From: Richard Henderson <rth@twiddle.net>
To: "Emilio G. Cota" <cota@braap.org>, Stefan Weil <sw@weilnetz.de>
Cc: qemu-trivial@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-trivial] [PATCH] tcg: optimise memory layout of TCGTemp
Date: Fri, 27 Mar 2015 07:58:06 -0700 [thread overview]
Message-ID: <55156FFE.9050806@twiddle.net> (raw)
In-Reply-To: <1427313048-26772-1-git-send-email-cota@braap.org>
On 03/25/2015 12:50 PM, Emilio G. Cota wrote:
> This brings down the size of the struct from 56 to 32 bytes on 64-bit,
> and to 16 bytes on 32-bit.
>
> The appended adds macros to prevent us from mistakenly overflowing
> the bitfields when more elements are added to the corresponding
> enums/macros.
>
> Note that reg/mem_reg need only 6 bits (for ia64) but for performance
> is probably better to align them to a byte address.
>
> Given that TCGTemp is used in large arrays this leads to a few KBs
> of savings. However, unpacking the bits takes additional code, so
> the net effect depends on the target (host is x86_64):
>
> Before:
> $ find . -name 'tcg.o' | xargs size
> text data bss dec hex filename
> 41131 29800 88 71019 1156b ./aarch64-softmmu/tcg/tcg.o
> 37969 29416 96 67481 10799 ./x86_64-linux-user/tcg/tcg.o
> 39354 28816 96 68266 10aaa ./arm-linux-user/tcg/tcg.o
> 40802 29096 88 69986 11162 ./arm-softmmu/tcg/tcg.o
> 39417 29672 88 69177 10e39 ./x86_64-softmmu/tcg/tcg.o
>
> After:
> $ find . -name 'tcg.o' | xargs size
> text data bss dec hex filename
> 41187 29800 88 71075 115a3 ./aarch64-softmmu/tcg/tcg.o
> 37777 29416 96 67289 106d9 ./x86_64-linux-user/tcg/tcg.o
> 39162 28816 96 68074 109ea ./arm-linux-user/tcg/tcg.o
> 40858 29096 88 70042 1119a ./arm-softmmu/tcg/tcg.o
> 39473 29672 88 69233 10e71 ./x86_64-softmmu/tcg/tcg.o
>
> Suggested-by: Stefan Weil <sw@weilnetz.de>
> Suggested-by: Richard Henderson <rth@twiddle.net>
> Signed-off-by: Emilio G. Cota <cota@braap.org>
> ---
> tcg/tcg.h | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/tcg/tcg.h b/tcg/tcg.h
> index add7f75..71ae7b2 100644
> --- a/tcg/tcg.h
> +++ b/tcg/tcg.h
> @@ -193,7 +193,7 @@ typedef struct TCGPool {
> typedef enum TCGType {
> TCG_TYPE_I32,
> TCG_TYPE_I64,
> - TCG_TYPE_COUNT, /* number of different types */
> + TCG_TYPE_COUNT, /* number of different types, see TCG_TYPE_NR_BITS */
>
> /* An alias for the size of the host register. */
> #if TCG_TARGET_REG_BITS == 32
> @@ -217,6 +217,9 @@ typedef enum TCGType {
> #endif
> } TCGType;
>
> +/* used for bitfield packing to save space */
> +#define TCG_TYPE_NR_BITS 1
I'd rather you moved TCG_TYPE_COUNT out of the enum and into a define. Perhaps
even as (1 << TCG_TYPE_NR_BITS).
> @@ -421,16 +424,14 @@ static inline TCGCond tcg_high_cond(TCGCond c)
> #define TEMP_VAL_REG 1
> #define TEMP_VAL_MEM 2
> #define TEMP_VAL_CONST 3
> +#define TEMP_VAL_NR_BITS 2
And make this an enumeration.
> typedef struct TCGTemp {
> - TCGType base_type;
> - TCGType type;
> - int val_type;
> - int reg;
> - tcg_target_long val;
> - int mem_reg;
> - intptr_t mem_offset;
> + unsigned int reg:8;
> + unsigned int mem_reg:8;
> + unsigned int val_type:TEMP_VAL_NR_BITS;
> + unsigned int base_type:TCG_TYPE_NR_BITS;
> + unsigned int type:TCG_TYPE_NR_BITS;
And do *not* change these from the enumeration to an unsigned int.
I know why you did this -- to keep the compiler from warning that the TCGType
enum didn't fit in the bitfield, because of TCG_TYPE_COUNT being an enumerator,
rather than an unrelated number. Except that's exactly the warning we want to
keep, on the off-chance that someone modifies the enums without modifying the
_NR_BITS defines.
r~
WARNING: multiple messages have this Message-ID (diff)
From: Richard Henderson <rth@twiddle.net>
To: "Emilio G. Cota" <cota@braap.org>, Stefan Weil <sw@weilnetz.de>
Cc: qemu-trivial@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] tcg: optimise memory layout of TCGTemp
Date: Fri, 27 Mar 2015 07:58:06 -0700 [thread overview]
Message-ID: <55156FFE.9050806@twiddle.net> (raw)
In-Reply-To: <1427313048-26772-1-git-send-email-cota@braap.org>
On 03/25/2015 12:50 PM, Emilio G. Cota wrote:
> This brings down the size of the struct from 56 to 32 bytes on 64-bit,
> and to 16 bytes on 32-bit.
>
> The appended adds macros to prevent us from mistakenly overflowing
> the bitfields when more elements are added to the corresponding
> enums/macros.
>
> Note that reg/mem_reg need only 6 bits (for ia64) but for performance
> is probably better to align them to a byte address.
>
> Given that TCGTemp is used in large arrays this leads to a few KBs
> of savings. However, unpacking the bits takes additional code, so
> the net effect depends on the target (host is x86_64):
>
> Before:
> $ find . -name 'tcg.o' | xargs size
> text data bss dec hex filename
> 41131 29800 88 71019 1156b ./aarch64-softmmu/tcg/tcg.o
> 37969 29416 96 67481 10799 ./x86_64-linux-user/tcg/tcg.o
> 39354 28816 96 68266 10aaa ./arm-linux-user/tcg/tcg.o
> 40802 29096 88 69986 11162 ./arm-softmmu/tcg/tcg.o
> 39417 29672 88 69177 10e39 ./x86_64-softmmu/tcg/tcg.o
>
> After:
> $ find . -name 'tcg.o' | xargs size
> text data bss dec hex filename
> 41187 29800 88 71075 115a3 ./aarch64-softmmu/tcg/tcg.o
> 37777 29416 96 67289 106d9 ./x86_64-linux-user/tcg/tcg.o
> 39162 28816 96 68074 109ea ./arm-linux-user/tcg/tcg.o
> 40858 29096 88 70042 1119a ./arm-softmmu/tcg/tcg.o
> 39473 29672 88 69233 10e71 ./x86_64-softmmu/tcg/tcg.o
>
> Suggested-by: Stefan Weil <sw@weilnetz.de>
> Suggested-by: Richard Henderson <rth@twiddle.net>
> Signed-off-by: Emilio G. Cota <cota@braap.org>
> ---
> tcg/tcg.h | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/tcg/tcg.h b/tcg/tcg.h
> index add7f75..71ae7b2 100644
> --- a/tcg/tcg.h
> +++ b/tcg/tcg.h
> @@ -193,7 +193,7 @@ typedef struct TCGPool {
> typedef enum TCGType {
> TCG_TYPE_I32,
> TCG_TYPE_I64,
> - TCG_TYPE_COUNT, /* number of different types */
> + TCG_TYPE_COUNT, /* number of different types, see TCG_TYPE_NR_BITS */
>
> /* An alias for the size of the host register. */
> #if TCG_TARGET_REG_BITS == 32
> @@ -217,6 +217,9 @@ typedef enum TCGType {
> #endif
> } TCGType;
>
> +/* used for bitfield packing to save space */
> +#define TCG_TYPE_NR_BITS 1
I'd rather you moved TCG_TYPE_COUNT out of the enum and into a define. Perhaps
even as (1 << TCG_TYPE_NR_BITS).
> @@ -421,16 +424,14 @@ static inline TCGCond tcg_high_cond(TCGCond c)
> #define TEMP_VAL_REG 1
> #define TEMP_VAL_MEM 2
> #define TEMP_VAL_CONST 3
> +#define TEMP_VAL_NR_BITS 2
And make this an enumeration.
> typedef struct TCGTemp {
> - TCGType base_type;
> - TCGType type;
> - int val_type;
> - int reg;
> - tcg_target_long val;
> - int mem_reg;
> - intptr_t mem_offset;
> + unsigned int reg:8;
> + unsigned int mem_reg:8;
> + unsigned int val_type:TEMP_VAL_NR_BITS;
> + unsigned int base_type:TCG_TYPE_NR_BITS;
> + unsigned int type:TCG_TYPE_NR_BITS;
And do *not* change these from the enumeration to an unsigned int.
I know why you did this -- to keep the compiler from warning that the TCGType
enum didn't fit in the bitfield, because of TCG_TYPE_COUNT being an enumerator,
rather than an unrelated number. Except that's exactly the warning we want to
keep, on the off-chance that someone modifies the enums without modifying the
_NR_BITS defines.
r~
next prev parent reply other threads:[~2015-03-27 14:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-21 6:27 [Qemu-trivial] [PATCH] tcg: pack TCGTemp to reduce size by 8 bytes Emilio G. Cota
2015-03-21 6:27 ` [Qemu-devel] " Emilio G. Cota
2015-03-23 21:42 ` [Qemu-trivial] " Stefan Weil
2015-03-23 21:42 ` Stefan Weil
2015-03-24 1:07 ` [Qemu-trivial] " Richard Henderson
2015-03-24 1:07 ` Richard Henderson
2015-03-25 19:50 ` [Qemu-trivial] [PATCH] tcg: optimise memory layout of TCGTemp Emilio G. Cota
2015-03-25 19:50 ` [Qemu-devel] " Emilio G. Cota
2015-03-27 9:55 ` [Qemu-trivial] " Alex Bennée
2015-03-27 9:55 ` Alex Bennée
2015-03-27 21:09 ` [Qemu-trivial] " Emilio G. Cota
2015-03-27 21:09 ` Emilio G. Cota
2015-03-30 9:55 ` [Qemu-trivial] " Laurent Desnogues
2015-03-30 9:55 ` Laurent Desnogues
2015-03-27 14:58 ` Richard Henderson [this message]
2015-03-27 14:58 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55156FFE.9050806@twiddle.net \
--to=rth@twiddle.net \
--cc=cota@braap.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=sw@weilnetz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.