All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: akash.goel@intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v4 00/11] Added missing changes for Turbo feature on SKL
Date: Thu, 12 Mar 2015 15:08:24 -0700	[thread overview]
Message-ID: <55020E58.3060606@virtuousgeek.org> (raw)
In-Reply-To: <1425620244-12637-1-git-send-email-akash.goel@intel.com>

On 03/05/2015 09:37 PM, akash.goel@intel.com wrote:
> From: Akash Goel <akash.goel@intel.com>
> 
> This patch series add the missing changes, required for proper
> functioning of the Turbo feature on SKL. Most of the changes are
> mainly due to the fact that on SKL, the frequency has to be programmed
> in units of 16.66 MHZ and the time period value programmed in Up/Down
> EI & threshold registers, is in units of 1.333 micro seconds.
> In this version, review comments from Chris & Ville have been addressed
> and a new patch has been added to enable the RPS interrupts programming
> for SKL also.
> 
> Akash Goel (11):
>   drm/i915/skl: Added new macros
>   drm/i915/skl: Updated intel_gpu_freq() and intel_freq_opcode()
>   drm/i915/skl: Updated the gen6_init_rps_frequencies function
>   drm/i915/skl: Updated the gen6_set_rps function
>   drm/i915/skl: Restructured the gen6_set_rps_thresholds function
>   drm/i915/skl: Updated the gen6_rps_limits function
>   drm/i915/skl: Updated the gen9_enable_rps function
>   drm/i915/skl: Updated the i915_frequency_info debugfs function
>   drm/i915/skl: Updated the act_freq_mhz_show sysfs function
>   drm/i915/skl: Enabling processing of Turbo interrupts
>   drm/i915/skl: Enable the RPS interrupts programming
> 
>  drivers/gpu/drm/i915/i915_debugfs.c |  25 ++++--
>  drivers/gpu/drm/i915/i915_drv.h     |   1 +
>  drivers/gpu/drm/i915/i915_irq.c     |   5 --
>  drivers/gpu/drm/i915/i915_reg.h     |   9 +++
>  drivers/gpu/drm/i915/i915_sysfs.c   |   4 +-
>  drivers/gpu/drm/i915/intel_pm.c     | 147 ++++++++++++++++++------------------
>  6 files changed, 105 insertions(+), 86 deletions(-)

It looks like turbo is working, but the pm_rps test is still having a
little trouble.  I patched this on top to make it happier, but there are
still problems with the test getting to the expected frequencies, please
check out https://bugs.freedesktop.org/show_bug.cgi?id=89123.

--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6696,7 +6696,8 @@ static int chv_freq_opcode(struct drm_i915_private
*dev_pr
 int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
 {
        if (IS_GEN9(dev_priv->dev))
-               return (val * GT_FREQUENCY_MULTIPLIER) / GEN9_FREQ_SCALER;
+               return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
+                       GEN9_FREQ_SCALER);
        else if (IS_CHERRYVIEW(dev_priv->dev))
                return chv_gpu_freq(dev_priv, val);
        else if (IS_VALLEYVIEW(dev_priv->dev))
@@ -6708,7 +6709,8 @@ int intel_gpu_freq(struct drm_i915_private
*dev_priv, int
 int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
 {
        if (IS_GEN9(dev_priv->dev))
-               return (val * GEN9_FREQ_SCALER) / GT_FREQUENCY_MULTIPLIER;
+               return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
+                       GT_FREQUENCY_MULTIPLIER);
        else if (IS_CHERRYVIEW(dev_priv->dev))
                return chv_freq_opcode(dev_priv, val);
        else if (IS_VALLEYVIEW(dev_priv->dev))


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

      parent reply	other threads:[~2015-03-12 22:08 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-06  5:37 [PATCH v4 00/11] Added missing changes for Turbo feature on SKL akash.goel
2015-03-06  5:37 ` [PATCH 01/11] drm/i915/skl: Added new macros akash.goel
2015-03-11 19:12   ` Ville Syrjälä
2015-03-06  5:37 ` [PATCH 02/11] drm/i915/skl: Updated intel_gpu_freq() and intel_freq_opcode() akash.goel
2015-03-06  5:37 ` [PATCH 03/11] drm/i915/skl: Updated the gen6_init_rps_frequencies function akash.goel
2015-03-11 19:12   ` Ville Syrjälä
2015-03-06  5:37 ` [PATCH 04/11] drm/i915/skl: Updated the gen6_set_rps function akash.goel
2015-03-06  5:37 ` [PATCH 05/11] drm/i915/skl: Restructured the gen6_set_rps_thresholds function akash.goel
2015-03-06  5:37 ` [PATCH 06/11] drm/i915/skl: Updated the gen6_rps_limits function akash.goel
2015-03-06  5:37 ` [PATCH 07/11] drm/i915/skl: Updated the gen9_enable_rps function akash.goel
2015-03-11 19:27   ` Jesse Barnes
2015-03-11 19:46     ` Chris Wilson
2015-03-11 20:08       ` Jesse Barnes
2015-03-11 20:39     ` Daniel Vetter
2015-03-06  5:37 ` [PATCH 08/11] drm/i915/skl: Updated the i915_frequency_info debugfs function akash.goel
2015-03-11 20:48   ` Ville Syrjälä
2015-03-06  5:37 ` [PATCH 09/11] drm/i915/skl: Updated the act_freq_mhz_show sysfs function akash.goel
2015-03-06  5:37 ` [PATCH 10/11] drm/i915/skl: Enabling processing of Turbo interrupts akash.goel
2015-03-11 19:23   ` Jesse Barnes
2015-03-06  5:37 ` [PATCH 11/11] drm/i915/skl: Enable the RPS interrupts programming akash.goel
2015-03-06 19:44   ` shuang.he
2015-03-11 21:12   ` Jesse Barnes
2015-03-12  9:14     ` Daniel Vetter
2015-03-12 22:08 ` Jesse Barnes [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55020E58.3060606@virtuousgeek.org \
    --to=jbarnes@virtuousgeek.org \
    --cc=akash.goel@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.