From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/9] ARM: at91 cleanups for 4.1 #1
Date: Fri, 13 Mar 2015 16:28:54 +0100 [thread overview]
Message-ID: <55030236.40509@atmel.com> (raw)
In-Reply-To: <1426172071-20743-1-git-send-email-alexandre.belloni@free-electrons.com>
Le 12/03/2015 15:54, Alexandre Belloni a ?crit :
> This series removes more mach/headers.
>
> Then it introduces a more scalable SoC detection infrastructure which allows to
> remove the at91_map_io/at91_alt_map_io and iotable_init ugliness.
>
> Changes in v4:
> - Changes soc family and name display, as requested by Nicolas
>
> Changes in v3:
> - Stop trying to unmap a range that failed ot be mapped
>
> Changes in v2:
> - All the SoC names are lowercased
> - Removed the unused compatible string
> - Use name/subname to display the type and subtype
>
>
> Alexandre Belloni (7):
> ARM: at91: remove unused at91_ioremap_matrix and header
> ARM: at91: remove unused _matrix.h headers
> ARM: at91/dt: introduce atmel,<chip>-dbgu
> ARM: at91: at91rm9200 use SoC detection infrastructure
> ARM: at91: at91sam9: use SoC detection infrastructure
> ARM: at91: sama5 use SoC detection infrastructure
> ARM: at91: remove old setup
>
> Arnd Bergmann (1):
> ARM: at91: remove NEED_MACH_IO_H
>
> Boris BREZILLON (1):
> ARM: at91: add soc detection infrastructure
Fully satisfied with the whole series:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
I take everything for at91-4.1-cleanup.
Bye,
> .../devicetree/bindings/serial/atmel-usart.txt | 3 +-
> arch/arm/Kconfig | 2 +-
> arch/arm/boot/dts/at91rm9200.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3.dtsi | 2 +-
> arch/arm/boot/dts/sama5d4.dtsi | 2 +-
> arch/arm/mach-at91/Kconfig | 1 +
> arch/arm/mach-at91/Makefile | 2 +-
> arch/arm/mach-at91/at91rm9200.c | 29 +-
> arch/arm/mach-at91/at91sam9.c | 76 +++--
> arch/arm/mach-at91/generic.h | 4 -
> arch/arm/mach-at91/include/mach/at91_matrix.h | 23 --
> .../mach-at91/include/mach/at91sam9260_matrix.h | 80 -----
> .../mach-at91/include/mach/at91sam9261_matrix.h | 64 ----
> .../mach-at91/include/mach/at91sam9263_matrix.h | 129 --------
> .../mach-at91/include/mach/at91sam9g45_matrix.h | 153 ----------
> .../mach-at91/include/mach/at91sam9n12_matrix.h | 53 ----
> .../arm/mach-at91/include/mach/at91sam9rl_matrix.h | 96 ------
> .../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 53 ----
> arch/arm/mach-at91/include/mach/io.h | 27 --
> arch/arm/mach-at91/sama5.c | 49 ++-
> arch/arm/mach-at91/setup.c | 330 ---------------------
> arch/arm/mach-at91/soc.c | 97 ++++++
> arch/arm/mach-at91/soc.h | 78 +++++
> drivers/pcmcia/Kconfig | 1 +
> drivers/pcmcia/at91_cf.c | 13 +-
> 32 files changed, 301 insertions(+), 1082 deletions(-)
> delete mode 100644 arch/arm/mach-at91/include/mach/at91_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/io.h
> delete mode 100644 arch/arm/mach-at91/setup.c
> create mode 100644 arch/arm/mach-at91/soc.c
> create mode 100644 arch/arm/mach-at91/soc.h
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
"Boris Brezillon" <boris.brezillon@free-electrons.com>,
Alexander Stein <alexander.stein@systec-electronic.com>
Subject: Re: [PATCH v4 0/9] ARM: at91 cleanups for 4.1 #1
Date: Fri, 13 Mar 2015 16:28:54 +0100 [thread overview]
Message-ID: <55030236.40509@atmel.com> (raw)
In-Reply-To: <1426172071-20743-1-git-send-email-alexandre.belloni@free-electrons.com>
Le 12/03/2015 15:54, Alexandre Belloni a écrit :
> This series removes more mach/headers.
>
> Then it introduces a more scalable SoC detection infrastructure which allows to
> remove the at91_map_io/at91_alt_map_io and iotable_init ugliness.
>
> Changes in v4:
> - Changes soc family and name display, as requested by Nicolas
>
> Changes in v3:
> - Stop trying to unmap a range that failed ot be mapped
>
> Changes in v2:
> - All the SoC names are lowercased
> - Removed the unused compatible string
> - Use name/subname to display the type and subtype
>
>
> Alexandre Belloni (7):
> ARM: at91: remove unused at91_ioremap_matrix and header
> ARM: at91: remove unused _matrix.h headers
> ARM: at91/dt: introduce atmel,<chip>-dbgu
> ARM: at91: at91rm9200 use SoC detection infrastructure
> ARM: at91: at91sam9: use SoC detection infrastructure
> ARM: at91: sama5 use SoC detection infrastructure
> ARM: at91: remove old setup
>
> Arnd Bergmann (1):
> ARM: at91: remove NEED_MACH_IO_H
>
> Boris BREZILLON (1):
> ARM: at91: add soc detection infrastructure
Fully satisfied with the whole series:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
I take everything for at91-4.1-cleanup.
Bye,
> .../devicetree/bindings/serial/atmel-usart.txt | 3 +-
> arch/arm/Kconfig | 2 +-
> arch/arm/boot/dts/at91rm9200.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
> arch/arm/boot/dts/sama5d3.dtsi | 2 +-
> arch/arm/boot/dts/sama5d4.dtsi | 2 +-
> arch/arm/mach-at91/Kconfig | 1 +
> arch/arm/mach-at91/Makefile | 2 +-
> arch/arm/mach-at91/at91rm9200.c | 29 +-
> arch/arm/mach-at91/at91sam9.c | 76 +++--
> arch/arm/mach-at91/generic.h | 4 -
> arch/arm/mach-at91/include/mach/at91_matrix.h | 23 --
> .../mach-at91/include/mach/at91sam9260_matrix.h | 80 -----
> .../mach-at91/include/mach/at91sam9261_matrix.h | 64 ----
> .../mach-at91/include/mach/at91sam9263_matrix.h | 129 --------
> .../mach-at91/include/mach/at91sam9g45_matrix.h | 153 ----------
> .../mach-at91/include/mach/at91sam9n12_matrix.h | 53 ----
> .../arm/mach-at91/include/mach/at91sam9rl_matrix.h | 96 ------
> .../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 53 ----
> arch/arm/mach-at91/include/mach/io.h | 27 --
> arch/arm/mach-at91/sama5.c | 49 ++-
> arch/arm/mach-at91/setup.c | 330 ---------------------
> arch/arm/mach-at91/soc.c | 97 ++++++
> arch/arm/mach-at91/soc.h | 78 +++++
> drivers/pcmcia/Kconfig | 1 +
> drivers/pcmcia/at91_cf.c | 13 +-
> 32 files changed, 301 insertions(+), 1082 deletions(-)
> delete mode 100644 arch/arm/mach-at91/include/mach/at91_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
> delete mode 100644 arch/arm/mach-at91/include/mach/io.h
> delete mode 100644 arch/arm/mach-at91/setup.c
> create mode 100644 arch/arm/mach-at91/soc.c
> create mode 100644 arch/arm/mach-at91/soc.h
>
--
Nicolas Ferre
next prev parent reply other threads:[~2015-03-13 15:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-12 14:54 [PATCH v4 0/9] ARM: at91 cleanups for 4.1 #1 Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 1/9] ARM: at91: remove NEED_MACH_IO_H Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 2/9] ARM: at91: remove unused at91_ioremap_matrix and header Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 3/9] ARM: at91: remove unused _matrix.h headers Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 4/9] ARM: at91/dt: introduce atmel,<chip>-dbgu Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 5/9] ARM: at91: add soc detection infrastructure Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 6/9] ARM: at91: at91rm9200 use SoC " Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 7/9] ARM: at91: at91sam9: " Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-12 14:54 ` [PATCH v4 8/9] ARM: at91: sama5 " Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-13 14:53 ` Nicolas Ferre
2015-03-13 14:53 ` Nicolas Ferre
2015-03-12 14:54 ` [PATCH v4 9/9] ARM: at91: remove old setup Alexandre Belloni
2015-03-12 14:54 ` Alexandre Belloni
2015-03-13 15:28 ` Nicolas Ferre [this message]
2015-03-13 15:28 ` [PATCH v4 0/9] ARM: at91 cleanups for 4.1 #1 Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55030236.40509@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.