[1590446.142] ABI class: X.Org Video Driver, version 18.0
[1590446.142] (II) VIVANTE: driver for vivante fb: VivanteGC500, VivanteGC2100,
VivanteGCCORE
[1590446.142] (--) using VT number 3
[1590446.146] (WW) Falling back to old probe method for vivante
[1590446.146] (II) Loading sub module "fbdevhw"
[1590446.146] (II) LoadModule: "fbdevhw"
[1590446.146] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[1590446.146] (II) Module fbdevhw: vendor="X.Org Foundation"
[1590446.146] compiled for 1.16.2, module version = 0.0.2
[1590446.146] ABI class: X.Org Video Driver, version 18.0
[1590446.147] (II) VIVANTE(0): using default device
[1590446.206] (II) VIVANTE(0): Device preferred mode 'fb0':U:800x480p-57
[1590446.206] (II) VIVANTE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[1590446.206] (==) VIVANTE(0): Depth 16, (==) framebuffer bpp 16
[1590446.206] (==) VIVANTE(0): RGB weight 565
[1590446.206] (==) VIVANTE(0): Default visual is TrueColor
[1590446.206] (==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
[1590446.206] (**) VIVANTE(0): Option "fbdev" "/dev/fb0"
[1590446.206] (II) VIVANTE(0): checking modes against framebuffer device...
[1590446.206] (II) VIVANTE(0): checking modes against monitor...
[1590446.206] (II) VIVANTE(0): Use built in mode (bpp 16)
[1590446.206] (--) VIVANTE(0): Virtual size is 0x0 (pitch 0)
[1590446.206] (==) VIVANTE(0): DPI set to (96, 96)
[1590446.206] (II) Loading sub module "fb"
[1590446.206] (II) LoadModule: "fb"
[1590446.207] (II) Loading /usr/lib/xorg/modules/libfb.so
[1590446.207] (II) Module fb: vendor="X.Org Foundation"
[1590446.207] compiled for 1.16.2, module version = 1.0.0
[1590446.207] ABI class: X.Org ANSI C Emulation, version 0.4
[1590446.207] (II) Loading sub module "exa"
[1590446.207] (II) LoadModule: "exa"
[1590446.208] (II) Loading /usr/lib/xorg/modules/libexa.so
[1590446.208] (II) Module exa: vendor="X.Org Foundation"
[1590446.208] compiled for 1.16.2, module version = 2.6.0
[1590446.208] ABI class: X.Org Video Driver, version 18.0
[1590446.276] (II) VIVANTE(0): printing discovered frame buffer 'fb0' supported modes:
[1590446.276] (II) VIVANTE(0): Modeline "U:800x480p-57"x0.0 27.00 800 860 880 920 480 490 500 510 -hsync -vsync -csync (29.3 kHz eP)
[1590446.277] (II) VIVANTE(0): Modeline "U:1280x120p-60"x0.0 22.22 1280 1334 1337 1391 120 123 126 129 -hsync -vsync -csync (16.0 kHz e)
[1590446.277] (II) VIVANTE(0): Modeline "U:480x272p-60"x0.0 10.23 480 481 522 524 272 274 284 287 -hsync -vsync -csync (19.5 kHz e)
[1590446.278] (II) VIVANTE(0): Modeline "D:1920x1080i-50"x0.0 74.25 1920 1923 2643 2663 1080 1082 1083 1103 interlace +hsync +vsync -csync (27.9 kHz e)
[1590446.278] (II) VIVANTE(0): Modeline "D:1920x1080i-60"x0.0 74.25 1920 1923 2203 2223 1080 1082 1083 1103 interlace +hsync +vsync -csync (33.4 kHz e)
[1590446.278] (II) VIVANTE(0): Modeline "D:720x576i-25"x0.0 13.50 720 722 870 892 576 578 579 602 interlace +hsync +vsync -csync (15.1 kHz e)
[1590446.279] (II) VIVANTE(0): Modeline "D:720x480i-30"x0.0 13.50 720 723 865 884 480 483 484 504 interlace +hsync +vsync -csync (15.3 kHz e)
[1590446.279] (II) VIVANTE(0): Modeline "D:720x576i-50"x0.0 27.00 720 722 1010 1032 576 578 579 602 interlace +hsync +vsync -csync (26.2 kHz e)
[1590446.279] (II) VIVANTE(0): Modeline "D:720x480i-60"x0.0 27.00 720 723 999 1018 480 483 484 504 interlace +hsync +vsync -csync (26.5 kHz e)
[1590446.280] (II) VIVANTE(0): Modeline "U:800x480p-60"x0.0 33.50 800 964 974 1063 480 490 500 523 -hsync -vsync -csync (31.5 kHz e)
[1590446.280] (II) VIVANTE(0): Modeline "U:800x480p-57"x0.0 27.00 800 860 880 920 480 490 500 510 -hsync -vsync -csync (29.3 kHz eP)
[1590446.317] (II) VIVANTE(0): Output DISP3 BG has no monitor section
[1590446.318] (II) VIVANTE(0): Not using mode "D:1920x1080i-50" (interlace mode not supported)
[1590446.318] (II) VIVANTE(0): Not using mode "D:1920x1080i-60" (interlace mode not supported)
[1590446.318] (II) VIVANTE(0): Not using mode "D:720x576i-25" (interlace mode not supported)
[1590446.318] (II) VIVANTE(0): Not using mode "D:720x480i-30" (interlace mode not supported)
[1590446.318] (II) VIVANTE(0): Not using mode "D:720x576i-50" (interlace mode not supported)
[1590446.318] (II) VIVANTE(0): Not using mode "D:720x480i-60" (interlace mode not supported)
[1590446.318] (II) VIVANTE(0): Printing probed modes for output DISP3 BG
[1590446.318] (II) VIVANTE(0): Modeline "U:800x480p-57"x57.5 27.00 800 860 880 920 480 490 500 510 -hsync -vsync -csync (29.3 kHz eP)
[1590446.318] (II) VIVANTE(0): Modeline "U:800x480p-60"x60.3 33.50 800 964 974 1063 480 490 500 523 -hsync -vsync -csync (31.5 kHz e)
[1590446.318] (II) VIVANTE(0): Modeline "U:1280x120p-60"x123.8 22.22 1280 1334 1337 1391 120 123 126 129 -hsync -vsync -csync (16.0 kHz e)
[1590446.318] (II) VIVANTE(0): Modeline "U:480x272p-60"x68.0 10.23 480 481 522 524 272 274 284 287 -hsync -vsync -csync (19.5 kHz e)
[1590446.318] (II) VIVANTE(0): Output DISP3 BG connected
[1590446.318] (II) VIVANTE(0): Using exact sizes for initial modes
[1590446.319] (II) VIVANTE(0): Output DISP3 BG using initial mode U:800x480p-57
[1590446.319] (II) VIVANTE(0): imxDisplayPreInit: virtual set 800 x 480, display width 0
[1590446.319] (II) VIVANTE(0): FBDevPreInit: adjust display width 800
[1590446.319] (**) VIVANTE(0): PreInit done
[1590446.323] (II) VIVANTE(0): Init mode for fb device
[1590446.365] (II) VIVANTE(0): hardware: DISP3 BG (video memory: 8162kB)
[1590446.366] (II) VIVANTE(0): FB Start = 0xb5e9f000 FB Base = 0xb5e9f000 FB Offset = (nil) FB PhyBase 0x2fc00000
[1590446.366] (II) VIVANTE(0): reserve 4177920 bytes for on screen frame buffer; total fb memory size 8358400 bytes; offset of shadow buffer 4177920
[1590446.417] (II) VIVANTE(0): hardware: DISP3 BG (video memory: 8162kB)
[1590446.427] (II) VIVANTE(0): test Initializing EXA
[1590446.427] (II) VIVANTE(0): (driver build from: -dirty)
[1590446.428] (II) EXA(0): Driver allocated offscreen pixmaps
[1590446.428] (II) EXA(0): Driver registered support for the following operations:
[1590446.428] (II) Solid
[1590446.428] (II) Copy
[1590446.428] (II) Composite (RENDER acceleration)
[1590446.428] (II) UploadToScreen
[1590446.429] (EE)
[1590446.429] (EE) Backtrace:
[1590446.429] (EE)
[1590446.429] (EE) Segmentation fault at address 0xe0
[1590446.429] (EE)
Fatal server error:
[1590446.430] (EE) Caught signal 11 (Segmentation fault). Server aborting
[1590446.430] (EE)
[1590446.430] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[1590446.430] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[1590446.430] (EE)
[1590446.452] (EE) Server terminated with error (1). Closing log file.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [meta-fsl-arm-extra] kernel update for SabreLite?
2015-02-06 12:15 [meta-fsl-arm-extra] kernel update for SabreLite? Gary Thomas
@ 2015-02-06 12:21 ` Otavio Salvador
0 siblings, 0 replies; 2+ messages in thread
From: Otavio Salvador @ 2015-02-06 12:21 UTC (permalink / raw)
To: Gary Thomas; +Cc: meta-freescale@yoctoproject.org
Hello Gary,
On Fri, Feb 6, 2015 at 10:15 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> A fresh (yesterday) build for the Nitrogen6x (SabreLite)
> can no longer run X, due to a mismatch of kernel (3.10.31)
> and video components (3.10.53).
>
> I built with these repositories:
> meta-fsl-arm = "master:95e0861135ffa5f42828d9419788b3db9946861f"
> meta-fsl-arm-extra = "master:9c3dc2a63f637319d877e8fecba3ed7197f44d43"
>
> The failing X server log is attached.
>
> The relevant packages are:
> firmware-imx-vpu-imx6d - 1:3.10.53-1.1.0-r0.0
> firmware-imx-vpu-imx6q - 1:3.10.53-1.1.0-r0.0
> imx-lib - 1:3.10.53-1.1.0-r0.0
> kernel-3.10.31-1.1.0-beta+yocto - 3.10.31-r0.19
> xf86-video-imxfb-vivante - 3:3.10.53-1.1.0-r0.0
>
> 'kernel' came from meta-fsl-arm-extra/linux-boundary
Thanks for reporting this. Indeed all boards using 3.10.31 are now
failing due GPU mismatch. I hope the vendors update the kernel soon.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-02-06 12:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-06 12:15 [meta-fsl-arm-extra] kernel update for SabreLite? Gary Thomas
2015-02-06 12:21 ` Otavio Salvador
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.