All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Alnie <alnieb@yahoo.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: Issues w/ Creative Labs [SB X-Fi	Xtreme	Audio]	CA0110-IBG
Date: Wed, 25 Feb 2015 08:06:08 +0100	[thread overview]
Message-ID: <s5hr3te5v33.wl-tiwai@suse.de> (raw)
In-Reply-To: <54ED70FD.5010909@yahoo.com>

At Tue, 24 Feb 2015 22:51:41 -0800,
Alnie wrote:
> 
> 
> 
> On 02/24/2015 10:28 PM, Takashi Iwai wrote:
> > [Please don't top-post]
> >
> > At Wed, 25 Feb 2015 04:37:18 +0000 (UTC),
> > Alnie wrote:
> >>
> >> I've just submitted this...
> >> http://www.alsa-project.org/db/?f=b49e28f0fdd3120b3c222b4ff377c3e290baf497
> >>
> >> Although, I do agree the problem seems deeper than the driver. Could be something unique to my laptop/hardware. Although, as I've mentioned, the card has been working fine in Win 7. I double checked my BIOS and it's at latest version. Based on what I've seen, I feel a bit hopeless trying to reach out to Creative Labs about this. Do you think that would be a worthwhile endeavor?
> >
> > What kind of card is it, BTW?  When looking at your original post, I
> > noticed that the card provides its own PCI bridge and there is no
> > kernel driver binding to it.
> >
> >   05:00.0 PCI bridge: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG PCI to PCIe Bridge (prog-if 00 [Normal decode])
> >         Physical Slot: 3
> >         Flags: bus master, fast devsel, latency 0
> >         Bus: primary=05, secondary=06, subordinate=0c, sec-latency=36
> >         Memory behind bridge: f4300000-f43fffff
> >         Capabilities: [50] Power Management version 3
> >         Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
> >         Capabilities: [80] Subsystem: Creative Labs Device 0040
> >         Capabilities: [90] Express PCI-Express to PCI/PCI-X Bridge, MSI 00
> >         Capabilities: [100] Advanced Error Reporting
> >
> >   06:00.0 Audio device: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
> >         Subsystem: Creative Labs SB1040
> >         Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 19
> >         Memory at f4300000 (32-bit, non-prefetchable) [size=16K]
> >         Capabilities: [dc] Power Management version 3
> >         Kernel driver in use: snd_hda_intel
> >
> >
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> 
> it's an expresscard 54 audio card. more details... 
> http://www.notebookreview.com/notebookreview/creative-soundblaster-x-fi-xtreme-audio-for-notebook-review/

OK.  Could you show the lspci -nv output, too?  Usually some pcie
hotplug driver (either pcieport, shpchp, acpiphp, etc) should be bound
to a PCI bridge device.  Check the kernel message.  You might see
something related there...


Takashi

  reply	other threads:[~2015-02-25  7:06 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <54E10F0C.7070802@yahoo.com>
2015-02-15 21:33 ` Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG Alnie
2015-02-16 16:05   ` Takashi Iwai
2015-02-16 19:03     ` Alnie
2015-02-16 19:52       ` Takashi Iwai
2015-02-22 20:47         ` Alnie
2015-02-22 20:55           ` Alnie
2015-02-24 15:37             ` Takashi Iwai
2015-02-24 18:14               ` Alnie
2015-02-24 19:52                 ` Takashi Iwai
2015-02-24 20:10                   ` Alnie
2015-02-24 20:39                     ` Takashi Iwai
2015-02-24 21:30                       ` Alnie
2015-02-25  4:37                         ` Alnie
2015-02-25  6:28                           ` Takashi Iwai
2015-02-25  6:51                             ` Alnie
2015-02-25  7:06                               ` Takashi Iwai [this message]
2015-02-25  7:32                                 ` Alnie
2015-02-25  7:48                                   ` Takashi Iwai
2015-02-25  8:01                                     ` Alnie
     [not found]                                     ` <54ED7FED.9080600@yahoo.com>
2015-02-25  8:06                                       ` Takashi Iwai
2015-02-25  8:21                                         ` Alnie
2015-02-25  8:23                                           ` Takashi Iwai
2015-02-25  8:30                                             ` Alnie
2015-03-03  3:37 Alnie
2015-03-03  6:10 ` Takashi Iwai
2015-03-03  7:22   ` Alnie
2015-03-03  7:48     ` Takashi Iwai
2015-03-03  9:21       ` Alnie
2015-03-03 21:51         ` Alnie
2015-03-03 21:58           ` Alnie
2015-03-03 22:07           ` Takashi Iwai
2015-03-04  2:12             ` Alnie
2015-03-04  8:00               ` Takashi Iwai
2015-03-04  9:01                 ` Alnie
2015-03-04  9:35                   ` Takashi Iwai
2015-03-06 22:38                     ` Alnie
2015-03-06 22:50                       ` Alnie
2015-03-06 23:31                     ` Alnie
2015-03-07  7:56                       ` Takashi Iwai
2015-03-07 16:28                         ` Alnie
2015-03-07 16:32                           ` Takashi Iwai
2015-03-07 18:06                             ` Alnie
2015-03-09 15:22                               ` Alnie
2015-03-09 16:00                                 ` Takashi Iwai
2015-03-12  3:59                                   ` Alnie
2015-03-12  6:19                                     ` Takashi Iwai
2015-03-13  2:41                                       ` Alnie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hr3te5v33.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alnieb@yahoo.com \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.