* Confusing error
@ 2015-05-05 14:44 Gary Thomas
2015-05-05 15:21 ` Paul Eggleton
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2015-05-05 14:44 UTC (permalink / raw)
To: Yocto Project
I'm getting a very confusing error from bitbake. I'm using a snapshot
from Poky/Yocto (equivalent to 1.8 release) with my own $DISTRO
$ bitbake nand-installer-image
NOTE: Started PRServer with DBfile: /home/gary/tmp/p0381_2015-05-05/p0381_build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 41585, PID: 460
Loading cache: 100% |###################################################################################| ETA: 00:00:00
Loaded 1708 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing RPROVIDES 'virtual/bootloader' (but /home/gary/tmp/p0381_2015-05-05/opt/amltd/poky/meta-amltd/packages/packagegroups /packagegroup-amltd.bb RDEPENDS on or
otherwise requires it)
NOTE: Runtime target 'virtual/bootloader' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['virtual/bootloader']
NOTE: Runtime target 'packagegroup-amltd-boot' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['packagegroup-amltd-boot', 'virtual/bootloader']
ERROR: Required build target 'nand-installer-image' has no buildable providers.
Missing or unbuildable dependency chain was: ['nand-installer-image', 'packagegroup-amltd-boot', 'virtual/bootloader']
But, there is such a provider and I can build it (from the same build tree):
$ bitbake virtual/bootloader
NOTE: Started PRServer with DBfile: /home/gary/tmp/p0381_2015-05-05/p0381_build/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 43428, PID: 515
Loading cache: 100% |###################################################################################| ETA: 00:00:00
Loaded 1708 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.27.0"
BUILD_SYS = "i686-linux"
NATIVELSBSTRING = "Fedora-17"
TARGET_SYS = "arm-amltd-linux-gnueabi"
MACHINE = "teton-p0381"
DISTRO = "amltd"
DISTRO_VERSION = "1.8+snapshot-2015-05-05"
TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa7"
TARGET_FPU = "vfp-neon"
meta
meta-oe
meta-amltd
meta-teton-ls1-p0381
meta-fsl-arm
meta-fsl-arm-extra
meta-browser = "<unknown>:<unknown>"
NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
...
After much research, I found that this is happening because I have
MACHINE_EXTRA_RRECOMMENDS="virtual/bootloader linux-firmware-iwlwifi-5xxx"
If I remove the 'virtual/bootloader' from MACHINE_EXTRA_RRECOMMENDS,
the confusion (and error) go away. Any ideas what's happening and why
I might be getting this confusing error?
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Confusing error
2015-05-05 14:44 Confusing error Gary Thomas
@ 2015-05-05 15:21 ` Paul Eggleton
2015-05-05 15:58 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: Paul Eggleton @ 2015-05-05 15:21 UTC (permalink / raw)
To: Gary Thomas; +Cc: yocto
Hi Gary,
On Tuesday 05 May 2015 08:44:47 Gary Thomas wrote:
> I'm getting a very confusing error from bitbake. I'm using a snapshot
> from Poky/Yocto (equivalent to 1.8 release) with my own $DISTRO
>
> $ bitbake nand-installer-image
> NOTE: Started PRServer with DBfile:
> /home/gary/tmp/p0381_2015-05-05/p0381_build/cache/prserv.sqlite3, IP:
> 127.0.0.1, PORT: 41585, PID: 460 Loading cache: 100%
> |##########################################################################
> #########| ETA: 00:00:00 Loaded 1708 entries from dependency cache.
> NOTE: Resolving any missing task queue dependencies
> ERROR: Nothing RPROVIDES 'virtual/bootloader' (but
> /home/gary/tmp/p0381_2015-05-05/opt/amltd/poky/meta-amltd/packages/packageg
> roups /packagegroup-amltd.bb RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'virtual/bootloader' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['virtual/bootloader']
> NOTE: Runtime target 'packagegroup-amltd-boot' is unbuildable,
> removing... Missing or unbuildable dependency chain was:
> ['packagegroup-amltd-boot', 'virtual/bootloader'] ERROR: Required build
> target 'nand-installer-image' has no buildable providers. Missing or
> unbuildable dependency chain was: ['nand-installer-image',
> 'packagegroup-amltd-boot', 'virtual/bootloader']
>
> But, there is such a provider and I can build it (from the same build tree):
> $ bitbake virtual/bootloader
> NOTE: Started PRServer with DBfile:
> /home/gary/tmp/p0381_2015-05-05/p0381_build/cache/prserv.sqlite3, IP:
> 127.0.0.1, PORT: 43428, PID: 515 Loading cache: 100%
> |##########################################################################
> #########| ETA: 00:00:00 Loaded 1708 entries from dependency cache.
> NOTE: Resolving any missing task queue dependencies
>
> Build Configuration:
> BB_VERSION = "1.27.0"
> BUILD_SYS = "i686-linux"
> NATIVELSBSTRING = "Fedora-17"
> TARGET_SYS = "arm-amltd-linux-gnueabi"
> MACHINE = "teton-p0381"
> DISTRO = "amltd"
> DISTRO_VERSION = "1.8+snapshot-2015-05-05"
> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa7"
> TARGET_FPU = "vfp-neon"
> meta
> meta-oe
> meta-amltd
> meta-teton-ls1-p0381
> meta-fsl-arm
> meta-fsl-arm-extra
> meta-browser = "<unknown>:<unknown>"
>
> NOTE: Preparing RunQueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> ...
>
> After much research, I found that this is happening because I have
> MACHINE_EXTRA_RRECOMMENDS="virtual/bootloader
> linux-firmware-iwlwifi-5xxx"
>
> If I remove the 'virtual/bootloader' from MACHINE_EXTRA_RRECOMMENDS,
> the confusion (and error) go away. Any ideas what's happening and why
> I might be getting this confusing error?
The confusion here is between runtime targets (package names, i.e. what you
should specify in MACHINE_EXTRA_RRECOMMENDS) and build-time targets e.g.
virtual/bootloader. virtual/bootloader is not a runtime target (hence "Nothing
RPROVIDES ..." and thus doesn't belong in MACHINE_EXTRA_RRECOMMENDS. I suspect
what you want instead is:
EXTRA_IMAGEDEPENDS += "virtual/bootloader"
Cheers,
Paul
--
Paul Eggleton
Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Confusing error
2015-05-05 15:21 ` Paul Eggleton
@ 2015-05-05 15:58 ` Gary Thomas
0 siblings, 0 replies; 5+ messages in thread
From: Gary Thomas @ 2015-05-05 15:58 UTC (permalink / raw)
To: Paul Eggleton; +Cc: yocto
On 2015-05-05 09:21, Paul Eggleton wrote:
> Hi Gary,
>
> On Tuesday 05 May 2015 08:44:47 Gary Thomas wrote:
>> I'm getting a very confusing error from bitbake. I'm using a snapshot
>> from Poky/Yocto (equivalent to 1.8 release) with my own $DISTRO
>>
>> $ bitbake nand-installer-image
>> NOTE: Started PRServer with DBfile:
>> /home/gary/tmp/p0381_2015-05-05/p0381_build/cache/prserv.sqlite3, IP:
>> 127.0.0.1, PORT: 41585, PID: 460 Loading cache: 100%
>> |##########################################################################
>> #########| ETA: 00:00:00 Loaded 1708 entries from dependency cache.
>> NOTE: Resolving any missing task queue dependencies
>> ERROR: Nothing RPROVIDES 'virtual/bootloader' (but
>> /home/gary/tmp/p0381_2015-05-05/opt/amltd/poky/meta-amltd/packages/packageg
>> roups /packagegroup-amltd.bb RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'virtual/bootloader' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['virtual/bootloader']
>> NOTE: Runtime target 'packagegroup-amltd-boot' is unbuildable,
>> removing... Missing or unbuildable dependency chain was:
>> ['packagegroup-amltd-boot', 'virtual/bootloader'] ERROR: Required build
>> target 'nand-installer-image' has no buildable providers. Missing or
>> unbuildable dependency chain was: ['nand-installer-image',
>> 'packagegroup-amltd-boot', 'virtual/bootloader']
>>
>> But, there is such a provider and I can build it (from the same build tree):
>> $ bitbake virtual/bootloader
>> NOTE: Started PRServer with DBfile:
>> /home/gary/tmp/p0381_2015-05-05/p0381_build/cache/prserv.sqlite3, IP:
>> 127.0.0.1, PORT: 43428, PID: 515 Loading cache: 100%
>> |##########################################################################
>> #########| ETA: 00:00:00 Loaded 1708 entries from dependency cache.
>> NOTE: Resolving any missing task queue dependencies
>>
>> Build Configuration:
>> BB_VERSION = "1.27.0"
>> BUILD_SYS = "i686-linux"
>> NATIVELSBSTRING = "Fedora-17"
>> TARGET_SYS = "arm-amltd-linux-gnueabi"
>> MACHINE = "teton-p0381"
>> DISTRO = "amltd"
>> DISTRO_VERSION = "1.8+snapshot-2015-05-05"
>> TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa7"
>> TARGET_FPU = "vfp-neon"
>> meta
>> meta-oe
>> meta-amltd
>> meta-teton-ls1-p0381
>> meta-fsl-arm
>> meta-fsl-arm-extra
>> meta-browser = "<unknown>:<unknown>"
>>
>> NOTE: Preparing RunQueue
>> NOTE: Executing SetScene Tasks
>> NOTE: Executing RunQueue Tasks
>> ...
>>
>> After much research, I found that this is happening because I have
>> MACHINE_EXTRA_RRECOMMENDS="virtual/bootloader
>> linux-firmware-iwlwifi-5xxx"
>>
>> If I remove the 'virtual/bootloader' from MACHINE_EXTRA_RRECOMMENDS,
>> the confusion (and error) go away. Any ideas what's happening and why
>> I might be getting this confusing error?
>
> The confusion here is between runtime targets (package names, i.e. what you
> should specify in MACHINE_EXTRA_RRECOMMENDS) and build-time targets e.g.
> virtual/bootloader. virtual/bootloader is not a runtime target (hence "Nothing
> RPROVIDES ..." and thus doesn't belong in MACHINE_EXTRA_RRECOMMENDS. I suspect
> what you want instead is:
>
> EXTRA_IMAGEDEPENDS += "virtual/bootloader"
Thanks for the explanation, that fixes my problem.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Confusing error
@ 2017-01-12 10:19 Gary Thomas
2017-01-12 10:25 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2017-01-12 10:19 UTC (permalink / raw)
To: yocto@yoctoproject.org
Lately I've been seeing errors like these:
ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
deterministic and this needs to be fixed.
ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
deterministic and this needs to be fixed.
ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
deterministic and this needs to be fixed.
WARNING: u-boot-fw-utils-2011.06-r1 do_package_qa: QA Issue: No GNU_HASH in the elf binary:
'/build/p7619_2016-02-23/tmp/work/teton_p7620-amltd-linux-gnueabi/u-boot-fw-utils/2011.06-r1/packages-split/u-boot-fw-utils/sbin/fw_printenv'
No GNU_HASH in the elf binary:
'/build/p7619_2016-02-23/tmp/work/teton_p7620-amltd-linux-gnueabi/u-boot-fw-utils/2011.06-r1/packages-split/u-boot-fw-utils/sbin/fw_setenv'
[ldflags]
ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
deterministic and this needs to be fixed.
I'm not sure what triggers these errors - I do have more than
one bitbake build running (separate directories). I have a local
copy of the metadata and it was not touched during these builds.
I'm using Poky/Yocto rev 840e221ea7c35177fda37af618c4727fa7754789
but I've seen them for a couple of months now.
Ideas?
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Confusing error
2017-01-12 10:19 Gary Thomas
@ 2017-01-12 10:25 ` Gary Thomas
0 siblings, 0 replies; 5+ messages in thread
From: Gary Thomas @ 2017-01-12 10:25 UTC (permalink / raw)
To: yocto
On 2017-01-12 11:19, Gary Thomas wrote:
> Lately I've been seeing errors like these:
>
> ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
> basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
> deterministic and this needs to be fixed.
> ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
> basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
> deterministic and this needs to be fixed.
> ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
> basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
> deterministic and this needs to be fixed.
> WARNING: u-boot-fw-utils-2011.06-r1 do_package_qa: QA Issue: No GNU_HASH in the elf binary:
> '/build/p7619_2016-02-23/tmp/work/teton_p7620-amltd-linux-gnueabi/u-boot-fw-utils/2011.06-r1/packages-split/u-boot-fw-utils/sbin/fw_printenv'
>
> No GNU_HASH in the elf binary:
> '/build/p7619_2016-02-23/tmp/work/teton_p7620-amltd-linux-gnueabi/u-boot-fw-utils/2011.06-r1/packages-split/u-boot-fw-utils/sbin/fw_setenv'
> [ldflags]
Sorry, ignore this error (overly ambitious cut&paste). My question for this
thread it just about the metadata errors...
> ERROR: When reparsing /local/poky-cutting-edge/meta/recipes-core/base-files/base-files_3.0.14.bb.do_install, the
> basehash value changed from 9505eae6877992fa6b9e3148cf3752eb to f19b1f7c30c515ab9ef905f96b6eaa5e. The metadata is not
> deterministic and this needs to be fixed.
>
> I'm not sure what triggers these errors - I do have more than
> one bitbake build running (separate directories). I have a local
> copy of the metadata and it was not touched during these builds.
>
> I'm using Poky/Yocto rev 840e221ea7c35177fda37af618c4727fa7754789
> but I've seen them for a couple of months now.
>
> Ideas?
>
> Thanks
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-01-12 10:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-05 14:44 Confusing error Gary Thomas
2015-05-05 15:21 ` Paul Eggleton
2015-05-05 15:58 ` Gary Thomas
-- strict thread matches above, loose matches on Subject: below --
2017-01-12 10:19 Gary Thomas
2017-01-12 10:25 ` Gary Thomas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.