* Re: FreeBSD Dom0 IOMMU issues
2015-05-07 11:43 ` Jan Beulich
@ 2015-05-07 19:39 ` Michael Dexter
2015-05-08 8:06 ` Jan Beulich
0 siblings, 1 reply; 13+ messages in thread
From: Michael Dexter @ 2015-05-07 19:39 UTC (permalink / raw)
To: Jan Beulich; +Cc: yang.z.zhang, xen-devel, kevin.tian, royger
[-- Attachment #1: Type: text/plain, Size: 873 bytes --]
On 5/7/15 4:43 AM, Jan Beulich wrote:
> The guest-start-without-X-in-Dom0 aspect would be of particular
> interest - can you confirm that part too? And just to confirm -
> according to the config file you do not pass through any device to
> the DomU (which implies no IOMMU page tables being set up for
> it at all)?
I have sent the without-X output and correct, I am not passing any
devices through. As I understand it however, the HVM Dom0 has all
devices passed through it using the IOMMU. I could be mistaken.
I am attaching the output from a quad-core i5 Intel board system that is
also of the Sandy Bridge generation. (I am very fond of Sandy Bridge and
the ThinkPads that include it).
The first VM boot resulted in a DomU panic and the remaining ones in a
freeze (no panic message) but with many IOMMU errors that may be of
interest to you.
Michael Dexter
[-- Attachment #2: i5output2.txt --]
[-- Type: text/plain, Size: 195955 bytes --]
Script started on Thu May 7 12:31:11 2015
root@x220:~ # sh serial.sh
Connected
Xen 4.5.0
(XEN) Xen version 4.5.0 (root@) (gcc48 (FreeBSD Ports Collection) 4.8.4) debug=n Sat May 2 05:24:27 UTC 2015
(XEN) Latest ChangeSet:
(XEN) Bootloader: FreeBSD Loader
(XEN) Command line: dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 console=com1 com1=115200,8n1,pci guest_loglvl=all loglvl=all iommu=debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ac00 (usable)
(XEN) 000000000009ac00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040000000 (usable)
(XEN) 0000000040000000 - 0000000040200000 (reserved)
(XEN) 0000000040200000 - 00000000bc859000 (usable)
(XEN) 00000000bc859000 - 00000000bc862000 (ACPI data)
(XEN) 00000000bc862000 - 00000000bc8ac000 (ACPI NVS)
(XEN) 00000000bc8ac000 - 00000000bc8b4000 (usable)
(XEN) 00000000bc8b4000 - 00000000bcbc5000 (reserved)
(XEN) 00000000bcbc5000 - 00000000bcbc6000 (usable)
(XEN) 00000000bcbc6000 - 00000000bcbd6000 (reserved)
(XEN) 00000000bcbd6000 - 00000000bcbf5000 (ACPI NVS)
(XEN) 00000000bcbf5000 - 00000000bcc19000 (reserved)
(XEN) 00000000bcc19000 - 00000000bcc5c000 (ACPI NVS)
(XEN) 00000000bcc5c000 - 00000000bce7c000 (reserved)
(XEN) 00000000bce7c000 - 00000000bd000000 (usable)
(XEN) 00000000bd800000 - 00000000bfa00000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed40000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000043e600000 (usable)
(XEN) ACPI: RSDP 000F0450, 0024 (r2 INTEL)
(XEN) ACPI: XSDT BC859070, 0064 (r1 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: FACP BC860B50, 00F4 (r4 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: DSDT BC859168, 79E1 (r2 INTEL DQ67EP 16 INTL 20051117)
(XEN) ACPI: FACS BCBDBF80, 0040
(XEN) ACPI: APIC BC860C48, 0072 (r3 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: TCPA BC860CC0, 0032 (r2 INTEL DQ67EP 1 MSFT 1000013)
(XEN) ACPI: SSDT BC860CF8, 0102 (r1 INTEL DQ67EP 1 MSFT 3000001)
(XEN) ACPI: MCFG BC860E00, 003C (r1 INTEL DQ67EP 1072009 MSFT 97)
(XEN) ACPI: HPET BC860E40, 0038 (r1 INTEL DQ67EP 1072009 AMI. 4)
(XEN) ACPI: ASF! BC860E78, 00A0 (r32 INTEL DQ67EP 1 TFSM F4240)
(XEN) ACPI: DMAR BC860F18, 00E8 (r1 INTEL DQ67EP 1 INTL 1)
(XEN) System RAM: 16299MB (16690688kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000043e600000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fda00
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - bcbdbf80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[bcbdbf8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:788: Host address width 36
(XEN) [VT-D]dmar.c:802: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed90000
(XEN) [VT-D]iommu.c:1136: drhd->address = fed90000 iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:1138: cap = c0000020e60262 ecap = f0101a
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:802: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed91000
(XEN) [VT-D]iommu.c:1136: drhd->address = fed91000 iommu->reg = ffff82c000203000
(XEN) [VT-D]iommu.c:1138: cap = c9008020660262 ecap = f0105a
(XEN) [VT-D]dmar.c:397: IOAPIC: 0000:f0:1f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.1
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.2
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.3
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.4
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.5
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.6
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.7
(XEN) [VT-D]dmar.c:486: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:807: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1d.0
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1a.0
(XEN) [VT-D]dmar.c:676: RMRR region: base_addr bcbac000 end_address bcbbafff
(XEN) [VT-D]dmar.c:807: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:676: RMRR region: base_addr bd800000 end_address bf9fffff
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2500.089 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:719: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) alt table ffff82d0802b4bb0 -> ffff82d0802b5d20
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 3f
(XEN) PCI: Not using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 32 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 600 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 -> 0xffffffff819684b8
(XEN) Dom0 symbol map 0xffffffff819684b8 -> 0xffffffff81c6d3b0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000042c000000->0000000430000000 (506992 pages to be allocated)
(XEN) Init. ramdisk: 000000043e270000->000000043e600000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff81c6d3b0
(XEN) Init. ramdisk: ffffffff81c6e000->ffffffff81ffe000
(XEN) Phys-Mach map: ffffffff81ffe000->ffffffff823fe000
(XEN) Start info: ffffffff823fe000->ffffffff823ff4b4
(XEN) Page tables: ffffffff82400000->ffffffff82417000
(XEN) Boot stack: ffffffff82417000->ffffffff82418000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff80d63000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) [VT-D]iommu.c:1420: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:02.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.2
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.3
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:19.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1a.0
(XEN) [VT-D]iommu.c:1434: d0:PCIe: map 0000:00:1b.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1d.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.2
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.3
(XEN) [VT-D]iommu.c:1434: d0:PCIe: map 0000:03:00.0
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000203000
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) .<1>[VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Read] Request device [0000:03:00.0] fault addr bc9b1000, iommu reg = ffff82c000203000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu ffff830434da8a20 dev 0000:03:00.0 gmfn bc9b1
(XEN) root_entry = ffff830434da3000
(XEN) root_entry[3] = 2b1954001
(XEN) context = ffff8302b1954000
(XEN) context[0] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 2
(XEN) l3[2] = 24015b003
(XEN) l2 = ffff83024015b000
(XEN) l2_index = 1e4
(XEN) l2[1e4] = 0
(XEN) l2[1e4] not present
(XEN) .................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 280kB init memory.
FreeBSD PVH running on xen-3.0-x86_64p
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009ac00
SMAP type=02 base=000000000009ac00 len=0000000000005400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000001ff00000
SMAP type=02 base=0000000020000000 len=0000000000200000
SMAP type=01 base=0000000020200000 len=000000001fe00000
SMAP type=02 base=0000000040000000 len=0000000000200000
SMAP type=01 base=0000000040200000 len=0000000040265000
SMAP type=03 base=00000000bc859000 len=0000000000009000
SMAP type=04 base=00000000bc862000 len=000000000004a000
SMAP type=02 base=00000000bc8b4000 len=0000000000311000
SMAP type=02 base=00000000bcbc6000 len=0000000000010000
SMAP type=04 base=00000000bcbd6000 len=000000000001f000
SMAP type=02 base=00000000bcbf5000 len=0000000000024000
SMAP type=04 base=00000000bcc19000 len=0000000000043000
SMAP type=02 base=00000000bcc5c000 len=0000000000220000
SMAP type=02 base=00000000bd800000 len=0000000002200000
SMAP type=02 base=00000000fed1c000 len=0000000000024000
SMAP type=02 base=00000000ff000000 len=0000000001000000
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
APIC: Using the Xen PV enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 6 (AP)
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r282110: Mon Apr 27 20:49:15 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
(XEN) irq.c:380: Dom0 callback via changed to Direct Vector 0x93
Preloaded elf multiboot kernel "/boot/xen" at 0xffffffff81c6e000.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81c6e198.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81c6e270.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81c6ea58.
Calibrating TSC clock ... TSC clock: 2500017776 Hz
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.02-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA,CMOV,PAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant, performance statistics
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2152091648 (2052 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002448000 - 0x000000001fffffff, 498827264 bytes (121784 pages)
0x0000000020200000 - 0x000000003fffffff, 534773760 bytes (130560 pages)
0x0000000040200000 - 0x000000007cfbefff, 1021046784 bytes (249279 pages)
avail memory = 2031779840 (1937 MB)
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x001000-0x001fff at 0xfffffe00929f8000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
Xen interrupt system initialized
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
ACPI: XSDT 0x00000000BC859070 000064 (v01 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: FACP 0x00000000BC860B50 0000F4 (v04 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BC859168 0079E1 (v02 INTEL DQ67EP 00000016 INTL 20051117)
ACPI: FACS 0x00000000BCBDBF80 000040
ACPI: APIC 0x00000000BC860C48 000072 (v03 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: TCPA 0x00000000BC860CC0 000032 (v02 INTEL DQ67EP 00000001 MSFT 01000013)
ACPI: SSDT 0x00000000BC860CF8 000102 (v01 INTEL DQ67EP 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BC860E00 00003C (v01 INTEL DQ67EP 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BC860E40 000038 (v01 INTEL DQ67EP 01072009 AMI. 00000004)
ACPI: ASF! 0x00000000BC860E78 0000A0 (v32 INTEL DQ67EP 00000001 TFSM 000F4240)
ACPI: XMAR 0x00000000BC860F18 0000E8 (v01 INTEL DQ67EP 00000001 INTL 00000001)
MADT: Interrupt override: source 0, irq 2
xen: register IRQ#2
MADT: Interrupt override: source 9, irq 9
xen: register IRQ#9
xen: register IRQ#1
xen: register IRQ#3
xen: register IRQ#4
xen: register IRQ#5
xen: register IRQ#6
xen: register IRQ#7
xen: register IRQ#8
xen: register IRQ#10
xen: register IRQ#11
xen: register IRQ#12
xen: register IRQ#13
xen: register IRQ#14
xen: register IRQ#15
cpu0 BSP XEN PV LAPIC
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
netmap: loaded module
null: <full device, null device, zero device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dec6c0, 0) error 19
io: <I/O>
VMBUS: load
hptnr: R750/DC7280 controller driver v1.1.1
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
Grant table initialized
xc0: <Xen Console> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xen_et0: registered as a time-of-day clock (resolution 10000000us, adjustment 5.000000000s)
pvcpu0: <Xen PV CPU> on xenpv0
pvcpu1: <Xen PV CPU> on xenpv0
pvcpu2: <Xen PV CPU> on xenpv0
pvcpu3: <Xen PV CPU> on xenpv0
xenstore0: <XenStore> on xenpv0
xsd_dev0: <Xenstored user-space device> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <INTEL DQ67EP> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: not installed as time-of-day clock: clock xen_et has higher resolution
Event timer "RTC" frequency 32768 Hz quality 0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xff
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0xcf7
pcib0: decoding 4 range 0x3b0-0x3df
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xbfa00000-0xffffffff
pci0: <Xen ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x0100, revid=0x09
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) PCI add device 0000:00:00.0
found-> vendor=0x8086, dev=0x0101, revid=0x09
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
xen: register IRQ#16
secbus=1, subbus=1
(XEN) PCI add device 0000:00:01.0
found-> vendor=0x8086, dev=0x0102, revid=0x09
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xfe000000, size 22, enabled
pcib0: allocated type 3 (0xfe000000-0xfe3fffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled
pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:02.0
found-> vendor=0x8086, dev=0x1c3a, revid=0x04
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0018, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe52a000, size 4, enabled
pcib0: allocated type 3 (0xfe52a000-0xfe52a00f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:16.0
found-> vendor=0x8086, dev=0x1c3c, revid=0x04
domain=0, bus=0, slot=22, func=2
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf130, size 3, enabled
pcib0: allocated type 4 (0xf130-0xf137) for rid 10 of pci0:0:22:2
map[14]: type I/O Port, range 32, base 0xf120, size 2, enabled
pcib0: allocated type 4 (0xf120-0xf123) for rid 14 of pci0:0:22:2
map[18]: type I/O Port, range 32, base 0xf110, size 3, enabled
pcib0: allocated type 4 (0xf110-0xf117) for rid 18 of pci0:0:22:2
map[1c]: type I/O Port, range 32, base 0xf100, size 2, enabled
pcib0: allocated type 4 (0xf100-0xf103) for rid 1c of pci0:0:22:2
map[20]: type I/O Port, range 32, base 0xf0f0, size 4, enabled
pcib0: allocated type 4 (0xf0f0-0xf0ff) for rid 20 of pci0:0:22:2
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
xen: register IRQ#18
(XEN) PCI add device 0000:00:16.2
found-> vendor=0x8086, dev=0x1c3d, revid=0x04
domain=0, bus=0, slot=22, func=3
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf0e0, size 3, enabled
pcib0: allocated type 4 (0xf0e0-0xf0e7) for rid 10 of pci0:0:22:3
map[14]: type Memory, range 32, base 0xfe529000, size 12, enabled
pcib0: allocated type 3 (0xfe529000-0xfe529fff) for rid 14 of pci0:0:22:3
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
xen: register IRQ#17
(XEN) PCI add device 0000:00:16.3
found-> vendor=0x8086, dev=0x1502, revid=0x04
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfe500000, size 17, enabled
pcib0: allocated type 3 (0xfe500000-0xfe51ffff) for rid 10 of pci0:0:25:0
map[14]: type Memory, range 32, base 0xfe528000, size 12, enabled
pcib0: allocated type 3 (0xfe528000-0xfe528fff) for rid 14 of pci0:0:25:0
map[18]: type I/O Port, range 32, base 0xf080, size 5, enabled
pcib0: allocated type 4 (0xf080-0xf09f) for rid 18 of pci0:0:25:0
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
xen: register IRQ#20
(XEN) PCI add device 0000:00:19.0
found-> vendor=0x8086, dev=0x1c2d, revid=0x04
domain=0, bus=0, slot=26, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe527000, size 10, enabled
pcib0: allocated type 3 (0xfe527000-0xfe5273ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
ehci early: SMM active, request owner change
(XEN) PCI add device 0000:00:1a.0
found-> vendor=0x8086, dev=0x1c20, revid=0x04
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe520000, size 14, enabled
pcib0: allocated type 3 (0xfe520000-0xfe523fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
xen: register IRQ#22
(XEN) PCI add device 0000:00:1b.0
found-> vendor=0x8086, dev=0x1c10, revid=0xb4
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
secbus=2, subbus=2
(XEN) PCI add device 0000:00:1c.0
found-> vendor=0x8086, dev=0x1c1c, revid=0xb4
domain=0, bus=0, slot=28, func=6
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=3, subbus=3
(XEN) PCI add device 0000:00:1c.6
found-> vendor=0x8086, dev=0x1c26, revid=0x04
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe526000, size 10, enabled
pcib0: allocated type 3 (0xfe526000-0xfe5263ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
xen: register IRQ#23
ehci early: SMM active, request owner change
(XEN) PCI add device 0000:00:1d.0
found-> vendor=0x8086, dev=0x244e, revid=0xa4
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=4, subbus=4
(XEN) PCI add device 0000:00:1e.0
found-> vendor=0x8086, dev=0x1c4e, revid=0x04
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:1f.0
found-> vendor=0x8086, dev=0x1c02, revid=0x04
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xf0d0, size 3, enabled
pcib0: allocated type 4 (0xf0d0-0xf0d7) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0xf0c0, size 2, enabled
pcib0: allocated type 4 (0xf0c0-0xf0c3) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0xf0b0, size 3, enabled
pcib0: allocated type 4 (0xf0b0-0xf0b7) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0xf0a0, size 2, enabled
pcib0: allocated type 4 (0xf0a0-0xf0a3) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled
pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xfe525000, size 11, enabled
pcib0: allocated type 3 (0xfe525000-0xfe5257ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
xen: register IRQ#19
(XEN) PCI add device 0000:00:1f.2
found-> vendor=0x8086, dev=0x1c22, revid=0x04
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0xfe524000, size 8, enabled
pcib0: allocated type 3 (0xfe524000-0xfe5240ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled
pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
(XEN) PCI add device 0000:00:1f.3
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pci1: <Xen ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
agp0: AGP_SNB_GFX_MODE: 00000000
agp0: AGP_SNB_GCC1: 0x0209
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 524288
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe529000-0xfe529fff irq 17 at device 22.3 on pci0
uart2: fast interrupt
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf080-0xf09f mem 0xfe500000-0xfe51ffff,0xfe528000-0xfe528fff irq 20 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:22:4d:51:4c:0c
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe527000-0xfe5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe520000-0xfe523fff irq 22 at device 27.0 on pci0
hdac0: PCI card vendor: 0x8086, device: 0x200f
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
hdac0: using IRQ 257 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pci2: <Xen ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pcib0: allocated type 3 (0xfe400000-0xfe4fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xfe400000-0xfe4fffff
pci3: <Xen ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x1033, dev=0x0194, revid=0x03
domain=0, bus=3, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xfe400000, size 13, enabled
pcib3: allocated memory range (0xfe400000-0xfe401fff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
(XEN) PCI add device 0000:03:00.0
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
xhci0: using IRQ 258 for MSI
xhci0: MSI enabled
usbus1 on xhci0
xhci0: usbpf: Attached
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe526000-0xfe5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
ehci1: usbpf: Attached
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: special decode subtractive
pci4: <Xen ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa: isa0 already exists; skipping it
device_attach: isab0 attach returned 6
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe525000-0xfe5257ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
ahci0: using IRQ 259 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: not probed (disabled)
ahcich2: not probed (disabled)
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: HPCP ESP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: HPCP ESP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
ACPI: Enabled 3 GPEs in block 00 to 3F
acpi0: wakeup code va 0xfffffe0096c75000 pa 0x4000
ahc_isa_identify 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
device_attach: atkbd0 attach returned 6
psm0: unable to allocate IRQ
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
usbus0: 480Mbps High Speed USB v2.0
procfs registered
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x8086200f
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 23 99130140 4 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 24 01a19c50 5 0 Mic Jack 1/8 Rear Pink 12
hdaa0: 25 02a19960 6 0 Mic Jack 1/8 Front Pink 9
hdaa0: 26 0181345f 5 15 Line-in Jack 1/8 Rear Blue 4
hdaa0: 27 02214120 2 0 Headphones Jack 1/8 Front Green 1
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 29 4004c601 0 1 Line-out None RCA 0x00 Res.C 6
hdaa0: 30 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 23 99130140 4 0 Speakerata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ugen1.2: <vendor 0x05e3> at usbus1
uhub3: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 1> on usbus1
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub3: 4 ports with 4 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ahcich0: AHCI reset...
ahcich0: SATA connect time=1800us status=00000113
ahcich0: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=900us status=00000113
ahcich3: AHCI reset: device found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
ahcich0: AHCI reset: device ready after 100ms
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x05e3> at usbus1
uhub6: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 2> on usbus1
uhub5: 8 ports with 8 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <BTC> at usbus1
ukbd0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen1.5: <Logitech> at usbus1
ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080)
ahcich3: Poll timeout on slot 2 port 0
ahcich3: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 80 serr 00000000 cmd 0000c217
(aprobe2:ahcich3:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:0:0): CAM status: Command timeout
(aprobe2:ahcich3:0:0:0): Error 5, Retries exhausted
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
GEOM: new disk ada0
ada0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
ada0: Serial Number 5198PGXPT
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
pass0 at ahcich0 bus 0 scbus2 target 0 lun 0
pass0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
pass0: Serial Number 5198PGXPT
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahciem0 bus 0 scbus6 target 0 lun 0
pass1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
random: unblocking device.
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
cpu1 AP XEN PV LAPIC
SMP: AP CPU #3 Launched!
cpu3 AP XEN PV LAPIC
SMP: AP CPU #2 Launched!
cpu2 AP XEN PV LAPIC
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1250008888 Hz quality -100
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
start_init: trying /sbin/init
Setting hostuuid: f2ef92ba-0480-e011-a3af-000e0ca9794e.
Setting hostid: 0x643fc703.
warning: total configured swap (4194304 pages) exceeds maximum recommended amount (4016272 pages).
warning: increase kern.maxswzone or reduce amount of swap.
Starting file system checks:
Mounting local file systems:.
Setting hostname: i5.
Feeding entropy:.
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
Starting Network: lo0 em0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:22:4d:51:4c:0c
inet 192.168.1.215 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Starting devd.
uhid0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 4> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
Starting ums0 moused.
add net default: gateway 192.168.1.1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/gcc48 /usr/local/llvm35/lib
32-bit compatibility ldconfig path: /usr/lib32
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Starting casperd.
Clearing /tmp (X related).
Cleaning xenstore database.
Starting xenservices: xenstored, xenconsoled.May 7 11:22:50 i5 xenstored: Checking store ...
May 7 11:22:50 i5 xenstored: Checking store complete.
WARNING: Failed to open connection to gnttab
xenballoon0: <Xen Balloon Device> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_back0: <Xen Backend Devices> on xenstore0
Setting domain 0 name, domid and JSON config...
Done setting up Dom0
Updating motd:.
Mounting late file systems:.
Starting default mousedmoused: unable to open /dev/psm0: No such file or directory
.
Starting dbus.
Starting hald.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.
Thu May 7 11:22:52 PDT 2015
FreeBSD/amd64 (i5) (xc0)
login: May 7 11:23:09 i5 login: ROOT LOGIN (root) ON ttyv0
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel SandyBridge> on vgapci0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
vgapci0: using IRQ 260 for MSI
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-3
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-3
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
drmn0: No ACPI video bus found
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
error: [drm:pid798:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 16000000, was 12000000
FreeBSD/amd64 (i5) (xc0)
login: root
Password:
May 7 11:23:29 i5 login: ROOT LOGIN (root) ON xc0
Last login: Thu May 7 11:23:09 on ttyv0
FreeBSD 11.0-CURRENT (GENERIC) #0 r282110: Mon Apr 27 20:49:15 UTC 2015
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories: https://www.FreeBSD.org/security/
FreeBSD Handbook: https://www.FreeBSD.org/handbook/
FreeBSD FAQ: https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums: https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with: pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed: freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages: man man
FreeBSD directory layout: man hier
Edit /etc/motd to change this login announcement.
root@i5:~ # cd xo\a\b^[[Ke\an
root@i5:~/xen # cat fbsdse\arial.cfg
builder="hvm"
memory = 2048
vcpus = 2
name = "FreeBSD"
disk = [ '/root/xen/fbsdserial.img,raw,hda,w' ]
boot = "c"
usbdevice = 'tablet'
serial = 'pty'
root@i5:~/xen # cat /boot/loader.conf
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
zfs_load="YES"
autoboot_delay="3"
boot_verbose="YES"
comconsole_speed="115200"
console="vidconsole"
xen_kernel="/boot/xen"
xen_cmdline="dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 console=com1 com1=115200,8n1,pci guest_loglvl=all loglvl=all iommu=debug"
# sync_console
# iommu=debug,no-qinval
root@i5:~/xen # xl -vvvv create -c fbsse\b^[[K\b^[[Kdse\arial.cfg
Parsing config from fbsdserial.cfg
libxl: debug: libxl_create.c:1501:do_domain_create: ao 0x802c46080: create: how=0x0 callback=0x0 poller=0x802c1f0a0
libxl: debug: libxl_device.c:269:libxl__device_disk_set_backend: Disk vdev=hda spec.backend=unknown
libxl: debug: libxl_device.c:298:libxl__device_disk_set_backend: Disk vdev=hda, using backend phy
libxl: debug: libxl_create.c:907:initiate_domain_create: running bootloader
libxl: debug: libxl_bootloader.c:323:libxl__bootloader_run: not a PV domain, skipping bootloader
libxl: debug: libxl_event.c:629:libxl__ev_xswatch_deregister: watch w=0x802c37770: deregister unregistered
xc: detail: elf_parse_binary: phdr: paddr=0x100000 memsz=0x599ec
xc: detail: elf_parse_binary: memory: 0x100000 -> 0x1599ec
xc: detail: VIRTUAL MEMORY ARRANGEMENT:
xc: detail: Loader: 0000000000100000->00000000001599ec
xc: detail: Modules: 0000000000000000->0000000000000000
xc: detail: TOTAL: 0000000000000000->000000007f800000
xc: detail: ENTRY: 0000000000100000
xc: detail: PHYSICAL MEMORY ALLOCATION:
xc: detail: 4KB PAGES: 0x0000000000000200
xc: detail: 2MB PAGES: 0x00000000000003fb
xc: detail: 1GB PAGES: 0x0000000000000000
xc: detail: elf_load_binary: phdr 0 at 0x80067a000 -> 0x8006ca991
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 2708cb000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 2708cb
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 9
(XEN) l3[9] = 0
(XEN) l3[9] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 270667000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 270667
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 9
(XEN) l3[9] = 0
(XEN) l3[9] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 27097f000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 27097f
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 9
(XEN) l3[9] = 0
(XEN) l3[9] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 270687000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 270687
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 9
(XEN) l3[9] = 0
(XEN) l3[9] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 41(d1) SeaBIOS (version 1.8.1)
(d1) Machine UUID d9085e3d-e6f4-e411-931e-00224d514c0c
(d1) UHCI init on dev 00:01.2 (io=c100)
(d1) Found 0 lpt ports
(d1) Found 1 serial ports
(d1) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d1) ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d1) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (20480 MiBytes)
(d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d1) PS2 keyboard initialized
(d1) All threads complete.
(d1) Scan for option roms
(d1)
(d1) Press F12 for boot menu.
(d1)
(d1) Searching bootorder for: HALT
(d1) drive 0x000f6400: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=41943040
(d1) Space available for UMB: c9800-ef000, f5e20-f6400
(d1) Returned 258048 bytes of ZoneHigh
(d1) e820 map has 6 items:
(d1) 0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d1) 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d1) 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d1) 3: 0000000000100000 - 000000007f7ff000 = 1 RAM
(d1) 4: 000000007f7ff000 - 000000007f800000 = 2 RESERVED
(d1) 5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d1) enter handle_19:
(d1) NULL
(d1) Booting from Hard Disk...
(d1) Booting from 0000:7c00
-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b^[[H^[[J^[[7;46H ``` `^[[8;46Hs` `.....---.......--.``` -/^[[9;46H+o .--` /y:` +.^[[10;46H yo`:. :o `+-^[[11;46H y/ -/` -o/^[[12;46H .- ::/sy+:.^[[13;46H / `-- /^[[14;46H`: :`^[[15;46H`: :`^[[16;46H / /^[[17;46H .- -.^[[18;46H -- -.^[[19;46H `:` `:`^[[20;46H .-- `--.^[[21;46H .---.....----.^[[25;0H^[[1;2H ______ ____ _____ _____ ^[[2;2H| ____| | _ \ / ____| __ \ ^[[3;2H| |___ _ __ ___ ___ | |_) | (___ | | | |^[[4;2H| ___| '__/ _ \/ _ \| _ < \___ \| | | |^[[5;2H| | | | | __/ __/| |_) |____) | |__| |^[[6;2H| | | | | | || | | |^[[7;2H|_| |_| \___|\___||____/|_____/|_____/ ^[[25;0H^[[10;2H|^[[11;2H|^[[12;2H|^[[13;2H|^[[14;2H|^[[15;2H|^[[16;2H|^[[17;2H|^[[18;2H|^[[19;2H|^[[20;2H|^[[21;2H|^[[10;44H|^[[11;44H|^[[12;44H|^[[13;44H|^[[14;44H|^[[15;44H|^[[16;44H|^[[17;44H|^[[18;44H|^[[19;44H|^[[20;44H|^[[21;44H|^[[9;3H-----------------------------------------^[[22;3H-----------------------------------------^[[9;2H+^[[22;2H+^[[9;44H+^[[22;44H+^[[25;0H-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b^[[9;15HWelcome to FreeBSD^[[11;5H1 ^[[11;6H.^[[11;8HBoot Multi User [Enter]^[[12;5H2 ^[[12;6H.^[[12;8HBoot [S]ingle User^[[13;5H3 ^[[13;6H.^[[13;8H[Esc]ape to loader prompt^[[14;5H4 ^[[14;6H.^[[14;8HReboot^[[16;5HOptions:^[[17;5H5 ^[[17;6H.^[[17;8H[K]ernel: kernel (1 of 2)^[[18;5H6 ^[[18;6H.^[[18;8HConfigure Boot [O]ptions...^[[25;0H^[[23;4HAutoboot in 9 seconds. [Space] to pause^[[25;0H^[[23;4HAutoboot in 8 seconds. [Space] to pause^[[25;0H^[[23;4H ^[[25;0H|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b/boot/kernel/kernel text=0x104c6a8 |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\bdata=0x12dbb8+0x3fb0f0 |\b/\b-\b\\b|\b/\b-\b\\b|\bsyms=[0x8+0x148f98/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b+0x8+0x164832|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b]
Booting...
\\b|\b/\b-\b\\b|\bGDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r280862: Mon Mar 30 20:15:11 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
XEN: Hypervisor version 4.5 detected.
(XEN) irq.c:380: Dom1 callback via changed to Direct Vector 0x93
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x9fb82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2139095040 (2040 MB)
avail memory = 2031874048 (1937 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <Xen HVM>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-47 on motherboard
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd1 at kbdmux0
netmap: loaded module
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dfac80, 0) error 19
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xenstore0: <XenStore> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <Xen> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 62500000 Hz quality 950
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
(XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
device_attach: isab0 attach returned 6
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc120-0xc12f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc100-0xc11f irq 23 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
xenpci0: <Xen Platform Device> port 0xc000-0xc0ff mem 0xf2000000-0xf2ffffff irq 24 at device 2.0 on pci0
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf3010000-0xf3010fff at device 3.0 on pci0
vgapci0: Boot video device
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
xenballoon0: <Xen Balloon Device> on xenstore0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_add_device: Device device/suspend/event-channel ignored. State 6
xbd0: Back-end specified ring-pages of 15 is not a power of 2. Limited to 8.
xenbusb_back0: <Xen Backend Devices> on xenstore0
xbd0: 20480MB <Virtual Block Device> at device/vbd/768 on xenbusb_front0
xbd0: attaching as ada0
xbd0: features: flush, write_barrier
xbd0: synchronize cache commands enabled.
random: unblocking device.
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0ugen0.2: <QEMU> at usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
WARNING: / was not properly dismounted
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
groups: lo
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_e(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write ac(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root\0~
[EOT]
root@x220:~ #
root@x220:~ # exit
exit
Script done on Thu May 7 12:36:25 2015
[-- Attachment #3: i5output.txt --]
[-- Type: text/plain, Size: 204349 bytes --]
Script started on Thu May 7 12:09:38 2015
root@x220:~ # sh serial.sh
Connected
May 7 10:59:53 i5 reboot: rebooted by root
May 7 10:59:54 i5 syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 done
All buffers synced.
lock order reversal:
1st 0xfffff800048c5b78 zfs (zfs) @ /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:1831
2nd 0xffffffff8188ba60 allproc (allproc) @ /usr/src/sys/kern/kern_descrip.c:2881
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0097463730
witness_checkorder() at witness_checkorder+0xe26/frame 0xfffffe00974637c0
_sx_slock() at _sx_slock+0x76/frame 0xfffffe0097463800
mountcheckdirs() at mountcheckdirs+0x44/frame 0xfffffe0097463850
dounmount() at dounmount+0x368/frame 0xfffffe00974638d0
vfs_unmountall() at vfs_unmountall+0x61/frame 0xfffffe0097463900
kern_reboot() at kern_reboot+0x4f6/frame 0xfffffe0097463980
sys_reboot() at sys_reboot+0x58/frame 0xfffffe00974639a0
amd64_syscall() at amd64_syscall+0x27f/frame 0xfffffe0097463ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0097463ab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x8008692ac, rsp = 0x7fffffffe9a8, rbp = 0x7fffffffeb10 ---
lock order reversal:
1st 0xfffff8000639eb78 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1229
2nd 0xfffff800048c57c8 zfs_gfs (zfs_gfs) @ /usr/src/sys/cddl/contrib/opensolaris/uts/common/fs/gfs.c:494
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00974632f0
witness_checkorder() at witness_checkorder+0xe26/frame 0xfffffe0097463380
__lockmgr_args() at __lockmgr_args+0xa5c/frame 0xfffffe00974634b0
vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe00974634d0
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xfc/frame 0xfffffe0097463500
_vn_lock() at _vn_lock+0x9a/frame 0xfffffe0097463570
gfs_file_create() at gfs_file_create+0x73/frame 0xfffffe00974635b0
gfs_dir_create() at gfs_dir_create+0x1d/frame 0xfffffe00974635f0
zfsctl_mknode_snapdir() at zfsctl_mknode_snapdir+0x47/frame 0xfffffe0097463650
gfs_dir_lookup() at gfs_dir_lookup+0x191/frame 0xfffffe00974636f0
gfs_vop_lookup() at gfs_vop_lookup+0x1d/frame 0xfffffe0097463710
zfsctl_root_lookup() at zfsctl_root_lookup+0xf5/frame 0xfffffe00974637a0
zfsctl_umount_snapshots() at zfsctl_umount_snapshots+0x80/frame 0xfffffe0097463810
zfs_umount() at zfs_umount+0x7b/frame 0xfffffe0097463850
dounmount() at dounmount+0x40d/frame 0xfffffe00974638d0
vfs_unmountall() at vfs_unmountall+0x61/frame 0xfffffe0097463900
kern_reboot() at kern_reboot+0x4f6/frame 0xfffffe0097463980
sys_reboot() at sys_reboot+0x58/frame 0xfffffe00974639a0
amd64_syscall() at amd64_syscall+0x27f/frame 0xfffffe0097463ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0097463ab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x8008692ac, rsp = 0x7fffffffe9a8, rbp = 0x7fffffffeb10 ---
lock order reversal:
1st 0xfffff800060e87c8 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1229
2nd 0xfffff80004bf3240 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2176
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0097463510
witness_checkorder() at witness_checkorder+0xe26/frame 0xfffffe00974635a0
__lockmgr_args() at __lockmgr_args+0xa5c/frame 0xfffffe00974636d0
vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe00974636f0
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xfc/frame 0xfffffe0097463720
_vn_lock() at _vn_lock+0x9a/frame 0xfffffe0097463790
vget() at vget+0x67/frame 0xfffffe00974637d0
devfs_allocv() at devfs_allocv+0xfd/frame 0xfffffe0097463820
devfs_root() at devfs_root+0x43/frame 0xfffffe0097463850
dounmount() at dounmount+0x342/frame 0xfffffe00974638d0
vfs_unmountall() at vfs_unmountall+0x61/frame 0xfffffe0097463900
kern_reboot() at kern_reboot+0x4f6/frame 0xfffffe0097463980
sys_reboot() at sys_reboot+0x58/frame 0xfffffe00974639a0
amd64_syscall() at amd64_syscall+0x27f/frame 0xfffffe0097463ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0097463ab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x8008692ac, rsp = 0x7fffffffe9a8, rbp = 0x7fffffffeb10 ---
Uptime: 39m21s
\0 Xen 4.5.0
(XEN) Xen version 4.5.0 (root@) (gcc48 (FreeBSD Ports Collection) 4.8.4) debug=n Sat May 2 05:24:27 UTC 2015
(XEN) Latest ChangeSet:
(XEN) Bootloader: FreeBSD Loader
(XEN) Command line: dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 console=com1 com1=115200,8n1,pci guest_loglvl=all loglvl=all iommu=debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ac00 (usable)
(XEN) 000000000009ac00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040000000 (usable)
(XEN) 0000000040000000 - 0000000040200000 (reserved)
(XEN) 0000000040200000 - 00000000bc859000 (usable)
(XEN) 00000000bc859000 - 00000000bc862000 (ACPI data)
(XEN) 00000000bc862000 - 00000000bc8ac000 (ACPI NVS)
(XEN) 00000000bc8ac000 - 00000000bc8b4000 (usable)
(XEN) 00000000bc8b4000 - 00000000bcbc5000 (reserved)
(XEN) 00000000bcbc5000 - 00000000bcbc6000 (usable)
(XEN) 00000000bcbc6000 - 00000000bcbd6000 (reserved)
(XEN) 00000000bcbd6000 - 00000000bcbf5000 (ACPI NVS)
(XEN) 00000000bcbf5000 - 00000000bcc19000 (reserved)
(XEN) 00000000bcc19000 - 00000000bcc5c000 (ACPI NVS)
(XEN) 00000000bcc5c000 - 00000000bce7c000 (reserved)
(XEN) 00000000bce7c000 - 00000000bd000000 (usable)
(XEN) 00000000bd800000 - 00000000bfa00000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed40000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000043e600000 (usable)
(XEN) ACPI: RSDP 000F0450, 0024 (r2 INTEL)
(XEN) ACPI: XSDT BC859070, 0064 (r1 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: FACP BC860B50, 00F4 (r4 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: DSDT BC859168, 79E1 (r2 INTEL DQ67EP 16 INTL 20051117)
(XEN) ACPI: FACS BCBDBF80, 0040
(XEN) ACPI: APIC BC860C48, 0072 (r3 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: TCPA BC860CC0, 0032 (r2 INTEL DQ67EP 1 MSFT 1000013)
(XEN) ACPI: SSDT BC860CF8, 0102 (r1 INTEL DQ67EP 1 MSFT 3000001)
(XEN) ACPI: MCFG BC860E00, 003C (r1 INTEL DQ67EP 1072009 MSFT 97)
(XEN) ACPI: HPET BC860E40, 0038 (r1 INTEL DQ67EP 1072009 AMI. 4)
(XEN) ACPI: ASF! BC860E78, 00A0 (r32 INTEL DQ67EP 1 TFSM F4240)
(XEN) ACPI: DMAR BC860F18, 00E8 (r1 INTEL DQ67EP 1 INTL 1)
(XEN) System RAM: 16299MB (16690688kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000043e600000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fda00
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - bcbdbf80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[bcbdbf8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:788: Host address width 36
(XEN) [VT-D]dmar.c:802: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed90000
(XEN) [VT-D]iommu.c:1136: drhd->address = fed90000 iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:1138: cap = c0000020e60262 ecap = f0101a
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:802: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed91000
(XEN) [VT-D]iommu.c:1136: drhd->address = fed91000 iommu->reg = ffff82c000203000
(XEN) [VT-D]iommu.c:1138: cap = c9008020660262 ecap = f0105a
(XEN) [VT-D]dmar.c:397: IOAPIC: 0000:f0:1f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.1
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.2
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.3
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.4
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.5
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.6
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.7
(XEN) [VT-D]dmar.c:486: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:807: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1d.0
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1a.0
(XEN) [VT-D]dmar.c:676: RMRR region: base_addr bcbac000 end_address bcbbafff
(XEN) [VT-D]dmar.c:807: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:676: RMRR region: base_addr bd800000 end_address bf9fffff
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2500.128 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:719: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) alt table ffff82d0802b4bb0 -> ffff82d0802b5d20
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 3f
(XEN) PCI: Not using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 32 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 600 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 -> 0xffffffff819684b8
(XEN) Dom0 symbol map 0xffffffff819684b8 -> 0xffffffff81c6d3b0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000042c000000->0000000430000000 (506992 pages to be allocated)
(XEN) Init. ramdisk: 000000043e270000->000000043e600000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff81c6d3b0
(XEN) Init. ramdisk: ffffffff81c6e000->ffffffff81ffe000
(XEN) Phys-Mach map: ffffffff81ffe000->ffffffff823fe000
(XEN) Start info: ffffffff823fe000->ffffffff823ff4b4
(XEN) Page tables: ffffffff82400000->ffffffff82417000
(XEN) Boot stack: ffffffff82417000->ffffffff82418000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff80d63000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) [VT-D]iommu.c:1420: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:02.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.2
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.3
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:19.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1a.0
(XEN) [VT-D]iommu.c:1434: d0:PCIe: map 0000:00:1b.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1d.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.2
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.3
(XEN) [VT-D]iommu.c:1434: d0:PCIe: map 0000:03:00.0
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000203000
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) .<1>[VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Read] Request device [0000:03:00.0] fault addr bc9c9000, iommu reg = ffff82c000203000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu ffff830434da8a20 dev 0000:03:00.0 gmfn bc9c9
(XEN) root_entry = ffff830434da3000
(XEN) root_entry[3] = 2b1954001
(XEN) context = ffff8302b1954000
(XEN) context[0] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 2
(XEN) l3[2] = 24015b003
(XEN) l2 = ffff83024015b000
(XEN) l2_index = 1e4
(XEN) l2[1e4] = 0
(XEN) l2[1e4] not present
(XEN) .................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 280kB init memory.
FreeBSD PVH running on xen-3.0-x86_64p
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009ac00
SMAP type=02 base=000000000009ac00 len=0000000000005400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000001ff00000
SMAP type=02 base=0000000020000000 len=0000000000200000
SMAP type=01 base=0000000020200000 len=000000001fe00000
SMAP type=02 base=0000000040000000 len=0000000000200000
SMAP type=01 base=0000000040200000 len=0000000040265000
SMAP type=03 base=00000000bc859000 len=0000000000009000
SMAP type=04 base=00000000bc862000 len=000000000004a000
SMAP type=02 base=00000000bc8b4000 len=0000000000311000
SMAP type=02 base=00000000bcbc6000 len=0000000000010000
SMAP type=04 base=00000000bcbd6000 len=000000000001f000
SMAP type=02 base=00000000bcbf5000 len=0000000000024000
SMAP type=04 base=00000000bcc19000 len=0000000000043000
SMAP type=02 base=00000000bcc5c000 len=0000000000220000
SMAP type=02 base=00000000bd800000 len=0000000002200000
SMAP type=02 base=00000000fed1c000 len=0000000000024000
SMAP type=02 base=00000000ff000000 len=0000000001000000
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
APIC: Using the Xen PV enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 6 (AP)
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r282110: Mon Apr 27 20:49:15 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
(XEN) irq.c:380: Dom0 callback via changed to Direct Vector 0x93
Preloaded elf multiboot kernel "/boot/xen" at 0xffffffff81c6e000.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81c6e198.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81c6e270.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81c6ea58.
Calibrating TSC clock ... TSC clock: 2500016796 Hz
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.02-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA,CMOV,PAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant, performance statistics
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2152091648 (2052 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002448000 - 0x000000001fffffff, 498827264 bytes (121784 pages)
0x0000000020200000 - 0x000000003fffffff, 534773760 bytes (130560 pages)
0x0000000040200000 - 0x000000007cfbefff, 1021046784 bytes (249279 pages)
avail memory = 2031779840 (1937 MB)
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x001000-0x001fff at 0xfffffe00929f8000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
Xen interrupt system initialized
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
ACPI: XSDT 0x00000000BC859070 000064 (v01 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: FACP 0x00000000BC860B50 0000F4 (v04 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BC859168 0079E1 (v02 INTEL DQ67EP 00000016 INTL 20051117)
ACPI: FACS 0x00000000BCBDBF80 000040
ACPI: APIC 0x00000000BC860C48 000072 (v03 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: TCPA 0x00000000BC860CC0 000032 (v02 INTEL DQ67EP 00000001 MSFT 01000013)
ACPI: SSDT 0x00000000BC860CF8 000102 (v01 INTEL DQ67EP 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BC860E00 00003C (v01 INTEL DQ67EP 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BC860E40 000038 (v01 INTEL DQ67EP 01072009 AMI. 00000004)
ACPI: ASF! 0x00000000BC860E78 0000A0 (v32 INTEL DQ67EP 00000001 TFSM 000F4240)
ACPI: XMAR 0x00000000BC860F18 0000E8 (v01 INTEL DQ67EP 00000001 INTL 00000001)
MADT: Interrupt override: source 0, irq 2
xen: register IRQ#2
MADT: Interrupt override: source 9, irq 9
xen: register IRQ#9
xen: register IRQ#1
xen: register IRQ#3
xen: register IRQ#4
xen: register IRQ#5
xen: register IRQ#6
xen: register IRQ#7
xen: register IRQ#8
xen: register IRQ#10
xen: register IRQ#11
xen: register IRQ#12
xen: register IRQ#13
xen: register IRQ#14
xen: register IRQ#15
cpu0 BSP XEN PV LAPIC
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
netmap: loaded module
null: <full device, null device, zero device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dec6c0, 0) error 19
io: <I/O>
VMBUS: load
hptnr: R750/DC7280 controller driver v1.1.1
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
Grant table initialized
xc0: <Xen Console> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xen_et0: registered as a time-of-day clock (resolution 10000000us, adjustment 5.000000000s)
pvcpu0: <Xen PV CPU> on xenpv0
pvcpu1: <Xen PV CPU> on xenpv0
pvcpu2: <Xen PV CPU> on xenpv0
pvcpu3: <Xen PV CPU> on xenpv0
xenstore0: <XenStore> on xenpv0
xsd_dev0: <Xenstored user-space device> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <INTEL DQ67EP> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: not installed as time-of-day clock: clock xen_et has higher resolution
Event timer "RTC" frequency 32768 Hz quality 0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xff
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0xcf7
pcib0: decoding 4 range 0x3b0-0x3df
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xbfa00000-0xffffffff
pci0: <Xen ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x0100, revid=0x09
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) PCI add device 0000:00:00.0
found-> vendor=0x8086, dev=0x0101, revid=0x09
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
xen: register IRQ#16
secbus=1, subbus=1
(XEN) PCI add device 0000:00:01.0
found-> vendor=0x8086, dev=0x0102, revid=0x09
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xfe000000, size 22, enabled
pcib0: allocated type 3 (0xfe000000-0xfe3fffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled
pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:02.0
found-> vendor=0x8086, dev=0x1c3a, revid=0x04
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0018, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe52a000, size 4, enabled
pcib0: allocated type 3 (0xfe52a000-0xfe52a00f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:16.0
found-> vendor=0x8086, dev=0x1c3c, revid=0x04
domain=0, bus=0, slot=22, func=2
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf130, size 3, enabled
pcib0: allocated type 4 (0xf130-0xf137) for rid 10 of pci0:0:22:2
map[14]: type I/O Port, range 32, base 0xf120, size 2, enabled
pcib0: allocated type 4 (0xf120-0xf123) for rid 14 of pci0:0:22:2
map[18]: type I/O Port, range 32, base 0xf110, size 3, enabled
pcib0: allocated type 4 (0xf110-0xf117) for rid 18 of pci0:0:22:2
map[1c]: type I/O Port, range 32, base 0xf100, size 2, enabled
pcib0: allocated type 4 (0xf100-0xf103) for rid 1c of pci0:0:22:2
map[20]: type I/O Port, range 32, base 0xf0f0, size 4, enabled
pcib0: allocated type 4 (0xf0f0-0xf0ff) for rid 20 of pci0:0:22:2
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
xen: register IRQ#18
(XEN) PCI add device 0000:00:16.2
found-> vendor=0x8086, dev=0x1c3d, revid=0x04
domain=0, bus=0, slot=22, func=3
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf0e0, size 3, enabled
pcib0: allocated type 4 (0xf0e0-0xf0e7) for rid 10 of pci0:0:22:3
map[14]: type Memory, range 32, base 0xfe529000, size 12, enabled
pcib0: allocated type 3 (0xfe529000-0xfe529fff) for rid 14 of pci0:0:22:3
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
xen: register IRQ#17
(XEN) PCI add device 0000:00:16.3
found-> vendor=0x8086, dev=0x1502, revid=0x04
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfe500000, size 17, enabled
pcib0: allocated type 3 (0xfe500000-0xfe51ffff) for rid 10 of pci0:0:25:0
map[14]: type Memory, range 32, base 0xfe528000, size 12, enabled
pcib0: allocated type 3 (0xfe528000-0xfe528fff) for rid 14 of pci0:0:25:0
map[18]: type I/O Port, range 32, base 0xf080, size 5, enabled
pcib0: allocated type 4 (0xf080-0xf09f) for rid 18 of pci0:0:25:0
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
xen: register IRQ#20
(XEN) PCI add device 0000:00:19.0
found-> vendor=0x8086, dev=0x1c2d, revid=0x04
domain=0, bus=0, slot=26, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe527000, size 10, enabled
pcib0: allocated type 3 (0xfe527000-0xfe5273ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
ehci early: SMM active, request owner change
(XEN) PCI add device 0000:00:1a.0
found-> vendor=0x8086, dev=0x1c20, revid=0x04
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe520000, size 14, enabled
pcib0: allocated type 3 (0xfe520000-0xfe523fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
xen: register IRQ#22
(XEN) PCI add device 0000:00:1b.0
found-> vendor=0x8086, dev=0x1c10, revid=0xb4
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
secbus=2, subbus=2
(XEN) PCI add device 0000:00:1c.0
found-> vendor=0x8086, dev=0x1c1c, revid=0xb4
domain=0, bus=0, slot=28, func=6
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=3, subbus=3
(XEN) PCI add device 0000:00:1c.6
found-> vendor=0x8086, dev=0x1c26, revid=0x04
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe526000, size 10, enabled
pcib0: allocated type 3 (0xfe526000-0xfe5263ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
xen: register IRQ#23
ehci early: SMM active, request owner change
(XEN) PCI add device 0000:00:1d.0
found-> vendor=0x8086, dev=0x244e, revid=0xa4
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=4, subbus=4
(XEN) PCI add device 0000:00:1e.0
found-> vendor=0x8086, dev=0x1c4e, revid=0x04
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:1f.0
found-> vendor=0x8086, dev=0x1c02, revid=0x04
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xf0d0, size 3, enabled
pcib0: allocated type 4 (0xf0d0-0xf0d7) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0xf0c0, size 2, enabled
pcib0: allocated type 4 (0xf0c0-0xf0c3) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0xf0b0, size 3, enabled
pcib0: allocated type 4 (0xf0b0-0xf0b7) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0xf0a0, size 2, enabled
pcib0: allocated type 4 (0xf0a0-0xf0a3) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled
pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xfe525000, size 11, enabled
pcib0: allocated type 3 (0xfe525000-0xfe5257ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
xen: register IRQ#19
(XEN) PCI add device 0000:00:1f.2
found-> vendor=0x8086, dev=0x1c22, revid=0x04
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0xfe524000, size 8, enabled
pcib0: allocated type 3 (0xfe524000-0xfe5240ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled
pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
(XEN) PCI add device 0000:00:1f.3
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pci1: <Xen ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
agp0: AGP_SNB_GFX_MODE: 00000000
agp0: AGP_SNB_GCC1: 0x0209
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 524288
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe529000-0xfe529fff irq 17 at device 22.3 on pci0
uart2: fast interrupt
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf080-0xf09f mem 0xfe500000-0xfe51ffff,0xfe528000-0xfe528fff irq 20 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:22:4d:51:4c:0c
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe527000-0xfe5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe520000-0xfe523fff irq 22 at device 27.0 on pci0
hdac0: PCI card vendor: 0x8086, device: 0x200f
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
hdac0: using IRQ 257 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pci2: <Xen ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pcib0: allocated type 3 (0xfe400000-0xfe4fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xfe400000-0xfe4fffff
pci3: <Xen ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x1033, dev=0x0194, revid=0x03
domain=0, bus=3, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xfe400000, size 13, enabled
pcib3: allocated memory range (0xfe400000-0xfe401fff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
(XEN) PCI add device 0000:03:00.0
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
xhci0: using IRQ 258 for MSI
xhci0: MSI enabled
usbus1 on xhci0
xhci0: usbpf: Attached
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe526000-0xfe5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
ehci1: usbpf: Attached
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: special decode subtractive
pci4: <Xen ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa: isa0 already exists; skipping it
device_attach: isab0 attach returned 6
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe525000-0xfe5257ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
ahci0: using IRQ 259 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: not probed (disabled)
ahcich2: not probed (disabled)
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: HPCP ESP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: HPCP ESP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
ACPI: Enabled 3 GPEs in block 00 to 3F
acpi0: wakeup code va 0xfffffe0096c75000 pa 0x4000
ahc_isa_identify 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
device_attach: atkbd0 attach returned 6
psm0: unable to allocate IRQ
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
usbus0: 480Mbps High Speed USB v2.0
procfs registered
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x8086200f
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 23 99130140 4 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 24 01a19c50 5 0 Mic Jack 1/8 Rear Pink 12
hdaa0: 25 02a19960 6 0 Mic Jack 1/8 Front Pink 9
hdaa0: 26 0181345f 5 15 Line-in Jack 1/8 Rear Blue 4
hdaa0: 27 02214120 2 0 Headphones Jack 1/8 Front Green 1
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 29 4004c601 0 1 Line-out None RCA 0x00 Res.C 6
hdaa0: 30 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 23 99130140 4 0 Speaker Fixed ATAata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ugen1.2: <vendor 0x05e3> at usbus1
uhub3: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 1> on usbus1
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub3: 4 ports with 4 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ahcich0: AHCI reset...
ahcich0: SATA connect time=1800us status=00000113
ahcich0: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=900us status=00000113
ahcich3: AHCI reset: device found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
ahcich0: AHCI reset: device ready after 100ms
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x05e3> at usbus1
uhub6: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 2> on usbus1
uhub5: 8 ports with 8 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <BTC> at usbus1
ukbd0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen1.5: <Logitech> at usbus1
ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080)
ahcich3: Poll timeout on slot 2 port 0
ahcich3: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 80 serr 00000000 cmd 0000c217
(aprobe2:ahcich3:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:0:0): CAM status: Command timeout
(aprobe2:ahcich3:0:0:0): Error 5, Retries exhausted
GEOM: new disk ada0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
ada0: Serial Number 5198PGXPT
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
pass0 at ahcich0 bus 0 scbus2 target 0 lun 0
pass0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
pass0: Serial Number 5198PGXPT
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahciem0 bus 0 scbus6 target 0 lun 0
pass1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
random: unblocking device.
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
cpu1 AP XEN PV LAPIC
SMP: AP CPU #2 Launched!
cpu2 AP XEN PV LAPIC
SMP: AP CPU #3 Launched!
cpu3 AP XEN PV LAPIC
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1250008398 Hz quality -100
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
start_init: trying /sbin/init
Setting hostuuid: f2ef92ba-0480-e011-a3af-000e0ca9794e.
Setting hostid: 0x643fc703.
warning: total configured swap (4194304 pages) exceeds maximum recommended amount (4016272 pages).
warning: increase kern.maxswzone or reduce amount of swap.
Starting file system checks:
Mounting local file systems:.
Setting hostname: i5.
Feeding entropy:.
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
Starting Network: lo0 em0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:22:4d:51:4c:0c
inet 192.168.1.215 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Starting devd.
uhid0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 4> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
Starting ums0 moused.
add net default: gateway 192.168.1.1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/gcc48 /usr/local/llvm35/lib
32-bit compatibility ldconfig path: /usr/lib32
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Starting casperd.
Clearing /tmp (X related).
Cleaning xenstore database.
Starting xenservices: xenstored, xenconsoled.May 7 11:01:53 i5 xenstored: Checking store ...
May 7 11:01:53 i5 xenstored: Checking store complete.
WARNING: Failed to open connection to gnttab
xenballoon0: <Xen Balloon Device> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_back0: <Xen Backend Devices> on xenstore0
Setting domain 0 name, domid and JSON config...
Done setting up Dom0
Updating motd:.
Mounting late file systems:.
Starting default mousedmoused: unable to open /dev/psm0: No such file or directory
.
Starting dbus.
Starting hald.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.
Thu May 7 11:01:55 PDT 2015
FreeBSD/amd64 (i5) (xc0)
login: root
Password:
May 7 11:10:13 i5 login: ROOT LOGIN (root) ON xc0
Last login: Thu May 7 10:22:05 from 192.168.1.4
FreeBSD 11.0-CURRENT (GENERIC) #0 r282110: Mon Apr 27 20:49:15 UTC 2015
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories: https://www.FreeBSD.org/security/
FreeBSD Handbook: https://www.FreeBSD.org/handbook/
FreeBSD FAQ: https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums: https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with: pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed: freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages: man man
FreeBSD directory layout: man hier
Edit /etc/motd to change this login announcement.
root@i5:~ # ls
.ICEauthority .history .xinitrc
.Xauthority .k5login Desktop
.cache .local boot
.config .login etc
.cshrc .profile xen
.dbus .rnd xen-tools-4.5.0_4.txz
.gvfs .serverauth.793
root@i5:~ # cd xen
root@i5:~/xen # pciconf \b -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x200f8086 chip=0x01008086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x200f8086 chip=0x01018086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x200f8086 chip=0x01028086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family Integrated Graphics Controller'
class = display
subclass = VGA
none0@pci0:0:22:0: class=0x078000 card=0x200f8086 chip=0x1c3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family MEI Controller'
class = simple comms
atapci0@pci0:0:22:2: class=0x010185 card=0x200f8086 chip=0x1c3c8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family IDE-r Controller'
class = mass storage
subclass = ATA
uart2@pci0:0:22:3: class=0x070002 card=0x200f8086 chip=0x1c3d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family KT Controller'
class = simple comms
subclass = UART
em0@pci0:0:25:0: class=0x020000 card=0x200f8086 chip=0x15028086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82579LM Gigabit Network Connection'
class = network
subclass = ethernet
ehci0@pci0:0:26:0: class=0x0c0320 card=0x200f8086 chip=0x1c2d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
hdac0@pci0:0:27:0: class=0x040300 card=0x200f8086 chip=0x1c208086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family High Definition Audio Controller'
class = multimedia
subclass = HDA
pcib2@pci0:0:28:0: class=0x060400 card=0x200f8086 chip=0x1c108086 rev=0xb4 hdr=0x01
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:6: class=0x060400 card=0x200f8086 chip=0x1c1c8086 rev=0xb4 hdr=0x01
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family PCI Express Root Port 7'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x200f8086 chip=0x1c268086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
pcib4@pci0:0:30:0: class=0x060401 card=0x200f8086 chip=0x244e8086 rev=0xa4 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
none1@pci0:0:31:0: class=0x060100 card=0x200f8086 chip=0x1c4e8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Q67 Express Chipset Family LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x200f8086 chip=0x1c028086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family SATA AHCI Controller'
class = mass storage
subclass = SATA
none2@pci0:0:31:3: class=0x0c0500 card=0x200f8086 chip=0x1c228086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family SMBus Controller'
class = serial bus
subclass = SMBus
xhci0@pci0:3:0:0: class=0x0c0330 card=0x20098086 chip=0x01941033 rev=0x03 hdr=0x00
vendor = 'NEC Corporation'
device = 'uPD720200 USB 3.0 Host Controller'
class = serial bus
subclass = USB
root@i5:~/xen # de\b^[[Kmesg|more
^[[?1h^[=
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r282110: Mon Apr 27 20:49:15 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.02-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA,CMOV,P \bAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT \b,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant, performance statistics
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2152091648 (2052 MB)
avail memory = 2031779840 (1937 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
^[[7m--More--(byte 1225)^[[27m^[[K
^[[KFreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd1 at kbdmux0
netmap: loaded module
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dec6c0, 0) error 19
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
xc0: <Xen Console> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
pvcpu0: <Xen PV CPU> on xenpv0
pvcpu1: <Xen PV CPU> on xenpv0
pvcpu2: <Xen PV CPU> on xenpv0
pvcpu3: <Xen PV CPU> on xenpv0
^[[7m--More--(byte 2072)^[[27m^[[K
^[[Kxenstore0: <XenStore> on xenpv0
xsd_dev0: <Xenstored user-space device> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <INTEL DQ67EP> on motherboard
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <Xen ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <Xen ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0 \bxd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
^[[7m--More--(byte 3144)^[[27m^[[K
^[[Katapci0: <Intel ATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0 \bxf100-0xf103,0xf0f0-0xf0ff irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe529000-0xfe529fff \birq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf080-0xf09f mem 0xfe500 \b000-0xfe51ffff,0xfe528000-0xfe528fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:22:4d:51:4c:0c
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe527000-0xfe5273ff irq 16 at d \bevice 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe520000-0xfe523fff irq 22 at d \bevice 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <Xen ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci3: <Xen ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at de \bvice 0.0 on pci3
^[[7m--More--(byte 4264)^[[27m^[[K
^[[Kxhci0: 32 bytes context size, 32-bit DMA
usbus1 on xhci0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe526000-0xfe5263ff irq 23 at d \bevice 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <Xen ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
device_attach: isab0 attach returned 6
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c \b3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe525000-0xfe5257ff irq 19 at \bdevice 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
^[[7m--More--(byte 5334)^[[27m^[[K
^[[Kkbd0 at atkbd0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa0
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <0x1033> at usbus1
^[[7m--More--(byte 6490)^[[27m^[[K
^[[Kuhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen1.2: <vendor 0x05e3> at usbus1
uhub3: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 1> on usbus \b1
uhub3: 4 ports with 4 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus \b0
ugen2.2: <vendor 0x8087> at usbus2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus \b2
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x05e3> at usbus1
uhub6: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 2> on usbus \b1
uhub5: 8 ports with 8 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <BTC> at usbus1
^[[7m--More--(byte 7479)^[[27m^[[K
^[[Kukbd0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
kbd2 at ukbd0
ugen1.5: <Logitech> at usbus1
ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080)
ahcich3: Poll timeout on slot 2 port 0
ahcich3: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 80 serr 00000000 cm \bd 0000c217
(aprobe2:ahcich3:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:0:0): CAM status: Command timeout
(aprobe2:ahcich3:0:0:0): Error 5, Retries exhausted
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_register_asyn \bc
ahcich3: Poll timeout on slot 4 port 0
ahcich3: is 00000000 cs 00000010 ss 00000000 rs 00000010 tfd 80 serr 00000000 cm \bd 0000c417
(aprobe2:ahcich3:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:0:0): CAM status: Command timeout
(aprobe2:ahcich3:0:0:0): Error 5, Retries exhausted
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
ada0: Serial Number 5198PGXPT
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
^[[7m--More--(byte 8580)^[[27m^[[K
^[[Kada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
random: unblocking device.
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
warning: total configured swap (4194304 pages) exceeds maximum recommended amoun \bt (4016272 pages).
warning: increase kern.maxswzone or reduce amount of swap.
em0: link state changed to UP
uhid0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 4> on usb \bus1
ums0: 3 buttons and [XYZ] coordinates ID=0
xenballoon0: <Xen Balloon Device> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
^[[7m--More--(byte 9600)^[[27m^[[K
^[[Kxenbusb_back0: <Xen Backend Devices> on xenstore0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 done
All buffers synced.
lock order reversal:
1st 0xfffff800048c5b78 zfs (zfs) @ /usr/src/sys/cddl/contrib/opensolaris/uts/co \bmmon/fs/zfs/zfs_vfsops.c:1831
2nd 0xffffffff8188ba60 allproc (allproc) @ /usr/src/sys/kern/kern_descrip.c:288 \b1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0097463730
witness_checkorder() at witness_checkorder+0xe26/frame 0xfffffe00974637c0
_sx_slock() at _sx_slock+0x76/frame 0xfffffe0097463800
mountcheckdirs() at mountcheckdirs+0x44/frame 0xfffffe0097463850
dounmount() at dounmount+0x368/frame 0xfffffe00974638d0
vfs_unmountall() at vfs_unmountall+0x61/frame 0xfffffe0097463900
kern_reboot() at kern_reboot+0x4f6/frame 0xfffffe0097463980
sys_reboot() at sys_reboot+0x58/frame 0xfffffe00974639a0
amd64_syscall() at amd64_syscall+0x27f/frame 0xfffffe0097463ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0097463ab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x8008692ac, rsp = 0x7fffffff \b^[[7m--More--(byte 10872)^[[27m^[[K
^[[Ke9a8, rbp = 0x7fffffffeb10 ---
lock order reversal:
1st 0xfffff8000639eb78 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1229
2nd 0xfffff800048c57c8 zfs_gfs (zfs_gfs) @ /usr/src/sys/cddl/contrib/opensolari \bs/uts/common/fs/gfs.c:494
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00974632f0
witness_checkorder() at witness_checkorder+0xe26/frame 0xfffffe0097463380
__lockmgr_args() at __lockmgr_args+0xa5c/frame 0xfffffe00974634b0
vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe00974634d0
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xfc/frame 0xfffffe0097463500
_vn_lock() at _vn_lock+0x9a/frame 0xfffffe0097463570
gfs_file_create() at gfs_file_create+0x73/frame 0xfffffe00974635b0
gfs_dir_create() at gfs_dir_create+0x1d/frame 0xfffffe00974635f0
zfsctl_mknode_snapdir() at zfsctl_mknode_snapdir+0x47/frame 0xfffffe0097463650
gfs_dir_lookup() at gfs_dir_lookup+0x191/frame 0xfffffe00974636f0
gfs_vop_lookup() at gfs_vop_lookup+0x1d/frame 0xfffffe0097463710
zfsctl_root_lookup() at zfsctl_root_lookup+0xf5/frame 0xfffffe00974637a0
zfsctl_umount_snapshots() at zfsctl_umount_snapshots+0x80/frame 0xfffffe00974638 \b10
zfs_umount() at zfs_umount+0x7b/frame 0xfffffe0097463850
dounmount() at dounmount+0x40d/frame 0xfffffe00974638d0
vfs_unmountall() at vfs_unmountall+0x61/frame 0xfffffe0097463900
^[[7m--More--(byte 12193)^[[27m^[[K
^[[Kkern_reboot() at kern_reboot+0x4f6/frame 0xfffffe0097463980
sys_reboot() at sys_reboot+0x58/frame 0xfffffe00974639a0
amd64_syscall() at amd64_syscall+0x27f/frame 0xfffffe0097463ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0097463ab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x8008692ac, rsp = 0x7fffffff \be9a8, rbp = 0x7fffffffeb10 ---
lock order reversal:
1st 0xfffff800060e87c8 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1229
2nd 0xfffff80004bf3240 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2176
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0097463510
witness_checkorder() at witness_checkorder+0xe26/frame 0xfffffe00974635a0
__lockmgr_args() at __lockmgr_args+0xa5c/frame 0xfffffe00974636d0
vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe00974636f0
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xfc/frame 0xfffffe0097463720
_vn_lock() at _vn_lock+0x9a/frame 0xfffffe0097463790
vget() at vget+0x67/frame 0xfffffe00974637d0
devfs_allocv() at devfs_allocv+0xfd/frame 0xfffffe0097463820
devfs_root() at devfs_root+0x43/frame 0xfffffe0097463850
dounmount() at dounmount+0x342/frame 0xfffffe00974638d0
vfs_unmountall() at vfs_unmountall+0x61/frame 0xfffffe0097463900
kern_reboot() at kern_reboot+0x4f6/frame 0xfffffe0097463980
sys_reboot() at sys_reboot+0x58/frame 0xfffffe00974639a0
^[[7m--More--(byte 13531)^[[27m^[[K
^[[Kamd64_syscall() at amd64_syscall+0x27f/frame 0xfffffe0097463ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe0097463ab0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x8008692ac, rsp = 0x7fffffff \be9a8, rbp = 0x7fffffffeb10 ---
Uptime: 39m21s
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
APIC: Using the Xen PV enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 6 (AP)
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r282110: Mon Apr 27 20:49:15 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
Preloaded elf multiboot kernel "/boot/xen" at 0xffffffff81c6e000.
^[[7m--More--(byte 14597)^[[27m^[[K
^[[KPreloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81c6e198.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81c6e270.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81c6ea58.
Calibrating TSC clock ... TSC clock: 2500016796 Hz
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.02-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA,CMOV,P \bAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT \b,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant, performance statistics
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2152091648 (2052 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002448000 - 0x000000001fffffff, 498827264 bytes (121784 pages)
^[[7m--More--(byte 15868)^[[27m^[[K
^[[K0x0000000020200000 - 0x000000003fffffff, 534773760 bytes (130560 pages)
0x0000000040200000 - 0x000000007cfbefff, 1021046784 bytes (249279 pages)
avail memory = 2031779840 (1937 MB)
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x001000-0x001fff at 0xfffffe00929f8000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
Xen interrupt system initialized
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
^[[7m--More--(byte 16699)^[[27m^[[K
^[[KACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
ACPI: XSDT 0x00000000BC859070 000064 (v01 INTEL DQ67EP 01072009 AMI 00010013 \b)
ACPI: FACP 0x00000000BC860B50 0000F4 (v04 INTEL DQ67EP 01072009 AMI 00010013 \b)
ACPI: DSDT 0x00000000BC859168 0079E1 (v02 INTEL DQ67EP 00000016 INTL 20051117 \b)
ACPI: FACS 0x00000000BCBDBF80 000040
ACPI: APIC 0x00000000BC860C48 000072 (v03 INTEL DQ67EP 01072009 AMI 00010013 \b)
ACPI: TCPA 0x00000000BC860CC0 000032 (v02 INTEL DQ67EP 00000001 MSFT 01000013 \b)
ACPI: SSDT 0x00000000BC860CF8 000102 (v01 INTEL DQ67EP 00000001 MSFT 03000001 \b)
ACPI: MCFG 0x00000000BC860E00 00003C (v01 INTEL DQ67EP 01072009 MSFT 00000097 \b)
ACPI: HPET 0x00000000BC860E40 000038 (v01 INTEL DQ67EP 01072009 AMI. 00000004 \b)
ACPI: ASF! 0x00000000BC860E78 0000A0 (v32 INTEL DQ67EP 00000001 TFSM 000F4240 \b)
ACPI: XMAR 0x00000000BC860F18 0000E8 (v01 INTEL DQ67EP 00000001 INTL 00000001 \b)
MADT: Interrupt override: source 0, irq 2
^[[7m--More--(byte 17648)^[[27m^[[K
^[[Kxen: register IRQ#2
MADT: Interrupt override: source 9, irq 9
xen: register IRQ#9
xen: register IRQ#1
xen: register IRQ#3
xen: register IRQ#4
xen: register IRQ#5
xen: register IRQ#6
xen: register IRQ#7
xen: register IRQ#8
xen: register IRQ#10
xen: register IRQ#11
xen: register IRQ#12
xen: register IRQ#13
xen: register IRQ#14
xen: register IRQ#15
cpu0 BSP XEN PV LAPIC
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 fe \beder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
^[[7m--More--(byte 18336)^[[27m^[[K
^[[Kkbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
netmap: loaded module
null: <full device, null device, zero device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dec6c0, 0) error 19
io: <I/O>
VMBUS: load
hptnr: R750/DC7280 controller driver v1.1.1
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
Grant table initialized
xc0: <Xen Console> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xen_et0: registered as a time-of-day clock (resolution 10000000us, adjustment 5. \b^[[7m--More--(byte 19207)^[[27m^[[K
^[[K000000000s)
pvcpu0: <Xen PV CPU> on xenpv0
pvcpu1: <Xen PV CPU> on xenpv0
pvcpu2: <Xen PV CPU> on xenpv0
pvcpu3: <Xen PV CPU> on xenpv0
xenstore0: <XenStore> on xenpv0
xsd_dev0: <Xenstored user-space device> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <INTEL DQ67EP> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: not installed as time-of-day clock: clock xen_et has higher resolution
Event timer "RTC" frequency 32768 Hz quality 0
pci_link0: Index IRQ Rtd Ref IRQs
^[[7m--More--(byte 20194)^[[27m^[[K
^[[K Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
^[[7m--More--(byte 21577)^[[27m^[[K
^[[Kpci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xff
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0xcf7
pcib0: decoding 4 range 0x3b0-0x3df
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xbfa00000-0xffffffff
pci0: <Xen ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x0100, revid=0x09
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
^[[7m--More--(byte 22647)^[[27m^[[K
^[[K lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0101, revid=0x09
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
xen: register IRQ#16
secbus=1, subbus=1
found-> vendor=0x8086, dev=0x0102, revid=0x09
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xfe000000, size 22, enabled
pcib0: allocated type 3 (0xfe000000-0xfe3fffff) for rid 10 of pci0:0:2:0
^[[7m--More--(byte 23596)^[[27m^[[K
^[[K map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, e \bnabled
pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled
pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1c3a, revid=0x04
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0018, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe52a000, size 4, enabled
pcib0: allocated type 3 (0xfe52a000-0xfe52a00f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x1c3c, revid=0x04
domain=0, bus=0, slot=22, func=2
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
^[[7m--More--(byte 24665)^[[27m^[[K
^[[K lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf130, size 3, enabled
pcib0: allocated type 4 (0xf130-0xf137) for rid 10 of pci0:0:22:2
map[14]: type I/O Port, range 32, base 0xf120, size 2, enabled
pcib0: allocated type 4 (0xf120-0xf123) for rid 14 of pci0:0:22:2
map[18]: type I/O Port, range 32, base 0xf110, size 3, enabled
pcib0: allocated type 4 (0xf110-0xf117) for rid 18 of pci0:0:22:2
map[1c]: type I/O Port, range 32, base 0xf100, size 2, enabled
pcib0: allocated type 4 (0xf100-0xf103) for rid 1c of pci0:0:22:2
map[20]: type I/O Port, range 32, base 0xf0f0, size 4, enabled
pcib0: allocated type 4 (0xf0f0-0xf0ff) for rid 20 of pci0:0:22:2
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
xen: register IRQ#18
found-> vendor=0x8086, dev=0x1c3d, revid=0x04
domain=0, bus=0, slot=22, func=3
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
^[[7m--More--(byte 25820)^[[27m^[[K
^[[K powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf0e0, size 3, enabled
pcib0: allocated type 4 (0xf0e0-0xf0e7) for rid 10 of pci0:0:22:3
map[14]: type Memory, range 32, base 0xfe529000, size 12, enabled
pcib0: allocated type 3 (0xfe529000-0xfe529fff) for rid 14 of pci0:0:22:3
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
xen: register IRQ#17
found-> vendor=0x8086, dev=0x1502, revid=0x04
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfe500000, size 17, enabled
pcib0: allocated type 3 (0xfe500000-0xfe51ffff) for rid 10 of pci0:0:25:0
map[14]: type Memory, range 32, base 0xfe528000, size 12, enabled
pcib0: allocated type 3 (0xfe528000-0xfe528fff) for rid 14 of pci0:0:25:0
map[18]: type I/O Port, range 32, base 0xf080, size 5, enabled
pcib0: allocated type 4 (0xf080-0xf09f) for rid 18 of pci0:0:25:0
^[[7m--More--(byte 26998)^[[27m^[[K
^[[Kpcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
xen: register IRQ#20
found-> vendor=0x8086, dev=0x1c2d, revid=0x04
domain=0, bus=0, slot=26, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe527000, size 10, enabled
pcib0: allocated type 3 (0xfe527000-0xfe5273ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x1c20, revid=0x04
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
^[[7m--More--(byte 27973)^[[27m^[[K
^[[K map[10]: type Memory, range 64, base 0xfe520000, size 14, enabled
pcib0: allocated type 3 (0xfe520000-0xfe523fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
xen: register IRQ#22
found-> vendor=0x8086, dev=0x1c10, revid=0xb4
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
secbus=2, subbus=2
found-> vendor=0x8086, dev=0x1c1c, revid=0xb4
domain=0, bus=0, slot=28, func=6
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
^[[7m--More--(byte 28916)^[[27m^[[K
^[[K MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=3, subbus=3
found-> vendor=0x8086, dev=0x1c26, revid=0x04
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe526000, size 10, enabled
pcib0: allocated type 3 (0xfe526000-0xfe5263ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
xen: register IRQ#23
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x244e, revid=0xa4
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=4, subbus=4
^[[7m--More--(byte 29864)^[[27m^[[K
^[[Kfound-> vendor=0x8086, dev=0x1c4e, revid=0x04
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1c02, revid=0x04
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xf0d0, size 3, enabled
pcib0: allocated type 4 (0xf0d0-0xf0d7) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0xf0c0, size 2, enabled
pcib0: allocated type 4 (0xf0c0-0xf0c3) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0xf0b0, size 3, enabled
pcib0: allocated type 4 (0xf0b0-0xf0b7) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0xf0a0, size 2, enabled
pcib0: allocated type 4 (0xf0a0-0xf0a3) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled
pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:31:2
^[[7m--More--(byte 31070)^[[27m^[[K
^[[K map[24]: type Memory, range 32, base 0xfe525000, size 11, enabled
pcib0: allocated type 3 (0xfe525000-0xfe5257ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
xen: register IRQ#19
found-> vendor=0x8086, dev=0x1c22, revid=0x04
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0xfe524000, size 8, enabled
pcib0: allocated type 3 (0xfe524000-0xfe5240ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled
pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pci1: <Xen ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
^[[7m--More--(byte 32136)^[[27m^[[K
^[[Kpci1: domain=0, physical bus=1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0 \bxd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
agp0: AGP_SNB_GFX_MODE: 00000000
agp0: AGP_SNB_GCC1: 0x0209
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 524288
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0 \bxf100-0xf103,0xf0f0-0xf0ff irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe529000-0xfe529fff \birq 17 at device 22.3 on pci0
uart2: fast interrupt
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf080-0xf09f mem 0xfe500 \b000-0xfe51ffff,0xfe528000-0xfe528fff irq 20 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
^[[7m--More--(byte 33227)^[[27m^[[K
^[[Kem0: bpf attached
em0: Ethernet address: 00:22:4d:51:4c:0c
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe527000-0xfe5273ff irq 16 at d \bevice 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe520000-0xfe523fff irq 22 at d \bevice 27.0 on pci0
hdac0: PCI card vendor: 0x8086, device: 0x200f
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
hdac0: using IRQ 257 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pci2: <Xen ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
^[[7m--More--(byte 34153)^[[27m^[[K
^[[Kpcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pcib0: allocated type 3 (0xfe400000-0xfe4fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xfe400000-0xfe4fffff
pci3: <Xen ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x1033, dev=0x0194, revid=0x03
domain=0, bus=3, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xfe400000, size 13, enabled
pcib3: allocated memory range (0xfe400000-0xfe401fff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at de \b^[[7m--More--(byte 35196)^[[27m^[[K
^[[Kvice 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
xhci0: using IRQ 258 for MSI
xhci0: MSI enabled
usbus1 on xhci0
xhci0: usbpf: Attached
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe526000-0xfe5263ff irq 23 at d \bevice 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
ehci1: usbpf: Attached
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: special decode subtractive
pci4: <Xen ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa: isa0 already exists; skipping it
device_attach: isab0 attach returned 6
^[[7m--More--(byte 35980)^[[27m^[[K
^[[Kahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c \b3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe525000-0xfe5257ff irq 19 at \bdevice 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
ahci0: using IRQ 259 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: not probed (disabled)
ahcich2: not probed (disabled)
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: HPCP ESP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: HPCP ESP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
ACPI: Enabled 3 GPEs in block 00 to 3F
^[[7m--More--(byte 36961)^[[27m^[[K
^[[Kacpi0: wakeup code va 0xfffffe0096c75000 pa 0x4000
ahc_isa_identify 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
device_attach: atkbd0 attach returned 6
psm0: unable to allocate IRQ
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
^[[7m--More--(byte 37960)^[[27m^[[K
^[[Kusbus0: 480Mbps High Speed USB v2.0
procfs registered
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x8086200f
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
^[[7m--More--(byte 39017)^[[27m^[[K
^[[Khdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 23 99130140 4 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 24 01a19c50 5 0 Mic Jack 1/8 Rear Pink 12
hdaa0: 25 02a19960 6 0 Mic Jack 1/8 Front Pink 9
hdaa0: 26 0181345f 5 15 Line-in Jack 1/8 Rear Blue 4
hdaa0: 27 02214120 2 0 Headphones Jack 1/8 Front Green 1
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 29 4004c601 0 1 Line-out None RCA 0x00 Res.C 6
hdaa0: 30 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 23 99130140 4 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 24 01a19c50 5 0 Mic Jack 1/8 Rear Pink 12
hdaa0: 25 02a19960 6 0 Mic Jack 1/8 Front Pink 9
^[[7m--More--(byte 40691)^[[27m^[[K
^[[Khdaa0: 26 0181345f 5 15 Line-in Jack 1/8 Rear Blue 4
hdaa0: 27 02214120 2 0 Headphones Jack 1/8 Front Green 1
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 30 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 6 associations found:
hdaa0: Association 0 (1) out:
hdaa0: Pin nid=20 seq=0
hdaa0: Association 1 (2) out:
hdaa0: Pin nid=27 seq=0
hdaa0: Association 2 (3) out:
hdaa0: Pin nid=30 seq=0
hdaa0: Association 3 (4) out:
hdaa0: Pin nid=23 seq=0
hdaa0: Association 4 (5) in:
hdaa0: Pin nid=24 seq=0
hdaa0: Pin nid=26 seq=15
hdaa0: Association 5 (6) in:
hdaa0: Pin nid=25 seq=0
hdaa0: Tracing association 0 (1)
hdaa0: Pin 20 traced to DAC 2
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
^[[7m--More--(byte 41592)^[[27m^[[K
^[[Khdaa0: Pin 27 traced to DAC 3
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (3)
hdaa0: Pin 30 traced to DAC 6
hdaa0: Association 2 (3) trace succeeded
hdaa0: Tracing association 3 (4)
hdaa0: Pin 23 traced to DAC 4
hdaa0: Association 3 (4) trace succeeded
hdaa0: Tracing association 4 (5)
hdaa0: Pin 24 traced to ADC 8
hdaa0: Pin 26 traced to ADC 8
hdaa0: Association 4 (5) trace succeeded
hdaa0: Tracing association 5 (6)
hdaa0: Pin 25 traced to ADC 9
hdaa0: Association 5 (6) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional DAC for association 1 (2)
hdaa0: Looking for additional DAC for association 2 (3)
hdaa0: Looking for additional DAC for association 3 (4)
hdaa0: Looking for additional ADC for association 4 (5)
hdaa0: Looking for additional ADC for association 5 (6)
hdaa0: Tracing input monitor
hdaa0: Tracing nid 11 to out
^[[7m--More--(byte 42510)^[[27m^[[K
^[[Khdaa0: nid 11 is input monitor
hdaa0: Tracing nid 34 to out
hdaa0: Tracing nid 35 to out
hdaa0: Tracing other input monitors
hdaa0: Tracing nid 24 to out
hdaa0: Tracing nid 25 to out
hdaa0: Tracing nid 26 to out
hdaa0: Tracing beeper
hdaa0: Pin sense: nid=20 sense=0x80000000 (connected)
hdaa0: Pin sense: nid=24 sense=0x80000000 (connected)
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm0: Playback:
pcm0: Stream cap: 0x00000001 PCM
pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: nid=20 [pin: Line-out (Green Jack)]
pcm0: + <- nid=12 [audio mixer] [src: pcm, mix]
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Record:
^[[7m--More--(byte 43377)^[[27m^[[K
^[[Kpcm0: Stream cap: 0x00000001 PCM
pcm0: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm0: ADC: 8
pcm0:
pcm0: nid=8 [audio input]
pcm0: + <- nid=35 [audio mixer] [src: speaker, line, mic, mix]
pcm0: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm0: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0: + <- nid=11 [audio mixer] [src: mix]
pcm0:
pcm0: Input Mix:
pcm0:
pcm0: nid=11 [audio mixer]
pcm0: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm0: + <- nid=26 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=29 [beep widget] [src: speaker]
pcm0:
pcm0: Master Volume (OSS: vol): -46/0dB
pcm0: +- ctl 13 (nid 12 out): -46/0dB (32 steps)
pcm0: +- ctl 14 (nid 12 in 0): mute
pcm0: +- ctl 15 (nid 12 in 1): mute
pcm0: +- ctl 25 (nid 20 in ): mute
^[[7m--More--(byte 44328)^[[27m^[[K
^[[Kpcm0:
pcm0: PCM Volume (OSS: pcm): 0/0dB
pcm0: +- ctl 14 (nid 12 in 0): mute
pcm0:
pcm0: Microphone Volume (OSS: mic): 0/30dB
pcm0: +- ctl 3 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm0: +- ctl 34 (nid 24 out): 0/30dB (4 steps)
pcm0: +- ctl 53 (nid 35 in 0): mute
pcm0:
pcm0: Line-in Volume (OSS: line): 0/30dB
pcm0: +- ctl 5 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm0: +- ctl 38 (nid 26 out): 0/30dB (4 steps)
pcm0: +- ctl 55 (nid 35 in 2): mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker): -34/12dB
pcm0: +- ctl 8 (nid 11 in 5): -34/12dB (32 steps) + mute
pcm0: +- ctl 58 (nid 35 in 5): mute
pcm0:
pcm0: Recording Level (OSS: rec): -16/30dB
pcm0: +- ctl 1 (nid 8 in 0): -16/30dB (32 steps) + mute
pcm0: +- ctl 53 (nid 35 in 0): mute
pcm0: +- ctl 55 (nid 35 in 2): mute
pcm0: +- ctl 58 (nid 35 in 5): mute
^[[7m--More--(byte 45234)^[[27m^[[K
^[[Kpcm0: +- ctl 63 (nid 35 in 10): mute
pcm0:
pcm0: Input Mix Level (OSS: mix): -34/12dB
pcm0: +- ctl 3 (nid 11 in 0): -34/12dB (32 steps) + mute
pcm0: +- ctl 5 (nid 11 in 2): -34/12dB (32 steps) + mute
pcm0: +- ctl 8 (nid 11 in 5): -34/12dB (32 steps) + mute
pcm0: +- ctl 15 (nid 12 in 1): mute
pcm0: +- ctl 63 (nid 35 in 10): mute
pcm0:
pcm0: Input Monitoring Level (OSS: igain): 0/0dB
pcm0: +- ctl 15 (nid 12 in 1): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "mix":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Soft PCM mixer ENABLED
pcm0: Playback channel set is: Front Left, Front Right,
^[[7m--More--(byte 45973)^[[27m^[[K
^[[Kpcm0: Playback channel matrix is: 2.0 (connected)
pcm0: Automatically set rec source to: mic
pcm0: Recording channel set is: Front Left, Front Right,
pcm0: Recording channel matrix is: 2.0 (connected)
pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0
pcm1: Playback:
pcm1: Stream cap: 0x00000001 PCM
pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm1: DAC: 3
pcm1:
pcm1: nid=27 [pin: Headphones (Green Jack)]
pcm1: + <- nid=13 [audio mixer] [src: pcm, mix]
pcm1: + <- nid=3 [audio output] [src: pcm]
pcm1: + <- nid=11 [audio mixer] [src: mix]
pcm1:
pcm1: Record:
pcm1: Stream cap: 0x00000001 PCM
pcm1: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm1: ADC: 9
pcm1:
pcm1: nid=9 [audio input]
pcm1: + <- nid=34 [audio mixer] [src: speaker, monitor]
pcm1: + <- nid=25 [pin: Mic (Pink Jack)] [src: monitor]
^[[7m--More--(byte 46923)^[[27m^[[K
^[[Kpcm1: + <- nid=29 [beep widget] [src: speaker]
pcm1:
pcm1: Master Volume (OSS: vol): -46/0dB
pcm1: +- ctl 16 (nid 13 out): -46/0dB (32 steps)
pcm1: +- ctl 17 (nid 13 in 0): mute
pcm1: +- ctl 18 (nid 13 in 1): mute
pcm1: +- ctl 39 (nid 27 in ): mute
pcm1:
pcm1: PCM Volume (OSS: pcm): 0/0dB
pcm1: +- ctl 17 (nid 13 in 0): mute
pcm1:
pcm1: Microphone2 Volume (OSS: monitor): 0/30dB
pcm1: +- ctl 36 (nid 25 out): 0/30dB (4 steps)
pcm1: +- ctl 42 (nid 34 in 1): mute
pcm1:
pcm1: Speaker/Beep Volume (OSS: speaker)
pcm1: +- ctl 46 (nid 34 in 5): mute
pcm1:
pcm1: Recording Level (OSS: rec): -16/30dB
pcm1: +- ctl 2 (nid 9 in 0): -16/30dB (32 steps) + mute
pcm1: +- ctl 36 (nid 25 out): 0/30dB (4 steps)
pcm1: +- ctl 42 (nid 34 in 1): mute
pcm1: +- ctl 46 (nid 34 in 5): mute
^[[7m--More--(byte 47789)^[[27m^[[K
^[[Kpcm1:
pcm1: Input Mix Level (OSS: mix)
pcm1: +- ctl 18 (nid 13 in 1): mute
pcm1:
pcm1: Input Monitoring Level (OSS: igain): 0/0dB
pcm1: +- ctl 18 (nid 13 in 1): mute
pcm1:
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "rec":
pcm1: Mixer "igain":
pcm1: Mixer "monitor":
pcm1: Soft PCM mixer ENABLED
pcm1: Playback channel set is: Front Left, Front Right,
pcm1: Playback channel matrix is: 2.0 (unknown)
pcm1: Automatically set rec source to: monitor
pcm1: Recording channel set is: Front Left, Front Right,
pcm1: Recording channel matrix is: 2.0 (unknown)
pcm2: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa0
pcm2: Playback:
pcm2: Stream cap: 0x00000005 AC3 PCM
pcm2: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz
pcm2: DAC: 6
^[[7m--More--(byte 48577)^[[27m^[[K
^[[Kpcm2:
pcm2: nid=30 [pin: SPDIF-out (Fixed)]
pcm2: + <- nid=6 [audio output] [src: pcm]
pcm2:
pcm2: Mixer "vol" -> "none": child=0x00000010
pcm2: Mixer "pcm": parent="vol"
pcm2: Soft PCM mixer ENABLED
pcm2: Playback channel set is: Front Left, Front Right,
pcm2: Playback channel matrix is: 2.0 (unknown)
pcm3: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa0
pcm3: Playback:
pcm3: Stream cap: 0x00000001 PCM
pcm3: PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
pcm3: DAC: 4
pcm3:
pcm3: nid=23 [pin: Speaker (Fixed)]
pcm3: + <- nid=14 [audio mixer] [src: pcm, mix]
pcm3: + <- nid=4 [audio output] [src: pcm]
pcm3: + <- nid=11 [audio mixer] [src: mix]
pcm3:
pcm3: Master Volume (OSS: vol): -46/0dB
pcm3: +- ctl 19 (nid 14 out): -46/0dB (32 steps)
pcm3: +- ctl 20 (nid 14 in 0): mute
^[[7m--More--(byte 49464)^[[27m^[[K
^[[Kpcm3: +- ctl 21 (nid 14 in 1): mute
pcm3: +- ctl 31 (nid 23 in ): mute
pcm3:
pcm3: PCM Volume (OSS: pcm): 0/0dB
pcm3: +- ctl 20 (nid 14 in 0): mute
pcm3:
pcm3: Input Mix Level (OSS: mix)
pcm3: +- ctl 21 (nid 14 in 1): mute
pcm3:
pcm3: Input Monitoring Level (OSS: igain): 0/0dB
pcm3: +- ctl 21 (nid 14 in 1): mute
pcm3:
pcm3: Mixer "vol":
pcm3: Mixer "pcm":
pcm3: Mixer "igain":
pcm3: Soft PCM mixer ENABLED
pcm3: Playback channel set is: Front Left, Front Right,
pcm3: Playback channel matrix is: 2.0 (unknown)
hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1
hdaa1: Subsystem ID: 0x8086200f
hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa1: Original pins configuration:
^[[7m--More--(byte 50261)^[[27m^[[K
^[[Khdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 5 58560010 1 0 Digital-out None Digital 0x18 Unknown 0
hdaa1: 6 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa1: 7 58560030 3 0 Digital-out None Digital 0x18 Unknown 0
hdaa1: Patched pins configuration:
hdaa1: nid 0x as seq device conn jack loc color misc
hdaa1: 5 58560010 1 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa1: 6 18560020 2 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa1: 7 58560030 3 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa1: 1 associations found:
hdaa1: Association 0 (2) out:
hdaa1: Pin nid=6 seq=0
hdaa1: Tracing association 0 (2)
hdaa1: Pin 6 traced to DAC 3
hdaa1: Association 0 (2) trace succeeded
hdaa1: Looking for additional DAC for association 0 (2)
hdaa1: Tracing input monitor
hdaa1: Tracing other input monitors
hdaa1: Tracing beeper
hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm4: Playback:
pcm4: Stream cap: 0x00000005 AC3 PCM
^[[7m--More--(byte 51419)^[[27m^[[K
^[[Kpcm4: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
pcm4: DAC: 3
pcm4:
pcm4: nid=6 [pin: Digital-out (Jack)]
pcm4: + <- nid=3 [audio output] [src: pcm]
pcm4:
pcm4: Master Volume (OSS: vol): 0/0dB
pcm4: +- ctl 2 (nid 6 in ): mute
pcm4:
pcm4: PCM Volume (OSS: pcm): 0/0dB
pcm4: +- ctl 2 (nid 6 in ): mute
pcm4:
pcm4: Mixer "vol":
pcm4: Mixer "pcm":
pcm4: Soft PCM mixer ENABLED
pcm4: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <0x1033> at usbus1
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
^[[7m--More--(byte 52256)^[[27m^[[K
^[[Kugen0.1: <Intel> at usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub1: 4 ports with 4 removable, self powered
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
^[[7m--More--(byte 53288)^[[27m^[[K
^[[Kata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ugen1.2: <vendor 0x05e3> at usbus1
uhub3: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 1> on usbus \b1
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub3: 4 ports with 4 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ahcich0: AHCI reset...
ahcich0: SATA connect time=1800us status=00000113
ahcich0: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=900us status=00000113
ahcich3: AHCI reset: device found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
^[[7m--More--(byte 54232)^[[27m^[[K
^[[Kahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus \b0
ugen2.2: <vendor 0x8087> at usbus2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus \b2
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
ahcich0: AHCI reset: device ready after 100ms
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x05e3> at usbus1
uhub6: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 2> on usbus \b1
uhub5: 8 ports with 8 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <BTC> at usbus1
ukbd0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen1.5: <Logitech> at usbus1
ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080)
^[[7m--More--(byte 55186)^[[27m^[[K
^[[Kahcich3: Poll timeout on slot 2 port 0
ahcich3: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 80 serr 00000000 cm \bd 0000c217
(aprobe2:ahcich3:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:0:0): CAM status: Command timeout
(aprobe2:ahcich3:0:0:0): Error 5, Retries exhausted
GEOM: new disk ada0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
ada0: Serial Number 5198PGXPT
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
pass0 at ahcich0 bus 0 scbus2 target 0 lun 0
pass0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
pass0: Serial Number 5198PGXPT
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahciem0 bus 0 scbus6 target 0 lun 0
pass1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
^[[7m--More--(byte 56276)^[[27m^[[K
^[[Kses0: SEMB SES Device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
random: unblocking device.
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
cpu1 AP XEN PV LAPIC
SMP: AP CPU #2 Launched!
cpu2 AP XEN PV LAPIC
SMP: AP CPU #3 Launched!
cpu3 AP XEN PV LAPIC
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1250008398 Hz quality -100
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
start_init: trying /sbin/init
warning: total configured swap (4194304 pages) exceeds maximum recommended amoun \bt (4016272 pages).
warning: increase kern.maxswzone or reduce amount of swap.
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
^[[7m--More--(byte 57171)^[[27m^[[K
^[[Kuhid0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 4> on usb \bus1
ums0: 3 buttons and [XYZ] coordinates ID=0
xenballoon0: <Xen Balloon Device> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_back0: <Xen Backend Devices> on xenstore0
^[[K^[[?1l^[>root@i5:~/xen # \b\b\a\axl -\b^[[Kcret\b^[[K\b^[[K\b^[[K\b^[[K0-v\b^[[K\b^[[K\b^[[K-vvvv create -c fbsd\aserial.s\b^[[K
^[[Kroot@i5:~/xen # cat fbsd.\b^[[Kse\arial.cfg f\b^[[K
root@i5:~/xen # ls
fbsdserial.cfg fbsdserial.img
root@i5:~/xen # ls\b\bcat fbsdserial.cfg\b^[[K\b^[[K\b^[[K\b^[[K\b^[[K\al.cfg
root@i5:~/xen # cat /boot/loaderc\b^[[K/conf\b^[[K\b^[[K\b^[[K\b^[[K\b^[[K.conf\b^[[Kf
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
zfs_load="YES"
autoboot_delay="3"
boot_verbose="YES"
comconsole_speed="115200"
console="vidconsole"
xen_kernel="/boot/xen"
xen_cmdline="dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 console=com1 com1=115200,8n1,pci guest_loglvl=all loglvl=all iommu=debug"
# sync_console
# iommu=debug,no-qinval
root@i5:~/xen # ls ..
.ICEauthority .history .xinitrc
.Xauthority .k5login Desktop
.cache .local boot
.config .login etc
.cshrc .profile xen
.dbus .rnd xen-tools-4.5.0_4.txz
.gvfs .serverauth.793
root@i5:~/xen # ls
fbsdserial.cfg fbsdserial.img
root@i5:~/xen # vi fbsdse\arial.cfg
^[[1;24r^[[m^[[4l^[[?1h^[=^[[H^[[2J^[[1B~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[1B\b~^[[H^[[23Bfbsdserial.cfg: unmodified: line 1^[[H^[[23B^[[J^[[Hbuilder="hfv\b\bvm"
^[[1B \bmemory = 2048
^[[1B \bvcpus =2\b 2
^[[1B \bname = "FreeBSD"
^[[1B \bdisk = [ '/root/xen/fbsdserial.img,raw,hrd\bda\b\b\bda,w' ]
^[[1B \bboot = "c"
^[[1B \busbdevice = 'tablet"\b'
^[[1B \bserial -\b= 'pty \b'
^[[16BCopying file for recovery...
^[[J^[[8;15H
^[[16B:wq
fbsdserial.cfg: 8 lines, 150 characters
^[[?1l^[>
^[[23;40H.
^[[1B^[[24;1H
^[[?1l^[>root@i5:~/xen # cat /boot/loader.conf
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
zfs_load="YES"
autoboot_delay="3"
boot_verbose="YES"
comconsole_speed="115200"
console="vidconsole"
xen_kernel="/boot/xen"
xen_cmdline="dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 console=com1 com1=115200,8n1,pci guest_loglvl=all loglvl=all iommu=debug"
# sync_console
# iommu=debug,no-qinval
root@i5:~/xen # x\al create \b\b^[[K\b^[[K\b^[[K\b^[[K\b^[[K\b^[[K\b -vvvv create -c se\b^[[K\b^[[Kfbsdse\arial.cfg
Parsing config from fbsdserial.cfg
libxl: debug: libxl_create.c:1501:do_domain_create: ao 0x802c46080: create: how=0x0 callback=0x0 poller=0x802c1f0a0
libxl: debug: libxl_device.c:269:libxl__device_disk_set_backend: Disk vdev=hda spec.backend=unknown
libxl: debug: libxl_device.c:298:libxl__device_disk_set_backend: Disk vdev=hda, using backend phy
libxl: debug: libxl_create.c:907:initiate_domain_create: running bootloader
libxl: debug: libxl_bootloader.c:323:libxl__bootloader_run: not a PV domain, skipping bootloader
libxl: debug: libxl_event.c:629:libxl__ev_xswatch_deregister: watch w=0x802c37770: deregister unregistered
xc: detail: elf_parse_binary: phdr: paddr=0x100000 memsz=0x599ec
xc: detail: elf_parse_binary: memory: 0x100000 -> 0x1599ec
xc: detail: VIRTUAL MEMORY ARRANGEMENT:
xc: detail: Loader: 0000000000100000->00000000001599ec
xc: detail: Modules: 0000000000000000->0000000000000000
xc: detail: TOTAL: 0000000000000000->000000007f800000
xc: detail: ENTRY: 0000000000100000
xc: detail: PHYSICAL MEMORY ALLOCATION:
xc: detail: 4KB PAGES: 0x0000000000000200
xc: detail: 2MB PAGES: 0x00000000000003fb
xc: detail: 1GB PAGES: 0x0000000000000000
xc: detail: elf_load_binary: phdr 0 at 0x80067a000 -> 0x8006ca991
libxl: debug: libxl_device.c:269:libxl__device_disk_set_backend: Disk vdev=hda spec.backend=phy
libxl: debug: libxl_event.c:577:libxl__ev_xswatch_register: watch w=0x802c3b3c8 wpath=/local/domain/0/backend/vbd/1/768/state token=3/0: register slotnum=3
libxl: debug: libxl_create.c:1517:do_domain_create: ao 0x802c46080: inprogress: poller=0x802c1f0a0, flags=i
libxl: debug: libxl_event.c:514:watchfd_callback: watch w=0x802c3b3c8 wpath=/local/domain/0/backend/vbd/1/768/state token=3/0: event epath=/local/domain/0/backend/vbd/1/768/state
libxl: debug: libxl_event.c:834:devstate_watch_callback: backend /local/domain/0/backend/vbd/1/768/state wanted state 2 still waiting state 1
libxl: debug: libxl_event.c:514:watchfd_callback: watch w=0x802c3b3c8 wpath=/local/domain/0/backend/vbd/1/768/state token=3/0: event epath=/local/domain/0/backend/vbd/1/768/state
libxl: debug: libxl_event.c:830:devstate_watch_callback: backend /local/domain/0/backend/vbd/1/768/state wanted state 2 ok
libxl: debug: libxl_event.c:615:libxl__ev_xswatch_deregister: watch w=0x802c3b3c8 wpath=/local/domain/0/backend/vbd/1/768/state token=3/0: deregister slotnum=3
libxl: debug: libxl_event.c:629:libxl__ev_xswatch_deregister: watch w=0x802c3b3c8: deregister unregistered
libxl: debug: libxl_event.c:629:libxl__ev_xswatch_deregister: watch w=0x802c3b450: deregister unregistered
libxl: debug: libxl_dm.c:1413:libxl__spawn_local_dm: Spawning device-model /usr/local/lib/xen/bin/qemu-system-i386 with arguments:
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: /usr/local/lib/xen/bin/qemu-system-i386
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -xen-domid
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: 1
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -chardev
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: socket,id=libxl-cmd,path=/var/run/xen/qmp-libxl-1,server,nowait
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -mon
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: chardev=libxl-cmd,mode=control
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -nodefaults
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -name
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: FreeBSD
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -vnc
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: 127.0.0.1:0,to=99
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -serial
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: pty
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -device
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: cirrus-vga,vgamem_mb=8
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -boot
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: order=c
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -usb
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -usbdevice
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: tablet
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -smp
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: 2,maxcpus=2
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -net
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: none
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -machine
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: xenfv
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -m
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: 2040
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: -drive
libxl: debug: libxl_dm.c:1415:libxl__spawn_local_dm: file=/root/xen/fbsdserial.img,if=ide,index=0,media=disk,format=raw,cache=writeback
libxl: debug: libxl_event.c:577:libxl__ev_xswatch_register: watch w=0x802c379d0 wpath=/local/domain/0/device-model/1/state token=3/1: register slotnum=3
libxl: debug: libxl_event.c:514:watchfd_callback: watch w=0x802c379d0 wpath=/local/domain/0/device-model/1/state token=3/1: event epath=/local/domain/0/device-model/1/state
libxl: debug: libxl_event.c:514:watchfd_callback: watch w=0x802c379d0 wpath=/local/domain/0/device-model/1/state token=3/1: event epath=/local/domain/0/device-model/1/state
libxl: debug: libxl_event.c:615:libxl__ev_xswatch_deregister: watch w=0x802c379d0 wpath=/local/domain/0/device-model/1/state token=3/1: deregister slotnum=3
libxl: debug: libxl_event.c:629:libxl__ev_xswatch_deregister: watch w=0x802c379d0: deregister unregistered
libxl: debug: libxl_qmp.c:691:libxl__qmp_initialize: connected to /var/run/xen/qmp-libxl-1
libxl: debug: libxl_qmp.c:296:qmp_handle_response: message type: qmp
libxl: debug: libxl_qmp.c:541:qmp_send_prepare: next qmp command: '{
"execute": "qmp_capabilities",
"id": 1
}
'
libxl: debug: libxl_qmp.c:296:qmp_handle_response: message type: return
libxl: debug: libxl_qmp.c:541:qmp_send_prepare: next qmp command: '{
"execute": "query-chardev",
"id": 2
}
'
libxl: debug: libxl_qmp.c:296:qmp_handle_response: message type: return
libxl: debug: libxl_qmp.c:541:qmp_send_prepare: next qmp command: '{
"execute": "query-vnc",
"id": 3
}
'
libxl: debug: libxl_qmp.c:296:qmp_handle_response: message type: return
libxl: debug: libxl_event.c:1945:libxl__ao_progress_report: ao 0x802c46080: progress report: callback queued aop=0x803011160
libxl: debug: libxl_event.c:1765:libxl__ao_complete: ao 0x802c46080: complete, rc=0
libxl: debug: libxl_event.c:1334:egc_run_callbacks: ao 0x802c46080: progress report: callback aop=0x803011160
libxl: debug: libxl_event.c:1737:libxl__ao__destroy: ao 0x802c46080: destroy
(d1) HVM Loader
(d1) Detected Xen v4.5.0
(d1) Xenbus rings @0xfeffc000, event channel 1
(d1) System requested SeaBIOS
(d1) CPU speed is 2500 MHz
(d1) Relocating guest memory for lowmem MMIO space disabled
(XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(d1) PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(d1) PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(d1) PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(d1) PCI-ISA link 3 routed to IRQ5
(d1) pci dev 01:2 INTD->IRQ5
(d1) pci dev 01:3 INTA->IRQ10
(d1) pci dev 02:0 INTA->IRQ11
(d1) No RAM in high memory; setting high_mem resource base to 100000000
(d1) pci dev 03:0 bar 10 size 002000000: 0f0000008
(d1) pci dev 02:0 bar 14 size 001000000: 0f2000008
(d1) pci dev 03:0 bar 30 size 000010000: 0f3000000
(d1) pci dev 03:0 bar 14 size 000001000: 0f3010000
(d1) pci dev 02:0 bar 10 size 000000100: 00000c001
(d1) pci dev 01:2 bar 20 size 000000020: 00000c101
(d1) pci dev 01:1 bar 20 size 000000010: 00000c121
(d1) Multiprocessor initialisation:
(d1) - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) Testing HVM environment:
(d1) - REP INSB across page boundaries ... passed
(d1) - GS base MSRs and SWAPGS ... passed
(d1) Passed 2 of 2 tests
(d1) Writing SMBIOS tables ...
(d1) Loading SeaBIOS ...
(d1) Creating MP tables ...
(d1) Loading ACPI ...
(d1) vm86 TSS at fc00a200
(d1) BIOS map:
(d1) 10000-100d3: Scratch space
(d1) c0000-fffff: Main BIOS
(d1) E820 table:
(d1) [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d1) HOLE: 00000000:000a0000 - 00000000:000c0000
(d1) [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d1) [02]: 00000000:00100000 - 00000000:7f800000: RAM
(d1) HOLE: 00000000:7f800000 - 00000000:fc000000
(d1) [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d1) Invoking SeaBIOS ...
(d1) SeaBIOS (version 1.8.1)
(d1)
(d1) Found Xen hypervisor signature at 40000000
(d1) Running on QEMU (i440fx)
(d1) xen: copy e820...
(d1) Relocating init from 0x000de920 to 0x7f7aec00 (size 70464)
(d1) CPU Mhz=2501
(d1) Found 7 PCI devices (max PCI bus is 00)
(d1) Allocated Xen hypercall page at 7f7ff000
(d1) Detected Xen v4.5.0
(d1) xen: copy BIOS tables...
(d1) Copying SMBIOS entry point from 0x00010010 to 0x000f6600
(d1) Copying MPTABLE from 0xfc001160/fc001170 to 0x000f6500
(d1) Copying PIR from 0x00010030 to 0x000f6480
(d1) Copying ACPI RSDP from 0x000100b0 to 0x000f6450
(d1) Using pmtimer, ioport 0xb008
(d1) Scan for VGA option rom
(d1) Running option rom at c000:0003
(XEN) stdvga.c:147:d1v0 entering stdvga and caching modes
(d1) pmm call arg1=0
(d1) Turning on vga text mode console
(d1) SeaBIOS (version 1.8.1)
(d1) Machine UUID f4ef25db-e4f4-e411-81a1-00224d514c0c
(d1) UHCI init on dev 00:01.2 (io=c100)
(d1) Found 0 lpt ports
(d1) Found 1 serial ports
(d1) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d1) ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d1) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (20480 MiBytes)
(d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d1) PS2 keyboard initialized
(d1) All threads complete.
(d1) Scan for option roms
(d1)
(d1) Press F12 for boot menu.
(d1)
(d1) Searching bootorder for: HALT
(d1) drive 0x000f6400: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=41943040
(d1) Space available for UMB: c9800-ef000, f5e20-f6400
(d1) Returned 258048 bytes of ZoneHigh
(d1) e820 map has 6 items:
(d1) 0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d1) 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d1) 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d1) 3: 0000000000100000 - 000000007f7ff000 = 1 RAM
(d1) 4: 000000007f7ff000 - 000000007f800000 = 2 RESERVED
(d1) 5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d1) enter handle_19:
(d1) NULL
(d1) Booting from Hard Disk...
(d1) Booting from 0000:7c00
-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b^[[H^[[J^[[7;46H ``` `^[[8;46Hs` `.....---.......--.``` -/^[[9;46H+o .--` /y:` +.^[[10;46H yo`:. :o `+-^[[11;46H y/ -/` -o/^[[12;46H .- ::/sy+:.^[[13;46H / `-- /^[[14;46H`: :`^[[15;46H`: :`^[[16;46H / /^[[17;46H .- -.^[[18;46H -- -.^[[19;46H `:` `:`^[[20;46H .-- `--.^[[21;46H .---.....----.^[[25;0H^[[1;2H ______ ____ _____ _____ ^[[2;2H| ____| | _ \ / ____| __ \ ^[[3;2H| |___ _ __ ___ ___ | |_) | (___ | | | |^[[4;2H| ___| '__/ _ \/ _ \| _ < \___ \| | | |^[[5;2H| | | | | __/ __/| |_) |____) | |__| |^[[6;2H| | | | | | || | | |^[[7;2H|_| |_| \___|\___||____/|_____/|_____/ ^[[25;0H^[[10;2H|^[[11;2H|^[[12;2H|^[[13;2H|^[[14;2H|^[[15;2H|^[[16;2H|^[[17;2H|^[[18;2H|^[[19;2H|^[[20;2H|^[[21;2H|^[[10;44H|^[[11;44H|^[[12;44H|^[[13;44H|^[[14;44H|^[[15;44H|^[[16;44H|^[[17;44H|^[[18;44H|^[[19;44H|^[[20;44H|^[[21;44H|^[[9;3H-----------------------------------------^[[22;3H-----------------------------------------^[[9;2H+^[[22;2H+^[[9;44H+^[[22;44H+^[[25;0H-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b^[[9;15HWelcome to FreeBSD^[[11;5H1 ^[[11;6H.^[[11;8HBoot Multi User [Enter]^[[12;5H2 ^[[12;6H.^[[12;8HBoot [S]ingle User^[[13;5H3 ^[[13;6H.^[[13;8H[Esc]ape to loader prompt^[[14;5H4 ^[[14;6H.^[[14;8HReboot^[[16;5HOptions:^[[17;5H5 ^[[17;6H.^[[17;8H[K]ernel: kernel (1 of 2)^[[18;5H6 ^[[18;6H.^[[18;8HConfigure Boot [O]ptions...^[[25;0H^[[23;4HAutoboot in 9 seconds. [Space] to pause^[[25;0H^[[23;4HAutoboot in 8 seconds. [Space] to pause^[[25;0H^[[23;4H ^[[25;0H|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b/boot/kernel/kernel text=0x104c6a8 |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\bdata=0x12dbb8+0x3fb0f0 |\b/\b-\b\\b|\b/\b-\b\\b|\bsyms=[0x8+0x148f98/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b+0x8+0x164832|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b]
Booting...
\\b|\b/\b-\b\\b|\bGDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r280862: Mon Mar 30 20:15:11 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
XEN: Hypervisor version 4.5 detected.
(XEN) irq.c:380: Dom1 callback via changed to Direct Vector 0x93
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.08-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x9fb82203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2139095040 (2040 MB)
avail memory = 2031874048 (1937 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <Xen HVM>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-47 on motherboard
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd1 at kbdmux0
netmap: loaded module
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dfac80, 0) error 19
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xenstore0: <XenStore> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <Xen> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 62500000 Hz quality 950
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
(XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
device_attach: isab0 attach returned 6
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc120-0xc12f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc100-0xc11f irq 23 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
xenpci0: <Xen Platform Device> port 0xc000-0xc0ff mem 0xf2000000-0xf2ffffff irq 24 at device 2.0 on pci0
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf3010000-0xf3010fff at device 3.0 on pci0
vgapci0: Boot video device
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
xenballoon0: <Xen Balloon Device> on xenstore0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_add_device: Device device/suspend/event-channel ignored. State 6
xenbusb_back0: <Xen Backend Devices> on xenstore0
xbd0: Back-end specified ring-pages of 15 is not a power of 2. Limited to 8.
xbd0: 20480MB <Virtual Block Device> at device/vbd/768 on xenbusb_front0
xbd0: attaching as ada0
xbd0: features: flush, write_barrier
xbd0: synchronize cache commands enabled.
random: unblocking device.
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus0
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <QEMU> at usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
WARNING: / was not properly dismounted
Setting hostuuid: 5fb952cf-91f0-e411-bd48-0021ccb4ebfb.
Setting hostid: 0xbf7fcc82.
Starting file system checks:
** SU+J Recovering /dev/ada0s1a
** Reading 33554432 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 91 journal records in 7168 bytes for 40.62% utilization
** Freed 1 inodes (0 dirs) 0 blocks, and 0 frags.
***** FILE SYSTEM MARKED CLEAN *****
Mounting local file systems:.
Setting hostname: hvm.
Feeding entropy:.
Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
Starting devd.
uhid0: <QEMU QEMU USB Tablet, class 0/0, rev 2.00/0.00, addr 2> on usbus0
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting default moused.
Starting background file system checks in 60 seconds.
Thu May 7 04:14:46 PDT 2015
FreeBSD/amd64 (hvm) (ttyu0)
login: root
Password:
May 7 04:14:51 hvm login: ROOT LOGIN (root) ON ttyu0
Last login: Mon May 4 05:45:19 on ttyu0
FreeBSD 11.0-CURRENT (GENERIC) #0 r280862: Mon Mar 30 20:15:11 UTC 2015
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories: https://www.FreeBSD.org/security/
FreeBSD Handbook: https://www.FreeBSD.org/handbook/
FreeBSD FAQ: https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums: https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with: pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed: freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages: man man
FreeBSD directory layout: man hier
Edit /etc/motd to change this login announcement.
root@hvm:~ # shutdpanic: acquiring blockable sleep lock with spinlock or critical section held (sleep mutex) ttymtx @ /usr/src/sys/dev/xen/console/console.c:352
cpuid = 3
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe007b5ce660
vpanic() at vpanic+0x189/frame 0xfffffe007b5ce6e0
kassert_panic() at kassert_panic+0x132/frame 0xfffffe007b5ce750
witness_checkorder() at witness_checkorder+0x10a/frame 0xfffffe007b5ce7e0
__mtx_lock_flags() at __mtx_lock_flags+0xa8/frame 0xfffffe007b5ce830
xencons_rx() at xencons_rx+0x57/frame 0xfffffe007b5ce860
xencons_handle_input() at xencons_handle_input+0x7e/frame 0xfffffe007b5ce890
xc_cngetc() at xc_cngetc+0x16/frame 0xfffffe007b5ce8b0
xc_timeout() at xc_timeout+0x44/frame 0xfffffe007b5ce8f0
softclock_call_cc() at softclock_call_cc+0x192/frame 0xfffffe007b5ce9d0
softclock() at softclock+0x47/frame 0xfffffe007b5ce9f0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe1/frame 0xfffffe007b5cea30
ithread_loop() at ithread_loop+0xac/frame 0xfffffe007b5cea70
fork_exit() at fork_exit+0x84/frame 0xfffffe007b5ceab0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe007b5ceab0
--- trap 0, rip = 0, rsp = 0xfffffe007b5ceb70, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 100007 ]
Stopped at kdb_enter+0x3e: movq $0,kdb_why
db> wn\b \b\b \bbt
Tracing pid 12 tid 100007 td 0xfffff80003895940
kdb_enter() at kdb_enter+0x3e/frame 0xfffffe007b5ce660
vpanic() at vpanic+0x1a9/frame 0xfffffe007b5ce6e0
kassert_panic() at kassert_panic+0x132/frame 0xfffffe007b5ce750
witness_checkorder() at witness_checkorder+0x10a/frame 0xfffffe007b5ce7e0
__mtx_lock_flags() at __mtx_lock_flags+0xa8/frame 0xfffffe007b5ce830
xencons_rx() at xencons_rx+0x57/frame 0xfffffe007b5ce860
xencons_handle_input() at xencons_handle_input+0x7e/frame 0xfffffe007b5ce890
xc_cngetc() at xc_cngetc+0x16/frame 0xfffffe007b5ce8b0
xc_timeout() at xc_timeout+0x44/frame 0xfffffe007b5ce8f0
softclock_call_cc() at softclock_call_cc+0x192/frame 0xfffffe007b5ce9d0
softclock() at softclock+0x47/frame 0xfffffe007b5ce9f0
intr_event_execute_handlers() at intr_event_execute_handlers+0xe1/frame 0xfffffe007b5cea30
ithread_loop() at ithread_loop+0xac/frame 0xfffffe007b5cea70
fork_exit() at fork_exit+0x84/frame 0xfffffe007b5ceab0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe007b5ceab0
--- trap 0, rip = 0, rsp = 0xfffffe007b5ceb70, rbp = 0 ---
db> reboot
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 3
(XEN) vmx.c:3169:d0v0 Bad vmexit (reason 0x3)
(XEN) domain_crash called from vmx.c:3176
(XEN) vmx.c:3169:d0v2 Bad vmexit (reason 0x3)
(XEN) vmx.c:3169:d0v3 Bad vmexit (reason 0x3)
(XEN) vmx.c:3169:d0v1 Bad vmexit (reason 0x3)
(XEN) domain_crash called from vmx.c:3176
(XEN) Domain 0 (vcpu#3) crashed on cpu#0:
(XEN) domain_crash called from vmx.c:3176
(XEN) Domain 0 (vcpu#2) crashed on cpu#1:
(XEN) Domain 0 (vcpu#0) crashed on cpu#2:
(XEN) ----[ Xen-4.5.0 x86_64 debug=n Not tainted ]----
(XEN) CPU: 1
(XEN) domain_crash called from vmx.c:3176
(XEN) RIP: 0020:[<ffffffff80eb3d52>]----[ Xen-4.5.0 x86_64 debug=n Not tainted ]----
(XEN) Domain 0 (vcpu#1) crashed on cpu#3:
(XEN) ----[ Xen-4.5.0 x86_64 debug=n Not tainted ]----
(XEN)
(XEN) RFLAGS: 0000000000000046 CPU: 2
(XEN) ----[ Xen-4.5.0 x86_64 debug=n Not tainted ]----
(XEN) CONTEXT: hvm guest
(XEN) CPU: 3
(XEN) CPU: 0
(XEN) RIP: 0020:[<ffffffff80eb6c65>]RIP: 0020:[<ffffffff80eb3d50>]
(XEN) RFLAGS: 0000000000000046 rax: 0000000000000000 rbx: 0000000000000002 rcx: 0000000000000002
(XEN)
(XEN) RFLAGS: 0000000000000097 rdx: 0000000000000004 rsi: 0000000000000000 rdi: ffffffff81953580
(XEN) CONTEXT: hvm guest
(XEN) CONTEXT: hvm guest
(XEN) rax: 0000000000000000 rbx: 0000000000000001 rcx: 0000000000000001
(XEN) rbp: fffffe007b5c4740 rsp: fffffe007b5c4730 r8: 000000c5cc68a184
(XEN) r9: 000000c5f966106f r10: 0000000000000002 r11: ffffffff81734c48
(XEN) rdx: 0000000000000002 rsi: 0000000000000000 rdi: ffffffff81953440
(XEN) r12: 0000000000000001 r13: fffff80004adf700 r14: 0000000000000000
(XEN) rbp: fffffe007b5bf740 rsp: fffffe007b5bf730 r8: 000000c5cc68a184
(XEN) RIP: 0020:[<ffffffff80eb3d50>]rax: 0000000001b897ab rbx: 0000000001b897ab rcx: 000000000000002c
(XEN) r15: fffffe007b5c4880 cr0: 000000008005003b cr4: 00000000000406e0
(XEN) r9: 000000c5fa184d71 r10: 0000000000000001 r11: ffffffff81664200
(XEN) rdx: 000000000000020b rsi: ffffffff809af150 rdi: fffff800038cfc08
(XEN) cr3: 0000000002426000 cr2: 0000000809b81f00
(XEN) ds: 003b es: 003b fs: 0013 gs: 001b ss: 0028 cs: 0020
(XEN)
(XEN) RFLAGS: 0000000000000046 CONTEXT: hvm guest
(XEN) rax: 0000000000000000 rbx: 0000000000000003 rcx: 0000000000000003
(XEN) Guest stack trace from rsp=fffffe007b5c4730:
(XEN) r12: 0000000000000001 r13: fffff80004ae0080 r14: 0000000000000000
(XEN) rbp: fffffe007ad6b6a0 rsp: fffffe007ad6b660 r8: 0000000000000000
(XEN) Fault while accessing guest memory.rdx: 0000000000000008 rsi: 0000000000000000 rdi: ffffffff819536c0
(XEN) rbp: fffffe007b5cdf50 rsp: fffffe007b5cdf40 r8: 000000c7e4e05781
(XEN) r9: 000000c804885f32 r10: 0000000000000000 r11: 0000000000000000
(XEN)
(XEN) r15: fffffe007b5bf880 cr0: 000000008005003b cr4: 00000000000406e0
(XEN) Domain 0 crashed: cr3: 0000000002426000 cr2: 00007fffffffb000
(XEN) r9: 0000000000000000 r10: 0000000000000000 r11: 0000000000000000
(XEN) ds: 003b es: 003b fs: 0013 gs: 001b ss: 0028 cs: 0020
(XEN) rebooting machine in 5 seconds.
(XEN) r12: 0000000000000001 r13: fffff80004adf000 r14: 0000000000000000
(XEN) r12: fffff800038cfc08 r13: ffffffff80eb6cc0 r14: 00000000000074b8
(XEN) Guest stack trace from rsp=fffffe007b5bf730:
(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.
\0 Xen 4.5.0
(XEN) Xen version 4.5.0 (root@) (gcc48 (FreeBSD Ports Collection) 4.8.4) debug=n Sat May 2 05:24:27 UTC 2015
(XEN) Latest ChangeSet:
(XEN) Bootloader: FreeBSD Loader
(XEN) Command line: dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 console=com1 com1=115200,8n1,pci guest_loglvl=all loglvl=all iommu=debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ac00 (usable)
(XEN) 000000000009ac00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 0000000020000000 (usable)
(XEN) 0000000020000000 - 0000000020200000 (reserved)
(XEN) 0000000020200000 - 0000000040000000 (usable)
(XEN) 0000000040000000 - 0000000040200000 (reserved)
(XEN) 0000000040200000 - 00000000bc859000 (usable)
(XEN) 00000000bc859000 - 00000000bc862000 (ACPI data)
(XEN) 00000000bc862000 - 00000000bc8ac000 (ACPI NVS)
(XEN) 00000000bc8ac000 - 00000000bc8b4000 (usable)
(XEN) 00000000bc8b4000 - 00000000bcbc5000 (reserved)
(XEN) 00000000bcbc5000 - 00000000bcbc6000 (usable)
(XEN) 00000000bcbc6000 - 00000000bcbd6000 (reserved)
(XEN) 00000000bcbd6000 - 00000000bcbf5000 (ACPI NVS)
(XEN) 00000000bcbf5000 - 00000000bcc19000 (reserved)
(XEN) 00000000bcc19000 - 00000000bcc5c000 (ACPI NVS)
(XEN) 00000000bcc5c000 - 00000000bce7c000 (reserved)
(XEN) 00000000bce7c000 - 00000000bd000000 (usable)
(XEN) 00000000bd800000 - 00000000bfa00000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed40000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000043e600000 (usable)
(XEN) ACPI: RSDP 000F0450, 0024 (r2 INTEL)
(XEN) ACPI: XSDT BC859070, 0064 (r1 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: FACP BC860B50, 00F4 (r4 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: DSDT BC859168, 79E1 (r2 INTEL DQ67EP 16 INTL 20051117)
(XEN) ACPI: FACS BCBDBF80, 0040
(XEN) ACPI: APIC BC860C48, 0072 (r3 INTEL DQ67EP 1072009 AMI 10013)
(XEN) ACPI: TCPA BC860CC0, 0032 (r2 INTEL DQ67EP 1 MSFT 1000013)
(XEN) ACPI: SSDT BC860CF8, 0102 (r1 INTEL DQ67EP 1 MSFT 3000001)
(XEN) ACPI: MCFG BC860E00, 003C (r1 INTEL DQ67EP 1072009 MSFT 97)
(XEN) ACPI: HPET BC860E40, 0038 (r1 INTEL DQ67EP 1072009 AMI. 4)
(XEN) ACPI: ASF! BC860E78, 00A0 (r32 INTEL DQ67EP 1 TFSM F4240)
(XEN) ACPI: DMAR BC860F18, 00E8 (r1 INTEL DQ67EP 1 INTL 1)
(XEN) System RAM: 16299MB (16690688kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000043e600000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fda00
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT - bcbdbf80/0000000000000000, using 32
(XEN) ACPI: wakeup_vec[bcbdbf8c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 6:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 6:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) [VT-D]dmar.c:788: Host address width 36
(XEN) [VT-D]dmar.c:802: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed90000
(XEN) [VT-D]iommu.c:1136: drhd->address = fed90000 iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:1138: cap = c0000020e60262 ecap = f0101a
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:802: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:472: dmaru->address = fed91000
(XEN) [VT-D]iommu.c:1136: drhd->address = fed91000 iommu->reg = ffff82c000203000
(XEN) [VT-D]iommu.c:1138: cap = c9008020660262 ecap = f0105a
(XEN) [VT-D]dmar.c:397: IOAPIC: 0000:f0:1f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.0
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.1
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.2
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.3
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.4
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.5
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.6
(XEN) [VT-D]dmar.c:361: MSI HPET: 0000:f0:0f.7
(XEN) [VT-D]dmar.c:486: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:807: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1d.0
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:1a.0
(XEN) [VT-D]dmar.c:676: RMRR region: base_addr bcbac000 end_address bcbbafff
(XEN) [VT-D]dmar.c:807: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:383: endpoint: 0000:00:02.0
(XEN) [VT-D]dmar.c:676: RMRR region: base_addr bd800000 end_address bf9fffff
(XEN) ERST table was not found
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X
(XEN) Switched to APIC driver x2apic_cluster.
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2500.073 MHz processor.
(XEN) Initing memory sharing.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) mce_intel.c:719: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) alt table ffff82d0802b4bb0 -> ffff82d0802b5d20
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 3f
(XEN) PCI: Not using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 32 KiB.
(XEN) mwait-idle: MWAIT substates: 0x1120
(XEN) mwait-idle: v0.4 model 0x2a
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 600 PIRQs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 -> 0xffffffff819684b8
(XEN) Dom0 symbol map 0xffffffff819684b8 -> 0xffffffff81c6d3b0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000042c000000->0000000430000000 (506992 pages to be allocated)
(XEN) Init. ramdisk: 000000043e270000->000000043e600000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff81c6d3b0
(XEN) Init. ramdisk: ffffffff81c6e000->ffffffff81ffe000
(XEN) Phys-Mach map: ffffffff81ffe000->ffffffff823fe000
(XEN) Start info: ffffffff823fe000->ffffffff823ff4b4
(XEN) Page tables: ffffffff82400000->ffffffff82417000
(XEN) Boot stack: ffffffff82417000->ffffffff82418000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff80d63000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) [VT-D]iommu.c:1420: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:02.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.2
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.3
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:19.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1a.0
(XEN) [VT-D]iommu.c:1434: d0:PCIe: map 0000:00:1b.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1d.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.0
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.2
(XEN) [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.3
(XEN) [VT-D]iommu.c:1434: d0:PCIe: map 0000:03:00.0
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000201000
(XEN) [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000203000
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) .<1>[VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Read] Request device [0000:03:00.0] fault addr bc9c1000, iommu reg = ffff82c000203000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
(XEN) print_vtd_entries: iommu ffff830434da8a20 dev 0000:03:00.0 gmfn bc9c1
(XEN) root_entry = ffff830434da3000
(XEN) root_entry[3] = 2b1954001
(XEN) context = ffff8302b1954000
(XEN) context[0] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 2
(XEN) l3[2] = 24015b003
(XEN) l2 = ffff83024015b000
(XEN) l2_index = 1e4
(XEN) l2[1e4] = 0
(XEN) l2[1e4] not present
(XEN) .................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 280kB init memory.
FreeBSD PVH running on xen-3.0-x86_64p
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009ac00
SMAP type=02 base=000000000009ac00 len=0000000000005400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000001ff00000
SMAP type=02 base=0000000020000000 len=0000000000200000
SMAP type=01 base=0000000020200000 len=000000001fe00000
SMAP type=02 base=0000000040000000 len=0000000000200000
SMAP type=01 base=0000000040200000 len=0000000040265000
SMAP type=03 base=00000000bc859000 len=0000000000009000
SMAP type=04 base=00000000bc862000 len=000000000004a000
SMAP type=02 base=00000000bc8b4000 len=0000000000311000
SMAP type=02 base=00000000bcbc6000 len=0000000000010000
SMAP type=04 base=00000000bcbd6000 len=000000000001f000
SMAP type=02 base=00000000bcbf5000 len=0000000000024000
SMAP type=04 base=00000000bcc19000 len=0000000000043000
SMAP type=02 base=00000000bcc5c000 len=0000000000220000
SMAP type=02 base=00000000bd800000 len=0000000002200000
SMAP type=02 base=00000000fed1c000 len=0000000000024000
SMAP type=02 base=00000000ff000000 len=0000000001000000
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
APIC: Using the Xen PV enumerator.
SMP: Added CPU 0 (BSP)
SMP: Added CPU 2 (AP)
SMP: Added CPU 4 (AP)
SMP: Added CPU 6 (AP)
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r282110: Mon Apr 27 20:49:15 UTC 2015
root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
WARNING: WITNESS option enabled, expect reduced performance.
VT: running with driver "vga".
(XEN) irq.c:380: Dom0 callback via changed to Direct Vector 0x93
Preloaded elf multiboot kernel "/boot/xen" at 0xffffffff81c6e000.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81c6e198.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81c6e270.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81c6ea58.
Calibrating TSC clock ... TSC clock: 2500017684 Hz
CPU: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (2500.02-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA,CMOV,PAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
TSC: P-state invariant, performance statistics
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
Hypervisor: Origin = "XenVMMXenVMM"
real memory = 2152091648 (2052 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002448000 - 0x000000001fffffff, 498827264 bytes (121784 pages)
0x0000000020200000 - 0x000000003fffffff, 534773760 bytes (130560 pages)
0x0000000040200000 - 0x000000007cfbefff, 1021046784 bytes (249279 pages)
avail memory = 2031779840 (1937 MB)
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x001000-0x001fff at 0xfffffe00929f8000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
Xen interrupt system initialized
Table 'FACP' at 0xbc860b50
Table 'APIC' at 0xbc860c48
APIC: Found table at 0xbc860c48
ACPI: RSDP 0x00000000000F0450 000024 (v02 INTEL )
ACPI: XSDT 0x00000000BC859070 000064 (v01 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: FACP 0x00000000BC860B50 0000F4 (v04 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BC859168 0079E1 (v02 INTEL DQ67EP 00000016 INTL 20051117)
ACPI: FACS 0x00000000BCBDBF80 000040
ACPI: APIC 0x00000000BC860C48 000072 (v03 INTEL DQ67EP 01072009 AMI 00010013)
ACPI: TCPA 0x00000000BC860CC0 000032 (v02 INTEL DQ67EP 00000001 MSFT 01000013)
ACPI: SSDT 0x00000000BC860CF8 000102 (v01 INTEL DQ67EP 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BC860E00 00003C (v01 INTEL DQ67EP 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BC860E40 000038 (v01 INTEL DQ67EP 01072009 AMI. 00000004)
ACPI: ASF! 0x00000000BC860E78 0000A0 (v32 INTEL DQ67EP 00000001 TFSM 000F4240)
ACPI: XMAR 0x00000000BC860F18 0000E8 (v01 INTEL DQ67EP 00000001 INTL 00000001)
MADT: Interrupt override: source 0, irq 2
xen: register IRQ#2
MADT: Interrupt override: source 9, irq 9
xen: register IRQ#9
xen: register IRQ#1
xen: register IRQ#3
xen: register IRQ#4
xen: register IRQ#5
xen: register IRQ#6
xen: register IRQ#7
xen: register IRQ#8
xen: register IRQ#10
xen: register IRQ#11
xen: register IRQ#12
xen: register IRQ#13
xen: register IRQ#14
xen: register IRQ#15
cpu0 BSP XEN PV LAPIC
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
netmap: loaded module
null: <full device, null device, zero device>
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
module_register_init: MOD_LOAD (vesa, 0xffffffff80dec6c0, 0) error 19
io: <I/O>
VMBUS: load
hptnr: R750/DC7280 controller driver v1.1.1
hpt27xx: RocketRAID 27xx controller driver v1.1
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
vtvga0: <VT VGA driver> on motherboard
xenpv0: <Xen PV bus> on motherboard
granttable0: <Xen Grant-table Device> on xenpv0
Grant table initialized
xc0: <Xen Console> on xenpv0
xen_et0: <Xen PV Clock> on xenpv0
Event timer "XENTIMER" frequency 1000000000 Hz quality 950
Timecounter "XENTIMER" frequency 1000000000 Hz quality 950
xen_et0: registered as a time-of-day clock (resolution 10000000us, adjustment 5.000000000s)
pvcpu0: <Xen PV CPU> on xenpv0
pvcpu1: <Xen PV CPU> on xenpv0
pvcpu2: <Xen PV CPU> on xenpv0
pvcpu3: <Xen PV CPU> on xenpv0
xenstore0: <XenStore> on xenpv0
xsd_dev0: <Xenstored user-space device> on xenpv0
evtchn0: <Xen event channel user-space device> on xenpv0
privcmd0: <Xen privileged interface user-space device> on xenpv0
debug0: <Xen debug handler> on xenpv0
isa0: <ISA bus> on xenpv0
acpi0: <INTEL DQ67EP> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xe0000000
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: not installed as time-of-day clock: clock xen_et has higher resolution
Event timer "RTC" frequency 32768 Hz quality 0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xff
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0xcf7
pcib0: decoding 4 range 0x3b0-0x3df
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xbfa00000-0xffffffff
pci0: <Xen ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x0100, revid=0x09
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) PCI add device 0000:00:00.0
found-> vendor=0x8086, dev=0x0101, revid=0x09
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
xen: register IRQ#16
secbus=1, subbus=1
(XEN) PCI add device 0000:00:01.0
found-> vendor=0x8086, dev=0x0102, revid=0x09
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xfe000000, size 22, enabled
pcib0: allocated type 3 (0xfe000000-0xfe3fffff) for rid 10 of pci0:0:2:0
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0
map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled
pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:02.0
found-> vendor=0x8086, dev=0x1c3a, revid=0x04
domain=0, bus=0, slot=22, func=0
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0018, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe52a000, size 4, enabled
pcib0: allocated type 3 (0xfe52a000-0xfe52a00f) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
(XEN) PCI add device 0000:00:16.0
found-> vendor=0x8086, dev=0x1c3c, revid=0x04
domain=0, bus=0, slot=22, func=2
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf130, size 3, enabled
pcib0: allocated type 4 (0xf130-0xf137) for rid 10 of pci0:0:22:2
map[14]: type I/O Port, range 32, base 0xf120, size 2, enabled
pcib0: allocated type 4 (0xf120-0xf123) for rid 14 of pci0:0:22:2
map[18]: type I/O Port, range 32, base 0xf110, size 3, enabled
pcib0: allocated type 4 (0xf110-0xf117) for rid 18 of pci0:0:22:2
map[1c]: type I/O Port, range 32, base 0xf100, size 2, enabled
pcib0: allocated type 4 (0xf100-0xf103) for rid 1c of pci0:0:22:2
map[20]: type I/O Port, range 32, base 0xf0f0, size 4, enabled
pcib0: allocated type 4 (0xf0f0-0xf0ff) for rid 20 of pci0:0:22:2
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 18
xen: register IRQ#18
(XEN) PCI add device 0000:00:16.2
found-> vendor=0x8086, dev=0x1c3d, revid=0x04
domain=0, bus=0, slot=22, func=3
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0xf0e0, size 3, enabled
pcib0: allocated type 4 (0xf0e0-0xf0e7) for rid 10 of pci0:0:22:3
map[14]: type Memory, range 32, base 0xfe529000, size 12, enabled
pcib0: allocated type 3 (0xfe529000-0xfe529fff) for rid 14 of pci0:0:22:3
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
xen: register IRQ#17
(XEN) PCI add device 0000:00:16.3
found-> vendor=0x8086, dev=0x1502, revid=0x04
domain=0, bus=0, slot=25, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfe500000, size 17, enabled
pcib0: allocated type 3 (0xfe500000-0xfe51ffff) for rid 10 of pci0:0:25:0
map[14]: type Memory, range 32, base 0xfe528000, size 12, enabled
pcib0: allocated type 3 (0xfe528000-0xfe528fff) for rid 14 of pci0:0:25:0
map[18]: type I/O Port, range 32, base 0xf080, size 5, enabled
pcib0: allocated type 4 (0xf080-0xf09f) for rid 18 of pci0:0:25:0
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
xen: register IRQ#20
(XEN) PCI add device 0000:00:19.0
found-> vendor=0x8086, dev=0x1c2d, revid=0x04
domain=0, bus=0, slot=26, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe527000, size 10, enabled
pcib0: allocated type 3 (0xfe527000-0xfe5273ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
ehci early: SMM active, request owner change
(XEN) PCI add device 0000:00:1a.0
found-> vendor=0x8086, dev=0x1c20, revid=0x04
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe520000, size 14, enabled
pcib0: allocated type 3 (0xfe520000-0xfe523fff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
xen: register IRQ#22
(XEN) PCI add device 0000:00:1b.0
found-> vendor=0x8086, dev=0x1c10, revid=0xb4
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
secbus=2, subbus=2
(XEN) PCI add device 0000:00:1c.0
found-> vendor=0x8086, dev=0x1c1c, revid=0xb4
domain=0, bus=0, slot=28, func=6
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
secbus=3, subbus=3
(XEN) PCI add device 0000:00:1c.6
found-> vendor=0x8086, dev=0x1c26, revid=0x04
domain=0, bus=0, slot=29, func=0
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe526000, size 10, enabled
pcib0: allocated type 3 (0xfe526000-0xfe5263ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
xen: register IRQ#23
ehci early: SMM active, request owner change
(XEN) PCI add device 0000:00:1d.0
found-> vendor=0x8086, dev=0x244e, revid=0xa4
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
secbus=4, subbus=4
(XEN) PCI add device 0000:00:1e.0
found-> vendor=0x8086, dev=0x1c4e, revid=0x04
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
(XEN) PCI add device 0000:00:1f.0
found-> vendor=0x8086, dev=0x1c02, revid=0x04
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xf0d0, size 3, enabled
pcib0: allocated type 4 (0xf0d0-0xf0d7) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0xf0c0, size 2, enabled
pcib0: allocated type 4 (0xf0c0-0xf0c3) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0xf0b0, size 3, enabled
pcib0: allocated type 4 (0xf0b0-0xf0b7) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0xf0a0, size 2, enabled
pcib0: allocated type 4 (0xf0a0-0xf0a3) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled
pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xfe525000, size 11, enabled
pcib0: allocated type 3 (0xfe525000-0xfe5257ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
xen: register IRQ#19
(XEN) PCI add device 0000:00:1f.2
found-> vendor=0x8086, dev=0x1c22, revid=0x04
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0xfe524000, size 8, enabled
pcib0: allocated type 3 (0xfe524000-0xfe5240ff) for rid 10 of pci0:0:31:3
map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled
pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
(XEN) PCI add device 0000:00:1f.3
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pci1: <Xen ACPI PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
agp0: AGP_SNB_GFX_MODE: 00000000
agp0: AGP_SNB_GCC1: 0x0209
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 524288
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe529000-0xfe529fff irq 17 at device 22.3 on pci0
uart2: fast interrupt
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf080-0xf09f mem 0xfe500000-0xfe51ffff,0xfe528000-0xfe528fff irq 20 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:22:4d:51:4c:0c
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe527000-0xfe5273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe520000-0xfe523fff irq 22 at device 27.0 on pci0
hdac0: PCI card vendor: 0x8086, device: 0x200f
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
hdac0: using IRQ 257 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pci2: <Xen ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pcib0: allocated type 3 (0xfe400000-0xfe4fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xfe400000-0xfe4fffff
pci3: <Xen ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x1033, dev=0x0194, revid=0x03
domain=0, bus=3, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
MSI-X supports 8 messages in map 0x10
map[10]: type Memory, range 64, base 0xfe400000, size 13, enabled
pcib3: allocated memory range (0xfe400000-0xfe401fff) for rid 10 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
(XEN) PCI add device 0000:03:00.0
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe400000-0xfe401fff irq 18 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
xhci0: using IRQ 258 for MSI
xhci0: MSI enabled
usbus1 on xhci0
xhci0: usbpf: Attached
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe526000-0xfe5263ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
ehci1: usbpf: Attached
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: special decode subtractive
pci4: <Xen ACPI PCI bus> on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa: isa0 already exists; skipping it
device_attach: isab0 attach returned 6
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe525000-0xfe5257ff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
ahci0: using IRQ 259 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 6ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: not probed (disabled)
ahcich2: not probed (disabled)
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: HPCP ESP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: HPCP ESP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
ACPI: Enabled 3 GPEs in block 00 to 3F
acpi0: wakeup code va 0xfffffe0096c75000 pa 0x4000
ahc_isa_identify 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0 failed to probe on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
device_attach: atkbd0 attach returned 6
psm0: unable to allocate IRQ
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
usbus0: 480Mbps High Speed USB v2.0
procfs registered
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x8086200f
hdaa0: NumGPIO=2 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 23 99130140 4 0 Speaker Fixed ATAPI Onboard Unknown 1
hdaa0: 24 01a19c50 5 0 Mic Jack 1/8 Rear Pink 12
hdaa0: 25 02a19960 6 0 Mic Jack 1/8 Front Pink 9
hdaa0: 26 0181345f 5 15 Line-in Jack 1/8 Rear Blue 4
hdaa0: 27 02214120 2 0 Headphones Jack 1/8 Front Green 1
hdaa0: 28 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: 29 4004c601 0 1 Line-out None RCA 0x00 Res.C 6
hdaa0: 30 99430130 3 0 SPDIF-out Fixed ATAPI Onboard Unknown 1
hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1
hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 17 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 18 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 20 01014410 1 0 Line-out Jack 1/8 Rear Green 4
hdaa0: 21 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 22 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA
hdaa0: 23 99130140 4 0 Speaker Fixed ATAata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ugen1.2: <vendor 0x05e3> at usbus1
uhub3: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 1> on usbus1
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
uhub3: 4 ports with 4 removable, self powered
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ahcich0: AHCI reset...
ahcich0: SATA connect time=1800us status=00000113
ahcich0: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=900us status=00000113
ahcich3: AHCI reset: device found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
ahcich0: AHCI reset: device ready after 100ms
uhub4: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x05e3> at usbus1
uhub6: <vendor 0x05e3 product 0x0606, class 9/0, rev 2.00/7.02, addr 2> on usbus1
uhub5: 8 ports with 8 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <BTC> at usbus1
ukbd0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen1.5: <Logitech> at usbus1
ahcich3: AHCI reset: device not ready after 31000ms (tfd = 00000080)
ahcich3: Poll timeout on slot 2 port 0
ahcich3: is 00000000 cs 00000004 ss 00000000 rs 00000004 tfd 80 serr 00000000 cmd 0000c217
(aprobe2:ahcich3:0:0:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:0:0): CAM status: Command timeout
(aprobe2:ahcich3:0:0:0): Error 5, Retries exhausted
GEOM: new disk ada0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
ada0: Serial Number 5198PGXPT
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
pass0 at ahcich0 bus 0 scbus2 target 0 lun 0
pass0: <TOSHIBA MK1059GSM GL001U> ATA8-ACS SATA 1.x device
pass0: Serial Number 5198PGXPT
pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahciem0 bus 0 scbus6 target 0 lun 0
pass1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: Generation Code 0x0 has 1 SubEnclosures
ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
ses0: WWN: 0
ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0:
random: unblocking device.
Netvsc initializing... done!
SMP: AP CPU #1 Launched!
cpu1 AP XEN PV LAPIC
SMP: AP CPU #2 Launched!
cpu2 AP XEN PV LAPIC
SMP: AP CPU #3 Launched!
cpu3 AP XEN PV LAPIC
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1250008842 Hz quality -100
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
start_init: trying /sbin/init
Setting hostuuid: f2ef92ba-0480-e011-a3af-000e0ca9794e.
Setting hostid: 0x643fc703.
warning: total configured swap (4194304 pages) exceeds maximum recommended amount (4016272 pages).
warning: increase kern.maxswzone or reduce amount of swap.
Starting file system checks:
Mounting local file systems:.
Setting hostname: i5.
Feeding entropy:.
em0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP
Starting Network: lo0 em0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:22:4d:51:4c:0c
inet 192.168.1.215 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Starting devd.
uhid0: <BTC USB Keyboard, class 0/0, rev 1.10/1.80, addr 3> on usbus1
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 4> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
Starting ums0 moused.
add net default: gateway 192.168.1.1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/gcc48 /usr/local/llvm35/lib
32-bit compatibility ldconfig path: /usr/lib32
Creating and/or trimming log files.
Starting syslogd.
No core dumps found.
Starting casperd.
Clearing /tmp (X related).
Cleaning xenstore database.
Starting xenservices: xenstored, xenconsoled.May 7 11:16:57 i5 xenstored: Checking store ...
May 7 11:16:57 i5 xenstored: Checking store complete.
WARNING: Failed to open connection to gnttab
xenballoon0: <Xen Balloon Device> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
xs_dev0: <Xenstore user-space device> on xenstore0
xenbusb_front0: <Xen Frontend Devices> on xenstore0
xenbusb_back0: <Xen Backend Devices> on xenstore0
Setting domain 0 name, domid and JSON config...
Done setting up Dom0
Updating motd:.
Mounting late file systems:.
Starting default mousedmoused: unable to open /dev/psm0: No such file or directory
.
Starting dbus.
Starting hald.
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.
Thu May 7 11:16:59 PDT 2015
FreeBSD/amd64 (i5) (xc0)
login: ~
[EOT]
root@x220:~ # sh serial.sh
Connected
login: root
Password:
May 7 11:17:29 i5 login: ROOT LOGIN (root) ON xc0
Last login: Thu May 7 11:10:13 on xc0
FreeBSD 11.0-CURRENT (GENERIC) #0 r282110: Mon Apr 27 20:49:15 UTC 2015
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories: https://www.FreeBSD.org/security/
FreeBSD Handbook: https://www.FreeBSD.org/handbook/
FreeBSD FAQ: https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums: https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with: pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed: freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages: man man
FreeBSD directory layout: man hier
Edit /etc/motd to change this login announcement.
root@i5:~ # echo "that was without xorg!"
that was without xorg!
root@i5:~ # echo "stat\b^[[Krting xorg on the hardware console"
starting xorg on the hardware console
root@i5:~ # May 7 11:18:06 i5 login: ROOT LOGIN (root) ON ttyv0
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel SandyBridge> on vgapci0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
vgapci0: using IRQ 260 for MSI
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
interrupt storm detected on "irq16:"; throttling interrupt source
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-3
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-3: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-3
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
drmn0: No ACPI video bus found
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
error: [drm:pid802:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 155
00 ff ff ff ff ff ff 00 04 72 19 00 8a 62 91 05
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
error: [drm:pid802:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 120
00 ff ff ff ff ff ff 00 04 72 19 00 8a 62 91 04
31 14 01 03 08 22 1b 78 ea dc 55 a3 59 48 9e 24
11 50 54 bf ef 80 71 4f 01 01 01 01 01 01 01 01
01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
13 00 52 0e 11 ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
error: [drm:pid802:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 91
00 ff ff ff ff ff ff 00 04 72 19 00 8a 62 91 04
31 14 01 03 08 22 1b 78 ea dc 55 a3 59 48 9e 24
11 50 54 bf ef 80 71 4f 01 01 01 01 01 01 01 01
01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1e
53 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 4c
42 4e 30 43 31 39 34 34 30 42 37 0a 00 00 00 fc
01 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
error: [drm:pid802:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 16000000, was 12000000
root@i5:~ # cd xen
root@i5:~/xen # cat fbsdss\b^[[Ker\aial.cfg
builder="hvm"
memory = 2048
vcpus = 2
name = "FreeBSD"
disk = [ '/root/xen/fbsdserial.img,raw,hda,w' ]
boot = "c"
usbdevice = 'tablet'
serial = 'pty'
root@i5:~/xen # xl -vvv crate\b^[[K\b^[[K\b^[[K\b^[[K\b^[[K\bvv\b^[[K create -c fbsdser\aial.cfg
Parsing config from fbsdserial.cfg
libxl: debug: libxl_create.c:1501:do_domain_create: ao 0x802c46080: create: how=0x0 callback=0x0 poller=0x802c1f0a0
libxl: debug: libxl_device.c:269:libxl__device_disk_set_backend: Disk vdev=hda spec.backend=unknown
libxl: debug: libxl_device.c:298:libxl__device_disk_set_backend: Disk vdev=hda, using backend phy
libxl: debug: libxl_create.c:907:initiate_domain_create: running bootloader
libxl: debug: libxl_bootloader.c:323:libxl__bootloader_run: not a PV domain, skipping bootloader
libxl: debug: libxl_event.c:629:libxl__ev_xswatch_deregister: watch w=0x802c37770: deregister unregistered
xc: detail: elf_parse_binary: phdr: paddr=0x100000 memsz=0x599ec
xc: detail: elf_parse_binary: memory: 0x100000 -> 0x1599ec
xc: detail: VIRTUAL MEMORY ARRANGEMENT:
xc: detail: Loader: 0000000000100000->00000000001599ec
xc: detail: Modules: 0000000000000000->0000000000000000
xc: detail: TOTAL: 0000000000000000->000000007f800000
xc: detail: ENTRY: 0000000000100000
xc: detail: PHYSICAL MEMORY ALLOCATION:
xc: detail: 4KB PAGES: 0x0000000000000200
xc: detail: 2MB PAGES: 0x00000000000003fb
xc: detail: 1GB PAGES: 0x0000000000000000
xc: detail: elf_load_binary: phdr 0 at 0x80067a000 -> 0x8006ca991
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 402880000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 402880
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 10
(XEN) l3[10] = 0
(XEN) l3[10] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 40265c000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 40265c
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 10
(XEN) l3[10] = 0
(XEN) l3[10] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 402971000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 402971
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 10
(XEN) l3[10] = 0
(XEN) l3[10] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 402674000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 402674
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 10
(XEN) l3[10] = 0
(XEN) l3[10] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:861: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:839: DMAR:[DMA Write] Request device [0000:00:02.0] fault addr 4147562000, iommu reg = ffff82c000201000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu ffff830434da8640 dev 0000:00:02.0 gmfn 4147562
(XEN) root_entry = ffff830434da5000
(XEN) root_entry[0] = 2b1956001
(XEN) context = ffff8302b1956000
(XEN) context[10] = 1_24015e001
(XEN) l3 = ffff83024015e000
(XEN) l3_index = 105
(XEN) l3[105] = 0
(XEN) l3[105] not present
(XEN) [VT-D]iommu.c:859: iommu_fault_sta\0\0~
[EOT]
root@x220:~ #
root@x220:~ # exit
[-- Attachment #4: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 13+ messages in thread