Re: Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG

[Alnie <memobook80@comcast.net>]

On 03/02/2015 10:10 PM, Takashi Iwai wrote:
> At Mon, 02 Mar 2015 19:37:12 -0800,
> Alnie wrote:
>>
>> At Wed, 25 Feb 2015 00:21:15 -0800,
>> Alnie wrote:
>>   >
>>   >
>>   >
>>   > On 02/25/2015 12:06 AM, Takashi Iwai wrote:
>>   > > At Tue, 24 Feb 2015 23:55:25 -0800,
>>   > > Alnie wrote:
>>   > >>
>>   > >> [ 2619.199658] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3)
>>   > >> [ 2619.199666] pciehp 0000:00:1c.3:pcie04: slot(3): Link Down event
>>   > >> [ 2619.199674] pciehp 0000:00:1c.3:pcie04: Link Down event ignored on
>>   > >> slot(3): already powering off
>>   > >> [ 2619.199911] pci_bus 0000:06: busn_res: [bus 06-0c] is released
>>   > >> [ 2620.757928] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
>>   > >> [ 2620.767950] pciehp 0000:00:1c.3:pcie04: slot(3): Link Up event
>>   > >> [ 2620.767985] pciehp 0000:00:1c.3:pcie04: Link Up event ignored on
>>   > >> slot(3): already powering on
>>   > >
>>   > > pciehp reacted power off and on here, and...
>>   > >
>>   > >> [ 2620.876160] pci 0000:05:00.0: [1102:7006] type 01 class 0x060400
>>   > >> [ 2620.876426] pci 0000:05:00.0: supports D1 D2
>>   > >> [ 2620.876719] pci 0000:05:00.0: bridge configuration invalid ([bus
>>   > >> 00-00]), reconfiguring
>>   > >> [ 2620.876928] pci_bus 0000:06: busn_res: can not insert [bus 06-ff]
>>   > >> under [bus 05-0c] (conflicts with (null) [bus 05-0c])
>>   > >
>>   > > .... and something failed here for the PCI bridge device.
>>   > >
>>   > >> [ 2620.876967] pci 0000:06:00.0: [1102:0009] type 00 class 0x040300
>>   > >> [ 2620.877013] pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
>>   > >> [ 2620.877203] pci 0000:06:00.0: supports D1 D2
>>   > >> [ 2620.877443] pci 0000:05:00.0: PCI bridge to [bus 06-ff]
>>   > >> [ 2620.877462] pci 0000:05:00.0:   bridge window [io  0x0000-0x0fff]
>>   > >> [ 2620.877474] pci 0000:05:00.0:   bridge window [mem
>> 0x00000000-0x000fffff]
>>   > >> [ 2620.877492] pci 0000:05:00.0:   bridge window [mem
>>   > >> 0x00000000-0x000fffff 64bit pref]
>>   > >> [ 2620.877500] pci_bus 0000:06: busn_res: [bus 06-ff] end is
>> updated to 06
>>   > >> [ 2620.877559] pci 0000:05:00.0: BAR 14: assigned [mem
>>   > >> 0xf4300000-0xf43fffff]
>>   > >> [ 2620.877568] pci 0000:05:00.0: BAR 15: assigned [mem
>>   > >> 0xf4000000-0xf40fffff 64bit pref]
>>   > >> [ 2620.877574] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x2fff]
>>   > >> [ 2620.877582] pci 0000:06:00.0: BAR 0: assigned [mem
>> 0xf4300000-0xf4303fff]
>>   > >> [ 2620.877595] pci 0000:05:00.0: PCI bridge to [bus 06]
>>   > >> [ 2620.877603] pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]
>>   > >> [ 2620.877618] pci 0000:05:00.0:   bridge window [mem
>> 0xf4300000-0xf43fffff]
>>   > >> [ 2620.877630] pci 0000:05:00.0:   bridge window [mem
>>   > >> 0xf4000000-0xf40fffff 64bit pref]
>>   > >> [ 2620.877647] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
>>   > >> [ 2620.877655] pcieport 0000:00:1c.3:   bridge window [io
>> 0x2000-0x2fff]
>>   > >> [ 2620.877667] pcieport 0000:00:1c.3:   bridge window [mem
>>   > >> 0xf4300000-0xf7efffff]
>>   > >> [ 2620.877677] pcieport 0000:00:1c.3:   bridge window [mem
>>   > >> 0xf4000000-0xf40fffff 64bit pref]
>>   > >> [ 2620.877990] pci 0000:05:00.0: enabling device (0000 -> 0003)
>>   > >> [ 2620.878013] snd_hda_intel 0000:06:00.0: enabling device (0000
>> -> 0002)
>>   > >> [ 2620.882747] azx_single_wait_for_response: 108 callbacks suppressed
>>   > >> [ 2620.882753] snd_hda_intel 0000:06:00.0: Codec #1 probe error;
>>   > >> disabling it...
>>   > >> [ 2620.887052] snd_hda_intel 0000:06:00.0: no AFG or MFG node found
>>   > >> [ 2620.887058] snd_hda_intel 0000:06:00.0: no codecs initialized
>>   > >
>>   > > What if you once unload snd-hda-intel module and reload again while
>>   > > keeping the card plugged?  I guess it still doesn't work, but just to
>>   > > be sure...
>>   > >
>>   > > Overall, this look more like a problem of PCI core stuff.  Better to
>>   > > toss the issue to PCI people.
>>   > >
>>   > >
>>   > > Takashi
>>   > >
>>   >
>>   > I did alsa force-reload and the same error comes up. Do you know of a
>>   > good starting point for presenting PCI issues?
>>   >
>>   >Ask on linux-pci at vger.kernel.org ?
>>   >
>>   >
>>   >Takashi
>>
>>
>> Bjorn has suggested it is not a PCI issue...
>> http://article.gmane.org/gmane.linux.kernel.pci/39492
>> Any other ideas in regards to this?
>
> After re-inserting the card, try to reload the driver module again.
>
>
> Takashi
>

Okay, booted with card not inserted and with hda-intel driver 
blacklisted. Inserted card & loaded driver and same complaint came up...
here is dmesg output http://pastebin.com/myBT23G1

-Alnie