Re: d63e2e1f3df breaks sparc/T5-8

[David Ahern <david.ahern@oracle.com>]

On 3/29/15 2:07 PM, Yinghai Lu wrote:
> [  286.647560] PCI: scan_bus[/pci@300/pci@1/pci@0/pci@6] bus no 8
> [  286.921232] PCI: Claiming 0000:00:01.0: Resource 15:
> 0000800100000000..00008004afffffff [220c]
> [  287.229190] PCI: Claiming 0000:01:00.0: Resource 15:
> 0000800100000000..00008004afffffff [220c]
> [  287.533428] PCI: Claiming 0000:02:04.0: Resource 15:
> 0000800100000000..000080012fffffff [220c]
> [  288.149831] PCI: Claiming 0000:03:00.0: Resource 15:
> 0000800100000000..000080012fffffff [220c]
> [  288.252466] PCI: Claiming 0000:04:06.0: Resource 14:
> 0000800100000000..000080010fffffff [220c]
> [  288.867196] PCI: Claiming 0000:05:00.0: Resource 0:
> 0000800100000000..0000800100001fff [204]
> [  288.968221] pci 0000:05:00.0: can't claim BAR 0 [mem
> 0x800100000000-0x800100001fff]: no compatible bridge window
>
> the bridge resource has IORESOURCE_PREFETCH, but the device doesn't have that.
>
> So pci_claim_resource can not find parent resource for device
> resource: we can not
> put non pref mem under pref mem.
>
> Can you send out result from ?
> lspci -vvxxx -s 0000:05:00.0

# lspci -vvxxx -s 0000:05:00.0
0000:05:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 
Host Controller (rev 03) (prog-if 30 [XHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 00000004
	Region 0: Memory at 100000000 (64-bit, non-prefetchable) [size=8K]
	Region 2: [virtual] Memory at ffff800000000000 (32-bit, non-prefetchable)
	Region 3: [virtual] Memory at ffff800000000000 (32-bit, non-prefetchable)
	Region 4: [virtual] Memory at ffff800000000000 (32-bit, non-prefetchable)
	Region 5: [virtual] Memory at ffff800000000000 (32-bit, non-prefetchable)
	[virtual] Expansion ROM at ffff800000000000 [disabled]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
		Vector table: BAR=0 offset=00001000
		PBA: BAR=0 offset=00001080
	Capabilities: [a0] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 
unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, 
L1 unlimited
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- 
BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF 
Not Supported
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF 
Disabled
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- 
ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, 
EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- 
MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- 
MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ 
MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150 v1] Latency Tolerance Reporting
		Max snoop latency: 0ns
		Max no snoop latency: 0ns
	Kernel driver in use: xhci_hcd
00: 12 19 14 00 06 04 10 00 03 30 03 0c 10 00 00 00
10: 04 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 70 c3 c9 08 00 00 00 00 00 00 00 00 00 00 00
60: 30 20 00 00 00 00 00 00 00 00 00 00 09 18 20 00
70: 05 90 86 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 11 a0 07 80 00 10 00 00 80 10 00 00 00 00 00 00
a0: 10 00 02 00 c0 8f 00 00 00 28 19 00 12 ec 07 00
b0: 00 00 12 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 10 08 00 00 00 00 00 00 00 00 00 00
d0: 02 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 55 00 00 00 01 05 10 20 20 00
f0: 50 07 00 00 00 00 00 80 00 00 00 00 00 00 00 00


>
> If it does have pref, could be of device layer does not pass the pref
> flag properly
> via pci_parse_of_addrs/of_get_property(node, "assigned-addresses".
>
> or the addr0 from "ranges" and "assigned-address" has different definition.
>
> Thanks
>
> Yinghai
>