[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

Hello.

   Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
patch reposted today in order to work.

[1/3] ARM: shmobile: r8a7791: add CAN clocks
[2/3] ARM: shmobile: r8a7791: add CAN DT support
[3/3] ARM: shmobile: henninger: add CAN0 DT support

WBR, Sergei

[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

Hello.

   Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
patch reposted today in order to work.

[1/3] ARM: shmobile: r8a7791: add CAN clocks
[2/3] ARM: shmobile: r8a7791: add CAN DT support
[3/3] ARM: shmobile: henninger: add CAN0 DT support

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

Hello.

   Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
patch reposted today in order to work.

[1/3] ARM: shmobile: r8a7791: add CAN clocks
[2/3] ARM: shmobile: r8a7791: add CAN DT support
[3/3] ARM: shmobile: henninger: add CAN0 DT support

WBR, Sergei

[PATCH v5 1/3] ARM: shmobile: r8a7791: add CAN clocks

[Sergei Shtylyov]

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 5:
- fixed spelling in the comment to the CAN_CLK node;
- added Geert's ACK.

Changes in version 4:
- refreshed the patch.

Changes in version 3:
- new patch.

 arch/arm/boot/dts/r8a7791.dtsi            |   23 +++++++++++++++++++++--
 include/dt-bindings/clock/r8a7791-clock.h |    1 +
 2 files changed, 22 insertions(+), 2 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -862,15 +862,34 @@
 			status = "disabled";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7791-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan";
 		};
 
 		/* Variable factor clocks */
Index: renesas/include/dt-bindings/clock/r8a7791-clock.h
=================================--- renesas.orig/include/dt-bindings/clock/r8a7791-clock.h
+++ renesas/include/dt-bindings/clock/r8a7791-clock.h
@@ -20,6 +20,7 @@
 #define R8A7791_CLK_SDH			6
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
+#define R8A7791_CLK_RCAN		9
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0

[PATCH v5 1/3] ARM: shmobile: r8a7791: add CAN clocks

[Sergei Shtylyov]

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 5:
- fixed spelling in the comment to the CAN_CLK node;
- added Geert's ACK.

Changes in version 4:
- refreshed the patch.

Changes in version 3:
- new patch.

 arch/arm/boot/dts/r8a7791.dtsi            |   23 +++++++++++++++++++++--
 include/dt-bindings/clock/r8a7791-clock.h |    1 +
 2 files changed, 22 insertions(+), 2 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -862,15 +862,34 @@
 			status = "disabled";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7791-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan";
 		};
 
 		/* Variable factor clocks */
Index: renesas/include/dt-bindings/clock/r8a7791-clock.h
===================================================================
--- renesas.orig/include/dt-bindings/clock/r8a7791-clock.h
+++ renesas/include/dt-bindings/clock/r8a7791-clock.h
@@ -20,6 +20,7 @@
 #define R8A7791_CLK_SDH			6
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
+#define R8A7791_CLK_RCAN		9
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0

[PATCH v5 1/3] ARM: shmobile: r8a7791: add CAN clocks

[Sergei Shtylyov]

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 5:
- fixed spelling in the comment to the CAN_CLK node;
- added Geert's ACK.

Changes in version 4:
- refreshed the patch.

Changes in version 3:
- new patch.

 arch/arm/boot/dts/r8a7791.dtsi            |   23 +++++++++++++++++++++--
 include/dt-bindings/clock/r8a7791-clock.h |    1 +
 2 files changed, 22 insertions(+), 2 deletions(-)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -862,15 +862,34 @@
 			status = "disabled";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks at e6150000 {
 			compatible = "renesas,r8a7791-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan";
 		};
 
 		/* Variable factor clocks */
Index: renesas/include/dt-bindings/clock/r8a7791-clock.h
===================================================================
--- renesas.orig/include/dt-bindings/clock/r8a7791-clock.h
+++ renesas/include/dt-bindings/clock/r8a7791-clock.h
@@ -20,6 +20,7 @@
 #define R8A7791_CLK_SDH			6
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
+#define R8A7791_CLK_RCAN		9
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0

[PATCH v5 2/3] ARM: shmobile: r8a7791: add CAN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 5:
- fixed whitespace errors/warnings given by checkpatch.pl;
- added Geert's ACK.

Changes in version 4:
- refreshed the patch.

Changes in version 3:
- added 2 more CAN clocks along with "clock-names" property in the CAN0/1 device
  nodes;
- refreshed the patch.

Changes in version 2:
- fixed the "compatible" property in the CAN device nodes.

 arch/arm/boot/dts/r8a7791.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -816,6 +816,26 @@
 		};
 	};
 
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can@e6e88000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH v5 2/3] ARM: shmobile: r8a7791: add CAN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 5:
- fixed whitespace errors/warnings given by checkpatch.pl;
- added Geert's ACK.

Changes in version 4:
- refreshed the patch.

Changes in version 3:
- added 2 more CAN clocks along with "clock-names" property in the CAN0/1 device
  nodes;
- refreshed the patch.

Changes in version 2:
- fixed the "compatible" property in the CAN device nodes.

 arch/arm/boot/dts/r8a7791.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -816,6 +816,26 @@
 		};
 	};
 
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can@e6e88000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH v5 2/3] ARM: shmobile: r8a7791: add CAN DT support

[Sergei Shtylyov]

Define the generic R8A7791 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 5:
- fixed whitespace errors/warnings given by checkpatch.pl;
- added Geert's ACK.

Changes in version 4:
- refreshed the patch.

Changes in version 3:
- added 2 more CAN clocks along with "clock-names" property in the CAN0/1 device
  nodes;
- refreshed the patch.

Changes in version 2:
- fixed the "compatible" property in the CAN device nodes.

 arch/arm/boot/dts/r8a7791.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -816,6 +816,26 @@
 		};
 	};
 
+	can0: can at e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can at e6e88000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;

[PATCH v5 3/3] ARM: shmobile: henninger: add CAN0 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the CAN0 device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 4:
- refreshed the patch.

Changes in version 3:
- changed "can0_data_a" to "can0_data", removed "can_clk_d" in the
  "renesas,groups" property;
- moved CAN0 node to go after all others;
- refreshed the patch.

 arch/arm/boot/dts/r8a7791-henninger.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
=================================--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -147,6 +147,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -321,3 +326,9 @@
 		};
 	};
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

[PATCH v5 3/3] ARM: shmobile: henninger: add CAN0 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the CAN0 device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 4:
- refreshed the patch.

Changes in version 3:
- changed "can0_data_a" to "can0_data", removed "can_clk_d" in the
  "renesas,groups" property;
- moved CAN0 node to go after all others;
- refreshed the patch.

 arch/arm/boot/dts/r8a7791-henninger.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -147,6 +147,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -321,3 +326,9 @@
 		};
 	};
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

[PATCH v5 3/3] ARM: shmobile: henninger: add CAN0 DT support

[Sergei Shtylyov]

Define the Henninger board dependent part of the CAN0 device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 4:
- refreshed the patch.

Changes in version 3:
- changed "can0_data_a" to "can0_data", removed "can_clk_d" in the
  "renesas,groups" property;
- moved CAN0 node to go after all others;
- refreshed the patch.

 arch/arm/boot/dts/r8a7791-henninger.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -147,6 +147,11 @@
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -321,3 +326,9 @@
 		};
 	};
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

Re: [PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

On 01/06/2015 01:22 AM, Sergei Shtylyov wrote:

>     Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
> for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
> patch reposted today in order to work.

    Simon, now that this patch has been merged, could you merge the patchset too?

> [1/3] ARM: shmobile: r8a7791: add CAN clocks
> [2/3] ARM: shmobile: r8a7791: add CAN DT support
> [3/3] ARM: shmobile: henninger: add CAN0 DT support

WBR, Sergei

Re: [PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

On 01/06/2015 01:22 AM, Sergei Shtylyov wrote:

>     Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
> for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
> patch reposted today in order to work.

    Simon, now that this patch has been merged, could you merge the patchset too?

> [1/3] ARM: shmobile: r8a7791: add CAN clocks
> [2/3] ARM: shmobile: r8a7791: add CAN DT support
> [3/3] ARM: shmobile: henninger: add CAN0 DT support

WBR, Sergei

[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

On 01/06/2015 01:22 AM, Sergei Shtylyov wrote:

>     Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> 'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
> for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
> patch reposted today in order to work.

    Simon, now that this patch has been merged, could you merge the patchset too?

> [1/3] ARM: shmobile: r8a7791: add CAN clocks
> [2/3] ARM: shmobile: r8a7791: add CAN DT support
> [3/3] ARM: shmobile: henninger: add CAN0 DT support

WBR, Sergei

Re: [PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Simon Horman]

On Fri, Feb 20, 2015 at 12:44:26AM +0300, Sergei Shtylyov wrote:
> On 01/06/2015 01:22 AM, Sergei Shtylyov wrote:
> 
> >    Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> >'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
> >for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
> >patch reposted today in order to work.
> 
>    Simon, now that this patch has been merged, could you merge the patchset too?

Sure, I have queued them up as part of renesas-devel-20150219v2-v3.19

> >[1/3] ARM: shmobile: r8a7791: add CAN clocks
> >[2/3] ARM: shmobile: r8a7791: add CAN DT support
> >[3/3] ARM: shmobile: henninger: add CAN0 DT support
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Simon Horman]

On Fri, Feb 20, 2015 at 12:44:26AM +0300, Sergei Shtylyov wrote:
> On 01/06/2015 01:22 AM, Sergei Shtylyov wrote:
> 
> >    Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> >'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
> >for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
> >patch reposted today in order to work.
> 
>    Simon, now that this patch has been merged, could you merge the patchset too?

Sure, I have queued them up as part of renesas-devel-20150219v2-v3.19

> >[1/3] ARM: shmobile: r8a7791: add CAN clocks
> >[2/3] ARM: shmobile: r8a7791: add CAN DT support
> >[3/3] ARM: shmobile: henninger: add CAN0 DT support
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Simon Horman]

On Fri, Feb 20, 2015 at 12:44:26AM +0300, Sergei Shtylyov wrote:
> On 01/06/2015 01:22 AM, Sergei Shtylyov wrote:
> 
> >    Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
> >'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
> >for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
> >patch reposted today in order to work.
> 
>    Simon, now that this patch has been merged, could you merge the patchset too?

Sure, I have queued them up as part of renesas-devel-20150219v2-v3.19

> >[1/3] ARM: shmobile: r8a7791: add CAN clocks
> >[2/3] ARM: shmobile: r8a7791: add CAN DT support
> >[3/3] ARM: shmobile: henninger: add CAN0 DT support
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

On 02/20/2015 01:13 AM, Simon Horman wrote:

>>>     Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
>>> 'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
>>> for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
>>> patch reposted today in order to work.

>>     Simon, now that this patch has been merged, could you merge the patchset too?

> Sure, I have queued them up as part of renesas-devel-20150219v2-v3.19

    Thank you. Mike Turquette said he'd send a pull request soonish...

WBR, Sergei

Re: [PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

On 02/20/2015 01:13 AM, Simon Horman wrote:

>>>     Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
>>> 'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
>>> for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
>>> patch reposted today in order to work.

>>     Simon, now that this patch has been merged, could you merge the patchset too?

> Sure, I have queued them up as part of renesas-devel-20150219v2-v3.19

    Thank you. Mike Turquette said he'd send a pull request soonish...

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 0/3] Add R8A7791/Henninger board CAN DT support

[Sergei Shtylyov]

On 02/20/2015 01:13 AM, Simon Horman wrote:

>>>     Here's the set of 3 patches against Simon Horman's 'renesas.git' repo,
>>> 'renesas-devel-20141231-v3.19-rc2' tag. Here we add the CAN device tree support
>>> for the R8A7791-based Henninger board. It depends on the clk driver RCAN clock
>>> patch reposted today in order to work.

>>     Simon, now that this patch has been merged, could you merge the patchset too?

> Sure, I have queued them up as part of renesas-devel-20150219v2-v3.19

    Thank you. Mike Turquette said he'd send a pull request soonish...

WBR, Sergei