From: stsp@list.ru (Stas Sergeev)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] n_tty: use kmalloc() instead of vmalloc() to avoid crash on armada-xp
Date: Wed, 11 Mar 2015 17:33:11 +0300 [thread overview]
Message-ID: <55005227.8090408@list.ru> (raw)
In-Reply-To: <20150311131433.GC8656@n2100.arm.linux.org.uk>
11.03.2015 16:14, Russell King - ARM Linux ?????:
> On Wed, Mar 11, 2015 at 01:44:57PM +0100, Gregory CLEMENT wrote:
>> Hi Stas,
>>
>> On 10/03/2015 17:54, Stas Sergeev wrote:
>>> Hello, the patch below is needed for a successful boot on armada-xp.
>>>
>> I am really surprised by this patch because I used the Armada XP based
>> board in a daily base and I never saw this issue.
> Can you provide some details about your board - does it have 8GB of
> memory, ranging from 0-0xf0000000, and 4G-8G ?
Yes, there should be 8G, here's the boot log from marvell kernel
that boots fine and works fine:
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.58-1-armadaxp (root at host-010-100) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #0 SMP Thu Dec 18 124
[ 0.000000] CPU: Marvell - PJ4Bv7 Processor [562f5842] revision 2
(ARMv7), cr=30c73c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine: Marvell Armada XP GP Board
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Reserving training memory: base=0x (null) size=0x2800
[ 0.000000] Reserving training memory: base=0x80000000 size=0x2800
[ 0.000000] Reserving training memory: base=0xc0000000 size=0x2800
[ 0.000000] Reserving training memory: base=0xe0000000 size=0x2800
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x1f0000000
[ 0.000000] memory.cnt = 0x2
[ 0.000000] memory[0x0] [0x00000000000000-0x000000efffffff],
0xf0000000 bytes
[ 0.000000] memory[0x1] [0x00000100000000-0x000001ffffffff],
0x100000000 bytes
[ 0.000000] reserved.cnt = 0x7
[ 0.000000] reserved[0x0] [0x00000000000000-0x000000000027ff],
0x2800 bytes
[ 0.000000] reserved[0x1] [0x00000000003000-0x00000000007fff],
0x5000 bytes
[ 0.000000] reserved[0x2] [0x000000000081e0-0x000000009ef02f],
0x9e6e50 bytes
[ 0.000000] reserved[0x3] [0x00000001100040-0x0000000142fad3],
0x32fa94 bytes
[ 0.000000] reserved[0x4] [0x00000080000000-0x000000800027ff],
0x2800 bytes
[ 0.000000] reserved[0x5] [0x000000c0000000-0x000000c00027ff],
0x2800 bytes
[ 0.000000] reserved[0x6] [0x000000e0000000-0x000000e00027ff],
0x2800 bytes
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] SMP: init cpus
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c5442000 s7104 r8192 d13376
u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2015232
[ 0.000000] Kernel command line: console=ttyS0,115200
earlyprintk=ttyS0 root=/dev/sda2 rw pm_disable memblock=debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Memory: 3840MB 4096MB = 7936MB total
[ 0.000000] Memory: 8015704k/8015704k available, 110760k reserved,
7299036K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf3000000 - 0xfa800000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf2800000 ( 808 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08b4000 (8880 kB)
[ 0.000000] .init : 0xc08b4000 - 0xc08fabc0 ( 283 kB)
[ 0.000000] .data : 0xc08fc000 - 0xc0948a20 ( 307 kB)
[ 0.000000] .bss : 0xc0948a44 - 0xc09ef030 ( 666 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:211
[ 0.000000] Initializing ArmadaXP SOC Timer 0
[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps
every 171798ms
[ 117.562527] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 117.655298] pid_max: default: 32768 minimum: 301
[ 117.660091] Security Framework initialized
[ 117.664285] AppArmor: AppArmor initialized
[ 117.668578] Mount-cache hash table entries: 512
[ 117.673594] Initializing cgroup subsys cpuacct
[ 117.678123] Initializing cgroup subsys memory
[ 117.682584] Initializing cgroup subsys devices
[ 117.687093] Initializing cgroup subsys freezer
[ 117.691601] Initializing cgroup subsys net_cls
[ 117.696117] Initializing cgroup subsys blkio
[ 117.700528] CPU: Testing write buffer coherency: ok
[ 117.705627] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 117.711350] SMP: prepare CPUs (4 cores)
[ 117.715539] Setting Clocks for secondary CPUs
[ 117.720891] SMP: CPU 0 Waking up CPU 1
[ 117.732639] CPU1: Booted secondary processor
[ 117.772428] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 117.772858] SMP: CPU 0 Waking up CPU 2
[ 117.794638] CPU2: Booted secondary processor
[ 117.832429] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 117.832864] SMP: CPU 0 Waking up CPU 3
[ 117.857151] CPU3: Booted secondary processor
[ 117.892429] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 117.892493] Brought up 4 CPUs
[ 117.905580] SMP: Total of 4 processors activated (6376.65 BogoMIPS).
[ 117.912745] devtmpfs: initialized
[ 117.921130] xor: measuring software checksum speed
[ 117.972401] arm4regs : 1544.800 MB/sec
[ 118.022399] 8regs : 1147.600 MB/sec
[ 118.072399] 32regs : 1472.000 MB/sec
[ 118.076648] xor: using function: arm4regs (1544.800 MB/sec)
[ 118.083158] print_constraints: dummy:
[ 118.087341] NET: Registered protocol family 16
[ 118.092028] ARMADA XP error handling module was loaded
[ 118.098986] Aurora: Working in ARMv7 mode
[ 118.103086] L0 cache Enabled
[ 118.106038] Speculative Prefetch Disabled
[ 118.110127] Aurora L2 Cache Enabled
[ 118.113963] Support IO coherency.
[ 118.220261]
[ 118.221830] Marvell Armada-XP RD-AXP-GP rev 1.0 Board - Soc:
MV78460 B0 LE
[ 118.229060] Detected Tclk 250000000, SysClk 800000000, FabricClk
800000000, PClk 1600000000
[ 118.237634] LSP version: linux-3.2.58-2014_T2.0
[ 118.242407] Marvell Armada-XP Unique Device ID: 00196621A784C374
(UniqeID_val0: A784C374, UniqeID_val1: 00196621)
[ 118.252880]
[ 118.255972] Register platform device: mv_neta_port_0
[ 118.261098] Register platform device: mv_neta_port_2
[ 118.266868] registered dev#0 asa ehci_marvell
[ 118.271569] Marvell USB EHCI Host controller #0: f20f4000
[ 118.277140] registered dev#1 asa ehci_marvell
[ 118.281838] Marvell USB EHCI Host controller #1: f2144e00
[ 118.287402] registered dev#2 asa ehci_marvell
[ 118.292100] Marvell USB EHCI Host controller #2: f2144c00
[ 118.310312] bio: create slab <bio-0> at 0
[ 118.482530] raid6: int32x1 182 MB/s
[ 118.652535] raid6: int32x2 281 MB/s
[ 118.822632] raid6: int32x4 265 MB/s
[ 118.992396] raid6: int32x8 309 MB/s
[ 118.996216] raid6: using algorithm int32x8 (309 MB/s)
[ 119.002219] vgaarb: loaded
[ 119.006888] SCSI subsystem initialized
[ 119.011362] usbcore: registered new interface driver usbfs
[ 119.017071] usbcore: registered new interface driver hub
[ 119.022564] usbcore: registered new device driver usb
[ 119.029036] NetLabel: Initializing
[ 119.032565] NetLabel: domain hash size = 128
[ 119.036985] NetLabel: protocols = UNLABELED CIPSOv4
[ 119.042032] NetLabel: unlabeled traffic allowed by default
[ 119.047954] Switching to clocksource axp_clocksource
[ 119.053160] FS-Cache: Loaded
[ 119.056149] AppArmor: AppArmor Filesystem Enabled
[ 119.062592] NET: Registered protocol family 2
[ 119.067119] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 119.074573] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 119.082855] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 119.089918] TCP: Hash tables configured (established 131072 bind 65536)
[ 119.096594] TCP reno registered
[ 119.099808] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 119.105806] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 119.112374] NET: Registered protocol family 1
[ 119.116974] RPC: Registered named UNIX socket transport module.
[ 119.122951] RPC: Registered udp transport module.
[ 119.127726] RPC: Registered tcp transport module.
[ 119.132492] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 119.139102] Trying to unpack rootfs image as initramfs...
[ 119.257367] Freeing initrd memory: 3260K
[ 119.261366] PCI-E: Checking physical bus #0 (controller #8): Enabled
- Link UP
[ 119.268817] PCI-E: Checking physical bus #1 (controller #9): Enabled
- No Link
[ 119.276801] PCI: bus0: Fast back to back transfers disabled
[ 119.282644] pci 0000:00:00.0: BAR 2: assigned [mem
0xf3000000-0xf303ffff 64bit]
[ 119.290027] pci 0000:00:00.0: BAR 2: set to [mem
0xf3000000-0xf303ffff 64bit] (PCI address [0xf3000000-0xf303ffff])
[ 119.300509] pci 0000:00:00.0: BAR 0: assigned [mem
0xf3040000-0xf305ffff 64bit]
[ 119.307883] pci 0000:00:00.0: BAR 0: set to [mem
0xf3040000-0xf305ffff 64bit] (PCI address [0xf3040000-0xf305ffff])
[ 119.318367] pci 0000:00:00.0: BAR 6: assigned [mem
0xf3060000-0xf306ffff pref]
WARNING: multiple messages have this Message-ID (diff)
From: Stas Sergeev <stsp@list.ru>
To: Russell King - ARM Linux <linux@arm.linux.org.uk>,
Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linux kernel <linux-kernel@vger.kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] n_tty: use kmalloc() instead of vmalloc() to avoid crash on armada-xp
Date: Wed, 11 Mar 2015 17:33:11 +0300 [thread overview]
Message-ID: <55005227.8090408@list.ru> (raw)
In-Reply-To: <20150311131433.GC8656@n2100.arm.linux.org.uk>
11.03.2015 16:14, Russell King - ARM Linux пишет:
> On Wed, Mar 11, 2015 at 01:44:57PM +0100, Gregory CLEMENT wrote:
>> Hi Stas,
>>
>> On 10/03/2015 17:54, Stas Sergeev wrote:
>>> Hello, the patch below is needed for a successful boot on armada-xp.
>>>
>> I am really surprised by this patch because I used the Armada XP based
>> board in a daily base and I never saw this issue.
> Can you provide some details about your board - does it have 8GB of
> memory, ranging from 0-0xf0000000, and 4G-8G ?
Yes, there should be 8G, here's the boot log from marvell kernel
that boots fine and works fine:
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.58-1-armadaxp (root@host-010-100) (gcc
version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #0 SMP Thu Dec 18 124
[ 0.000000] CPU: Marvell - PJ4Bv7 Processor [562f5842] revision 2
(ARMv7), cr=30c73c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine: Marvell Armada XP GP Board
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Reserving training memory: base=0x (null) size=0x2800
[ 0.000000] Reserving training memory: base=0x80000000 size=0x2800
[ 0.000000] Reserving training memory: base=0xc0000000 size=0x2800
[ 0.000000] Reserving training memory: base=0xe0000000 size=0x2800
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x1f0000000
[ 0.000000] memory.cnt = 0x2
[ 0.000000] memory[0x0] [0x00000000000000-0x000000efffffff],
0xf0000000 bytes
[ 0.000000] memory[0x1] [0x00000100000000-0x000001ffffffff],
0x100000000 bytes
[ 0.000000] reserved.cnt = 0x7
[ 0.000000] reserved[0x0] [0x00000000000000-0x000000000027ff],
0x2800 bytes
[ 0.000000] reserved[0x1] [0x00000000003000-0x00000000007fff],
0x5000 bytes
[ 0.000000] reserved[0x2] [0x000000000081e0-0x000000009ef02f],
0x9e6e50 bytes
[ 0.000000] reserved[0x3] [0x00000001100040-0x0000000142fad3],
0x32fa94 bytes
[ 0.000000] reserved[0x4] [0x00000080000000-0x000000800027ff],
0x2800 bytes
[ 0.000000] reserved[0x5] [0x000000c0000000-0x000000c00027ff],
0x2800 bytes
[ 0.000000] reserved[0x6] [0x000000e0000000-0x000000e00027ff],
0x2800 bytes
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] SMP: init cpus
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c5442000 s7104 r8192 d13376
u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2015232
[ 0.000000] Kernel command line: console=ttyS0,115200
earlyprintk=ttyS0 root=/dev/sda2 rw pm_disable memblock=debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Memory: 3840MB 4096MB = 7936MB total
[ 0.000000] Memory: 8015704k/8015704k available, 110760k reserved,
7299036K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf3000000 - 0xfa800000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf2800000 ( 808 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc08b4000 (8880 kB)
[ 0.000000] .init : 0xc08b4000 - 0xc08fabc0 ( 283 kB)
[ 0.000000] .data : 0xc08fc000 - 0xc0948a20 ( 307 kB)
[ 0.000000] .bss : 0xc0948a44 - 0xc09ef030 ( 666 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:211
[ 0.000000] Initializing ArmadaXP SOC Timer 0
[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps
every 171798ms
[ 117.562527] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 117.655298] pid_max: default: 32768 minimum: 301
[ 117.660091] Security Framework initialized
[ 117.664285] AppArmor: AppArmor initialized
[ 117.668578] Mount-cache hash table entries: 512
[ 117.673594] Initializing cgroup subsys cpuacct
[ 117.678123] Initializing cgroup subsys memory
[ 117.682584] Initializing cgroup subsys devices
[ 117.687093] Initializing cgroup subsys freezer
[ 117.691601] Initializing cgroup subsys net_cls
[ 117.696117] Initializing cgroup subsys blkio
[ 117.700528] CPU: Testing write buffer coherency: ok
[ 117.705627] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 117.711350] SMP: prepare CPUs (4 cores)
[ 117.715539] Setting Clocks for secondary CPUs
[ 117.720891] SMP: CPU 0 Waking up CPU 1
[ 117.732639] CPU1: Booted secondary processor
[ 117.772428] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 117.772858] SMP: CPU 0 Waking up CPU 2
[ 117.794638] CPU2: Booted secondary processor
[ 117.832429] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 117.832864] SMP: CPU 0 Waking up CPU 3
[ 117.857151] CPU3: Booted secondary processor
[ 117.892429] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 117.892493] Brought up 4 CPUs
[ 117.905580] SMP: Total of 4 processors activated (6376.65 BogoMIPS).
[ 117.912745] devtmpfs: initialized
[ 117.921130] xor: measuring software checksum speed
[ 117.972401] arm4regs : 1544.800 MB/sec
[ 118.022399] 8regs : 1147.600 MB/sec
[ 118.072399] 32regs : 1472.000 MB/sec
[ 118.076648] xor: using function: arm4regs (1544.800 MB/sec)
[ 118.083158] print_constraints: dummy:
[ 118.087341] NET: Registered protocol family 16
[ 118.092028] ARMADA XP error handling module was loaded
[ 118.098986] Aurora: Working in ARMv7 mode
[ 118.103086] L0 cache Enabled
[ 118.106038] Speculative Prefetch Disabled
[ 118.110127] Aurora L2 Cache Enabled
[ 118.113963] Support IO coherency.
[ 118.220261]
[ 118.221830] Marvell Armada-XP RD-AXP-GP rev 1.0 Board - Soc:
MV78460 B0 LE
[ 118.229060] Detected Tclk 250000000, SysClk 800000000, FabricClk
800000000, PClk 1600000000
[ 118.237634] LSP version: linux-3.2.58-2014_T2.0
[ 118.242407] Marvell Armada-XP Unique Device ID: 00196621A784C374
(UniqeID_val0: A784C374, UniqeID_val1: 00196621)
[ 118.252880]
[ 118.255972] Register platform device: mv_neta_port_0
[ 118.261098] Register platform device: mv_neta_port_2
[ 118.266868] registered dev#0 asa ehci_marvell
[ 118.271569] Marvell USB EHCI Host controller #0: f20f4000
[ 118.277140] registered dev#1 asa ehci_marvell
[ 118.281838] Marvell USB EHCI Host controller #1: f2144e00
[ 118.287402] registered dev#2 asa ehci_marvell
[ 118.292100] Marvell USB EHCI Host controller #2: f2144c00
[ 118.310312] bio: create slab <bio-0> at 0
[ 118.482530] raid6: int32x1 182 MB/s
[ 118.652535] raid6: int32x2 281 MB/s
[ 118.822632] raid6: int32x4 265 MB/s
[ 118.992396] raid6: int32x8 309 MB/s
[ 118.996216] raid6: using algorithm int32x8 (309 MB/s)
[ 119.002219] vgaarb: loaded
[ 119.006888] SCSI subsystem initialized
[ 119.011362] usbcore: registered new interface driver usbfs
[ 119.017071] usbcore: registered new interface driver hub
[ 119.022564] usbcore: registered new device driver usb
[ 119.029036] NetLabel: Initializing
[ 119.032565] NetLabel: domain hash size = 128
[ 119.036985] NetLabel: protocols = UNLABELED CIPSOv4
[ 119.042032] NetLabel: unlabeled traffic allowed by default
[ 119.047954] Switching to clocksource axp_clocksource
[ 119.053160] FS-Cache: Loaded
[ 119.056149] AppArmor: AppArmor Filesystem Enabled
[ 119.062592] NET: Registered protocol family 2
[ 119.067119] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 119.074573] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 119.082855] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 119.089918] TCP: Hash tables configured (established 131072 bind 65536)
[ 119.096594] TCP reno registered
[ 119.099808] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 119.105806] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 119.112374] NET: Registered protocol family 1
[ 119.116974] RPC: Registered named UNIX socket transport module.
[ 119.122951] RPC: Registered udp transport module.
[ 119.127726] RPC: Registered tcp transport module.
[ 119.132492] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 119.139102] Trying to unpack rootfs image as initramfs...
[ 119.257367] Freeing initrd memory: 3260K
[ 119.261366] PCI-E: Checking physical bus #0 (controller #8): Enabled
- Link UP
[ 119.268817] PCI-E: Checking physical bus #1 (controller #9): Enabled
- No Link
[ 119.276801] PCI: bus0: Fast back to back transfers disabled
[ 119.282644] pci 0000:00:00.0: BAR 2: assigned [mem
0xf3000000-0xf303ffff 64bit]
[ 119.290027] pci 0000:00:00.0: BAR 2: set to [mem
0xf3000000-0xf303ffff 64bit] (PCI address [0xf3000000-0xf303ffff])
[ 119.300509] pci 0000:00:00.0: BAR 0: assigned [mem
0xf3040000-0xf305ffff 64bit]
[ 119.307883] pci 0000:00:00.0: BAR 0: set to [mem
0xf3040000-0xf305ffff 64bit] (PCI address [0xf3040000-0xf305ffff])
[ 119.318367] pci 0000:00:00.0: BAR 6: assigned [mem
0xf3060000-0xf306ffff pref]
next prev parent reply other threads:[~2015-03-11 14:33 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-10 16:54 [PATCH] n_tty: use kmalloc() instead of vmalloc() to avoid crash on armada-xp Stas Sergeev
2015-03-10 16:54 ` Stas Sergeev
2015-03-10 17:17 ` Catalin Marinas
2015-03-10 17:17 ` Catalin Marinas
2015-03-10 17:27 ` Stas Sergeev
2015-03-10 17:27 ` Stas Sergeev
2015-03-10 17:38 ` Russell King - ARM Linux
2015-03-10 17:38 ` Russell King - ARM Linux
2015-03-10 18:31 ` Stas Sergeev
2015-03-10 18:31 ` Stas Sergeev
2015-03-10 18:54 ` Russell King - ARM Linux
2015-03-10 18:54 ` Russell King - ARM Linux
2015-03-11 12:30 ` Stas Sergeev
2015-03-11 12:30 ` Stas Sergeev
2015-03-11 12:47 ` Russell King - ARM Linux
2015-03-11 12:47 ` Russell King - ARM Linux
2015-03-11 14:24 ` Stas Sergeev
2015-03-11 14:24 ` Stas Sergeev
2015-03-11 16:30 ` Peter Hurley
2015-03-11 16:30 ` Peter Hurley
2015-03-11 16:39 ` Stas Sergeev
2015-03-11 16:39 ` Stas Sergeev
2015-03-12 12:33 ` Peter Hurley
2015-03-12 12:33 ` Peter Hurley
2015-03-12 12:47 ` Stas Sergeev
2015-03-12 12:47 ` Stas Sergeev
2015-03-12 13:04 ` Russell King - ARM Linux
2015-03-12 13:04 ` Russell King - ARM Linux
2015-03-12 13:11 ` Stas Sergeev
2015-03-12 13:11 ` Stas Sergeev
2015-03-12 15:34 ` Vladimir Murzin
2015-03-12 15:34 ` Vladimir Murzin
2015-03-12 12:59 ` Russell King - ARM Linux
2015-03-12 12:59 ` Russell King - ARM Linux
2015-03-10 17:29 ` Russell King - ARM Linux
2015-03-10 17:29 ` Russell King - ARM Linux
2015-03-10 17:35 ` Peter Hurley
2015-03-10 17:35 ` Peter Hurley
2015-03-10 17:51 ` Stas Sergeev
2015-03-10 17:51 ` Stas Sergeev
2015-03-10 18:45 ` Peter Hurley
2015-03-10 18:45 ` Peter Hurley
2015-03-11 12:44 ` Gregory CLEMENT
2015-03-11 12:44 ` Gregory CLEMENT
2015-03-11 12:57 ` Stas Sergeev
2015-03-11 12:57 ` Stas Sergeev
2015-03-11 13:14 ` Russell King - ARM Linux
2015-03-11 13:14 ` Russell King - ARM Linux
2015-03-11 14:33 ` Stas Sergeev [this message]
2015-03-11 14:33 ` Stas Sergeev
2015-03-11 15:01 ` Stas Sergeev
2015-03-11 15:01 ` Stas Sergeev
2015-03-11 15:13 ` Gregory CLEMENT
2015-03-11 15:13 ` Gregory CLEMENT
2015-03-11 15:22 ` Stas Sergeev
2015-03-11 15:22 ` Stas Sergeev
2015-03-12 13:06 ` Russell King - ARM Linux
2015-03-12 13:06 ` Russell King - ARM Linux
2015-03-11 16:52 ` Thomas Petazzoni
2015-03-11 16:52 ` Thomas Petazzoni
2015-03-11 17:26 ` Stas Sergeev
2015-03-11 17:26 ` Stas Sergeev
2015-03-11 17:46 ` Russell King - ARM Linux
2015-03-11 17:46 ` Russell King - ARM Linux
2015-03-11 17:56 ` Stas Sergeev
2015-03-11 17:56 ` Stas Sergeev
2015-03-11 18:11 ` Thomas Petazzoni
2015-03-11 18:11 ` Thomas Petazzoni
2015-03-11 18:38 ` Stas Sergeev
2015-03-11 18:38 ` Stas Sergeev
2015-03-11 18:41 ` Russell King - ARM Linux
2015-03-11 18:41 ` Russell King - ARM Linux
2015-03-11 18:08 ` Stas Sergeev
2015-03-11 18:08 ` Stas Sergeev
2015-03-11 18:33 ` Thomas Petazzoni
2015-03-11 18:33 ` Thomas Petazzoni
2015-03-12 12:44 ` Stas Sergeev
2015-03-12 12:44 ` Stas Sergeev
2015-03-12 12:47 ` Thomas Petazzoni
2015-03-12 12:47 ` Thomas Petazzoni
2015-03-12 13:03 ` Stas Sergeev
2015-03-12 13:03 ` Stas Sergeev
2015-03-12 13:12 ` Russell King - ARM Linux
2015-03-12 13:12 ` Russell King - ARM Linux
2015-03-12 13:16 ` Stas Sergeev
2015-03-12 13:16 ` Stas Sergeev
2015-03-12 13:55 ` Thomas Petazzoni
2015-03-12 13:55 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55005227.8090408@list.ru \
--to=stsp@list.ru \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.