[PATCH 6/6] ARM: dts: sun8i: Add ET-Q8 A33 support

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 11-05-15 13:15, Vishnu Patekar wrote:
> Hi,
>
> On Mon, May 11, 2015 at 1:57 PM, Hans de Goede <hdegoede@redhat.com> wrote:
>> Hi,
>>
>> On 11-05-15 10:24, Hans de Goede wrote:
>>>
>>> Hi,
>>>
>>> On 11-05-15 08:23, Vishnu Patekar wrote:
>>>>
>>>> Hi,
>>>>
>>>> On Sun, May 10, 2015 at 2:24 PM, Hans de Goede <hdegoede@redhat.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> Hi,
>>>>>
>>>>> On 10-05-15 08:46, Vishnu Patekar wrote:
>>>>>>
>>>>>>
>>>>>> ET-Q8_A33 is A33 based cheap tablet in common Q8 format.
>>>>>>
>>>>>> It has 512MB RAM, 4GB Nand, 7" Display, RDA5900P wifi, GSL1680 touch,
>>>>>> etc.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Where does the ET prefix come from ? The ippo boards have an ippo prefix
>>>>> as
>>>>> that is written on the pcb ...
>>>>
>>>> Yes, on PCB it's writeen ET_Q8_A23_A33_v1.6
>>>
>>>
>>> OK, using the ET prefix is fine then.
>>
>>
>> But can you please rename the dts to include the v1.6 bit ? And can you also
>> send a u-boot patch to rename the defconfig there to
>> et_q8_v1_6_a33_defconfig,
>> and fix the CONFIG_DEFAULT_DEVICE_TREE setting too ?
>
> Yes, I'll rename it to sun8i-a33-et-q8-v1.6.dts and will add
> compatible as "et,q8-v1.6"

Please include a33 in the compatible since we may see the same board
being used with an a23.

Regards,

Hans

> I'll send u-boot patch as well.
>>
>> Regards,
>>
>> Hans
>>
>>
>>>
>>> Regards,
>>>
>>> Hans
>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Hans
>>>>>
>>>>>
>>>>>>
>>>>>> Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
>>>>>> ---
>>>>>>     arch/arm/boot/dts/Makefile            |   3 +-
>>>>>>     arch/arm/boot/dts/sun8i-a33-et-q8.dts | 108
>>>>>> ++++++++++++++++++++++++++++++++++
>>>>>>     2 files changed, 110 insertions(+), 1 deletion(-)
>>>>>>     create mode 100644 arch/arm/boot/dts/sun8i-a33-et-q8.dts
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>>>> index 82f4b9b..d44b1d6 100644
>>>>>> --- a/arch/arm/boot/dts/Makefile
>>>>>> +++ b/arch/arm/boot/dts/Makefile
>>>>>> @@ -570,7 +570,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>>>>>>           sun7i-a20-wexler-tab7200.dtb
>>>>>>     dtb-$(CONFIG_MACH_SUN8I) += \
>>>>>>           sun8i-a23-ippo-q8h-v5.dtb \
>>>>>> -       sun8i-a23-ippo-q8h-v1.2.dtb
>>>>>> +       sun8i-a23-ippo-q8h-v1.2.dtb \
>>>>>> +       sun8i-a33-et-q8.dtb
>>>>>>     dtb-$(CONFIG_MACH_SUN9I) += \
>>>>>>           sun9i-a80-optimus.dtb \
>>>>>>           sun9i-a80-cubieboard4.dtb
>>>>>> diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8.dts
>>>>>> b/arch/arm/boot/dts/sun8i-a33-et-q8.dts
>>>>>> new file mode 100644
>>>>>> index 0000000..260d5a3
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm/boot/dts/sun8i-a33-et-q8.dts
>>>>>> @@ -0,0 +1,108 @@
>>>>>> +/*
>>>>>> + * Copyright 2015 Vishnu Patekar
>>>>>> + * Vishnu Patekar <vishnupatekar0510@gmail.com>
>>>>>> + *
>>>>>> + * This file is dual-licensed: you can use it either under the terms
>>>>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>>>>> + * licensing only applies to this file, and not this project as a
>>>>>> + * whole.
>>>>>> + *
>>>>>> + *  a) This file is free software; you can redistribute it and/or
>>>>>> + *     modify it under the terms of the GNU General Public License as
>>>>>> + *     published by the Free Software Foundation; either version 2 of
>>>>>> the
>>>>>> + *     License, or (at your option) any later version.
>>>>>> + *
>>>>>> + *     This file is distributed in the hope that it will be useful,
>>>>>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>>>> + *     GNU General Public License for more details.
>>>>>> + *
>>>>>> + *
>>>>>> + * Or, alternatively,
>>>>>> + *
>>>>>> + *  b) Permission is hereby granted, free of charge, to any person
>>>>>> + *     obtaining a copy of this software and associated documentation
>>>>>> + *     files (the "Software"), to deal in the Software without
>>>>>> + *     restriction, including without limitation the rights to use,
>>>>>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>>>>>> + *     sell copies of the Software, and to permit persons to whom the
>>>>>> + *     Software is furnished to do so, subject to the following
>>>>>> + *     conditions:
>>>>>> + *
>>>>>> + *     The above copyright notice and this permission notice shall be
>>>>>> + *     included in all copies or substantial portions of the Software.
>>>>>> + *
>>>>>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>>>>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>>>>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>>>>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>>>>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>>>>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>>>>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>>>>> + *     OTHER DEALINGS IN THE SOFTWARE.
>>>>>> + */
>>>>>> +
>>>>>> +/dts-v1/;
>>>>>> +#include "sun8i-a33.dtsi"
>>>>>> +#include "sunxi-common-regulators.dtsi"
>>>>>> +
>>>>>> +#include <dt-bindings/gpio/gpio.h>
>>>>>> +#include <dt-bindings/input/input.h>
>>>>>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>>>>>> +
>>>>>> +/ {
>>>>>> +       model = "ET Q8 A33 ";
>>>>>> +       compatible = "et-q8-q33", "allwinner,sun8i",
>>>>>> "allwinner,sun8i-a33";
>>>>>> +
>>>>>> +       aliases {
>>>>>> +               serial0 = &uart0;
>>>>>> +       };
>>>>>> +
>>>>>> +       chosen {
>>>>>> +               bootargs = "earlyprintk console=ttyS0,115200";
>>>>>> +       };
>>>>>> +};
>>>>>> +
>>>>>> +&lradc {
>>>>>> +       vref-supply = <&reg_vcc3v0>;
>>>>>> +       status = "okay";
>>>>>> +
>>>>>> +       button at 200 {
>>>>>> +               label = "Volume Up";
>>>>>> +               linux,code = <KEY_VOLUMEUP>;
>>>>>> +               channel = <0>;
>>>>>> +               voltage = <200000>;
>>>>>> +       };
>>>>>> +
>>>>>> +       button at 400 {
>>>>>> +               label = "Volume Down";
>>>>>> +               linux,code = <KEY_VOLUMEDOWN>;
>>>>>> +               channel = <0>;
>>>>>> +               voltage = <400000>;
>>>>>> +       };
>>>>>> +};
>>>>>> +
>>>>>> +&i2c0 {
>>>>>> +       pinctrl-names = "default";
>>>>>> +       pinctrl-0 = <&i2c0_pins_a>;
>>>>>> +       status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&i2c1 {
>>>>>> +       pinctrl-names = "default";
>>>>>> +       pinctrl-0 = <&i2c1_pins_a>;
>>>>>> +       status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&i2c2 {
>>>>>> +       pinctrl-names = "default";
>>>>>> +       pinctrl-0 = <&i2c2_pins_a>;
>>>>>> +       /* pull-ups and devices require PMIC regulator */
>>>>>> +       status = "failed";
>>>>>> +};
>>>>>> +
>>>>>> +&uart0 {
>>>>>> +       pinctrl-names = "default";
>>>>>> +       pinctrl-0 = <&uart0_pins_a>;
>>>>>> +       status = "okay";
>>>>>> +};
>>>>>>
>>