* CT firmware 10.1.467-13 is released.
@ 2015-02-21 17:31 Ben Greear
2015-02-21 17:50 ` Dave Taht
0 siblings, 1 reply; 3+ messages in thread
From: Ben Greear @ 2015-02-21 17:31 UTC (permalink / raw)
To: ath10k
Here are the highlights:
Add IBSS/AHDOC support.
Work-around tx-credits hang due to WMI/CE lockup in firmware (requires ath10k driver patches)
Attempt to fix a few asserts reported by users (scan code, rate-ctrl, resource-mgr, etc)
Known bugs:
CE transport failure assert (Only seen on IMX6 hardware at this time)
WMI keepalive failure, probably due to inability to send mgt frames in bad RF environment.
Downloads and more info is here:
http://www.candelatech.com/ath10k.php
As always, I am interested to hear of users having success or otherwise with
this firmware.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: CT firmware 10.1.467-13 is released.
2015-02-21 17:31 CT firmware 10.1.467-13 is released Ben Greear
@ 2015-02-21 17:50 ` Dave Taht
2015-02-21 18:17 ` Ben Greear
0 siblings, 1 reply; 3+ messages in thread
From: Dave Taht @ 2015-02-21 17:50 UTC (permalink / raw)
To: Ben Greear; +Cc: ath10k
On Sat, Feb 21, 2015 at 9:31 AM, Ben Greear <greearb@candelatech.com> wrote:
> Here are the highlights:
>
> Add IBSS/AHDOC support.
Awesome. Does this require the candela kernel patchset?
(am thinking of trying this version of the firmware on openwrt chaos
calmer on the tp-link archer C7 v2)
> Work-around tx-credits hang due to WMI/CE lockup in firmware (requires
> ath10k driver patches)
> Attempt to fix a few asserts reported by users (scan code, rate-ctrl,
> resource-mgr, etc)
>
> Known bugs:
> CE transport failure assert (Only seen on IMX6 hardware at this time)
> WMI keepalive failure, probably due to inability to send mgt frames in bad
> RF environment.
>
>
> Downloads and more info is here:
>
> http://www.candelatech.com/ath10k.php
>
> As always, I am interested to hear of users having success or otherwise with
> this firmware.
>
> Thanks,
> Ben
>
> --
> Ben Greear <greearb@candelatech.com>
> Candela Technologies Inc http://www.candelatech.com
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
--
Dave Täht
thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: CT firmware 10.1.467-13 is released.
2015-02-21 17:50 ` Dave Taht
@ 2015-02-21 18:17 ` Ben Greear
0 siblings, 0 replies; 3+ messages in thread
From: Ben Greear @ 2015-02-21 18:17 UTC (permalink / raw)
To: Dave Taht; +Cc: ath10k
On 02/21/2015 09:50 AM, Dave Taht wrote:
> On Sat, Feb 21, 2015 at 9:31 AM, Ben Greear <greearb@candelatech.com> wrote:
>> Here are the highlights:
>>
>> Add IBSS/AHDOC support.
>
> Awesome. Does this require the candela kernel patchset?
I think upstream has support, but if you want any decent throughput (HT, VHT)
you have to be running bleeding edge kernels and hostapd
(not sure all patches are even upstream yet..see appropriate mailing
lists).
I have backported a few patches into my kernel, but I'm not sure
how correct or complete they are.
I plan to try a little harder to get HT/VHT working in my 3.19 kernel
sometime soon. My 3.19 kernel patchset is also much cleaner than my
3.17 tree, so if you want to try to cherry-pick patches, that is the
one to use. (It also has a lot less testing, so maybe there are issues
yet.)
> (am thinking of trying this version of the firmware on openwrt chaos
> calmer on the tp-link archer C7 v2)
That would be welcome. If you see any firmware splats, please send logs
my way and I should be able to decode them.
Thanks,
Ben
>
>> Work-around tx-credits hang due to WMI/CE lockup in firmware (requires
>> ath10k driver patches)
>> Attempt to fix a few asserts reported by users (scan code, rate-ctrl,
>> resource-mgr, etc)
>>
>> Known bugs:
>> CE transport failure assert (Only seen on IMX6 hardware at this time)
>> WMI keepalive failure, probably due to inability to send mgt frames in bad
>> RF environment.
>>
>>
>> Downloads and more info is here:
>>
>> http://www.candelatech.com/ath10k.php
>>
>> As always, I am interested to hear of users having success or otherwise with
>> this firmware.
>>
>> Thanks,
>> Ben
>>
>> --
>> Ben Greear <greearb@candelatech.com>
>> Candela Technologies Inc http://www.candelatech.com
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
>
>
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-02-21 18:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-21 17:31 CT firmware 10.1.467-13 is released Ben Greear
2015-02-21 17:50 ` Dave Taht
2015-02-21 18:17 ` Ben Greear
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.