* [PATCH v2 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device
[not found] <90c05bda434a068796547a599e8ea5e3ad3acb21.1430301575.git.johnny.kim@atmel.com>
@ 2015-04-29 12:50 ` Johnny Kim
2015-05-04 9:14 ` Nicolas Ferre
2015-05-04 9:13 ` [PATCH v2 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver Nicolas Ferre
1 sibling, 1 reply; 3+ messages in thread
From: Johnny Kim @ 2015-04-29 12:50 UTC (permalink / raw)
To: gregkh, linux-wireless
Cc: chris.park, rachel.kim, tony.cho, Nicolas.FERRE, Johnny Kim
Add myself as maintainer for atmel wilc1000
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
---
Changes in v2:
- fix the permissions
- fix the folder tree
---
MAINTAINERS | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b8263c..2ddf38c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9473,6 +9473,16 @@ M: Forest Bond <forest@alittletooquiet.net>
S: Odd Fixes
F: drivers/staging/vt665?/
+STAGING - WILC1000 WIFI DRIVER
+M: Johnny Kim <johnny.kim@atmel.com>
+M: Rachel Kim <rachel.kim@atmel.com>
+M: Dean Lee <dean.lee@atmel.com>
+M: Chris Park <chris.park@atmel.com>
+L: devel@driverdev.osuosl.org
+L: linux-wireless@vger.kernel.org
+S: Supported
+F: drivers/staging/wilc1000/
+
STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER
M: Arnaud Patard <arnaud.patard@rtp-net.org>
S: Odd Fixes
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver
[not found] <90c05bda434a068796547a599e8ea5e3ad3acb21.1430301575.git.johnny.kim@atmel.com>
2015-04-29 12:50 ` [PATCH v2 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device Johnny Kim
@ 2015-05-04 9:13 ` Nicolas Ferre
1 sibling, 0 replies; 3+ messages in thread
From: Nicolas Ferre @ 2015-05-04 9:13 UTC (permalink / raw)
To: Johnny Kim, gregkh, linux-wireless; +Cc: chris.park, rachel.kim, tony.cho
Le 29/04/2015 14:50, Johnny Kim a écrit :
> This driver is for the wilc1000 which is a single chip IEEE 802.11
> b/g/n device.
> The driver works together with cfg80211, which is the kernel side of
> configuration management for wireless devices because the wilc1000
> chipset is fullmac where the MLME is managed in hardware.
>
> The driver worked from kernel version 2.6.38 and being now ported
> to several others since then.
> A TODO file is included as well in this commit.
>
> Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
> Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
> Signed-off-by: Dean Lee <dean.lee@atmel.com>
> Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> Changes in v2:
> - fix the permissions
> - fix the folder tree
Nitpicking: This ^^^ should go there vvv, just after the "---".
> ---
> drivers/staging/Kconfig | 2 +
> drivers/staging/Makefile | 1 +
> drivers/staging/wilc1000/Kconfig | 55 +
> drivers/staging/wilc1000/Makefile | 41 +
> drivers/staging/wilc1000/TODO | 8 +
> drivers/staging/wilc1000/coreconfigsimulator.h | 20 +
> drivers/staging/wilc1000/coreconfigurator.c | 2201 ++++++
> drivers/staging/wilc1000/coreconfigurator.h | 498 ++
> drivers/staging/wilc1000/fifo_buffer.c | 142 +
> drivers/staging/wilc1000/fifo_buffer.h | 23 +
> drivers/staging/wilc1000/host_interface.c | 8074 +++++++++++++++++++++
> drivers/staging/wilc1000/host_interface.h | 1344 ++++
> drivers/staging/wilc1000/itypes.h | 60 +
> drivers/staging/wilc1000/linux_mon.c | 643 ++
> drivers/staging/wilc1000/linux_wlan.c | 2953 ++++++++
> drivers/staging/wilc1000/linux_wlan_common.h | 170 +
> drivers/staging/wilc1000/linux_wlan_sdio.c | 249 +
> drivers/staging/wilc1000/linux_wlan_sdio.h | 14 +
> drivers/staging/wilc1000/linux_wlan_spi.c | 510 ++
> drivers/staging/wilc1000/linux_wlan_spi.h | 14 +
> drivers/staging/wilc1000/wilc_debugfs.c | 185 +
> drivers/staging/wilc1000/wilc_errorsupport.h | 84 +
> drivers/staging/wilc1000/wilc_event.h | 123 +
> drivers/staging/wilc1000/wilc_exported_buf.c | 76 +
> drivers/staging/wilc1000/wilc_log.h | 47 +
> drivers/staging/wilc1000/wilc_memory.c | 63 +
> drivers/staging/wilc1000/wilc_memory.h | 330 +
> drivers/staging/wilc1000/wilc_msgqueue.c | 211 +
> drivers/staging/wilc1000/wilc_msgqueue.h | 133 +
> drivers/staging/wilc1000/wilc_osconfig.h | 55 +
> drivers/staging/wilc1000/wilc_oswrapper.h | 133 +
> drivers/staging/wilc1000/wilc_platform.h | 181 +
> drivers/staging/wilc1000/wilc_sdio.c | 1298 ++++
> drivers/staging/wilc1000/wilc_semaphore.c | 70 +
> drivers/staging/wilc1000/wilc_semaphore.h | 115 +
> drivers/staging/wilc1000/wilc_sleep.c | 36 +
> drivers/staging/wilc1000/wilc_sleep.h | 45 +
> drivers/staging/wilc1000/wilc_spi.c | 1475 ++++
> drivers/staging/wilc1000/wilc_strutils.c | 431 ++
> drivers/staging/wilc1000/wilc_strutils.h | 412 ++
> drivers/staging/wilc1000/wilc_thread.c | 35 +
> drivers/staging/wilc1000/wilc_thread.h | 153 +
> drivers/staging/wilc1000/wilc_time.c | 163 +
> drivers/staging/wilc1000/wilc_time.h | 205 +
> drivers/staging/wilc1000/wilc_timer.c | 51 +
> drivers/staging/wilc1000/wilc_timer.h | 153 +
> drivers/staging/wilc1000/wilc_type.h | 34 +
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4592 ++++++++++++
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.h | 134 +
> drivers/staging/wilc1000/wilc_wfi_netdevice.c | 960 +++
> drivers/staging/wilc1000/wilc_wfi_netdevice.h | 277 +
> drivers/staging/wilc1000/wilc_wlan.c | 2434 +++++++
> drivers/staging/wilc1000/wilc_wlan.h | 321 +
> drivers/staging/wilc1000/wilc_wlan_cfg.c | 643 ++
> drivers/staging/wilc1000/wilc_wlan_cfg.h | 33 +
> drivers/staging/wilc1000/wilc_wlan_if.h | 991 +++
> 56 files changed, 33704 insertions(+)
> create mode 100644 drivers/staging/wilc1000/Kconfig
> create mode 100644 drivers/staging/wilc1000/Makefile
> create mode 100644 drivers/staging/wilc1000/TODO
> create mode 100644 drivers/staging/wilc1000/coreconfigsimulator.h
> create mode 100644 drivers/staging/wilc1000/coreconfigurator.c
> create mode 100644 drivers/staging/wilc1000/coreconfigurator.h
> create mode 100644 drivers/staging/wilc1000/fifo_buffer.c
> create mode 100644 drivers/staging/wilc1000/fifo_buffer.h
> create mode 100644 drivers/staging/wilc1000/host_interface.c
> create mode 100644 drivers/staging/wilc1000/host_interface.h
> create mode 100644 drivers/staging/wilc1000/itypes.h
> create mode 100644 drivers/staging/wilc1000/linux_mon.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan_common.h
> create mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.h
> create mode 100644 drivers/staging/wilc1000/linux_wlan_spi.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan_spi.h
> create mode 100644 drivers/staging/wilc1000/wilc_debugfs.c
> create mode 100644 drivers/staging/wilc1000/wilc_errorsupport.h
> create mode 100644 drivers/staging/wilc1000/wilc_event.h
> create mode 100644 drivers/staging/wilc1000/wilc_exported_buf.c
> create mode 100644 drivers/staging/wilc1000/wilc_log.h
> create mode 100644 drivers/staging/wilc1000/wilc_memory.c
> create mode 100644 drivers/staging/wilc1000/wilc_memory.h
> create mode 100644 drivers/staging/wilc1000/wilc_msgqueue.c
> create mode 100644 drivers/staging/wilc1000/wilc_msgqueue.h
> create mode 100644 drivers/staging/wilc1000/wilc_osconfig.h
> create mode 100644 drivers/staging/wilc1000/wilc_oswrapper.h
> create mode 100644 drivers/staging/wilc1000/wilc_platform.h
> create mode 100644 drivers/staging/wilc1000/wilc_sdio.c
> create mode 100644 drivers/staging/wilc1000/wilc_semaphore.c
> create mode 100644 drivers/staging/wilc1000/wilc_semaphore.h
> create mode 100644 drivers/staging/wilc1000/wilc_sleep.c
> create mode 100644 drivers/staging/wilc1000/wilc_sleep.h
> create mode 100644 drivers/staging/wilc1000/wilc_spi.c
> create mode 100644 drivers/staging/wilc1000/wilc_strutils.c
> create mode 100644 drivers/staging/wilc1000/wilc_strutils.h
> create mode 100644 drivers/staging/wilc1000/wilc_thread.c
> create mode 100644 drivers/staging/wilc1000/wilc_thread.h
> create mode 100644 drivers/staging/wilc1000/wilc_time.c
> create mode 100644 drivers/staging/wilc1000/wilc_time.h
> create mode 100644 drivers/staging/wilc1000/wilc_timer.c
> create mode 100644 drivers/staging/wilc1000/wilc_timer.h
> create mode 100644 drivers/staging/wilc1000/wilc_type.h
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_cfgoperations.h
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_netdevice.c
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_netdevice.h
> create mode 100644 drivers/staging/wilc1000/wilc_wlan.c
> create mode 100644 drivers/staging/wilc1000/wilc_wlan.h
> create mode 100644 drivers/staging/wilc1000/wilc_wlan_cfg.c
> create mode 100644 drivers/staging/wilc1000/wilc_wlan_cfg.h
> create mode 100644 drivers/staging/wilc1000/wilc_wlan_if.h
>
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index bfacf69..da35af6 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -112,4 +112,6 @@ source "drivers/staging/i2o/Kconfig"
>
> source "drivers/staging/fsl-mc/Kconfig"
>
> +source "drivers/staging/wilc1000/Kconfig"
> +
> endif # STAGING
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index 2bbd1bf..edbe5ff 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -48,3 +48,4 @@ obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/
> obj-$(CONFIG_FB_TFT) += fbtft/
> obj-$(CONFIG_I2O) += i2o/
> obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
> +obj-$(CONFIG_WILC1000) += wilc1000/
> diff --git a/drivers/staging/wilc1000/Kconfig b/drivers/staging/wilc1000/Kconfig
> new file mode 100644
> index 0000000..101f908
> --- /dev/null
> +++ b/drivers/staging/wilc1000/Kconfig
> @@ -0,0 +1,55 @@
> +config WILC1000
> + tristate "WILC1000 support (WiFi only)"
> + ---help---
> + This module only support IEEE 802.11n WiFi.
> +
> +choice
> + prompt "Memory Allocation"
> + depends on WILC1000
> + default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
> +
> + config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
> + bool "Preallocate memory at loading driver"
> + ---help---
> + This choice supports static allocation of the memory
> + for the receive buffer. The driver will allocate the RX buffer
> + during initial time. The driver will also free the buffer
> + by calling network device stop.
> +
> + config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY
> + bool "Dynamically allocate memory in real time"
> + ---help---
> + This choice supports dynamic allocation of the memory
> + for the receive buffer. The driver will allocate the RX buffer
> + when it is required.
> +endchoice
> +
> +
> +choice
> + prompt "Bus Type"
> + depends on WILC1000
> + default WILC1000_SDIO
> +
> + config WILC1000_SDIO
> + bool "SDIO support"
> + depends on MMC
> + ---help---
> + This module adds support for the SDIO interface of adapters using
> + WILC chipset. Select this if your platform is using the SDIO bus.
> +
> + config WILC1000_SPI
> + bool "SPI support"
> + ---help---
> + This module adds support for the SPI interface of adapters using
> + WILC chipset. Select this if your platform is using the SPI bus.
> +endchoice
> +
> +
> +config WILC1000_HW_OOB_INTR
> + bool "Use out of band interrupt"
> + depends on WILC1000 && WILC1000_SDIO
> + default n
> + ---help---
> + If your platform don't recognize SDIO IRQ, connect chipset external IRQ pin
> + and check this option. Or, Use this to get all interrupts including SDIO interrupts.
> +
> diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile
> new file mode 100644
> index 0000000..84bd975
> --- /dev/null
> +++ b/drivers/staging/wilc1000/Makefile
> @@ -0,0 +1,41 @@
> +obj-$(CONFIG_WILC1000) += wilc1000.o
> +obj-$(CONFIG_WILC1000_PREALLOCATE_DURING_SYSTEM_BOOT) += wilc_exported_buf.o
> +
> +
> +ccflags-$(CONFIG_WILC1000_SDIO) += -DWILC_SDIO -DCOMPLEMENT_BOOT
> +ccflags-$(CONFIG_WILC1000_HW_OOB_INTR) += -DWILC_SDIO_IRQ_GPIO
> +ccflags-$(CONFIG_WILC1000_SPI) += -DWILC_SPI
> +
> +ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \
> + -DAP_FIRMWARE=\"atmel/wilc1000_ap_fw.bin\" \
> + -DP2P_CONCURRENCY_FIRMWARE=\"atmel/wilc1000_p2p_fw.bin\"
> +
> +ccflags-y += -I$(src)/ -DEXPORT_SYMTAB -D__CHECK_ENDIAN__ -DWILC_ASIC_A0 \
> + -DPLL_WORKAROUND -DCONNECT_DIRECT -DAGING_ALG \
> + -DWILC_PARSE_SCAN_IN_HOST -DDISABLE_PWRSAVE_AND_SCAN_DURING_IP \
> + -DWILC_PLATFORM=WILC_LINUXKERNEL -Wno-unused-function -DUSE_WIRELESS \
> + -DWILC_DEBUGFS
> +#ccflags-y += -DTCP_ACK_FILTER
> +
> +ccflags-$(CONFIG_WILC1000_PREALLOCATE_DURING_SYSTEM_BOOT) += -DMEMORY_STATIC \
> + -DWILC_PREALLOC_AT_BOOT
> +
> +ccflags-$(CONFIG_WILC1000_PREALLOCATE_AT_LOADING_DRIVER) += -DMEMORY_STATIC \
> + -DWILC_PREALLOC_AT_INSMOD
> +
> +ccflags-$(CONFIG_WILC1000_DYNAMICALLY_ALLOCATE_MEMROY) += -DWILC_NORMAL_ALLOC
> +
> +
> +wilc1000-objs := wilc_wfi_netdevice.o wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \
> + wilc_memory.o wilc_msgqueue.o wilc_semaphore.o wilc_sleep.o wilc_strutils.o \
> + wilc_thread.o wilc_time.o wilc_timer.o coreconfigurator.o host_interface.o \
> + fifo_buffer.o wilc_sdio.o wilc_spi.o wilc_wlan_cfg.o wilc_debugfs.o
> +
> +wilc1000-$(CONFIG_WILC1000_SDIO) += linux_wlan_sdio.o
> +wilc1000-$(CONFIG_WILC1000_SPI) += linux_wlan_spi.o
> +
> +WILC1000_SRC_VERSION = 10.0
> +PATCHLEVEL = 2
> +WILC1000_FW_VERSION = 0
> +
> +ccflags-y += -D__DRIVER_VERSION__=\"$(WILC1000_SRC_VERSION).$(PATCHLEVEL)\"
> diff --git a/drivers/staging/wilc1000/TODO b/drivers/staging/wilc1000/TODO
> new file mode 100644
> index 0000000..4dc807b
> --- /dev/null
> +++ b/drivers/staging/wilc1000/TODO
> @@ -0,0 +1,8 @@
> +TODO:
> +- remove the dependencies of kernel versions
> +- remove OS wrapper functions
> +- remove custom debug and tracing functions
> +- rework comments and function headers(also coding style)
> +- remove build warnings
> +- support soft-ap and p2p mode
> +- support resume/suspend function
> diff --git a/drivers/staging/wilc1000/coreconfigsimulator.h b/drivers/staging/wilc1000/coreconfigsimulator.h
> new file mode 100644
> index 0000000..6c3f431
> --- /dev/null
> +++ b/drivers/staging/wilc1000/coreconfigsimulator.h
[..]
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device
2015-04-29 12:50 ` [PATCH v2 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device Johnny Kim
@ 2015-05-04 9:14 ` Nicolas Ferre
0 siblings, 0 replies; 3+ messages in thread
From: Nicolas Ferre @ 2015-05-04 9:14 UTC (permalink / raw)
To: Johnny Kim, gregkh, linux-wireless; +Cc: chris.park, rachel.kim, tony.cho
Le 29/04/2015 14:50, Johnny Kim a écrit :
> Add myself as maintainer for atmel wilc1000
>
> Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
> Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
> Signed-off-by: Dean Lee <dean.lee@atmel.com>
> Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Thanks!
> ---
> Changes in v2:
> - fix the permissions
> - fix the folder tree
> ---
> MAINTAINERS | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1b8263c..2ddf38c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9473,6 +9473,16 @@ M: Forest Bond <forest@alittletooquiet.net>
> S: Odd Fixes
> F: drivers/staging/vt665?/
>
> +STAGING - WILC1000 WIFI DRIVER
> +M: Johnny Kim <johnny.kim@atmel.com>
> +M: Rachel Kim <rachel.kim@atmel.com>
> +M: Dean Lee <dean.lee@atmel.com>
> +M: Chris Park <chris.park@atmel.com>
> +L: devel@driverdev.osuosl.org
> +L: linux-wireless@vger.kernel.org
> +S: Supported
> +F: drivers/staging/wilc1000/
> +
> STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER
> M: Arnaud Patard <arnaud.patard@rtp-net.org>
> S: Odd Fixes
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-05-04 9:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <90c05bda434a068796547a599e8ea5e3ad3acb21.1430301575.git.johnny.kim@atmel.com>
2015-04-29 12:50 ` [PATCH v2 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device Johnny Kim
2015-05-04 9:14 ` Nicolas Ferre
2015-05-04 9:13 ` [PATCH v2 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver Nicolas Ferre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.