[PATCH v10 0/2] ns, procfs: pid conversion between ns

[PATCH v10 0/2] ns, procfs: pid conversion between ns

[Chen Hanxiao]

Chen Hanxiao (1):
  /proc/PID/status: show all sets of pid according to ns

Nathan Scott (1):
  docs: add missing and new /proc/PID/status file entries, fix typos

 Documentation/filesystems/proc.txt | 11 ++++++++---
 fs/proc/array.c                    | 16 ++++++++++++++++
 2 files changed, 24 insertions(+), 3 deletions(-)

-- 
2.1.0

[PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries, fix typos

[Chen Hanxiao]

From: Nathan Scott <nathans@redhat.com>

From: Nathan Scott <nathans@redhat.com>

docs: add missing and new /proc/PID/status file entries, fix typos

Signed-off-by: Nathan Scott <nathans@redhat.com>
---
 Documentation/filesystems/proc.txt | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index aae9dd1..457cebd 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -197,12 +197,12 @@ contains details information about the process itself.  Its fields are
 explained in Table 1-4.
 
 (for SMP CONFIG users)
-For making accounting scalable, RSS related information are handled in
-asynchronous manner and the vaule may not be very precise. To see a precise
+For making accounting scalable, RSS related information are handled in an
+asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 2.6.30-rc7)
+Table 1-2: Contents of the status files (as of 3.20.0)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
@@ -210,6 +210,7 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7)
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
  Tgid                        thread group ID
+ Ngid                        NUMA group ID (0 if none)
  Pid                         process id
  PPid                        process id of the parent process
  TracerPid                   PID of process tracing this process (0 if not)
@@ -217,6 +218,10 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7)
  Gid                         Real, effective, saved set, and  file system GIDs
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
+ NStgid                      descendant namespace thread group ID hierarchy
+ NSpid                       descendant namespace process ID hierarchy
+ NSpgid                      descendant namespace process group ID hierarchy
+ NSsid                       descendant namespace session ID hierarchy
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
-- 
2.1.0

Re: [PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries, fix typos

[Andrew Morton]

On Fri, 6 Feb 2015 18:45:50 +0800 Chen Hanxiao <chenhanxiao-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org> wrote:

> From: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> 
> From: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> 
> docs: add missing and new /proc/PID/status file entries, fix typos
> 
> Signed-off-by: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

This should have had your signoff, because you were on the patch
delivery path (Documentation/SubmittingPatches section 11 has details).

I have made that change to my copy of this patch.

Re: [PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries, fix typos

[Andrew Morton]

On Fri, 6 Feb 2015 18:45:50 +0800 Chen Hanxiao <chenhanxiao@cn.fujitsu.com> wrote:

> From: Nathan Scott <nathans@redhat.com>
> 
> From: Nathan Scott <nathans@redhat.com>
> 
> docs: add missing and new /proc/PID/status file entries, fix typos
> 
> Signed-off-by: Nathan Scott <nathans@redhat.com>

This should have had your signoff, because you were on the patch
delivery path (Documentation/SubmittingPatches section 11 has details).

I have made that change to my copy of this patch.

RE: [PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries, fix typos

[Chen, Hanxiao]

> -----Original Message-----
> From: Andrew Morton [mailto:akpm@linux-foundation.org]
> Sent: Tuesday, February 24, 2015 5:02 AM
> To: Chen, Hanxiao/陈 晗霄
> Cc: Eric W. Biederman; containers@lists.linux-foundation.org;
> linux-kernel@vger.kernel.org; linux-doc@vger.kernel.org; Serge Hallyn; Jonathan
> Corbet; Gui, Jianfeng/归 剑峰; Nathan Scott
> Subject: Re: [PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries,
> fix typos
> 
> On Fri, 6 Feb 2015 18:45:50 +0800 Chen Hanxiao <chenhanxiao@cn.fujitsu.com> wrote:
> 
> > From: Nathan Scott <nathans@redhat.com>
> >
> > From: Nathan Scott <nathans@redhat.com>
> >
> > docs: add missing and new /proc/PID/status file entries, fix typos
> >
> > Signed-off-by: Nathan Scott <nathans@redhat.com>
> 
> This should have had your signoff, because you were on the patch
> delivery path (Documentation/SubmittingPatches section 11 has details).
> 
> I have made that change to my copy of this patch.

Hi,

Thanks for your help.
I'll be more careful next time.

Thank you very much.

Regards,
- Chen
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/containers

RE: [PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries, fix typos

[Chen, Hanxiao]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1224 bytes --]



> -----Original Message-----
> From: Andrew Morton [mailto:akpm@linux-foundation.org]
> Sent: Tuesday, February 24, 2015 5:02 AM
> To: Chen, Hanxiao/³Â êÏÏö
> Cc: Eric W. Biederman; containers@lists.linux-foundation.org;
> linux-kernel@vger.kernel.org; linux-doc@vger.kernel.org; Serge Hallyn; Jonathan
> Corbet; Gui, Jianfeng/¹é ½£·å; Nathan Scott
> Subject: Re: [PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries,
> fix typos
> 
> On Fri, 6 Feb 2015 18:45:50 +0800 Chen Hanxiao <chenhanxiao@cn.fujitsu.com> wrote:
> 
> > From: Nathan Scott <nathans@redhat.com>
> >
> > From: Nathan Scott <nathans@redhat.com>
> >
> > docs: add missing and new /proc/PID/status file entries, fix typos
> >
> > Signed-off-by: Nathan Scott <nathans@redhat.com>
> 
> This should have had your signoff, because you were on the patch
> delivery path (Documentation/SubmittingPatches section 11 has details).
> 
> I have made that change to my copy of this patch.

Hi,

Thanks for your help.
I'll be more careful next time.

Thank you very much.

Regards,
- Chen
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

RE: [PATCH v10 0/2] ns, procfs: pid conversion between ns

[Chen, Hanxiao]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1045 bytes --]



> -----Original Message-----
> From: containers-bounces@lists.linux-foundation.org
> [mailto:containers-bounces@lists.linux-foundation.org] On Behalf Of Chen Hanxiao
> Sent: Friday, February 06, 2015 6:46 PM
> To: Eric W. Biederman; Andrew Morton
> Cc: Jonathan Corbet; containers@lists.linux-foundation.org; Serge Hallyn;
> linux-doc@vger.kernel.org; linux-kernel@vger.kernel.org; Nathan Scott
> Subject: [PATCH v10 0/2] ns, procfs: pid conversion between ns
> 
> 
> Chen Hanxiao (1):
>   /proc/PID/status: show all sets of pid according to ns
> 
> Nathan Scott (1):
>   docs: add missing and new /proc/PID/status file entries, fix typos
> 
>  Documentation/filesystems/proc.txt | 11 ++++++++---
>  fs/proc/array.c                    | 16 ++++++++++++++++
>  2 files changed, 24 insertions(+), 3 deletions(-)
> 

Hi Eric,

Could please pick this series up for 3.20?

Thanks,
- Chen
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

RE: [PATCH v10 0/2] ns, procfs: pid conversion between ns

[Chen, Hanxiao]

> -----Original Message-----
> From: Chen, Hanxiao/陈 晗霄
> Sent: Wednesday, February 11, 2015 1:52 PM
> 
> > -----Original Message-----
> > From: containers-bounces@lists.linux-foundation.org
> >
> > Chen Hanxiao (1):
> >   /proc/PID/status: show all sets of pid according to ns
> >
> > Nathan Scott (1):
> >   docs: add missing and new /proc/PID/status file entries, fix typos
> >
> >  Documentation/filesystems/proc.txt | 11 ++++++++---
> >  fs/proc/array.c                    | 16 ++++++++++++++++
> >  2 files changed, 24 insertions(+), 3 deletions(-)
> >
> 
> Hi Eric,
> 
> Could please pick this series up for 3.20?
> 

Hi Andrew,

Since the patch is already Acked by Eric, Serge and Tested by Serge and Nathan.
Would you please take this series for 3.20? 

It's already half a year since we posted the patch for the first time,
and rebased several times. That's really frustrating.
We hope this patch can be merged in this cycle.

Thanks,
- Chen

_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/containers

RE: [PATCH v10 0/2] ns, procfs: pid conversion between ns

[Chen, Hanxiao]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1118 bytes --]



> -----Original Message-----
> From: Chen, Hanxiao/³Â êÏÏö
> Sent: Wednesday, February 11, 2015 1:52 PM
> 
> > -----Original Message-----
> > From: containers-bounces@lists.linux-foundation.org
> >
> > Chen Hanxiao (1):
> >   /proc/PID/status: show all sets of pid according to ns
> >
> > Nathan Scott (1):
> >   docs: add missing and new /proc/PID/status file entries, fix typos
> >
> >  Documentation/filesystems/proc.txt | 11 ++++++++---
> >  fs/proc/array.c                    | 16 ++++++++++++++++
> >  2 files changed, 24 insertions(+), 3 deletions(-)
> >
> 
> Hi Eric,
> 
> Could please pick this series up for 3.20?
> 

Hi Andrew,

Since the patch is already Acked by Eric, Serge and Tested by Serge and Nathan.
Would you please take this series for 3.20? 

It's already half a year since we posted the patch for the first time,
and rebased several times. That's really frustrating.
We hope this patch can be merged in this cycle.

Thanks,
- Chen

ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [PATCH v10 0/2] ns, procfs: pid conversion between ns

["Gui, Jianfeng/归 剑峰"]

在 2015/2/12 9:35, Chen, Hanxiao/陈 晗霄 写道:
>
>
>> -----Original Message-----
>> From: Chen, Hanxiao/陈 晗霄
>> Sent: Wednesday, February 11, 2015 1:52 PM
>>
>>> -----Original Message-----
>>> From: containers-bounces@lists.linux-foundation.org
>>>
>>> Chen Hanxiao (1):
>>>    /proc/PID/status: show all sets of pid according to ns
>>>
>>> Nathan Scott (1):
>>>    docs: add missing and new /proc/PID/status file entries, fix typos
>>>
>>>   Documentation/filesystems/proc.txt | 11 ++++++++---
>>>   fs/proc/array.c                    | 16 ++++++++++++++++
>>>   2 files changed, 24 insertions(+), 3 deletions(-)
>>>
>>
>> Hi Eric,
>>
>> Could please pick this series up for 3.20?
>>
>
> Hi Andrew,
>
> Since the patch is already Acked by Eric, Serge and Tested by Serge and Nathan.
> Would you please take this series for 3.20?
>
> It's already half a year since we posted the patch for the first time,
> and rebased several times. That's really frustrating.
> We hope this patch can be merged in this cycle.

Andrew?   Eric?

Thanks,
Gui

Re: [PATCH v10 0/2] ns, procfs: pid conversion between ns

["Gui, Jianfeng/归 剑峰"]

在 2015/2/12 9:35, Chen, Hanxiao/陈 晗霄 写道:
>
>
>> -----Original Message-----
>> From: Chen, Hanxiao/陈 晗霄
>> Sent: Wednesday, February 11, 2015 1:52 PM
>>
>>> -----Original Message-----
>>> From: containers-bounces@lists.linux-foundation.org
>>>
>>> Chen Hanxiao (1):
>>>    /proc/PID/status: show all sets of pid according to ns
>>>
>>> Nathan Scott (1):
>>>    docs: add missing and new /proc/PID/status file entries, fix typos
>>>
>>>   Documentation/filesystems/proc.txt | 11 ++++++++---
>>>   fs/proc/array.c                    | 16 ++++++++++++++++
>>>   2 files changed, 24 insertions(+), 3 deletions(-)
>>>
>>
>> Hi Eric,
>>
>> Could please pick this series up for 3.20?
>>
>
> Hi Andrew,
>
> Since the patch is already Acked by Eric, Serge and Tested by Serge and Nathan.
> Would you please take this series for 3.20?
>
> It's already half a year since we posted the patch for the first time,
> and rebased several times. That's really frustrating.
> We hope this patch can be merged in this cycle.

Andrew?   Eric?

Thanks,
Gui
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/containers

[PATCH v10 1/2] /proc/PID/status: show all sets of pid according to ns

[Chen Hanxiao]

If some issues occurred inside a container guest, host user
could not know which process is in trouble just by guest pid:
the users of container guest only knew the pid inside containers.
This will bring obstacle for trouble shooting.

This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:
a) In init_pid_ns, nothing changed;

b) In one pidns, will tell the pid inside containers:
  NStgid: 21776   5       1
  NSpid:  21776   5       1
  NSpgid: 21776   5       1
  NSsid:  21729   1       0
  ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.

c) If pidns is nested, it depends on which pidns are you in.
  NStgid: 5       1
  NSpid:  5       1
  NSpgid: 5       1
  NSsid:  1       0
  ** Views from level 1

Acked-by: Serge Hallyn <serge.hallyn-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Acked-by: "Eric W. Biederman" <ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org>

Tested-by: Serge Hallyn <serge.hallyn-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Tested-by: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

Signed-off-by: Chen Hanxiao <chenhanxiao-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
---
v10: remove trailing space of pid numbers "\t%d " -> "\t%d",
     rebased on 3.19-rc7
v9: rebased on 3.19-rc1
No change from v4-v8
v3: add another two fielsd: NSpgid and NSsid.
v2: add two new fields: NStgid and NSpid.
    keep fields of Tgid and Pid unchanged for back compatibility.

 fs/proc/array.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/fs/proc/array.c b/fs/proc/array.c
index bd117d0..f3e6d76 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -208,6 +208,22 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
 			   from_kgid_munged(user_ns, GROUP_AT(group_info, g)));
 	put_cred(cred);
 
+	seq_puts(m, "\nNStgid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_tgid_nr_ns(p, pid->numbers[g].ns));
+	seq_puts(m, "\nNSpid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_pid_nr_ns(p, pid->numbers[g].ns));
+	seq_puts(m, "\nNSpgid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_pgrp_nr_ns(p, pid->numbers[g].ns));
+	seq_puts(m, "\nNSsid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_session_nr_ns(p, pid->numbers[g].ns));
 	seq_putc(m, '\n');
 }
 
-- 
2.1.0

[PATCH v10 1/2] /proc/PID/status: show all sets of pid according to ns

[Chen Hanxiao]

If some issues occurred inside a container guest, host user
could not know which process is in trouble just by guest pid:
the users of container guest only knew the pid inside containers.
This will bring obstacle for trouble shooting.

This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:
a) In init_pid_ns, nothing changed;

b) In one pidns, will tell the pid inside containers:
  NStgid: 21776   5       1
  NSpid:  21776   5       1
  NSpgid: 21776   5       1
  NSsid:  21729   1       0
  ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.

c) If pidns is nested, it depends on which pidns are you in.
  NStgid: 5       1
  NSpid:  5       1
  NSpgid: 5       1
  NSsid:  1       0
  ** Views from level 1

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

Tested-by: Serge Hallyn <serge.hallyn@canonical.com>
Tested-by: Nathan Scott <nathans@redhat.com>

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
---
v10: remove trailing space of pid numbers "\t%d " -> "\t%d",
     rebased on 3.19-rc7
v9: rebased on 3.19-rc1
No change from v4-v8
v3: add another two fielsd: NSpgid and NSsid.
v2: add two new fields: NStgid and NSpid.
    keep fields of Tgid and Pid unchanged for back compatibility.

 fs/proc/array.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/fs/proc/array.c b/fs/proc/array.c
index bd117d0..f3e6d76 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -208,6 +208,22 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
 			   from_kgid_munged(user_ns, GROUP_AT(group_info, g)));
 	put_cred(cred);
 
+	seq_puts(m, "\nNStgid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_tgid_nr_ns(p, pid->numbers[g].ns));
+	seq_puts(m, "\nNSpid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_pid_nr_ns(p, pid->numbers[g].ns));
+	seq_puts(m, "\nNSpgid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_pgrp_nr_ns(p, pid->numbers[g].ns));
+	seq_puts(m, "\nNSsid:");
+	for (g = ns->level; g <= pid->level; g++)
+		seq_printf(m, "\t%d",
+			task_session_nr_ns(p, pid->numbers[g].ns));
 	seq_putc(m, '\n');
 }
 
-- 
2.1.0

Re: [PATCH v10 1/2] /proc/PID/status: show all sets of pid according to ns

[Andrew Morton]

On Fri, 6 Feb 2015 18:45:49 +0800 Chen Hanxiao <chenhanxiao-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org> wrote:

> If some issues occurred inside a container guest, host user
> could not know which process is in trouble just by guest pid:
> the users of container guest only knew the pid inside containers.
> This will bring obstacle for trouble shooting.
> 
> This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:
> a) In init_pid_ns, nothing changed;
> 
> b) In one pidns, will tell the pid inside containers:
>   NStgid: 21776   5       1
>   NSpid:  21776   5       1
>   NSpgid: 21776   5       1
>   NSsid:  21729   1       0
>   ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.
> 
> c) If pidns is nested, it depends on which pidns are you in.
>   NStgid: 5       1
>   NSpid:  5       1
>   NSpgid: 5       1
>   NSsid:  1       0
>   ** Views from level 1
> 
> ...
>
> --- a/fs/proc/array.c
> +++ b/fs/proc/array.c
> @@ -208,6 +208,22 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
>  			   from_kgid_munged(user_ns, GROUP_AT(group_info, g)));
>  	put_cred(cred);
>  
> +	seq_puts(m, "\nNStgid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_tgid_nr_ns(p, pid->numbers[g].ns));
> +	seq_puts(m, "\nNSpid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_pid_nr_ns(p, pid->numbers[g].ns));
> +	seq_puts(m, "\nNSpgid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_pgrp_nr_ns(p, pid->numbers[g].ns));
> +	seq_puts(m, "\nNSsid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_session_nr_ns(p, pid->numbers[g].ns));
>  	seq_putc(m, '\n');
>  }

Is there any point in including this code if CONFIG_USER_NS=n?

Re: [PATCH v10 1/2] /proc/PID/status: show all sets of pid according to ns

[Andrew Morton]

On Fri, 6 Feb 2015 18:45:49 +0800 Chen Hanxiao <chenhanxiao@cn.fujitsu.com> wrote:

> If some issues occurred inside a container guest, host user
> could not know which process is in trouble just by guest pid:
> the users of container guest only knew the pid inside containers.
> This will bring obstacle for trouble shooting.
> 
> This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:
> a) In init_pid_ns, nothing changed;
> 
> b) In one pidns, will tell the pid inside containers:
>   NStgid: 21776   5       1
>   NSpid:  21776   5       1
>   NSpgid: 21776   5       1
>   NSsid:  21729   1       0
>   ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.
> 
> c) If pidns is nested, it depends on which pidns are you in.
>   NStgid: 5       1
>   NSpid:  5       1
>   NSpgid: 5       1
>   NSsid:  1       0
>   ** Views from level 1
> 
> ...
>
> --- a/fs/proc/array.c
> +++ b/fs/proc/array.c
> @@ -208,6 +208,22 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
>  			   from_kgid_munged(user_ns, GROUP_AT(group_info, g)));
>  	put_cred(cred);
>  
> +	seq_puts(m, "\nNStgid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_tgid_nr_ns(p, pid->numbers[g].ns));
> +	seq_puts(m, "\nNSpid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_pid_nr_ns(p, pid->numbers[g].ns));
> +	seq_puts(m, "\nNSpgid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_pgrp_nr_ns(p, pid->numbers[g].ns));
> +	seq_puts(m, "\nNSsid:");
> +	for (g = ns->level; g <= pid->level; g++)
> +		seq_printf(m, "\t%d",
> +			task_session_nr_ns(p, pid->numbers[g].ns));
>  	seq_putc(m, '\n');
>  }

Is there any point in including this code if CONFIG_USER_NS=n?

Re: [PATCH v10 1/2] /proc/PID/status: show all sets of pid according to ns

[Serge E. Hallyn]

On Mon, Feb 23, 2015 at 01:00:09PM -0800, Andrew Morton wrote:
> On Fri, 6 Feb 2015 18:45:49 +0800 Chen Hanxiao <chenhanxiao-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org> wrote:
> 
> > If some issues occurred inside a container guest, host user
> > could not know which process is in trouble just by guest pid:
> > the users of container guest only knew the pid inside containers.
> > This will bring obstacle for trouble shooting.
> > 
> > This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:
> > a) In init_pid_ns, nothing changed;
> > 
> > b) In one pidns, will tell the pid inside containers:
> >   NStgid: 21776   5       1
> >   NSpid:  21776   5       1
> >   NSpgid: 21776   5       1
> >   NSsid:  21729   1       0
> >   ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.
> > 
> > c) If pidns is nested, it depends on which pidns are you in.
> >   NStgid: 5       1
> >   NSpid:  5       1
> >   NSpgid: 5       1
> >   NSsid:  1       0
> >   ** Views from level 1
> > 
> > ...
> >
> > --- a/fs/proc/array.c
> > +++ b/fs/proc/array.c
> > @@ -208,6 +208,22 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
> >  			   from_kgid_munged(user_ns, GROUP_AT(group_info, g)));
> >  	put_cred(cred);
> >  
> > +	seq_puts(m, "\nNStgid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_tgid_nr_ns(p, pid->numbers[g].ns));
> > +	seq_puts(m, "\nNSpid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_pid_nr_ns(p, pid->numbers[g].ns));
> > +	seq_puts(m, "\nNSpgid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_pgrp_nr_ns(p, pid->numbers[g].ns));
> > +	seq_puts(m, "\nNSsid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_session_nr_ns(p, pid->numbers[g].ns));
> >  	seq_putc(m, '\n');
> >  }
> 
> Is there any point in including this code if CONFIG_USER_NS=n?

Not if CONFIG_PID_NS=n, no

Re: [PATCH v10 1/2] /proc/PID/status: show all sets of pid according to ns

[Serge E. Hallyn]

On Mon, Feb 23, 2015 at 01:00:09PM -0800, Andrew Morton wrote:
> On Fri, 6 Feb 2015 18:45:49 +0800 Chen Hanxiao <chenhanxiao@cn.fujitsu.com> wrote:
> 
> > If some issues occurred inside a container guest, host user
> > could not know which process is in trouble just by guest pid:
> > the users of container guest only knew the pid inside containers.
> > This will bring obstacle for trouble shooting.
> > 
> > This patch adds four fields: NStgid, NSpid, NSpgid and NSsid:
> > a) In init_pid_ns, nothing changed;
> > 
> > b) In one pidns, will tell the pid inside containers:
> >   NStgid: 21776   5       1
> >   NSpid:  21776   5       1
> >   NSpgid: 21776   5       1
> >   NSsid:  21729   1       0
> >   ** Process id is 21776 in level 0, 5 in level 1, 1 in level 2.
> > 
> > c) If pidns is nested, it depends on which pidns are you in.
> >   NStgid: 5       1
> >   NSpid:  5       1
> >   NSpgid: 5       1
> >   NSsid:  1       0
> >   ** Views from level 1
> > 
> > ...
> >
> > --- a/fs/proc/array.c
> > +++ b/fs/proc/array.c
> > @@ -208,6 +208,22 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
> >  			   from_kgid_munged(user_ns, GROUP_AT(group_info, g)));
> >  	put_cred(cred);
> >  
> > +	seq_puts(m, "\nNStgid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_tgid_nr_ns(p, pid->numbers[g].ns));
> > +	seq_puts(m, "\nNSpid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_pid_nr_ns(p, pid->numbers[g].ns));
> > +	seq_puts(m, "\nNSpgid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_pgrp_nr_ns(p, pid->numbers[g].ns));
> > +	seq_puts(m, "\nNSsid:");
> > +	for (g = ns->level; g <= pid->level; g++)
> > +		seq_printf(m, "\t%d",
> > +			task_session_nr_ns(p, pid->numbers[g].ns));
> >  	seq_putc(m, '\n');
> >  }
> 
> Is there any point in including this code if CONFIG_USER_NS=n?

Not if CONFIG_PID_NS=n, no

[PATCH v10 2/2] docs: add missing and new /proc/PID/status file entries, fix typos

[Chen Hanxiao]

From: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

From: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

docs: add missing and new /proc/PID/status file entries, fix typos

Signed-off-by: Nathan Scott <nathans-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 Documentation/filesystems/proc.txt | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index aae9dd1..457cebd 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -197,12 +197,12 @@ contains details information about the process itself.  Its fields are
 explained in Table 1-4.
 
 (for SMP CONFIG users)
-For making accounting scalable, RSS related information are handled in
-asynchronous manner and the vaule may not be very precise. To see a precise
+For making accounting scalable, RSS related information are handled in an
+asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 2.6.30-rc7)
+Table 1-2: Contents of the status files (as of 3.20.0)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
@@ -210,6 +210,7 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7)
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
  Tgid                        thread group ID
+ Ngid                        NUMA group ID (0 if none)
  Pid                         process id
  PPid                        process id of the parent process
  TracerPid                   PID of process tracing this process (0 if not)
@@ -217,6 +218,10 @@ Table 1-2: Contents of the status files (as of 2.6.30-rc7)
  Gid                         Real, effective, saved set, and  file system GIDs
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
+ NStgid                      descendant namespace thread group ID hierarchy
+ NSpid                       descendant namespace process ID hierarchy
+ NSpgid                      descendant namespace process group ID hierarchy
+ NSsid                       descendant namespace session ID hierarchy
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
-- 
2.1.0

RE: [PATCH v10 0/2] ns, procfs: pid conversion between ns

[Chen, Hanxiao]

> -----Original Message-----
> From: containers-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> [mailto:containers-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org] On Behalf Of Chen Hanxiao
> Sent: Friday, February 06, 2015 6:46 PM
> To: Eric W. Biederman; Andrew Morton
> Cc: Jonathan Corbet; containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; Serge Hallyn;
> linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Nathan Scott
> Subject: [PATCH v10 0/2] ns, procfs: pid conversion between ns
> 
> 
> Chen Hanxiao (1):
>   /proc/PID/status: show all sets of pid according to ns
> 
> Nathan Scott (1):
>   docs: add missing and new /proc/PID/status file entries, fix typos
> 
>  Documentation/filesystems/proc.txt | 11 ++++++++---
>  fs/proc/array.c                    | 16 ++++++++++++++++
>  2 files changed, 24 insertions(+), 3 deletions(-)
> 

Hi Eric,

Could please pick this series up for 3.20?

Thanks,
- Chen

[PATCH v10 0/2] ns, procfs: pid conversion between ns

[Chen Hanxiao]

Chen Hanxiao (1):
  /proc/PID/status: show all sets of pid according to ns

Nathan Scott (1):
  docs: add missing and new /proc/PID/status file entries, fix typos

 Documentation/filesystems/proc.txt | 11 ++++++++---
 fs/proc/array.c                    | 16 ++++++++++++++++
 2 files changed, 24 insertions(+), 3 deletions(-)

-- 
2.1.0