* [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-03-31 8:56 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-03-31 8:56 UTC (permalink / raw)
To: linux-arm-kernel
After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
the macb1 interface refuses to work properly because it tries
to cling to address 0 which isn't able to communicate in broadcast with
the mac anymore. The micrel phy on the board is actually configured
to show up at address 1.
Adding the phy node and its real address fixes the issue.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org> #3.19
---
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index fec1fca2ad66..6c4bc53cbf4e 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -167,7 +167,13 @@
macb1: ethernet at f802c000 {
phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ ethernet-phy at 1 {
+ reg = <0x1>;
+ };
};
dbgu: serial at ffffee00 {
--
2.1.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-03-31 8:56 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-03-31 8:56 UTC (permalink / raw)
To: linux-arm-kernel, netdev
Cc: linux-kernel, Boris BREZILLON, Alexandre Belloni, Nicolas Ferre,
Johan Hovold, stable
After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
the macb1 interface refuses to work properly because it tries
to cling to address 0 which isn't able to communicate in broadcast with
the mac anymore. The micrel phy on the board is actually configured
to show up at address 1.
Adding the phy node and its real address fixes the issue.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org> #3.19
---
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index fec1fca2ad66..6c4bc53cbf4e 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -167,7 +167,13 @@
macb1: ethernet@f802c000 {
phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ };
};
dbgu: serial@ffffee00 {
--
2.1.3
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
2015-03-31 8:56 ` Nicolas Ferre
(?)
@ 2015-04-03 8:43 ` Nicolas Ferre
-1 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-03 8:43 UTC (permalink / raw)
To: linux-arm-kernel
Le 31/03/2015 10:56, Nicolas Ferre a ?crit :
> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> the macb1 interface refuses to work properly because it tries
> to cling to address 0 which isn't able to communicate in broadcast with
> the mac anymore. The micrel phy on the board is actually configured
> to show up at address 1.
> Adding the phy node and its real address fixes the issue.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Johan Hovold <johan@kernel.org>
> Cc: <stable@vger.kernel.org> #3.19
> ---
Arnd, Olof, Kevin,
It seems late but, is it possible to queue this patch as a 4.0 fixes?
Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
by u-boot previously.
Bye,
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index fec1fca2ad66..6c4bc53cbf4e 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -167,7 +167,13 @@
>
> macb1: ethernet at f802c000 {
> phy-mode = "rmii";
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "okay";
> +
> + ethernet-phy at 1 {
> + reg = <0x1>;
> + };
> };
>
> dbgu: serial at ffffee00 {
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-03 8:43 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-03 8:43 UTC (permalink / raw)
To: linux-arm-kernel, Arnd Bergmann, Olof Johansson, Kevin Hilman,
ARM Maintainers
Cc: netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
Le 31/03/2015 10:56, Nicolas Ferre a écrit :
> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> the macb1 interface refuses to work properly because it tries
> to cling to address 0 which isn't able to communicate in broadcast with
> the mac anymore. The micrel phy on the board is actually configured
> to show up at address 1.
> Adding the phy node and its real address fixes the issue.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Johan Hovold <johan@kernel.org>
> Cc: <stable@vger.kernel.org> #3.19
> ---
Arnd, Olof, Kevin,
It seems late but, is it possible to queue this patch as a 4.0 fixes?
Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
by u-boot previously.
Bye,
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index fec1fca2ad66..6c4bc53cbf4e 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -167,7 +167,13 @@
>
> macb1: ethernet@f802c000 {
> phy-mode = "rmii";
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "okay";
> +
> + ethernet-phy@1 {
> + reg = <0x1>;
> + };
> };
>
> dbgu: serial@ffffee00 {
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-03 8:43 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-03 8:43 UTC (permalink / raw)
To: linux-arm-kernel, Arnd Bergmann, Olof Johansson, Kevin Hilman,
ARM Maintainers
Cc: netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
Le 31/03/2015 10:56, Nicolas Ferre a �crit :
> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> the macb1 interface refuses to work properly because it tries
> to cling to address 0 which isn't able to communicate in broadcast with
> the mac anymore. The micrel phy on the board is actually configured
> to show up at address 1.
> Adding the phy node and its real address fixes the issue.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Johan Hovold <johan@kernel.org>
> Cc: <stable@vger.kernel.org> #3.19
> ---
Arnd, Olof, Kevin,
It seems late but, is it possible to queue this patch as a 4.0 fixes?
Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
by u-boot previously.
Bye,
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index fec1fca2ad66..6c4bc53cbf4e 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -167,7 +167,13 @@
>
> macb1: ethernet@f802c000 {
> phy-mode = "rmii";
> + #address-cells = <1>;
> + #size-cells = <0>;
> status = "okay";
> +
> + ethernet-phy@1 {
> + reg = <0x1>;
> + };
> };
>
> dbgu: serial@ffffee00 {
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
2015-04-03 8:43 ` Nicolas Ferre
(?)
@ 2015-04-03 20:55 ` Olof Johansson
-1 siblings, 0 replies; 15+ messages in thread
From: Olof Johansson @ 2015-04-03 20:55 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> Le 31/03/2015 10:56, Nicolas Ferre a ?crit :
> > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > the macb1 interface refuses to work properly because it tries
> > to cling to address 0 which isn't able to communicate in broadcast with
> > the mac anymore. The micrel phy on the board is actually configured
> > to show up at address 1.
> > Adding the phy node and its real address fixes the issue.
> >
> > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> > Cc: Johan Hovold <johan@kernel.org>
> > Cc: <stable@vger.kernel.org> #3.19
> > ---
>
> Arnd, Olof, Kevin,
>
> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>
> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> by u-boot previously.
Sure, resend it to arm at kernel.org.
-Olof
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-03 20:55 ` Olof Johansson
0 siblings, 0 replies; 15+ messages in thread
From: Olof Johansson @ 2015-04-03 20:55 UTC (permalink / raw)
To: Nicolas Ferre
Cc: linux-arm-kernel, Arnd Bergmann, Kevin Hilman, ARM Maintainers,
netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> Le 31/03/2015 10:56, Nicolas Ferre a écrit :
> > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > the macb1 interface refuses to work properly because it tries
> > to cling to address 0 which isn't able to communicate in broadcast with
> > the mac anymore. The micrel phy on the board is actually configured
> > to show up at address 1.
> > Adding the phy node and its real address fixes the issue.
> >
> > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> > Cc: Johan Hovold <johan@kernel.org>
> > Cc: <stable@vger.kernel.org> #3.19
> > ---
>
> Arnd, Olof, Kevin,
>
> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>
> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> by u-boot previously.
Sure, resend it to arm@kernel.org.
-Olof
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-03 20:55 ` Olof Johansson
0 siblings, 0 replies; 15+ messages in thread
From: Olof Johansson @ 2015-04-03 20:55 UTC (permalink / raw)
To: Nicolas Ferre
Cc: linux-arm-kernel, Arnd Bergmann, Kevin Hilman, ARM Maintainers,
netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> Le 31/03/2015 10:56, Nicolas Ferre a �crit :
> > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > the macb1 interface refuses to work properly because it tries
> > to cling to address 0 which isn't able to communicate in broadcast with
> > the mac anymore. The micrel phy on the board is actually configured
> > to show up at address 1.
> > Adding the phy node and its real address fixes the issue.
> >
> > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> > Cc: Johan Hovold <johan@kernel.org>
> > Cc: <stable@vger.kernel.org> #3.19
> > ---
>
> Arnd, Olof, Kevin,
>
> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>
> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> by u-boot previously.
Sure, resend it to arm@kernel.org.
-Olof
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
2015-04-03 20:55 ` Olof Johansson
(?)
@ 2015-04-03 21:56 ` Olof Johansson
-1 siblings, 0 replies; 15+ messages in thread
From: Olof Johansson @ 2015-04-03 21:56 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> > Le 31/03/2015 10:56, Nicolas Ferre a ?crit :
> > > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > > the macb1 interface refuses to work properly because it tries
> > > to cling to address 0 which isn't able to communicate in broadcast with
> > > the mac anymore. The micrel phy on the board is actually configured
> > > to show up at address 1.
> > > Adding the phy node and its real address fixes the issue.
> > >
> > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> > > Cc: Johan Hovold <johan@kernel.org>
> > > Cc: <stable@vger.kernel.org> #3.19
> > > ---
> >
> > Arnd, Olof, Kevin,
> >
> > It seems late but, is it possible to queue this patch as a 4.0 fixes?
> >
> > Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> > by u-boot previously.
>
> Sure, resend it to arm at kernel.org.
Nevermind, I ended up picking it up from the list. Applied.
-Olof
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-03 21:56 ` Olof Johansson
0 siblings, 0 replies; 15+ messages in thread
From: Olof Johansson @ 2015-04-03 21:56 UTC (permalink / raw)
To: Nicolas Ferre
Cc: linux-arm-kernel, Arnd Bergmann, Kevin Hilman, ARM Maintainers,
netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> > Le 31/03/2015 10:56, Nicolas Ferre a écrit :
> > > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > > the macb1 interface refuses to work properly because it tries
> > > to cling to address 0 which isn't able to communicate in broadcast with
> > > the mac anymore. The micrel phy on the board is actually configured
> > > to show up at address 1.
> > > Adding the phy node and its real address fixes the issue.
> > >
> > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> > > Cc: Johan Hovold <johan@kernel.org>
> > > Cc: <stable@vger.kernel.org> #3.19
> > > ---
> >
> > Arnd, Olof, Kevin,
> >
> > It seems late but, is it possible to queue this patch as a 4.0 fixes?
> >
> > Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> > by u-boot previously.
>
> Sure, resend it to arm@kernel.org.
Nevermind, I ended up picking it up from the list. Applied.
-Olof
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-03 21:56 ` Olof Johansson
0 siblings, 0 replies; 15+ messages in thread
From: Olof Johansson @ 2015-04-03 21:56 UTC (permalink / raw)
To: Nicolas Ferre
Cc: linux-arm-kernel, Arnd Bergmann, Kevin Hilman, ARM Maintainers,
netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> > Le 31/03/2015 10:56, Nicolas Ferre a �crit :
> > > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > > the macb1 interface refuses to work properly because it tries
> > > to cling to address 0 which isn't able to communicate in broadcast with
> > > the mac anymore. The micrel phy on the board is actually configured
> > > to show up at address 1.
> > > Adding the phy node and its real address fixes the issue.
> > >
> > > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> > > Cc: Johan Hovold <johan@kernel.org>
> > > Cc: <stable@vger.kernel.org> #3.19
> > > ---
> >
> > Arnd, Olof, Kevin,
> >
> > It seems late but, is it possible to queue this patch as a 4.0 fixes?
> >
> > Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> > by u-boot previously.
>
> Sure, resend it to arm@kernel.org.
Nevermind, I ended up picking it up from the list. Applied.
-Olof
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
2015-04-03 21:56 ` Olof Johansson
(?)
(?)
@ 2015-04-04 12:45 ` Nicolas Ferre
-1 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-04 12:45 UTC (permalink / raw)
To: linux-arm-kernel
Le 03/04/2015 23:56, Olof Johansson a ?crit :
> On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
>> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
>>> Le 31/03/2015 10:56, Nicolas Ferre a ?crit :
>>>> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
>>>> the macb1 interface refuses to work properly because it tries
>>>> to cling to address 0 which isn't able to communicate in broadcast with
>>>> the mac anymore. The micrel phy on the board is actually configured
>>>> to show up at address 1.
>>>> Adding the phy node and its real address fixes the issue.
>>>>
>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>> Cc: Johan Hovold <johan@kernel.org>
>>>> Cc: <stable@vger.kernel.org> #3.19
>>>> ---
>>>
>>> Arnd, Olof, Kevin,
>>>
>>> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>>>
>>> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
>>> by u-boot previously.
>>
>> Sure, resend it to arm at kernel.org.
>
> Nevermind, I ended up picking it up from the list. Applied.
Cool: thanks Olof!
Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-04 12:45 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-04 12:45 UTC (permalink / raw)
To: Olof Johansson
Cc: linux-arm-kernel, Arnd Bergmann, Kevin Hilman, ARM Maintainers,
netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
Le 03/04/2015 23:56, Olof Johansson a écrit :
> On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
>> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
>>> Le 31/03/2015 10:56, Nicolas Ferre a écrit :
>>>> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
>>>> the macb1 interface refuses to work properly because it tries
>>>> to cling to address 0 which isn't able to communicate in broadcast with
>>>> the mac anymore. The micrel phy on the board is actually configured
>>>> to show up at address 1.
>>>> Adding the phy node and its real address fixes the issue.
>>>>
>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>> Cc: Johan Hovold <johan@kernel.org>
>>>> Cc: <stable@vger.kernel.org> #3.19
>>>> ---
>>>
>>> Arnd, Olof, Kevin,
>>>
>>> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>>>
>>> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
>>> by u-boot previously.
>>
>> Sure, resend it to arm@kernel.org.
>
> Nevermind, I ended up picking it up from the list. Applied.
Cool: thanks Olof!
Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-04 12:45 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-04 12:45 UTC (permalink / raw)
To: Olof Johansson
Cc: Boris BREZILLON, Arnd Bergmann, Kevin Hilman, netdev,
linux-kernel, stable, Johan Hovold, ARM Maintainers,
Alexandre Belloni, linux-arm-kernel
Le 03/04/2015 23:56, Olof Johansson a écrit :
> On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
>> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
>>> Le 31/03/2015 10:56, Nicolas Ferre a écrit :
>>>> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
>>>> the macb1 interface refuses to work properly because it tries
>>>> to cling to address 0 which isn't able to communicate in broadcast with
>>>> the mac anymore. The micrel phy on the board is actually configured
>>>> to show up at address 1.
>>>> Adding the phy node and its real address fixes the issue.
>>>>
>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>> Cc: Johan Hovold <johan@kernel.org>
>>>> Cc: <stable@vger.kernel.org> #3.19
>>>> ---
>>>
>>> Arnd, Olof, Kevin,
>>>
>>> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>>>
>>> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
>>> by u-boot previously.
>>
>> Sure, resend it to arm@kernel.org.
>
> Nevermind, I ended up picking it up from the list. Applied.
Cool: thanks Olof!
Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1
@ 2015-04-04 12:45 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2015-04-04 12:45 UTC (permalink / raw)
To: Olof Johansson
Cc: linux-arm-kernel, Arnd Bergmann, Kevin Hilman, ARM Maintainers,
netdev, linux-kernel, Boris BREZILLON, Alexandre Belloni,
Johan Hovold, stable
Le 03/04/2015 23:56, Olof Johansson a �crit :
> On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
>> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
>>> Le 31/03/2015 10:56, Nicolas Ferre a �crit :
>>>> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
>>>> the macb1 interface refuses to work properly because it tries
>>>> to cling to address 0 which isn't able to communicate in broadcast with
>>>> the mac anymore. The micrel phy on the board is actually configured
>>>> to show up at address 1.
>>>> Adding the phy node and its real address fixes the issue.
>>>>
>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>> Cc: Johan Hovold <johan@kernel.org>
>>>> Cc: <stable@vger.kernel.org> #3.19
>>>> ---
>>>
>>> Arnd, Olof, Kevin,
>>>
>>> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>>>
>>> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
>>> by u-boot previously.
>>
>> Sure, resend it to arm@kernel.org.
>
> Nevermind, I ended up picking it up from the list. Applied.
Cool: thanks Olof!
Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2015-04-04 12:47 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-03-31 8:56 [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1 Nicolas Ferre
2015-03-31 8:56 ` Nicolas Ferre
2015-04-03 8:43 ` Nicolas Ferre
2015-04-03 8:43 ` Nicolas Ferre
2015-04-03 8:43 ` Nicolas Ferre
2015-04-03 20:55 ` Olof Johansson
2015-04-03 20:55 ` Olof Johansson
2015-04-03 20:55 ` Olof Johansson
2015-04-03 21:56 ` Olof Johansson
2015-04-03 21:56 ` Olof Johansson
2015-04-03 21:56 ` Olof Johansson
2015-04-04 12:45 ` Nicolas Ferre
2015-04-04 12:45 ` Nicolas Ferre
2015-04-04 12:45 ` Nicolas Ferre
2015-04-04 12:45 ` Nicolas Ferre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.