* [PATCH v3 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-02-03 11:38 ` Christophe Leroy
0 siblings, 0 replies; 12+ messages in thread
From: Christophe Leroy @ 2015-02-03 11:38 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
scottwood
Cc: linuxppc-dev, linux-kernel
Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
v2: no change
v3: no change
arch/powerpc/kernel/head_8xx.S | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 3d4b8ee..79b8a23 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -532,9 +532,6 @@ DARFixed:/* Return from dcbx instruction bug workaround */
/* define if you don't want to use self modifying code */
#define NO_SELF_MODIFYING_CODE
FixupDAR:/* Entry point for dcbx workaround. */
-#ifdef CONFIG_8xx_CPU6
- mtspr SPRN_DAR, r3
-#endif
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
@@ -551,9 +548,6 @@ FixupDAR:/* Entry point for dcbx workaround. */
/* Extract level 2 index */
rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
lwzx r11, r10, r11 /* Get the pte */
-#ifdef CONFIG_8xx_CPU6
- mfspr r3, SPRN_DAR
-#endif
/* concat physical page address(r11) and page offset(r10) */
mfspr r10, SPRN_SRR0
rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v3 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-02-03 11:38 ` Christophe Leroy
0 siblings, 0 replies; 12+ messages in thread
From: Christophe Leroy @ 2015-02-03 11:38 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
scottwood
Cc: linux-kernel, linuxppc-dev, Joakim Tjernlund
Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
v2: no change
v3: no change
arch/powerpc/kernel/head_8xx.S | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 3d4b8ee..79b8a23 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -532,9 +532,6 @@ DARFixed:/* Return from dcbx instruction bug workaround */
/* define if you don't want to use self modifying code */
#define NO_SELF_MODIFYING_CODE
FixupDAR:/* Entry point for dcbx workaround. */
-#ifdef CONFIG_8xx_CPU6
- mtspr SPRN_DAR, r3
-#endif
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
@@ -551,9 +548,6 @@ FixupDAR:/* Entry point for dcbx workaround. */
/* Extract level 2 index */
rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
lwzx r11, r10, r11 /* Get the pte */
-#ifdef CONFIG_8xx_CPU6
- mfspr r3, SPRN_DAR
-#endif
/* concat physical page address(r11) and page offset(r10) */
mfspr r10, SPRN_SRR0
rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
2015-02-03 11:38 ` Christophe Leroy
@ 2015-03-26 21:32 ` Scott Wood
-1 siblings, 0 replies; 12+ messages in thread
From: Scott Wood @ 2015-03-26 21:32 UTC (permalink / raw)
To: LEROY Christophe; +Cc: Paul Mackerras, linuxppc-dev, linux-kernel
On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> ---
> v2: no change
> v3: no change
This doesn't apply cleanly.
> arch/powerpc/kernel/head_8xx.S | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index 3d4b8ee..79b8a23 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -532,9 +532,6 @@ DARFixed:/* Return from dcbx instruction bug workaround */
> /* define if you don't want to use self modifying code */
> #define NO_SELF_MODIFYING_CODE
> FixupDAR:/* Entry point for dcbx workaround. */
> -#ifdef CONFIG_8xx_CPU6
> - mtspr SPRN_DAR, r3
> -#endif
> mtspr SPRN_SPRG_SCRATCH2, r10
> /* fetch instruction from memory. */
> mfspr r10, SPRN_SRR0
This hunk looks OK but should start at line 500.
> @@ -551,9 +548,6 @@ FixupDAR:/* Entry point for dcbx workaround. */
> /* Extract level 2 index */
> rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
> lwzx r11, r10, r11 /* Get the pte */
> -#ifdef CONFIG_8xx_CPU6
> - mfspr r3, SPRN_DAR
> -#endif
> /* concat physical page address(r11) and page offset(r10) */
> mfspr r10, SPRN_SRR0
> rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31
There is no ifdef CONFIG_8xx_CPU6 after any of the the "Get the pte"
lines, and none of them are "lwzx r11, r10, r11".
What tree is this patchset against?
-Scott
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-03-26 21:32 ` Scott Wood
0 siblings, 0 replies; 12+ messages in thread
From: Scott Wood @ 2015-03-26 21:32 UTC (permalink / raw)
To: LEROY Christophe
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> ---
> v2: no change
> v3: no change
This doesn't apply cleanly.
> arch/powerpc/kernel/head_8xx.S | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index 3d4b8ee..79b8a23 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -532,9 +532,6 @@ DARFixed:/* Return from dcbx instruction bug workaround */
> /* define if you don't want to use self modifying code */
> #define NO_SELF_MODIFYING_CODE
> FixupDAR:/* Entry point for dcbx workaround. */
> -#ifdef CONFIG_8xx_CPU6
> - mtspr SPRN_DAR, r3
> -#endif
> mtspr SPRN_SPRG_SCRATCH2, r10
> /* fetch instruction from memory. */
> mfspr r10, SPRN_SRR0
This hunk looks OK but should start at line 500.
> @@ -551,9 +548,6 @@ FixupDAR:/* Entry point for dcbx workaround. */
> /* Extract level 2 index */
> rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
> lwzx r11, r10, r11 /* Get the pte */
> -#ifdef CONFIG_8xx_CPU6
> - mfspr r3, SPRN_DAR
> -#endif
> /* concat physical page address(r11) and page offset(r10) */
> mfspr r10, SPRN_SRR0
> rlwimi r11, r10, 0, 32 - PAGE_SHIFT, 31
There is no ifdef CONFIG_8xx_CPU6 after any of the the "Get the pte"
lines, and none of them are "lwzx r11, r10, r11".
What tree is this patchset against?
-Scott
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
2015-03-26 21:32 ` Scott Wood
@ 2015-04-12 16:16 ` leroy christophe
-1 siblings, 0 replies; 12+ messages in thread
From: leroy christophe @ 2015-04-12 16:16 UTC (permalink / raw)
To: Scott Wood; +Cc: Paul Mackerras, linuxppc-dev, linux-kernel
Le 26/03/2015 22:32, Scott Wood a écrit :
> On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
>> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
>> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> v2: no change
>> v3: no change
> This doesn't apply cleanly.
>
>
You already applied part of that patchset it in your next tree,
including that one (commit 2374d0a).
You told me to re-submit a patchset with only the remaining ones,
therefore I sent v4 on the 4th of Feb, based on your tree.
Christophe
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-04-12 16:16 ` leroy christophe
0 siblings, 0 replies; 12+ messages in thread
From: leroy christophe @ 2015-04-12 16:16 UTC (permalink / raw)
To: Scott Wood
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
Le 26/03/2015 22:32, Scott Wood a écrit :
> On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
>> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
>> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> v2: no change
>> v3: no change
> This doesn't apply cleanly.
>
>
You already applied part of that patchset it in your next tree,
including that one (commit 2374d0a).
You told me to re-submit a patchset with only the remaining ones,
therefore I sent v4 on the 4th of Feb, based on your tree.
Christophe
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
2015-04-12 16:16 ` leroy christophe
@ 2015-04-13 20:26 ` Scott Wood
-1 siblings, 0 replies; 12+ messages in thread
From: Scott Wood @ 2015-04-13 20:26 UTC (permalink / raw)
To: leroy christophe; +Cc: Paul Mackerras, linuxppc-dev, linux-kernel
On Sun, 2015-04-12 at 18:16 +0200, leroy christophe wrote:
>
> Le 26/03/2015 22:32, Scott Wood a écrit :
> > On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
> >> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
> >> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
> >>
> >> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> >> ---
> >> v2: no change
> >> v3: no change
> > This doesn't apply cleanly.
> >
> >
> You already applied part of that patchset it in your next tree,
> including that one (commit 2374d0a).
> You told me to re-submit a patchset with only the remaining ones,
> therefore I sent v4 on the 4th of Feb, based on your tree.
OK. I applied v2, and didn't remember that when I came across v3 in
patchwork.
-Scott
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-04-13 20:26 ` Scott Wood
0 siblings, 0 replies; 12+ messages in thread
From: Scott Wood @ 2015-04-13 20:26 UTC (permalink / raw)
To: leroy christophe
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
On Sun, 2015-04-12 at 18:16 +0200, leroy christophe wrote:
>
> Le 26/03/2015 22:32, Scott Wood a écrit :
> > On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
> >> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
> >> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
> >>
> >> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> >> ---
> >> v2: no change
> >> v3: no change
> > This doesn't apply cleanly.
> >
> >
> You already applied part of that patchset it in your next tree,
> including that one (commit 2374d0a).
> You told me to re-submit a patchset with only the remaining ones,
> therefore I sent v4 on the 4th of Feb, based on your tree.
OK. I applied v2, and didn't remember that when I came across v3 in
patchwork.
-Scott
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
2015-04-13 20:26 ` Scott Wood
@ 2015-04-13 22:19 ` leroy christophe
-1 siblings, 0 replies; 12+ messages in thread
From: leroy christophe @ 2015-04-13 22:19 UTC (permalink / raw)
To: Scott Wood; +Cc: Paul Mackerras, linuxppc-dev, linux-kernel
Le 13/04/2015 22:26, Scott Wood a écrit :
> On Sun, 2015-04-12 at 18:16 +0200, leroy christophe wrote:
>> Le 26/03/2015 22:32, Scott Wood a écrit :
>>> On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
>>>> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
>>>> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
>>>>
>>>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>>>> ---
>>>> v2: no change
>>>> v3: no change
>>> This doesn't apply cleanly.
>>>
>>>
>> You already applied part of that patchset it in your next tree,
>> including that one (commit 2374d0a).
>> You told me to re-submit a patchset with only the remaining ones,
>> therefore I sent v4 on the 4th of Feb, based on your tree.
> OK. I applied v2, and didn't remember that when I came across v3 in
> patchwork.
>
>
What about v4 (the remaining ones) ? You got comments on the last one of
the set, have you applied the other ones or shall I re-sumbit a full v5 ?
Christophe
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-04-13 22:19 ` leroy christophe
0 siblings, 0 replies; 12+ messages in thread
From: leroy christophe @ 2015-04-13 22:19 UTC (permalink / raw)
To: Scott Wood
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
Le 13/04/2015 22:26, Scott Wood a écrit :
> On Sun, 2015-04-12 at 18:16 +0200, leroy christophe wrote:
>> Le 26/03/2015 22:32, Scott Wood a écrit :
>>> On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
>>>> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
>>>> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
>>>>
>>>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>>>> ---
>>>> v2: no change
>>>> v3: no change
>>> This doesn't apply cleanly.
>>>
>>>
>> You already applied part of that patchset it in your next tree,
>> including that one (commit 2374d0a).
>> You told me to re-submit a patchset with only the remaining ones,
>> therefore I sent v4 on the 4th of Feb, based on your tree.
> OK. I applied v2, and didn't remember that when I came across v3 in
> patchwork.
>
>
What about v4 (the remaining ones) ? You got comments on the last one of
the set, have you applied the other ones or shall I re-sumbit a full v5 ?
Christophe
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
2015-04-13 22:19 ` leroy christophe
@ 2015-04-15 0:51 ` Scott Wood
-1 siblings, 0 replies; 12+ messages in thread
From: Scott Wood @ 2015-04-15 0:51 UTC (permalink / raw)
To: leroy christophe; +Cc: Paul Mackerras, linuxppc-dev, linux-kernel
On Tue, 2015-04-14 at 00:19 +0200, leroy christophe wrote:
>
> Le 13/04/2015 22:26, Scott Wood a écrit :
> > On Sun, 2015-04-12 at 18:16 +0200, leroy christophe wrote:
> >> Le 26/03/2015 22:32, Scott Wood a écrit :
> >>> On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
> >>>> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
> >>>> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
> >>>>
> >>>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> >>>> ---
> >>>> v2: no change
> >>>> v3: no change
> >>> This doesn't apply cleanly.
> >>>
> >>>
> >> You already applied part of that patchset it in your next tree,
> >> including that one (commit 2374d0a).
> >> You told me to re-submit a patchset with only the remaining ones,
> >> therefore I sent v4 on the 4th of Feb, based on your tree.
> > OK. I applied v2, and didn't remember that when I came across v3 in
> > patchwork.
> >
> >
> What about v4 (the remaining ones) ? You got comments on the last one of
> the set, have you applied the other ones or shall I re-sumbit a full v5 ?
I haven't applied them yet.
-Scott
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [v3, 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR
@ 2015-04-15 0:51 ` Scott Wood
0 siblings, 0 replies; 12+ messages in thread
From: Scott Wood @ 2015-04-15 0:51 UTC (permalink / raw)
To: leroy christophe
Cc: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
linuxppc-dev, linux-kernel
On Tue, 2015-04-14 at 00:19 +0200, leroy christophe wrote:
>
> Le 13/04/2015 22:26, Scott Wood a écrit :
> > On Sun, 2015-04-12 at 18:16 +0200, leroy christophe wrote:
> >> Le 26/03/2015 22:32, Scott Wood a écrit :
> >>> On Tue, Feb 03, 2015 at 12:38:16PM +0100, LEROY Christophe wrote:
> >>>> Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and
> >>>> MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless.
> >>>>
> >>>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> >>>> ---
> >>>> v2: no change
> >>>> v3: no change
> >>> This doesn't apply cleanly.
> >>>
> >>>
> >> You already applied part of that patchset it in your next tree,
> >> including that one (commit 2374d0a).
> >> You told me to re-submit a patchset with only the remaining ones,
> >> therefore I sent v4 on the 4th of Feb, based on your tree.
> > OK. I applied v2, and didn't remember that when I came across v3 in
> > patchwork.
> >
> >
> What about v4 (the remaining ones) ? You got comments on the last one of
> the set, have you applied the other ones or shall I re-sumbit a full v5 ?
I haven't applied them yet.
-Scott
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-04-15 0:51 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-03 11:38 [PATCH v3 01/11] powerpc/8xx: remove remaining unnecessary code in FixupDAR Christophe Leroy
2015-02-03 11:38 ` Christophe Leroy
2015-03-26 21:32 ` [v3, " Scott Wood
2015-03-26 21:32 ` Scott Wood
2015-04-12 16:16 ` leroy christophe
2015-04-12 16:16 ` leroy christophe
2015-04-13 20:26 ` Scott Wood
2015-04-13 20:26 ` Scott Wood
2015-04-13 22:19 ` leroy christophe
2015-04-13 22:19 ` leroy christophe
2015-04-15 0:51 ` Scott Wood
2015-04-15 0:51 ` Scott Wood
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.