From: Corey Minyard <minyard@acm.org>
To: lkp@lists.01.org
Subject: Re: [ipmi] d9b7e4f717a: +52.5% turbostat.%Busy
Date: Thu, 12 Feb 2015 16:50:49 -0600 [thread overview]
Message-ID: <54DD2E49.9070402@acm.org> (raw)
In-Reply-To: <1423627517.8112.0.camel@intel.com>
[-- Attachment #1: Type: text/plain, Size: 2846 bytes --]
I'm not quite sure how to interpret this data, but I'm assuming that
with the periodic checks it's waking up a lot more than it used to.
I'm not sure why this is the case, but it depends on what userland
software is doing with the driver. I'll try to reproduce and see what I
can find.
-corey
On 02/10/2015 10:05 PM, Huang Ying wrote:
> FYI, we noticed the below changes on
>
> commit d9b7e4f717a167610a49ceb9e5969e80146c89a8 ("ipmi: Periodically check to see if irqs and messages are set right")
>
> testbox/testcase/testparams: avoton3/idle/performance-10m
>
> 6a11e5c67a397e9a d9b7e4f717a167610a49ceb9e5
> ---------------- --------------------------
> %stddev %change %stddev
> \ | \
> 0.10 ± 0% +52.5% 0.15 ± 2% turbostat.%Busy
> 2 ± 0% +50.0% 3 ± 0% turbostat.Avg_MHz
>
> turbostat.%Busy
>
> 0.2 ++----O-O------------------------------------------------------------+
> | |
> 0.18 ++ |
> | |
> | |
> 0.16 ++ O O O O O O O O O O O O O O |
> O O O O O O O O |
> 0.14 ++ |
> | |
> 0.12 ++ *.* * |
> | .. + : + |
> | .* + : + |
> 0.1 *+ *.. .*.*.. .*..* *..*..*.*..*..*..*.*..*..*..*.*..*..*
> | *. *. |
> 0.08 ++-------------------------------------------------------------------+
>
>
> [*] bisect-good sample
> [O] bisect-bad sample
>
> To reproduce:
>
> apt-get install ruby ruby-oj
> git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
> cd lkp-tests
> bin/setup-local job.yaml # the job file attached in this email
> bin/run-local job.yaml
>
> Disclaimer:
> Results have been estimated based on internal Intel analysis and are provided
> for informational purposes only. Any difference in system hardware or software
> design or configuration may affect actual performance.
>
>
>
>
> _______________________________________________
> LKP mailing list
> LKP(a)linux.intel.com
>
WARNING: multiple messages have this Message-ID (diff)
From: Corey Minyard <minyard@acm.org>
To: Huang Ying <ying.huang@intel.com>, Corey Minyard <cminyard@mvista.com>
Cc: LKML <linux-kernel@vger.kernel.org>, LKP ML <lkp@01.org>
Subject: Re: [LKP] [ipmi] d9b7e4f717a: +52.5% turbostat.%Busy
Date: Thu, 12 Feb 2015 16:50:49 -0600 [thread overview]
Message-ID: <54DD2E49.9070402@acm.org> (raw)
In-Reply-To: <1423627517.8112.0.camel@intel.com>
I'm not quite sure how to interpret this data, but I'm assuming that
with the periodic checks it's waking up a lot more than it used to.
I'm not sure why this is the case, but it depends on what userland
software is doing with the driver. I'll try to reproduce and see what I
can find.
-corey
On 02/10/2015 10:05 PM, Huang Ying wrote:
> FYI, we noticed the below changes on
>
> commit d9b7e4f717a167610a49ceb9e5969e80146c89a8 ("ipmi: Periodically check to see if irqs and messages are set right")
>
> testbox/testcase/testparams: avoton3/idle/performance-10m
>
> 6a11e5c67a397e9a d9b7e4f717a167610a49ceb9e5
> ---------------- --------------------------
> %stddev %change %stddev
> \ | \
> 0.10 ± 0% +52.5% 0.15 ± 2% turbostat.%Busy
> 2 ± 0% +50.0% 3 ± 0% turbostat.Avg_MHz
>
> turbostat.%Busy
>
> 0.2 ++----O-O------------------------------------------------------------+
> | |
> 0.18 ++ |
> | |
> | |
> 0.16 ++ O O O O O O O O O O O O O O |
> O O O O O O O O |
> 0.14 ++ |
> | |
> 0.12 ++ *.* * |
> | .. + : + |
> | .* + : + |
> 0.1 *+ *.. .*.*.. .*..* *..*..*.*..*..*..*.*..*..*..*.*..*..*
> | *. *. |
> 0.08 ++-------------------------------------------------------------------+
>
>
> [*] bisect-good sample
> [O] bisect-bad sample
>
> To reproduce:
>
> apt-get install ruby ruby-oj
> git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
> cd lkp-tests
> bin/setup-local job.yaml # the job file attached in this email
> bin/run-local job.yaml
>
> Disclaimer:
> Results have been estimated based on internal Intel analysis and are provided
> for informational purposes only. Any difference in system hardware or software
> design or configuration may affect actual performance.
>
>
>
>
> _______________________________________________
> LKP mailing list
> LKP@linux.intel.com
>
next prev parent reply other threads:[~2015-02-12 22:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-11 4:05 [ipmi] d9b7e4f717a: +52.5% turbostat.%Busy Huang Ying
2015-02-11 4:05 ` [LKP] " Huang Ying
2015-02-12 22:50 ` Corey Minyard [this message]
2015-02-12 22:50 ` Corey Minyard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54DD2E49.9070402@acm.org \
--to=minyard@acm.org \
--cc=lkp@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.