From: Stas Sergeev <stsp@list.ru>
To: netdev@vger.kernel.org
Cc: Rami Rosen <rosenr@marvell.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Subject: [PATCH 6/6] mvneta: port marvell's official in-band status enabling procedure
Date: Thu, 26 Mar 2015 19:04:43 +0300 [thread overview]
Message-ID: <55142E1B.1000305@list.ru> (raw)
In-Reply-To: <55142DD4.9060004@list.ru>
-=-=-=-=-=-=-=-=-=# Don't remove this line #=-=-=-=-=-=-=-=-=-
This is a back-port of official marvell's patch.
It changes nothing visible for me but looks reasonable.
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net>
---
drivers/net/ethernet/marvell/mvneta.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c
b/drivers/net/ethernet/marvell/mvneta.c
index 44d2655..5dc7416 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -100,6 +100,8 @@
#define MVNETA_TXQ_CMD 0x2448
#define MVNETA_TXQ_DISABLE_SHIFT 8
#define MVNETA_TXQ_ENABLE_MASK 0x000000ff
+#define MVNETA_GMAC_CLOCK_DIVIDER 0x24f4
+#define MVNETA_GMAC_1MS_CLOCK_ENABLE BIT(31)
#define MVNETA_ACC_MODE 0x2500
#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
@@ -166,6 +168,7 @@
#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
#define MVNETA_GMAC_CTRL_2 0x2c08
+#define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
#define MVNETA_GMAC2_PORT_RGMII BIT(4)
#define MVNETA_GMAC2_PORT_RESET BIT(6)
@@ -1001,12 +1004,15 @@ static void mvneta_defaults_set(struct
mvneta_port *pp)
if (pp->inband_status) {
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_FORCE_LINK_DOWN);
+ MVNETA_GMAC_FORCE_LINK_DOWN |
+ MVNETA_GMAC_AN_FLOW_CTRL_EN);
val |= MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_FLOW_CTRL_EN |
MVNETA_GMAC_AN_DUPLEX_EN;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
}
mvneta_set_ucast_table(pp, -1);
@@ -2979,6 +2985,9 @@ static int mvneta_port_power_up(struct mvneta_port
*pp, int phy_mode)
return -EINVAL;
}
+ if (pp->inband_status)
+ ctrl |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+
/* Cancel Port Reset */
ctrl &= ~MVNETA_GMAC2_PORT_RESET;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
--
1.7.9.5
next prev parent reply other threads:[~2015-03-26 16:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-26 15:56 [PATCH 0/6] mvneta: SGMII-based in-band link status signaling Stas Sergeev
2015-03-26 15:58 ` [PATCH 1/6] restructure of_phy_register_fixed_link() for further modifications Stas Sergeev
2015-03-26 16:00 ` [PATCH 2/6] pass phy_device instead of net_device to fixed_phy link_update() function Stas Sergeev
2015-03-26 16:01 ` [PATCH 3/6] fixed_phy: add fixed_phy_unregister() Stas Sergeev
2015-03-26 16:02 ` [PATCH 4/6] of: add API for changing parameters of fixed link Stas Sergeev
2015-03-26 16:03 ` [PATCH 5/6] mvneta: implement SGMII-based in-band link status signaling Stas Sergeev
2015-03-26 16:04 ` Stas Sergeev [this message]
2015-03-26 22:49 ` [PATCH 2/6] pass phy_device instead of net_device to fixed_phy link_update() function David Miller
2015-03-26 22:55 ` Stas Sergeev
2015-03-26 22:59 ` Thomas Petazzoni
2015-03-26 19:01 ` [PATCH 1/6] restructure of_phy_register_fixed_link() for further modifications Sergei Shtylyov
2015-03-26 20:26 ` Stas Sergeev
2015-03-26 17:13 ` [PATCH 0/6] mvneta: SGMII-based in-band link status signaling Florian Fainelli
2015-03-26 17:23 ` Stas Sergeev
2015-03-26 17:29 ` Florian Fainelli
2015-03-26 17:34 ` Stas Sergeev
-- strict thread matches above, loose matches on Subject: below --
2015-03-27 13:28 [PATCH 0/6] mvneta: SGMII-based in-band link state signaling Stas Sergeev
2015-03-27 13:40 ` [PATCH 6/6] mvneta: port marvell's official in-band status enabling procedure Stas Sergeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55142E1B.1000305@list.ru \
--to=stsp@list.ru \
--cc=netdev@vger.kernel.org \
--cc=rosenr@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.