From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Mike Turquette <mturquette@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
Tawfik Bayouk <tawfik@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
Lior Amsalem <alior@marvell.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: Re: [PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups
Date: Wed, 04 Mar 2015 16:05:41 +0100 [thread overview]
Message-ID: <54F71F45.3060503@free-electrons.com> (raw)
In-Reply-To: <1425393675-17820-1-git-send-email-thomas.petazzoni@free-electrons.com>
Hi Thomas,
On 03/03/2015 15:40, Thomas Petazzoni wrote:
> Hello,
>
> This is the third version of the patch series adding Armada 39x basic
> support.
>
> This set of patches add basic support for a new family of Marvell EBU
> processors: the Armada 39x. They are based on Cortex-A9 (like Armada
> 375 and 38x) and the most important new feature is probably the
> addition of 10 GbE support.
>
> See http://www.marvell.com/embedded-processors/armada-39x/ for a basic
> introduction.
>
> Note that this web page talks about an Armada 395 and Armada 398, but
> so far the technical documentation we have been given access to only
> describes Armada 390 and Armada 398, so this series supports only
> Armada 390 and Armada 398 so far. Support for Armada 395 might be
> added in the future, once we get access to the appropriate technical
> details.
>
> Changes v2 -> v3:
>
> - Rebased on top of v4.0-rc1
>
> - Add support for the L2 cache
>
> - Added Acked-by from Gregory Clement on
>
> ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables
> ARM: mvebu: fix usb@ unit address on Armada 38x to match register address
> ARM: mvebu: add missing UART alias on Armada 38x
> devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family
>
> - Renamed 'ARM: mvebu: add missing UART alias on Armada 38x' to 'ARM:
> mvebu: add missing UART labels on Armada 38x'.
>
> - Added a patch 'ARM: mvebu: add UART labels to Armada 375'.
>
> - Change 'ARM: mvebu: add stdout-path to all armada-*.dts' to go
> further and eliminate completely /chosen/bootargs. This removes the
> non-desired 'earlyprintk' argument, and since console= was the only
> remaining kernel parameter, using stdout-path makes more
> sense. Requested by Rob Herring and Mark Rutland.
>
> - Dropped the patch "ARM: mvebu: use IRQ macros to define the SDHCI
> interrupt on Armada 38x" from the series, since Gregory Clement
> already submitted it as part of a different series.
>
> - Added patches 'ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig'
> and 'ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig'
> to update mvebu_v7_defconfig and multi_v7_defconfig so that they
> enable Marvell Armada 39x by default. Suggested by Gregory Clement.
>
> - Fix the unit address of the MPIC interrupt controller, in both the
> newly added Armada 39x support, as well as in the existing Armada
> 370, 375, 38x and XP support. Suggested by Gregory Clement.
>
> Changes v1 -> v2:
>
> - At the SoC level, add the description of SPI controller 0 and 1,
> NAND flash controller, SDHCI controller, Core Divider Clock (needed
> by the NAND flash controller), the main PLL clock (needed by the
> Core Divider Clock) and the XOR engines.
>
> - At the board level, add the description of the SPI flash connected
> to SPI bus 1, which contains the bootloader, and the description of
> the NAND flash.
>
> - Fix space vs. tab.
>
> - Use __initconst when defining the dt_compat table for Armada
> 39x. Suggested by Stephen Boyd.
>
> - Fix typo in commit log of "ARM: mvebu: add core support for Armada
> 39x", noticed by Maxime Ripard.
>
> - Remove earlyprintk from /chosen/bootargs. Suggested by Andrew Lunn.
>
> - Add aliases for uart[0-3]. Suggested by Andrew Lunn.
>
> - Add /chosen/stdout-path to Armada 398 DB DT. Suggested by Andrew
> Lunn.
>
> - Move pinctrl configurations at the SoC level. Suggested by Andrew
> Lunn.
>
> - Add several preparation/cleanup patches not related to Armada 39x
> directly, but whose topics were found while working on Armada 39x
> support:
>
> - Add __initconst to all dt_compat table in mach-mvebu.
> - Fixup usb@ unit address on Armada 38x
> - Add stdout-path to all armada-*.dts
> - Use GIC and IRQ macros in SDHCI definition of Armada 38x
> - Add missing UART alias on Armada 38x
>
> Thanks!
>
> Thomas
>
> Thomas Petazzoni (20):
> ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat
> tables
> ARM: mvebu: fix usb@ unit address on Armada 38x to match register
> address
> ARM: mvebu: add missing UART labels on Armada 38x
> ARM: mvebu: add UART labels to Armada 375
> ARM: mvebu: remove aliases for Ethernet devices on Armada
> 370/375/38x/XP
> ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP
> ARM: mvebu: use stdout-path in all armada-*.dts
> ARM: mvebu: fix unit address of MPIC nodes
> devicetree: bindings: add DT binding for the Marvell Armada 39x SoC
> family
> devicetree: bindings: update DT bindings for Marvell EBU clock support
> devicetree: bindings: add Device Tree bindings for Armada 39x
> pin-muxing controller
> devicetree: bindings: add new SMP enable method for Marvell Armada 39x
> clk: mvebu: extend common code to allow an optional refclk
> clk: mvebu: add Marvell Armada 39x driver
> pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x
> ARM: mvebu: add core support for Armada 39x
> ARM: mvebu: add Device Tree files for Armada 39x SoC and board
> Documentation: arm: update supported Marvell EBU processors
> ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig
> ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
Patches 1 applied to mvebu/cleanup
Patches 2 to 8 and patch 17 applied to mvebu/dt
Patches 9,12,16 and 18 applied to mvebu/soc
Patch 19 applied to mvebu/defconfig
and
Patches 10,13 and 14 applied to mvebu/clk as requested by Mike.
I had to amend the patch "ARM: mvebu: fix unit address of MPIC nodes"
by removing the armada-38x related part which was already applied by the
patch "ARM: mvebu: Fix MPIC unit address".
Patch 20 should be directly taken by the arm-soc maintainer.
Thanks,
Gregory
>
> Documentation/arm/Marvell/README | 5 +
> .../devicetree/bindings/arm/armada-39x.txt | 20 +
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> .../devicetree/bindings/clock/mvebu-core-clock.txt | 9 +
> .../bindings/clock/mvebu-gated-clock.txt | 15 +-
> .../pinctrl/marvell,armada-39x-pinctrl.txt | 78 ++++
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/armada-370-db.dts | 2 +-
> arch/arm/boot/dts/armada-370-mirabox.dts | 2 +-
> arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +-
> arch/arm/boot/dts/armada-370-netgear-rn104.dts | 2 +-
> arch/arm/boot/dts/armada-370-rd.dts | 2 +-
> arch/arm/boot/dts/armada-370-synology-ds213j.dts | 3 +-
> arch/arm/boot/dts/armada-370-xp.dtsi | 6 +-
> arch/arm/boot/dts/armada-370.dtsi | 2 +-
> arch/arm/boot/dts/armada-375-db.dts | 2 +-
> arch/arm/boot/dts/armada-375.dtsi | 10 +-
> arch/arm/boot/dts/armada-385-db-ap.dts | 3 +-
> arch/arm/boot/dts/armada-388-db.dts | 4 +-
> arch/arm/boot/dts/armada-388-gp.dts | 5 +-
> arch/arm/boot/dts/armada-388-rd.dts | 2 +-
> arch/arm/boot/dts/armada-38x.dtsi | 11 +-
> .../dts/{armada-xp-matrix.dts => armada-390.dtsi} | 71 +---
> .../dts/{armada-388-db.dts => armada-398-db.dts} | 111 ++---
> .../dts/{armada-xp-matrix.dts => armada-398.dtsi} | 70 +---
> .../boot/dts/{armada-375.dtsi => armada-39x.dtsi} | 446 ++++++++-------------
> arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +-
> arch/arm/boot/dts/armada-xp-db.dts | 2 +-
> arch/arm/boot/dts/armada-xp-gp.dts | 2 +-
> arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 3 +-
> arch/arm/boot/dts/armada-xp-matrix.dts | 2 +-
> arch/arm/boot/dts/armada-xp-mv78260.dtsi | 1 -
> arch/arm/boot/dts/armada-xp-mv78460.dtsi | 1 -
> arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +-
> arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
> arch/arm/boot/dts/armada-xp-synology-ds414.dts | 3 +-
> arch/arm/boot/dts/armada-xp.dtsi | 5 +-
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/configs/mvebu_v7_defconfig | 1 +
> arch/arm/mach-mvebu/Kconfig | 14 +
> arch/arm/mach-mvebu/board-v7.c | 20 +-
> arch/arm/mach-mvebu/dove.c | 2 +-
> arch/arm/mach-mvebu/kirkwood.c | 2 +-
> arch/arm/mach-mvebu/platsmp-a9.c | 2 +
> drivers/clk/mvebu/Kconfig | 4 +
> drivers/clk/mvebu/Makefile | 1 +
> drivers/clk/mvebu/armada-39x.c | 156 +++++++
> drivers/clk/mvebu/common.c | 17 +
> drivers/clk/mvebu/common.h | 1 +
> drivers/pinctrl/mvebu/Kconfig | 4 +
> drivers/pinctrl/mvebu/Makefile | 1 +
> drivers/pinctrl/mvebu/pinctrl-armada-39x.c | 432 ++++++++++++++++++++
> 52 files changed, 1045 insertions(+), 524 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/armada-39x.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
> copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-390.dtsi} (61%)
> copy arch/arm/boot/dts/{armada-388-db.dts => armada-398-db.dts} (70%)
> copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-398.dtsi} (61%)
> copy arch/arm/boot/dts/{armada-375.dtsi => armada-39x.dtsi} (55%)
> create mode 100644 drivers/clk/mvebu/armada-39x.c
> create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-39x.c
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups
Date: Wed, 04 Mar 2015 16:05:41 +0100 [thread overview]
Message-ID: <54F71F45.3060503@free-electrons.com> (raw)
In-Reply-To: <1425393675-17820-1-git-send-email-thomas.petazzoni@free-electrons.com>
Hi Thomas,
On 03/03/2015 15:40, Thomas Petazzoni wrote:
> Hello,
>
> This is the third version of the patch series adding Armada 39x basic
> support.
>
> This set of patches add basic support for a new family of Marvell EBU
> processors: the Armada 39x. They are based on Cortex-A9 (like Armada
> 375 and 38x) and the most important new feature is probably the
> addition of 10 GbE support.
>
> See http://www.marvell.com/embedded-processors/armada-39x/ for a basic
> introduction.
>
> Note that this web page talks about an Armada 395 and Armada 398, but
> so far the technical documentation we have been given access to only
> describes Armada 390 and Armada 398, so this series supports only
> Armada 390 and Armada 398 so far. Support for Armada 395 might be
> added in the future, once we get access to the appropriate technical
> details.
>
> Changes v2 -> v3:
>
> - Rebased on top of v4.0-rc1
>
> - Add support for the L2 cache
>
> - Added Acked-by from Gregory Clement on
>
> ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables
> ARM: mvebu: fix usb@ unit address on Armada 38x to match register address
> ARM: mvebu: add missing UART alias on Armada 38x
> devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family
>
> - Renamed 'ARM: mvebu: add missing UART alias on Armada 38x' to 'ARM:
> mvebu: add missing UART labels on Armada 38x'.
>
> - Added a patch 'ARM: mvebu: add UART labels to Armada 375'.
>
> - Change 'ARM: mvebu: add stdout-path to all armada-*.dts' to go
> further and eliminate completely /chosen/bootargs. This removes the
> non-desired 'earlyprintk' argument, and since console= was the only
> remaining kernel parameter, using stdout-path makes more
> sense. Requested by Rob Herring and Mark Rutland.
>
> - Dropped the patch "ARM: mvebu: use IRQ macros to define the SDHCI
> interrupt on Armada 38x" from the series, since Gregory Clement
> already submitted it as part of a different series.
>
> - Added patches 'ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig'
> and 'ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig'
> to update mvebu_v7_defconfig and multi_v7_defconfig so that they
> enable Marvell Armada 39x by default. Suggested by Gregory Clement.
>
> - Fix the unit address of the MPIC interrupt controller, in both the
> newly added Armada 39x support, as well as in the existing Armada
> 370, 375, 38x and XP support. Suggested by Gregory Clement.
>
> Changes v1 -> v2:
>
> - At the SoC level, add the description of SPI controller 0 and 1,
> NAND flash controller, SDHCI controller, Core Divider Clock (needed
> by the NAND flash controller), the main PLL clock (needed by the
> Core Divider Clock) and the XOR engines.
>
> - At the board level, add the description of the SPI flash connected
> to SPI bus 1, which contains the bootloader, and the description of
> the NAND flash.
>
> - Fix space vs. tab.
>
> - Use __initconst when defining the dt_compat table for Armada
> 39x. Suggested by Stephen Boyd.
>
> - Fix typo in commit log of "ARM: mvebu: add core support for Armada
> 39x", noticed by Maxime Ripard.
>
> - Remove earlyprintk from /chosen/bootargs. Suggested by Andrew Lunn.
>
> - Add aliases for uart[0-3]. Suggested by Andrew Lunn.
>
> - Add /chosen/stdout-path to Armada 398 DB DT. Suggested by Andrew
> Lunn.
>
> - Move pinctrl configurations at the SoC level. Suggested by Andrew
> Lunn.
>
> - Add several preparation/cleanup patches not related to Armada 39x
> directly, but whose topics were found while working on Armada 39x
> support:
>
> - Add __initconst to all dt_compat table in mach-mvebu.
> - Fixup usb@ unit address on Armada 38x
> - Add stdout-path to all armada-*.dts
> - Use GIC and IRQ macros in SDHCI definition of Armada 38x
> - Add missing UART alias on Armada 38x
>
> Thanks!
>
> Thomas
>
> Thomas Petazzoni (20):
> ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat
> tables
> ARM: mvebu: fix usb@ unit address on Armada 38x to match register
> address
> ARM: mvebu: add missing UART labels on Armada 38x
> ARM: mvebu: add UART labels to Armada 375
> ARM: mvebu: remove aliases for Ethernet devices on Armada
> 370/375/38x/XP
> ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP
> ARM: mvebu: use stdout-path in all armada-*.dts
> ARM: mvebu: fix unit address of MPIC nodes
> devicetree: bindings: add DT binding for the Marvell Armada 39x SoC
> family
> devicetree: bindings: update DT bindings for Marvell EBU clock support
> devicetree: bindings: add Device Tree bindings for Armada 39x
> pin-muxing controller
> devicetree: bindings: add new SMP enable method for Marvell Armada 39x
> clk: mvebu: extend common code to allow an optional refclk
> clk: mvebu: add Marvell Armada 39x driver
> pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x
> ARM: mvebu: add core support for Armada 39x
> ARM: mvebu: add Device Tree files for Armada 39x SoC and board
> Documentation: arm: update supported Marvell EBU processors
> ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig
> ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
Patches 1 applied to mvebu/cleanup
Patches 2 to 8 and patch 17 applied to mvebu/dt
Patches 9,12,16 and 18 applied to mvebu/soc
Patch 19 applied to mvebu/defconfig
and
Patches 10,13 and 14 applied to mvebu/clk as requested by Mike.
I had to amend the patch "ARM: mvebu: fix unit address of MPIC nodes"
by removing the armada-38x related part which was already applied by the
patch "ARM: mvebu: Fix MPIC unit address".
Patch 20 should be directly taken by the arm-soc maintainer.
Thanks,
Gregory
>
> Documentation/arm/Marvell/README | 5 +
> .../devicetree/bindings/arm/armada-39x.txt | 20 +
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> .../devicetree/bindings/clock/mvebu-core-clock.txt | 9 +
> .../bindings/clock/mvebu-gated-clock.txt | 15 +-
> .../pinctrl/marvell,armada-39x-pinctrl.txt | 78 ++++
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/armada-370-db.dts | 2 +-
> arch/arm/boot/dts/armada-370-mirabox.dts | 2 +-
> arch/arm/boot/dts/armada-370-netgear-rn102.dts | 2 +-
> arch/arm/boot/dts/armada-370-netgear-rn104.dts | 2 +-
> arch/arm/boot/dts/armada-370-rd.dts | 2 +-
> arch/arm/boot/dts/armada-370-synology-ds213j.dts | 3 +-
> arch/arm/boot/dts/armada-370-xp.dtsi | 6 +-
> arch/arm/boot/dts/armada-370.dtsi | 2 +-
> arch/arm/boot/dts/armada-375-db.dts | 2 +-
> arch/arm/boot/dts/armada-375.dtsi | 10 +-
> arch/arm/boot/dts/armada-385-db-ap.dts | 3 +-
> arch/arm/boot/dts/armada-388-db.dts | 4 +-
> arch/arm/boot/dts/armada-388-gp.dts | 5 +-
> arch/arm/boot/dts/armada-388-rd.dts | 2 +-
> arch/arm/boot/dts/armada-38x.dtsi | 11 +-
> .../dts/{armada-xp-matrix.dts => armada-390.dtsi} | 71 +---
> .../dts/{armada-388-db.dts => armada-398-db.dts} | 111 ++---
> .../dts/{armada-xp-matrix.dts => armada-398.dtsi} | 70 +---
> .../boot/dts/{armada-375.dtsi => armada-39x.dtsi} | 446 ++++++++-------------
> arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 +-
> arch/arm/boot/dts/armada-xp-db.dts | 2 +-
> arch/arm/boot/dts/armada-xp-gp.dts | 2 +-
> arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 3 +-
> arch/arm/boot/dts/armada-xp-matrix.dts | 2 +-
> arch/arm/boot/dts/armada-xp-mv78260.dtsi | 1 -
> arch/arm/boot/dts/armada-xp-mv78460.dtsi | 1 -
> arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 2 +-
> arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +-
> arch/arm/boot/dts/armada-xp-synology-ds414.dts | 3 +-
> arch/arm/boot/dts/armada-xp.dtsi | 5 +-
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/configs/mvebu_v7_defconfig | 1 +
> arch/arm/mach-mvebu/Kconfig | 14 +
> arch/arm/mach-mvebu/board-v7.c | 20 +-
> arch/arm/mach-mvebu/dove.c | 2 +-
> arch/arm/mach-mvebu/kirkwood.c | 2 +-
> arch/arm/mach-mvebu/platsmp-a9.c | 2 +
> drivers/clk/mvebu/Kconfig | 4 +
> drivers/clk/mvebu/Makefile | 1 +
> drivers/clk/mvebu/armada-39x.c | 156 +++++++
> drivers/clk/mvebu/common.c | 17 +
> drivers/clk/mvebu/common.h | 1 +
> drivers/pinctrl/mvebu/Kconfig | 4 +
> drivers/pinctrl/mvebu/Makefile | 1 +
> drivers/pinctrl/mvebu/pinctrl-armada-39x.c | 432 ++++++++++++++++++++
> 52 files changed, 1045 insertions(+), 524 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/armada-39x.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
> copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-390.dtsi} (61%)
> copy arch/arm/boot/dts/{armada-388-db.dts => armada-398-db.dts} (70%)
> copy arch/arm/boot/dts/{armada-xp-matrix.dts => armada-398.dtsi} (61%)
> copy arch/arm/boot/dts/{armada-375.dtsi => armada-39x.dtsi} (55%)
> create mode 100644 drivers/clk/mvebu/armada-39x.c
> create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-39x.c
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2015-03-04 15:05 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 14:40 [PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups Thomas Petazzoni
2015-03-03 14:40 ` Thomas Petazzoni
2015-03-03 14:40 ` [PATCH v3 02/20] ARM: mvebu: fix usb@ unit address on Armada 38x to match register address Thomas Petazzoni
2015-03-03 14:40 ` Thomas Petazzoni
2015-03-03 14:40 ` [PATCH v3 03/20] ARM: mvebu: add missing UART labels on Armada 38x Thomas Petazzoni
2015-03-03 14:40 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 05/20] ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XP Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 07/20] ARM: mvebu: use stdout-path in all armada-*.dts Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 14/20] clk: mvebu: add Marvell Armada 39x driver Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
[not found] ` <1425393675-17820-1-git-send-email-thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-03-03 14:40 ` [PATCH v3 01/20] ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables Thomas Petazzoni
2015-03-03 14:40 ` Thomas Petazzoni
2015-03-03 14:40 ` [PATCH v3 04/20] ARM: mvebu: add UART labels to Armada 375 Thomas Petazzoni
2015-03-03 14:40 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 06/20] ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 08/20] ARM: mvebu: fix unit address of MPIC nodes Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 09/20] devicetree: bindings: add DT binding for the Marvell Armada 39x SoC family Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 10/20] devicetree: bindings: update DT bindings for Marvell EBU clock support Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 11/20] devicetree: bindings: add Device Tree bindings for Armada 39x pin-muxing controller Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-06 11:09 ` Linus Walleij
2015-03-06 11:09 ` Linus Walleij
2015-03-03 14:41 ` [PATCH v3 12/20] devicetree: bindings: add new SMP enable method for Marvell Armada 39x Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 13/20] clk: mvebu: extend common code to allow an optional refclk Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 15/20] pinctrl: mvebu: add pinctrl driver for Marvell Armada 39x Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
[not found] ` <1425393675-17820-16-git-send-email-thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-03-06 11:12 ` Linus Walleij
2015-03-06 11:12 ` Linus Walleij
2015-03-03 14:41 ` [PATCH v3 17/20] ARM: mvebu: add Device Tree files for Armada 39x SoC and board Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 18/20] Documentation: arm: update supported Marvell EBU processors Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 19/20] ARM: mvebu: enable Armada 39x in mvebu_v7_defconfig Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-03 14:41 ` [PATCH v3 20/20] ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-04-01 23:24 ` Olof Johansson
2015-04-01 23:24 ` Olof Johansson
2015-03-03 14:41 ` [PATCH v3 16/20] ARM: mvebu: add core support for Armada 39x Thomas Petazzoni
2015-03-03 14:41 ` Thomas Petazzoni
2015-03-04 15:05 ` Gregory CLEMENT [this message]
2015-03-04 15:05 ` [PATCH v3 00/20] ARM: mvebu: Armada 39x basic support, and preparatory cleanups Gregory CLEMENT
2015-03-04 15:20 ` Thomas Petazzoni
2015-03-04 15:20 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54F71F45.3060503@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@linaro.org \
--cc=nadavh@marvell.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tawfik@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.