GitLab and Gitorious

GitLab and Gitorious

[Yegor Yefremov]

Does it effect us? Should can-utils move to github?

http://lwn.net/Articles/635358/rss

Yegor

Re: GitLab and Gitorious

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 442 bytes --]

On 03/03/2015 10:35 PM, Yegor Yefremov wrote:
> Does it effect us? Should can-utils move to github?

Yes, or Oliver needs to get a kernel.org account :)

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

MOVED TO GITHUB: Linux-CAN user space source repositories

[Oliver Hartkopp]

As Gitorious is to be acquired by GitLab and gitorious.org will shut down at 
end of May the Linux-CAN / SocketCAN git repositories have to be moved away 
from https://gitorious.org/linux-can/

As many of you already have a GitHub account Marc and I agreed on following 
Yegors suggestion to move the Linux-CAN / SocketCAN repos to GitHub.

You can now find the Linux-CAN repositories at:

	https://github.com/linux-can/

The repositories are moved & rearranged from gitorious.org as shown below:

	Linux-CAN / SocketCAN user space applications
	https://github.com/linux-can/can-utils/

	Linux-CAN / SocketCAN testing applications
	https://github.com/linux-can/can-tests/

	Firmware for supported CAN adapters
	https://github.com/linux-can/can-firmware/

	Linux-CAN / SocketCAN logos
	https://github.com/linux-can/can-logos/

	Linux-CAN / SocketCAN miscellaneous stuff
	https://github.com/linux-can/can-misc/

The can-modules repository was not moved as this network layer stuff mostly 
puzzled people who built the sources without success on recent systems. As 
most of the network layer CAN protocols are already in Linux mainline, I moved 
can-modules to a 'private' repository to continue my ISO 15765-2:2015 protocol 
development:

Obsolete CAN network layer modules *ONLY* used for ISO 15765-2 development now
https://github.com/hartkopp/can-isotp-modules/

This repo will stay there but it is now separated from user space resources.

If you have forked repos or other code on gitorious which relies on the former 
repository setup make sure not to lose your work when gitorious shuts down in 
May. From now on the development will only continue on GitHub.

Have fun!

Oliver

On 03.03.2015 22:35, Yegor Yefremov wrote:
> Does it effect us? Should can-utils move to github?
>
> http://lwn.net/Articles/635358/rss
>
> Yegor

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Robert Schwebel]

On Thu, Mar 05, 2015 at 08:06:27PM +0100, Oliver Hartkopp wrote:
> You can now find the Linux-CAN repositories at:
> 
> 	https://github.com/linux-can/

This is a good move.
 
> 	Firmware for supported CAN adapters
> 	https://github.com/linux-can/can-firmware/

The softing firmware in this package is lacking a license. Is it even
allowed to distribute it? If yes, the linux-firmware repository would be
a good place for it.

rsc
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 885 bytes --]

On 03/05/2015 08:06 PM, Oliver Hartkopp wrote:
> As Gitorious is to be acquired by GitLab and gitorious.org will shut down at 
> end of May the Linux-CAN / SocketCAN git repositories have to be moved away 
> from https://gitorious.org/linux-can/
> 
> As many of you already have a GitHub account Marc and I agreed on following 
> Yegors suggestion to move the Linux-CAN / SocketCAN repos to GitHub.
> 
> You can now find the Linux-CAN repositories at:
> 
> 	https://github.com/linux-can/

Thanks Oliver for the work of setting up the linux-can Repo, it works
out of the box for me! \o/

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 975 bytes --]

On 03/05/2015 08:06 PM, Oliver Hartkopp wrote:
> As Gitorious is to be acquired by GitLab and gitorious.org will shut down at 
> end of May the Linux-CAN / SocketCAN git repositories have to be moved away 
> from https://gitorious.org/linux-can/
> 
> As many of you already have a GitHub account Marc and I agreed on following 
> Yegors suggestion to move the Linux-CAN / SocketCAN repos to GitHub.
> 
> You can now find the Linux-CAN repositories at:
> 
> 	https://github.com/linux-can/

I'll prepare a patch for MAINTAINERS. While there I want to add myself
as a maintainer for the networking layer aswell, so that I'll be on Cc
when get_maintainer.pl is used. Objections?

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Oliver Hartkopp]

On 06.03.2015 09:03, Marc Kleine-Budde wrote:
> On 03/05/2015 08:06 PM, Oliver Hartkopp wrote:
>> As Gitorious is to be acquired by GitLab and gitorious.org will shut down at
>> end of May the Linux-CAN / SocketCAN git repositories have to be moved away
>> from https://gitorious.org/linux-can/
>>
>> As many of you already have a GitHub account Marc and I agreed on following
>> Yegors suggestion to move the Linux-CAN / SocketCAN repos to GitHub.
>>
>> You can now find the Linux-CAN repositories at:
>>
>> 	https://github.com/linux-can/
>
> I'll prepare a patch for MAINTAINERS. While there I want to add myself
> as a maintainer for the networking layer aswell, so that I'll be on Cc
> when get_maintainer.pl is used. Objections?

No, that's fine to me.

It's a better feeling when going on holiday anyway :-)

Regards,
Oliver

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1224 bytes --]

On 03/06/2015 12:33 PM, Oliver Hartkopp wrote:
> 
> 
> On 06.03.2015 09:03, Marc Kleine-Budde wrote:
>> On 03/05/2015 08:06 PM, Oliver Hartkopp wrote:
>>> As Gitorious is to be acquired by GitLab and gitorious.org will shut down at
>>> end of May the Linux-CAN / SocketCAN git repositories have to be moved away
>>> from https://gitorious.org/linux-can/
>>>
>>> As many of you already have a GitHub account Marc and I agreed on following
>>> Yegors suggestion to move the Linux-CAN / SocketCAN repos to GitHub.
>>>
>>> You can now find the Linux-CAN repositories at:
>>>
>>> 	https://github.com/linux-can/
>>
>> I'll prepare a patch for MAINTAINERS. While there I want to add myself
>> as a maintainer for the networking layer aswell, so that I'll be on Cc
>> when get_maintainer.pl is used. Objections?
> 
> No, that's fine to me.
> 
> It's a better feeling when going on holiday anyway :-)

Is this an Acked-by?

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Oliver Hartkopp]

On 06.03.2015 14:48, Marc Kleine-Budde wrote:

>>> I'll prepare a patch for MAINTAINERS. While there I want to add myself
>>> as a maintainer for the networking layer aswell, so that I'll be on Cc
>>> when get_maintainer.pl is used. Objections?
>>
>> No, that's fine to me.
>>
>> It's a better feeling when going on holiday anyway :-)
>
> Is this an Acked-by?

Yes.

Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Laurent Vaudoit]

Hi,

> Obsolete CAN network layer modules *ONLY* used for ISO 15765-2 development 
now
> https://github.com/hartkopp/can-isotp-modules/
> 

i see the move to github but nothing about J1939 stuffs (kernel, 
iproute2...)
This mean J1939 is no more supported by linux-can?


> Have fun!
Best regards
> 
> Oliver
> 
Laurent

> To unsubscribe from this list: send the line "unsubscribe linux-can" in
> the body of a message to majordomo <at> vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Oliver Hartkopp]

Hi Laurent,

On 20.03.2015 11:03, Laurent Vaudoit wrote:

> i see the move to github but nothing about J1939 stuffs (kernel,
> iproute2...)
> This mean J1939 is no more supported by linux-can?

Kurt is already informed that gitorious will close.

So I assume he will move the j1939 sources to his personal github space too.

Regards,
Oliver

Re: MOVED TO GITHUB: Linux-CAN user space source repositories

[Kurt Van Dijck]

> Date:	Fri, 20 Mar 2015 18:56:25 +0100
> From: Oliver Hartkopp <socketcan@hartkopp.net>
> 
> Hi Laurent,
> 
> On 20.03.2015 11:03, Laurent Vaudoit wrote:
> 
> >i see the move to github but nothing about J1939 stuffs (kernel,
> >iproute2...)
> >This mean J1939 is no more supported by linux-can?
> 
> Kurt is already informed that gitorious will close.

indeed.

> 
> So I assume he will move the j1939 sources to his personal github space too.

Yes.
I expect this after Eastern holidays.

Kurt

moved to github: linux can-j1939 sources

[Kurt Van Dijck]

Hi all,

I moved my can-j1939 linux work towards my (personal) github account.
I also updated the eLinux.org page.

http://elinux.org/J1939
http://github.com/kurt-vd

Kind regards,
Kurt

--- Original message ---
> Date:	Fri, 20 Mar 2015 18:56:25 +0100
> From: Oliver Hartkopp <socketcan@hartkopp.net>
> To: Laurent Vaudoit <laurent.vaudoit@gmail.com>,
> 	Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
> CC: linux-can@vger.kernel.org
> Subject: Re: MOVED TO GITHUB: Linux-CAN user space source repositories
> List-ID: <linux-can.vger.kernel.org>
> 
> Hi Laurent,
> 
> On 20.03.2015 11:03, Laurent Vaudoit wrote:
> 
> >i see the move to github but nothing about J1939 stuffs (kernel,
> >iproute2...)
> >This mean J1939 is no more supported by linux-can?
> 
> Kurt is already informed that gitorious will close.
> 
> So I assume he will move the j1939 sources to his personal github space too.
> 
> Regards,
> Oliver
> --
> To unsubscribe from this list: send the line "unsubscribe linux-can" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html