* [lm-sensors] Call for testing: Driver for IT8620E, IT8790E @ 2015-03-30 6:41 Guenter Roeck 2015-03-30 7:12 ` Alexander Bruns 2015-04-03 16:18 ` Pavel Rojtberg 0 siblings, 2 replies; 3+ messages in thread From: Guenter Roeck @ 2015-03-30 6:41 UTC (permalink / raw) To: lm-sensors Greetings: We now have an experimental driver which supports both IT8620E and IT8790E. The driver is available from the following url. https://github.com/groeck/it87 This driver supports IT8620E and IT8790E with all known chip specialties. New features are: - Support for IT8620E, including up to 6 fan tachometers and up to 6 pwm controls - Support for IT8790E - Support for Super-IO chips at SIO address 0x4e (needed for some Gigabytye boards) - Support for two Super-IO chips in the system at the same time (needed for some Gigabyte boards) This code will need extensive testing to be able to upstream it. I would kindly ask everyone who has a board with IT8620E and/or IT8790E to install the driver and test it, and to report the results on the lm-sensors mailing list. Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] Call for testing: Driver for IT8620E, IT8790E 2015-03-30 6:41 [lm-sensors] Call for testing: Driver for IT8620E, IT8790E Guenter Roeck @ 2015-03-30 7:12 ` Alexander Bruns 2015-04-03 16:18 ` Pavel Rojtberg 1 sibling, 0 replies; 3+ messages in thread From: Alexander Bruns @ 2015-03-30 7:12 UTC (permalink / raw) To: lm-sensors Hi, so for me, who tested it for Guenther, it looks ok. Here the outcome of sensors: holodeck ~ # sensors acpitz-virtual-0 Adapter: Virtual device temp1: +27.8°C (crit = +105.0°C) temp2: +29.8°C (crit = +105.0°C) it8620-isa-0a30 Adapter: ISA adapter in0: +0.01 V (min = +0.00 V, max = +3.06 V) in1: +2.03 V (min = +0.00 V, max = +3.06 V) in2: +2.03 V (min = +0.00 V, max = +3.06 V) in3: +2.00 V (min = +0.00 V, max = +3.06 V) in4: +0.01 V (min = +0.00 V, max = +3.06 V) in5: +1.73 V (min = +0.00 V, max = +3.06 V) in6: +1.51 V (min = +0.00 V, max = +3.06 V) 3VSB: +3.38 V (min = +0.00 V, max = +6.12 V) Vbat: +2.98 V +3.3V: +2.83 V fan1: 614 RPM (min = 10 RPM) fan2: 594 RPM (min = 10 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +33.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +50.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp3: -128.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI intrusion0: ALARM it8790-isa-0a40 Adapter: ISA adapter in0: +0.06 V (min = +0.00 V, max = +3.06 V) in1: +0.06 V (min = +0.00 V, max = +3.06 V) in2: +0.06 V (min = +0.00 V, max = +3.06 V) +3.3V: +3.70 V (min = +0.00 V, max = +6.12 V) in4: +0.06 V (min = +0.00 V, max = +3.06 V) in5: +1.08 V (min = +0.00 V, max = +3.06 V) in6: +3.06 V (min = +0.00 V, max = +3.06 V) ALARM 3VSB: +3.67 V (min = +0.00 V, max = +6.12 V) Vbat: +3.43 V fan1: 453 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 10 RPM) ALARM temp1: +23.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI temp2: +33.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp3: +51.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor intrusion0: ALARM MB like sensors-detects it: holodeck ~ # sensors-detect # sensors-detect revision 6170 (2013-05-20 21:25:22 +0200) # System: Gigabyte Technology Co., Ltd. Z97X-Gaming G1 WIFI-BK Many thx an Guenther for his good work. Alex Am 30.03.2015 um 08:41 schrieb Guenter Roeck: > Greetings: > > We now have an experimental driver which supports both IT8620E and IT8790E. > The driver is available from the following url. > > https://github.com/groeck/it87 > > This driver supports IT8620E and IT8790E with all known chip specialties. > New features are: > > - Support for IT8620E, including up to 6 fan tachometers and up to 6 pwm > controls > - Support for IT8790E > - Support for Super-IO chips at SIO address 0x4e (needed for some > Gigabytye boards) > - Support for two Super-IO chips in the system at the same time (needed > for some > Gigabyte boards) > > This code will need extensive testing to be able to upstream it. > I would kindly ask everyone who has a board with IT8620E and/or IT8790E > to install the driver and test it, and to report the results on the > lm-sensors mailing list. > > Thanks, > Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] Call for testing: Driver for IT8620E, IT8790E 2015-03-30 6:41 [lm-sensors] Call for testing: Driver for IT8620E, IT8790E Guenter Roeck 2015-03-30 7:12 ` Alexander Bruns @ 2015-04-03 16:18 ` Pavel Rojtberg 1 sibling, 0 replies; 3+ messages in thread From: Pavel Rojtberg @ 2015-04-03 16:18 UTC (permalink / raw) To: lm-sensors Y29ycmVjdGx5IGRldGVjdHMgdGhlICJJVDg2MjBFIiBvbiBteSBHQS1IOTdOIGFuZCAgd29ya3Mg anVzdCBhcyAiaXQ4Nwpmb3JjZV9pZD0weDg3MjgiIHVzZWQgdG8uCgpHdWVudGVyIFJvZWNrIDxs aW51eEByb2Vjay11cy5uZXQ+IHNjaHJpZWIgYW0gTW8uLCAzMC4gTcOkcnogMjAxNSB1bQowODo0 MSBVaHI6Cgo+IEdyZWV0aW5nczoKPgo+IFdlIG5vdyBoYXZlIGFuIGV4cGVyaW1lbnRhbCBkcml2 ZXIgd2hpY2ggc3VwcG9ydHMgYm90aCBJVDg2MjBFIGFuZCBJVDg3OTBFLgo+IFRoZSBkcml2ZXIg aXMgYXZhaWxhYmxlIGZyb20gdGhlIGZvbGxvd2luZyB1cmwuCj4KPiAgICAgICAgIGh0dHBzOi8v Z2l0aHViLmNvbS9ncm9lY2svaXQ4Nwo+Cj4gVGhpcyBkcml2ZXIgc3VwcG9ydHMgSVQ4NjIwRSBh bmQgSVQ4NzkwRSB3aXRoIGFsbCBrbm93biBjaGlwIHNwZWNpYWx0aWVzLgo+IE5ldyBmZWF0dXJl cyBhcmU6Cj4KPiAtIFN1cHBvcnQgZm9yIElUODYyMEUsIGluY2x1ZGluZyB1cCB0byA2IGZhbiB0 YWNob21ldGVycyBhbmQgdXAgdG8gNiBwd20KPiBjb250cm9scwo+IC0gU3VwcG9ydCBmb3IgSVQ4 NzkwRQo+IC0gU3VwcG9ydCBmb3IgU3VwZXItSU8gY2hpcHMgYXQgU0lPIGFkZHJlc3MgMHg0ZSAo bmVlZGVkIGZvciBzb21lCj4gR2lnYWJ5dHllIGJvYXJkcykKPiAtIFN1cHBvcnQgZm9yIHR3byBT dXBlci1JTyBjaGlwcyBpbiB0aGUgc3lzdGVtIGF0IHRoZSBzYW1lIHRpbWUgKG5lZWRlZAo+IGZv ciBzb21lCj4gICAgR2lnYWJ5dGUgYm9hcmRzKQo+Cj4gVGhpcyBjb2RlIHdpbGwgbmVlZCBleHRl bnNpdmUgdGVzdGluZyB0byBiZSBhYmxlIHRvIHVwc3RyZWFtIGl0Lgo+IEkgd291bGQga2luZGx5 IGFzayBldmVyeW9uZSB3aG8gaGFzIGEgYm9hcmQgd2l0aCBJVDg2MjBFIGFuZC9vciBJVDg3OTBF Cj4gdG8gaW5zdGFsbCB0aGUgZHJpdmVyIGFuZCB0ZXN0IGl0LCBhbmQgdG8gcmVwb3J0IHRoZSBy ZXN1bHRzIG9uIHRoZQo+IGxtLXNlbnNvcnMgbWFpbGluZyBsaXN0Lgo+Cj4gVGhhbmtzLAo+IEd1 ZW50ZXIKPgpfX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fXwps bS1zZW5zb3JzIG1haWxpbmcgbGlzdApsbS1zZW5zb3JzQGxtLXNlbnNvcnMub3JnCmh0dHA6Ly9s aXN0cy5sbS1zZW5zb3JzLm9yZy9tYWlsbWFuL2xpc3RpbmZvL2xtLXNlbnNvcnM ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-04-03 16:18 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-03-30 6:41 [lm-sensors] Call for testing: Driver for IT8620E, IT8790E Guenter Roeck 2015-03-30 7:12 ` Alexander Bruns 2015-04-03 16:18 ` Pavel Rojtberg
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.