All of lore.kernel.org
 help / color / mirror / Atom feed
From: akuster808 <akuster808@gmail.com>
To: "Aníbal Limón" <anibal.limon@linux.intel.com>,
	"yocto@yoctoproject.org" <yocto@yoctoproject.org>,
	"OpenEmbedded Devel List"
	<openembedded-devel@lists.openembedded.org>
Subject: Re: [yocto] meta-qemu-bsps
Date: Sun, 19 Apr 2015 15:29:36 -0700	[thread overview]
Message-ID: <55342C50.5080906@gmail.com> (raw)
In-Reply-To: <55317CC1.4060809@linux.intel.com>



On 04/17/2015 02:36 PM, Aníbal Limón wrote:
> Hi Armin,
>
> I tested the ppc64 with poky master and looks great only a couple of issues,

thanks for trying this.

>
> When is compiling the kernel show this warning related to the config,

ok
>
>      WARNING: [kernel config]: specified values did not make it into the
> kernel's final
>
>      Value requested for CONFIG_FB_DDC not in final ".config"
>      Requested value: "CONFIG_FB_DDC=y"
>      Actual value set: "# CONFIG_FB_DDC is not set"
>
>      Value requested for CONFIG_MMU_NOTIFIER not in final ".config"
>      Requested value: "CONFIG_MMU_NOTIFIER=y"
>      Actual value set: ""
>
> When built core-image-minimal and then tries to load qemu with nographic
> it didn't work the graphic mode works ok.

I will have to look into that.

regards,
Armin
>
> QEMU Starting
>   Build Date = Apr 30 2013 14:04:00
>   FW Version = git-8cfdfc43f4c4c8c8
>   Press "s" to enter Open Firmware.
>
> Populating /vdevice methods
> Populating /vdevice/vty@71000000
> Populating /vdevice/nvram@71000001
>
> NVRAM: size=65536, fetch=200E, store=200F
> Populating /vdevice/v-scsi@71000002
> VSCSI: Initializing
> VSCSI: Looking for devices
>    8000000000000000 DISK     : "QEMU     QEMU HARDDISK    1.6."
>    8200000000000000 CD-ROM   : "QEMU     QEMU CD-ROM      1.6."
> Populating /pci@800000020000000
>   Adapters on 0800000020000000
>                       00 0000 (D) : 8086 100e    network [ ethernet ]
>                       00 0800 (D) : 1234 1111    qemu vga
>                       00 1000 (D) : 106b 003f    serial bus [ usb-ohci ]
> No NVRAM common partition, re-initializing...
> Installing QEMU fb
>   Scan USB...
>    USB Keyboard
>    USB Mouse
>    USB Mouse
> No console specified using screen & keyboard
> Detected RAM kernel at 400000 (f5f180 bytes)
>    Welcome to Open Firmware
>
>    Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
>    This program and the accompanying materials are made available
>    under the terms of the BSD License available at
> http://www.opensource.org/licenses/bsd-license.php
>
> Booting from memory...
> Linux ppc64
> #1 SMP PREEMPT F
>
> Cheers,
>      alimon
>
> On 17/04/15 15:45, akuster808 wrote:
>> Hello all,
>>
>> I just put together a layer to warehouse miscellaneous qemu machine
>> support. ppc64 is the there now, working on more. Contributions are
>> welcome.
>>
>> https://github.com/akuster/meta-qemu-bsps
>>
>> enjoy,
>>
>> Armin
>


WARNING: multiple messages have this Message-ID (diff)
From: akuster808 <akuster808@gmail.com>
To: "Aníbal Limón" <anibal.limon@linux.intel.com>,
	"yocto@yoctoproject.org" <yocto@yoctoproject.org>,
	"OpenEmbedded Devel List"
	<openembedded-devel@lists.openembedded.org>
Subject: Re: meta-qemu-bsps
Date: Sun, 19 Apr 2015 15:29:36 -0700	[thread overview]
Message-ID: <55342C50.5080906@gmail.com> (raw)
In-Reply-To: <55317CC1.4060809@linux.intel.com>



On 04/17/2015 02:36 PM, Aníbal Limón wrote:
> Hi Armin,
>
> I tested the ppc64 with poky master and looks great only a couple of issues,

thanks for trying this.

>
> When is compiling the kernel show this warning related to the config,

ok
>
>      WARNING: [kernel config]: specified values did not make it into the
> kernel's final
>
>      Value requested for CONFIG_FB_DDC not in final ".config"
>      Requested value: "CONFIG_FB_DDC=y"
>      Actual value set: "# CONFIG_FB_DDC is not set"
>
>      Value requested for CONFIG_MMU_NOTIFIER not in final ".config"
>      Requested value: "CONFIG_MMU_NOTIFIER=y"
>      Actual value set: ""
>
> When built core-image-minimal and then tries to load qemu with nographic
> it didn't work the graphic mode works ok.

I will have to look into that.

regards,
Armin
>
> QEMU Starting
>   Build Date = Apr 30 2013 14:04:00
>   FW Version = git-8cfdfc43f4c4c8c8
>   Press "s" to enter Open Firmware.
>
> Populating /vdevice methods
> Populating /vdevice/vty@71000000
> Populating /vdevice/nvram@71000001
>
> NVRAM: size=65536, fetch=200E, store=200F
> Populating /vdevice/v-scsi@71000002
> VSCSI: Initializing
> VSCSI: Looking for devices
>    8000000000000000 DISK     : "QEMU     QEMU HARDDISK    1.6."
>    8200000000000000 CD-ROM   : "QEMU     QEMU CD-ROM      1.6."
> Populating /pci@800000020000000
>   Adapters on 0800000020000000
>                       00 0000 (D) : 8086 100e    network [ ethernet ]
>                       00 0800 (D) : 1234 1111    qemu vga
>                       00 1000 (D) : 106b 003f    serial bus [ usb-ohci ]
> No NVRAM common partition, re-initializing...
> Installing QEMU fb
>   Scan USB...
>    USB Keyboard
>    USB Mouse
>    USB Mouse
> No console specified using screen & keyboard
> Detected RAM kernel at 400000 (f5f180 bytes)
>    Welcome to Open Firmware
>
>    Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
>    This program and the accompanying materials are made available
>    under the terms of the BSD License available at
> http://www.opensource.org/licenses/bsd-license.php
>
> Booting from memory...
> Linux ppc64
> #1 SMP PREEMPT F
>
> Cheers,
>      alimon
>
> On 17/04/15 15:45, akuster808 wrote:
>> Hello all,
>>
>> I just put together a layer to warehouse miscellaneous qemu machine
>> support. ppc64 is the there now, working on more. Contributions are
>> welcome.
>>
>> https://github.com/akuster/meta-qemu-bsps
>>
>> enjoy,
>>
>> Armin
>


  reply	other threads:[~2015-04-19 22:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-17 20:45 meta-qemu-bsps akuster808
2015-04-17 21:36 ` meta-qemu-bsps Aníbal Limón
2015-04-19 22:29   ` akuster808 [this message]
2015-04-19 22:29     ` meta-qemu-bsps akuster808

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55342C50.5080906@gmail.com \
    --to=akuster808@gmail.com \
    --cc=anibal.limon@linux.intel.com \
    --cc=openembedded-devel@lists.openembedded.org \
    --cc=yocto@yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.