From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91: dts: sama5d4ek: add leds in DT node
Date: Wed, 4 Mar 2015 11:54:33 +0100 [thread overview]
Message-ID: <54F6E469.8020405@atmel.com> (raw)
In-Reply-To: <1423474820-19118-1-git-send-email-josh.wu@atmel.com>
Le 09/02/2015 10:40, Josh Wu a ?crit :
> Add the leds DT node in the dts file.
> In the leds, d10 is set as heartbeat led.
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
added to at91-4.1-dt branch.
Thanks.
> ---
>
> arch/arm/boot/dts/at91-sama5d4ek.dts | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 9198b71..0c418be 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -257,4 +257,26 @@
> gpio-key,wakeup;
> };
> };
> +
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
> +
> + d8 {
> + label = "d8";
> + /* PE28, conflicts with usart4 rts pin */
> + gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
> + };
> +
> + d9 {
> + label = "d9";
> + gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
> + };
> +
> + d10 {
> + label = "d10";
> + gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> };
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Josh Wu <josh.wu@atmel.com>
Cc: linux-arm-kernel@lists.infradead.org,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Andrew Victor <linux@maxim.org.za>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: at91: dts: sama5d4ek: add leds in DT node
Date: Wed, 4 Mar 2015 11:54:33 +0100 [thread overview]
Message-ID: <54F6E469.8020405@atmel.com> (raw)
In-Reply-To: <1423474820-19118-1-git-send-email-josh.wu@atmel.com>
Le 09/02/2015 10:40, Josh Wu a écrit :
> Add the leds DT node in the dts file.
> In the leds, d10 is set as heartbeat led.
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
added to at91-4.1-dt branch.
Thanks.
> ---
>
> arch/arm/boot/dts/at91-sama5d4ek.dts | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 9198b71..0c418be 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -257,4 +257,26 @@
> gpio-key,wakeup;
> };
> };
> +
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
> +
> + d8 {
> + label = "d8";
> + /* PE28, conflicts with usart4 rts pin */
> + gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
> + };
> +
> + d9 {
> + label = "d9";
> + gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
> + };
> +
> + d10 {
> + label = "d10";
> + gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> };
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Josh Wu <josh.wu@atmel.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Andrew Victor <linux@maxim.org.za>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
"Kumar Gala" <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: at91: dts: sama5d4ek: add leds in DT node
Date: Wed, 4 Mar 2015 11:54:33 +0100 [thread overview]
Message-ID: <54F6E469.8020405@atmel.com> (raw)
In-Reply-To: <1423474820-19118-1-git-send-email-josh.wu@atmel.com>
Le 09/02/2015 10:40, Josh Wu a écrit :
> Add the leds DT node in the dts file.
> In the leds, d10 is set as heartbeat led.
>
> Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
added to at91-4.1-dt branch.
Thanks.
> ---
>
> arch/arm/boot/dts/at91-sama5d4ek.dts | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 9198b71..0c418be 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -257,4 +257,26 @@
> gpio-key,wakeup;
> };
> };
> +
> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
> +
> + d8 {
> + label = "d8";
> + /* PE28, conflicts with usart4 rts pin */
> + gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
> + };
> +
> + d9 {
> + label = "d9";
> + gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
> + };
> +
> + d10 {
> + label = "d10";
> + gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> };
>
--
Nicolas Ferre
next prev parent reply other threads:[~2015-03-04 10:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 9:40 [PATCH] ARM: at91: dts: sama5d4ek: add leds in DT node Josh Wu
2015-02-09 9:40 ` Josh Wu
2015-02-09 9:40 ` Josh Wu
2015-03-04 10:54 ` Nicolas Ferre [this message]
2015-03-04 10:54 ` Nicolas Ferre
2015-03-04 10:54 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54F6E469.8020405@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.