[meta-oe][PATCH] vim: add checksum

[meta-oe][PATCH] vim: add checksum

[Rafaël Carré]

---
 meta-oe/recipes-support/vim/vim_7.4.481.bb | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/meta-oe/recipes-support/vim/vim_7.4.481.bb b/meta-oe/recipes-support/vim/vim_7.4.481.bb
index afdea84..ac59077 100644
--- a/meta-oe/recipes-support/vim/vim_7.4.481.bb
+++ b/meta-oe/recipes-support/vim/vim_7.4.481.bb
@@ -10,6 +10,10 @@ SRC_URI = "hg://vim.googlecode.com/hg/;protocol=https;module=vim \
            file://disable_acl_header_check.patch;patchdir=.. \
            file://vim-add-knob-whether-elf.h-are-checked.patch;patchdir=.. \
 "
+
+SRC_URI[md5sum] = "5fd5d754581a673a25733c12367cf9d2"
+SRC_URI[sha256sum] = "e2cc416dabea503e9e5631afc21bb00dcbfb9d05481641b75f247fd89ff4d7e8"
+
 SRCREV = "v7-4-481"
 
 S = "${WORKDIR}/vim/src"
-- 
2.1.0

Re: [meta-oe][PATCH] vim: add checksum

[Rafaël Carré]

Hello,

I couldn't reproduce the checksum error with a fresh build with an empty
downloads/ folder.

So this patch is apparently needed only when populating downloads/
folder before fetching vim.

I will investigate a bit more, I think the patch should actually be in
bitbake
(missing supports_checksum for Hg.py)

On 03/20/2015 03:20 PM, Rafaël Carré wrote:
> ---
>  meta-oe/recipes-support/vim/vim_7.4.481.bb | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/meta-oe/recipes-support/vim/vim_7.4.481.bb b/meta-oe/recipes-support/vim/vim_7.4.481.bb
> index afdea84..ac59077 100644
> --- a/meta-oe/recipes-support/vim/vim_7.4.481.bb
> +++ b/meta-oe/recipes-support/vim/vim_7.4.481.bb
> @@ -10,6 +10,10 @@ SRC_URI = "hg://vim.googlecode.com/hg/;protocol=https;module=vim \
>             file://disable_acl_header_check.patch;patchdir=.. \
>             file://vim-add-knob-whether-elf.h-are-checked.patch;patchdir=.. \
>  "
> +
> +SRC_URI[md5sum] = "5fd5d754581a673a25733c12367cf9d2"
> +SRC_URI[sha256sum] = "e2cc416dabea503e9e5631afc21bb00dcbfb9d05481641b75f247fd89ff4d7e8"
> +
>  SRCREV = "v7-4-481"
>  
>  S = "${WORKDIR}/vim/src"
> 

Re: [meta-oe][PATCH] vim: add checksum

[Martin Jansa]

[-- Attachment #1: Type: text/plain, Size: 1974 bytes --]

On Sun, Mar 22, 2015 at 11:09:03AM +0100, Rafaël Carré wrote:
> Hello,
> 
> I couldn't reproduce the checksum error with a fresh build with an empty
> downloads/ folder.
> 
> So this patch is apparently needed only when populating downloads/
> folder before fetching vim.
> 
> I will investigate a bit more, I think the patch should actually be in
> bitbake
> (missing supports_checksum for Hg.py)

Should bitbake support checksums for hg? We don't use them for any other
SCM like git or svn, if we do that for hg, what will be included in th
checksum? Whole directory with hg checkout? Is it stable (e.g. doesn't
hg fetch everything and then checkout required revision like git does?)

I've included this patch in master-next, but now when I see that it's
fetched from hg I'll drop it.

> On 03/20/2015 03:20 PM, Rafaël Carré wrote:
> > ---
> >  meta-oe/recipes-support/vim/vim_7.4.481.bb | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/meta-oe/recipes-support/vim/vim_7.4.481.bb b/meta-oe/recipes-support/vim/vim_7.4.481.bb
> > index afdea84..ac59077 100644
> > --- a/meta-oe/recipes-support/vim/vim_7.4.481.bb
> > +++ b/meta-oe/recipes-support/vim/vim_7.4.481.bb
> > @@ -10,6 +10,10 @@ SRC_URI = "hg://vim.googlecode.com/hg/;protocol=https;module=vim \
> >             file://disable_acl_header_check.patch;patchdir=.. \
> >             file://vim-add-knob-whether-elf.h-are-checked.patch;patchdir=.. \
> >  "
> > +
> > +SRC_URI[md5sum] = "5fd5d754581a673a25733c12367cf9d2"
> > +SRC_URI[sha256sum] = "e2cc416dabea503e9e5631afc21bb00dcbfb9d05481641b75f247fd89ff4d7e8"
> > +
> >  SRCREV = "v7-4-481"
> >  
> >  S = "${WORKDIR}/vim/src"
> > 
> -- 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 188 bytes --]

Re: [meta-oe][PATCH] vim: add checksum

[Rafaël Carré]

On 03/22/2015 04:55 PM, Martin Jansa wrote:
> On Sun, Mar 22, 2015 at 11:09:03AM +0100, Rafaël Carré wrote:
>> Hello,
>>
>> I couldn't reproduce the checksum error with a fresh build with an empty
>> downloads/ folder.
>>
>> So this patch is apparently needed only when populating downloads/
>> folder before fetching vim.
>>
>> I will investigate a bit more, I think the patch should actually be in
>> bitbake
>> (missing supports_checksum for Hg.py)
> 
> Should bitbake support checksums for hg? We don't use them for any other
> SCM like git or svn, if we do that for hg, what will be included in th
> checksum? Whole directory with hg checkout? Is it stable (e.g. doesn't
> hg fetch everything and then checkout required revision like git does?)

Exactly, what I meant was Hg.py needs to explicitely say checksums are
disabled:

supports_checksum(foo):
    return False


> I've included this patch in master-next, but now when I see that it's
> fetched from hg I'll drop it.
> 
>> On 03/20/2015 03:20 PM, Rafaël Carré wrote:
>>> ---
>>>  meta-oe/recipes-support/vim/vim_7.4.481.bb | 4 ++++
>>>  1 file changed, 4 insertions(+)
>>>
>>> diff --git a/meta-oe/recipes-support/vim/vim_7.4.481.bb b/meta-oe/recipes-support/vim/vim_7.4.481.bb
>>> index afdea84..ac59077 100644
>>> --- a/meta-oe/recipes-support/vim/vim_7.4.481.bb
>>> +++ b/meta-oe/recipes-support/vim/vim_7.4.481.bb
>>> @@ -10,6 +10,10 @@ SRC_URI = "hg://vim.googlecode.com/hg/;protocol=https;module=vim \
>>>             file://disable_acl_header_check.patch;patchdir=.. \
>>>             file://vim-add-knob-whether-elf.h-are-checked.patch;patchdir=.. \
>>>  "
>>> +
>>> +SRC_URI[md5sum] = "5fd5d754581a673a25733c12367cf9d2"
>>> +SRC_URI[sha256sum] = "e2cc416dabea503e9e5631afc21bb00dcbfb9d05481641b75f247fd89ff4d7e8"
>>> +
>>>  SRCREV = "v7-4-481"
>>>  
>>>  S = "${WORKDIR}/vim/src"

Re: [meta-oe][PATCH] vim: add checksum

[Martin Jansa]

On Sun, Mar 22, 2015 at 06:23:44PM +0100, Rafaël Carré wrote:
> On 03/22/2015 04:55 PM, Martin Jansa wrote:
> > On Sun, Mar 22, 2015 at 11:09:03AM +0100, Rafaël Carré wrote:
> >> Hello,
> >>
> >> I couldn't reproduce the checksum error with a fresh build with an empty
> >> downloads/ folder.
> >>
> >> So this patch is apparently needed only when populating downloads/
> >> folder before fetching vim.
> >>
> >> I will investigate a bit more, I think the patch should actually be in
> >> bitbake
> >> (missing supports_checksum for Hg.py)
> > 
> > Should bitbake support checksums for hg? We don't use them for any other
> > SCM like git or svn, if we do that for hg, what will be included in th
> > checksum? Whole directory with hg checkout? Is it stable (e.g. doesn't
> > hg fetch everything and then checkout required revision like git does?)
> 
> Exactly, what I meant was Hg.py needs to explicitely say checksums are
> disabled:
> 
> supports_checksum(foo):
>     return False

Did you send such patch to bitbake-devel? I haven't seen it there.

Regards,

> 
> 
> > I've included this patch in master-next, but now when I see that it's
> > fetched from hg I'll drop it.
> > 
> >> On 03/20/2015 03:20 PM, Rafaël Carré wrote:
> >>> ---
> >>>  meta-oe/recipes-support/vim/vim_7.4.481.bb | 4 ++++
> >>>  1 file changed, 4 insertions(+)
> >>>
> >>> diff --git a/meta-oe/recipes-support/vim/vim_7.4.481.bb b/meta-oe/recipes-support/vim/vim_7.4.481.bb
> >>> index afdea84..ac59077 100644
> >>> --- a/meta-oe/recipes-support/vim/vim_7.4.481.bb
> >>> +++ b/meta-oe/recipes-support/vim/vim_7.4.481.bb
> >>> @@ -10,6 +10,10 @@ SRC_URI = "hg://vim.googlecode.com/hg/;protocol=https;module=vim \
> >>>             file://disable_acl_header_check.patch;patchdir=.. \
> >>>             file://vim-add-knob-whether-elf.h-are-checked.patch;patchdir=.. \
> >>>  "
> >>> +
> >>> +SRC_URI[md5sum] = "5fd5d754581a673a25733c12367cf9d2"
> >>> +SRC_URI[sha256sum] = "e2cc416dabea503e9e5631afc21bb00dcbfb9d05481641b75f247fd89ff4d7e8"
> >>> +
> >>>  SRCREV = "v7-4-481"
> >>>  
> >>>  S = "${WORKDIR}/vim/src"
> 
> -- 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-devel

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com

[PATCH] fetch/hg: Disable checksums for archived downloads

[Ash Charles]

Like the Git fetcher, the Mercurial fetcher shouldn't expect recipes to
provide a checksum.  As described [1], recipes using a mercurial
fetcher that don't provide a checksum will fail in a the repository has
previously been downloaded and archived.

Credit to Rafaël Carré for figuring out the bug.

[1] https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html

Signed-off-by: Ash Charles <ashcharles@gmail.com>
---
 bitbake/lib/bb/fetch2/hg.py | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/bitbake/lib/bb/fetch2/hg.py b/bitbake/lib/bb/fetch2/hg.py
index 81592f6..cab371f 100644
--- a/bitbake/lib/bb/fetch2/hg.py
+++ b/bitbake/lib/bb/fetch2/hg.py
@@ -43,6 +43,13 @@ class Hg(FetchMethod):
         """
         return ud.type in ['hg']
 
+    def supports_checksum(self, urldata):
+        """
+        Don't require checksums for local archives created from
+        repository checkouts.
+        """ 
+        return False
+
     def urldata_init(self, ud, d):
         """
         init hg specific variable within url data
-- 
2.1.4

[PATCH] fetch/hg: Disable checksums for archived downloads

[Ash Charles]

Like the Git fetcher, the Mercurial fetcher shouldn't expect recipes to
provide a checksum.  As described [1], recipes using a mercurial
fetcher that don't provide a checksum will fail in a the repository has
previously been downloaded and archived.

Credit to Rafaël Carré for figuring out the bug.

[1] https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html

Signed-off-by: Ash Charles <ashcharles@gmail.com>
---
 bitbake/lib/bb/fetch2/hg.py | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/bitbake/lib/bb/fetch2/hg.py b/bitbake/lib/bb/fetch2/hg.py
index 81592f6..cab371f 100644
--- a/bitbake/lib/bb/fetch2/hg.py
+++ b/bitbake/lib/bb/fetch2/hg.py
@@ -43,6 +43,13 @@ class Hg(FetchMethod):
         """
         return ud.type in ['hg']
 
+    def supports_checksum(self, urldata):
+        """
+        Don't require checksums for local archives created from
+        repository checkouts.
+        """ 
+        return False
+
     def urldata_init(self, ud, d):
         """
         init hg specific variable within url data
-- 
2.1.4

Re: [oe] [PATCH] fetch/hg: Disable checksums for archived downloads

[Robert Yang]

Hello,

I think that the following patch has broken the mirror tarball of hg:

http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005725.html

I wonder how did you test the patch, please ? Did you revert the patch:
  fetch/hg: support submodules ?

Or other ways, please ?

// Robert


On 05/22/2015 11:39 PM, Ash Charles wrote:
> Like the Git fetcher, the Mercurial fetcher shouldn't expect recipes to
> provide a checksum.  As described [1], recipes using a mercurial
> fetcher that don't provide a checksum will fail in a the repository has
> previously been downloaded and archived.
>
> Credit to Rafaël Carré for figuring out the bug.
>
> [1] https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>
> Signed-off-by: Ash Charles <ashcharles@gmail.com>
> ---
>   bitbake/lib/bb/fetch2/hg.py | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/bitbake/lib/bb/fetch2/hg.py b/bitbake/lib/bb/fetch2/hg.py
> index 81592f6..cab371f 100644
> --- a/bitbake/lib/bb/fetch2/hg.py
> +++ b/bitbake/lib/bb/fetch2/hg.py
> @@ -43,6 +43,13 @@ class Hg(FetchMethod):
>           """
>           return ud.type in ['hg']
>
> +    def supports_checksum(self, urldata):
> +        """
> +        Don't require checksums for local archives created from
> +        repository checkouts.
> +        """
> +        return False
> +
>       def urldata_init(self, ud, d):
>           """
>           init hg specific variable within url data
>

Re: [PATCH] fetch/hg: Disable checksums for archived downloads

[Robert Yang]

Hello,

I think that the following patch has broken the mirror tarball of hg:

http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005725.html

I wonder how did you test the patch, please ? Did you revert the patch:
  fetch/hg: support submodules ?

Or other ways, please ?

// Robert


On 05/22/2015 11:39 PM, Ash Charles wrote:
> Like the Git fetcher, the Mercurial fetcher shouldn't expect recipes to
> provide a checksum.  As described [1], recipes using a mercurial
> fetcher that don't provide a checksum will fail in a the repository has
> previously been downloaded and archived.
>
> Credit to Rafaël Carré for figuring out the bug.
>
> [1] https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>
> Signed-off-by: Ash Charles <ashcharles@gmail.com>
> ---
>   bitbake/lib/bb/fetch2/hg.py | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/bitbake/lib/bb/fetch2/hg.py b/bitbake/lib/bb/fetch2/hg.py
> index 81592f6..cab371f 100644
> --- a/bitbake/lib/bb/fetch2/hg.py
> +++ b/bitbake/lib/bb/fetch2/hg.py
> @@ -43,6 +43,13 @@ class Hg(FetchMethod):
>           """
>           return ud.type in ['hg']
>
> +    def supports_checksum(self, urldata):
> +        """
> +        Don't require checksums for local archives created from
> +        repository checkouts.
> +        """
> +        return False
> +
>       def urldata_init(self, ud, d):
>           """
>           init hg specific variable within url data
>

Re: [oe] [PATCH] fetch/hg: Disable checksums for archived downloads

[Ash Charles]

[-- Attachment #1: Type: text/plain, Size: 499 bytes --]

> I wonder how did you test the patch, please ? Did you revert the patch:
>  fetch/hg: support submodules ?
Hi Robert,
I tested the patch in a Yocto environment which had a prepopulated
downloads directory. In particular, I had seen the failure described [1]
for vim.
My version of bitbake was slightly older so the submodule patch that was
breaking the mirroring hadn't yet been applied.

[1]
https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html

--Ash

[-- Attachment #2: Type: text/html, Size: 638 bytes --]

Re: [bitbake-devel] [PATCH] fetch/hg: Disable checksums for archived downloads

[Ash Charles]

> I wonder how did you test the patch, please ? Did you revert the patch:
>  fetch/hg: support submodules ?
Hi Robert,
I tested the patch in a Yocto environment which had a prepopulated
downloads directory. In particular, I had seen the failure described [1]
for vim.
My version of bitbake was slightly older so the submodule patch that was
breaking the mirroring hadn't yet been applied.

[1]
https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html

--Ash

Re: [oe] [PATCH] fetch/hg: Disable checksums for archived downloads

[Martin Jansa]

[-- Attachment #1: Type: text/plain, Size: 3899 bytes --]

FWIW: I see vim unpack failing now in world builds:

NOTE: recipe vim-7.4.481-r0: task do_unpack: Started
ERROR: Function failed: Fetcher failure: Fetch command failed with
exit code 255, output:
abort: repository
/home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
not found!

ERROR: Logfile of failure stored in:
/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/temp/log.do_unpack.28505
Log data follows:
| DEBUG: Executing python function do_unpack
| DEBUG: Executing python function base_do_unpack
| DEBUG: Unpack: creating new hg repository in
'/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
| DEBUG: Running export
PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
export HOME="/home/jenkins"; /usr/bin/env hg init
/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim
| DEBUG: Unpack: updating source in
'/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
| DEBUG: Running export
PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
export HOME="/home/jenkins"; /usr/bin/env hg pull
/home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
| DEBUG: Python function base_do_unpack finished
| DEBUG: Python function do_unpack finished
| ERROR: Function failed: Fetcher failure: Fetch command failed with
exit code 255, output:
| abort: repository
/home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
not found!
|
NOTE: recipe vim-7.4.481-r0: task do_unpack: Failed
ERROR: Task 5789
(/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/vim/vim_7.4.481.bb,
do_unpack) failed with exit code '1'



On Fri, May 29, 2015 at 7:46 AM, Ash Charles <ashcharles@gmail.com> wrote:

> > I wonder how did you test the patch, please ? Did you revert the patch:
> >  fetch/hg: support submodules ?
> Hi Robert,
> I tested the patch in a Yocto environment which had a prepopulated
> downloads directory. In particular, I had seen the failure described [1]
> for vim.
> My version of bitbake was slightly older so the submodule patch that was
> breaking the mirroring hadn't yet been applied.
>
> [1]
> https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>
> --Ash
>
> --
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>
>

[-- Attachment #2: Type: text/html, Size: 5081 bytes --]

Re: [bitbake-devel] [PATCH] fetch/hg: Disable checksums for archived downloads

[Martin Jansa]

FWIW: I see vim unpack failing now in world builds:

NOTE: recipe vim-7.4.481-r0: task do_unpack: Started
ERROR: Function failed: Fetcher failure: Fetch command failed with
exit code 255, output:
abort: repository
/home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
not found!

ERROR: Logfile of failure stored in:
/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/temp/log.do_unpack.28505
Log data follows:
| DEBUG: Executing python function do_unpack
| DEBUG: Executing python function base_do_unpack
| DEBUG: Unpack: creating new hg repository in
'/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
| DEBUG: Running export
PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
export HOME="/home/jenkins"; /usr/bin/env hg init
/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim
| DEBUG: Unpack: updating source in
'/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
| DEBUG: Running export
PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
export HOME="/home/jenkins"; /usr/bin/env hg pull
/home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
| DEBUG: Python function base_do_unpack finished
| DEBUG: Python function do_unpack finished
| ERROR: Function failed: Fetcher failure: Fetch command failed with
exit code 255, output:
| abort: repository
/home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
not found!
|
NOTE: recipe vim-7.4.481-r0: task do_unpack: Failed
ERROR: Task 5789
(/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/vim/vim_7.4.481.bb,
do_unpack) failed with exit code '1'



On Fri, May 29, 2015 at 7:46 AM, Ash Charles <ashcharles@gmail.com> wrote:

> > I wonder how did you test the patch, please ? Did you revert the patch:
> >  fetch/hg: support submodules ?
> Hi Robert,
> I tested the patch in a Yocto environment which had a prepopulated
> downloads directory. In particular, I had seen the failure described [1]
> for vim.
> My version of bitbake was slightly older so the submodule patch that was
> breaking the mirroring hadn't yet been applied.
>
> [1]
> https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>
> --Ash
>
> --
> _______________________________________________
> bitbake-devel mailing list
> bitbake-devel@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>
>

Re: [oe] [PATCH] fetch/hg: Disable checksums for archived downloads

[Ash Charles]

Hi,

I verified that the "fetch/hg: support submodules" [1] patch, in
combination with this [2] patch is causing do_unpack failures for me.
Based on the logs from the world build, I suspect this is also
breaking dvb-apps.  I don't have a fix so perhaps the best plan is
reverting [2] now that cleanall for hg packages actually works.

[1] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005725.html
[2] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005758.html

--Ash

On Fri, May 29, 2015 at 2:18 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
> FWIW: I see vim unpack failing now in world builds:
>
> NOTE: recipe vim-7.4.481-r0: task do_unpack: Started
> ERROR: Function failed: Fetcher failure: Fetch command failed with exit code
> 255, output:
> abort: repository
> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
> found!
>
> ERROR: Logfile of failure stored in:
> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/temp/log.do_unpack.28505
> Log data follows:
> | DEBUG: Executing python function do_unpack
> | DEBUG: Executing python function base_do_unpack
> | DEBUG: Unpack: creating new hg repository in
> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
> | DEBUG: Running export
> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
> export HOME="/home/jenkins"; /usr/bin/env hg init
> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim
> | DEBUG: Unpack: updating source in
> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
> | DEBUG: Running export
> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
> export HOME="/home/jenkins"; /usr/bin/env hg pull
> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
> | DEBUG: Python function base_do_unpack finished
> | DEBUG: Python function do_unpack finished
> | ERROR: Function failed: Fetcher failure: Fetch command failed with exit
> code 255, output:
> | abort: repository
> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
> found!
> |
> NOTE: recipe vim-7.4.481-r0: task do_unpack: Failed
> ERROR: Task 5789
> (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/vim/vim_7.4.481.bb,
> do_unpack) failed with exit code '1'
>
>
>
> On Fri, May 29, 2015 at 7:46 AM, Ash Charles <ashcharles@gmail.com> wrote:
>>
>> > I wonder how did you test the patch, please ? Did you revert the patch:
>> >  fetch/hg: support submodules ?
>> Hi Robert,
>> I tested the patch in a Yocto environment which had a prepopulated
>> downloads directory. In particular, I had seen the failure described [1] for
>> vim.
>> My version of bitbake was slightly older so the submodule patch that was
>> breaking the mirroring hadn't yet been applied.
>>
>> [1]
>> https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>>
>> --Ash
>>
>>
>> --
>> _______________________________________________
>> bitbake-devel mailing list
>> bitbake-devel@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>>
>

Re: [bitbake-devel] [PATCH] fetch/hg: Disable checksums for archived downloads

[Ash Charles]

Hi,

I verified that the "fetch/hg: support submodules" [1] patch, in
combination with this [2] patch is causing do_unpack failures for me.
Based on the logs from the world build, I suspect this is also
breaking dvb-apps.  I don't have a fix so perhaps the best plan is
reverting [2] now that cleanall for hg packages actually works.

[1] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005725.html
[2] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005758.html

--Ash

On Fri, May 29, 2015 at 2:18 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
> FWIW: I see vim unpack failing now in world builds:
>
> NOTE: recipe vim-7.4.481-r0: task do_unpack: Started
> ERROR: Function failed: Fetcher failure: Fetch command failed with exit code
> 255, output:
> abort: repository
> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
> found!
>
> ERROR: Logfile of failure stored in:
> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/temp/log.do_unpack.28505
> Log data follows:
> | DEBUG: Executing python function do_unpack
> | DEBUG: Executing python function base_do_unpack
> | DEBUG: Unpack: creating new hg repository in
> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
> | DEBUG: Running export
> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
> export HOME="/home/jenkins"; /usr/bin/env hg init
> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim
> | DEBUG: Unpack: updating source in
> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
> | DEBUG: Running export
> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
> export HOME="/home/jenkins"; /usr/bin/env hg pull
> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
> | DEBUG: Python function base_do_unpack finished
> | DEBUG: Python function do_unpack finished
> | ERROR: Function failed: Fetcher failure: Fetch command failed with exit
> code 255, output:
> | abort: repository
> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
> found!
> |
> NOTE: recipe vim-7.4.481-r0: task do_unpack: Failed
> ERROR: Task 5789
> (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/vim/vim_7.4.481.bb,
> do_unpack) failed with exit code '1'
>
>
>
> On Fri, May 29, 2015 at 7:46 AM, Ash Charles <ashcharles@gmail.com> wrote:
>>
>> > I wonder how did you test the patch, please ? Did you revert the patch:
>> >  fetch/hg: support submodules ?
>> Hi Robert,
>> I tested the patch in a Yocto environment which had a prepopulated
>> downloads directory. In particular, I had seen the failure described [1] for
>> vim.
>> My version of bitbake was slightly older so the submodule patch that was
>> breaking the mirroring hadn't yet been applied.
>>
>> [1]
>> https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>>
>> --Ash
>>
>>
>> --
>> _______________________________________________
>> bitbake-devel mailing list
>> bitbake-devel@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>>
>

Re: [oe] [PATCH] fetch/hg: Disable checksums for archived downloads

[Robert Yang]

On 06/02/2015 08:08 AM, Ash Charles wrote:
> Hi,
>
> I verified that the "fetch/hg: support submodules" [1] patch, in
> combination with this [2] patch is causing do_unpack failures for me.
> Based on the logs from the world build, I suspect this is also
> breaking dvb-apps.  I don't have a fix so perhaps the best plan is
> reverting [2] now that cleanall for hg packages actually works.
>
> [1] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005725.html
> [2] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005758.html
>

I'm working on fixing the issues now, will send patches sooner.

// Robert

> --Ash
>
> On Fri, May 29, 2015 at 2:18 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
>> FWIW: I see vim unpack failing now in world builds:
>>
>> NOTE: recipe vim-7.4.481-r0: task do_unpack: Started
>> ERROR: Function failed: Fetcher failure: Fetch command failed with exit code
>> 255, output:
>> abort: repository
>> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
>> found!
>>
>> ERROR: Logfile of failure stored in:
>> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/temp/log.do_unpack.28505
>> Log data follows:
>> | DEBUG: Executing python function do_unpack
>> | DEBUG: Executing python function base_do_unpack
>> | DEBUG: Unpack: creating new hg repository in
>> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
>> | DEBUG: Running export
>> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
>> export HOME="/home/jenkins"; /usr/bin/env hg init
>> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim
>> | DEBUG: Unpack: updating source in
>> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
>> | DEBUG: Running export
>> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
>> export HOME="/home/jenkins"; /usr/bin/env hg pull
>> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
>> | DEBUG: Python function base_do_unpack finished
>> | DEBUG: Python function do_unpack finished
>> | ERROR: Function failed: Fetcher failure: Fetch command failed with exit
>> code 255, output:
>> | abort: repository
>> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
>> found!
>> |
>> NOTE: recipe vim-7.4.481-r0: task do_unpack: Failed
>> ERROR: Task 5789
>> (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/vim/vim_7.4.481.bb,
>> do_unpack) failed with exit code '1'
>>
>>
>>
>> On Fri, May 29, 2015 at 7:46 AM, Ash Charles <ashcharles@gmail.com> wrote:
>>>
>>>> I wonder how did you test the patch, please ? Did you revert the patch:
>>>>   fetch/hg: support submodules ?
>>> Hi Robert,
>>> I tested the patch in a Yocto environment which had a prepopulated
>>> downloads directory. In particular, I had seen the failure described [1] for
>>> vim.
>>> My version of bitbake was slightly older so the submodule patch that was
>>> breaking the mirroring hadn't yet been applied.
>>>
>>> [1]
>>> https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>>>
>>> --Ash
>>>
>>>
>>> --
>>> _______________________________________________
>>> bitbake-devel mailing list
>>> bitbake-devel@lists.openembedded.org
>>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>>>
>>
>
>

Re: [bitbake-devel] [PATCH] fetch/hg: Disable checksums for archived downloads

[Robert Yang]

On 06/02/2015 08:08 AM, Ash Charles wrote:
> Hi,
>
> I verified that the "fetch/hg: support submodules" [1] patch, in
> combination with this [2] patch is causing do_unpack failures for me.
> Based on the logs from the world build, I suspect this is also
> breaking dvb-apps.  I don't have a fix so perhaps the best plan is
> reverting [2] now that cleanall for hg packages actually works.
>
> [1] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005725.html
> [2] http://lists.openembedded.org/pipermail/bitbake-devel/2015-May/005758.html
>

I'm working on fixing the issues now, will send patches sooner.

// Robert

> --Ash
>
> On Fri, May 29, 2015 at 2:18 AM, Martin Jansa <martin.jansa@gmail.com> wrote:
>> FWIW: I see vim unpack failing now in world builds:
>>
>> NOTE: recipe vim-7.4.481-r0: task do_unpack: Started
>> ERROR: Function failed: Fetcher failure: Fetch command failed with exit code
>> 255, output:
>> abort: repository
>> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
>> found!
>>
>> ERROR: Logfile of failure stored in:
>> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/temp/log.do_unpack.28505
>> Log data follows:
>> | DEBUG: Executing python function do_unpack
>> | DEBUG: Executing python function base_do_unpack
>> | DEBUG: Unpack: creating new hg repository in
>> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
>> | DEBUG: Running export
>> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
>> export HOME="/home/jenkins"; /usr/bin/env hg init
>> /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim
>> | DEBUG: Unpack: updating source in
>> '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/vim/7.4.481-r0/vim'
>> | DEBUG: Running export
>> PATH="/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/arm-oe-linux-gnueabi:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm/usr/bin/crossscripts:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/sbin:/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/bin:/home/jenkins/oe/world/shr-core/openembedded-core/scripts:/home/jenkins/oe/world/shr-core/bitbake/bin:/home/jenkins/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games";
>> export HOME="/home/jenkins"; /usr/bin/env hg pull
>> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim
>> | DEBUG: Python function base_do_unpack finished
>> | DEBUG: Python function do_unpack finished
>> | ERROR: Function failed: Fetcher failure: Fetch command failed with exit
>> code 255, output:
>> | abort: repository
>> /home/jenkins/oe/world/shr-core/downloads/hg/vim.googlecode.com/hg/vim not
>> found!
>> |
>> NOTE: recipe vim-7.4.481-r0: task do_unpack: Failed
>> ERROR: Task 5789
>> (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/vim/vim_7.4.481.bb,
>> do_unpack) failed with exit code '1'
>>
>>
>>
>> On Fri, May 29, 2015 at 7:46 AM, Ash Charles <ashcharles@gmail.com> wrote:
>>>
>>>> I wonder how did you test the patch, please ? Did you revert the patch:
>>>>   fetch/hg: support submodules ?
>>> Hi Robert,
>>> I tested the patch in a Yocto environment which had a prepopulated
>>> downloads directory. In particular, I had seen the failure described [1] for
>>> vim.
>>> My version of bitbake was slightly older so the submodule patch that was
>>> breaking the mirroring hadn't yet been applied.
>>>
>>> [1]
>>> https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg41328.html
>>>
>>> --Ash
>>>
>>>
>>> --
>>> _______________________________________________
>>> bitbake-devel mailing list
>>> bitbake-devel@lists.openembedded.org
>>> http://lists.openembedded.org/mailman/listinfo/bitbake-devel
>>>
>>
>
>

Re: [oe] [PATCH] fetch/hg: Disable checksums for archived downloads

[Steffen Sledz]

On 02.06.2015 06:38, Robert Yang wrote:
> I'm working on fixing the issues now, will send patches sooner.

Any news on that?

-- 
DResearch Fahrzeugelektronik GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 30 515932-237 mailto:sledz@dresearch-fe.de
Fax: +49 30 515932-299
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 130120 B;
Ust.-IDNr. DE273952058

Re: [bitbake-devel] [PATCH] fetch/hg: Disable checksums for archived downloads

[Steffen Sledz]

On 02.06.2015 06:38, Robert Yang wrote:
> I'm working on fixing the issues now, will send patches sooner.

Any news on that?

-- 
DResearch Fahrzeugelektronik GmbH
Otto-Schmirgal-Str. 3, 10319 Berlin, Germany
Tel: +49 30 515932-237 mailto:sledz@dresearch-fe.de
Fax: +49 30 515932-299
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 130120 B;
Ust.-IDNr. DE273952058

[meta-oe][PATCH] vim: add checksum

[Rafaël Carré]

---
 meta-oe/recipes-support/vim/vim_7.4.481.bb | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/meta-oe/recipes-support/vim/vim_7.4.481.bb b/meta-oe/recipes-support/vim/vim_7.4.481.bb
index afdea84..ac59077 100644
--- a/meta-oe/recipes-support/vim/vim_7.4.481.bb
+++ b/meta-oe/recipes-support/vim/vim_7.4.481.bb
@@ -10,6 +10,10 @@ SRC_URI = "hg://vim.googlecode.com/hg/;protocol=https;module=vim \
            file://disable_acl_header_check.patch;patchdir=.. \
            file://vim-add-knob-whether-elf.h-are-checked.patch;patchdir=.. \
 "
+
+SRC_URI[md5sum] = "5fd5d754581a673a25733c12367cf9d2"
+SRC_URI[sha256sum] = "e2cc416dabea503e9e5631afc21bb00dcbfb9d05481641b75f247fd89ff4d7e8"
+
 SRCREV = "v7-4-481"
 
 S = "${WORKDIR}/vim/src"
-- 
2.1.0