All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
To: "Maciej W. Rozycki" <macro@linux-mips.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Martin <paul.martin@codethink.co.uk>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>,
	James Hogan <james.hogan@imgtec.com>, <linux-mips@linux-mips.org>
Subject: Re: [PATCH v2] MIPS: Fix a preemption issue with thread's FPU defaults
Date: Tue, 12 May 2015 14:28:23 -0300	[thread overview]
Message-ID: <55523837.5040207@imgtec.com> (raw)
In-Reply-To: <alpine.LFD.2.11.1505121432540.1538@eddie.linux-mips.org>



On 05/12/2015 11:20 AM, Maciej W. Rozycki wrote:
> Fix "BUG: using smp_processor_id() in preemptible" reported in accesses 
> to thread's FPU defaults: the value to initialise FSCR to at program 
> startup, the FCSR r/w mask and the contents of FIR in full FPU 
> emulation, removing a regression introduced with 9b26616c [MIPS: Respect 
> the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR 
> feature flags for full emulation].
> 
> Use `boot_cpu_data' to obtain the data from, following the approach that 
> `cpu_has_*' macros take and avoiding the call to `smp_processor_id' made 
> in the reference to `current_cpu_data'.  The contents of FSCR have to be 
> consistent across processors in an SMP system, the settings there must 
> not change as a thread is migrated across processors.  And the contents 
> of FIR are guaranteed to be consistent in FPU emulation, by definition.
> 
> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
> ---
> Changes from v1:
> 
> - also fix PTRACE_SETFPREGS (thanks, Paul!).
> 
> Paul, Ezequiel --
> 
>  Can you verify this change addresses the problems you saw?
> 

Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>

> [Ralf, this is another 4.1 material, please push it to Linus ASAP, once 
> this has been confirmed to DTRT.]
> 
>  Thanks,
> 
>   Maciej
> 
> linux-mips-emu-fcsr-isa-fix.diff
> Index: linux-org-test/arch/mips/include/asm/elf.h
> ===================================================================
> --- linux-org-test.orig/arch/mips/include/asm/elf.h	2015-05-06 23:20:51.946503000 +0100
> +++ linux-org-test/arch/mips/include/asm/elf.h	2015-05-12 14:37:14.169350000 +0100
> @@ -304,7 +304,7 @@ do {									\
>  									\
>  	current->thread.abi = &mips_abi;				\
>  									\
> -	current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31;		\
> +	current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31;		\
>  } while (0)
>  
>  #endif /* CONFIG_32BIT */
> @@ -366,7 +366,7 @@ do {									\
>  	else								\
>  		current->thread.abi = &mips_abi;			\
>  									\
> -	current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31;		\
> +	current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31;		\
>  									\
>  	p = personality(current->personality);				\
>  	if (p != PER_LINUX32 && p != PER_LINUX)				\
> Index: linux-org-test/arch/mips/kernel/ptrace.c
> ===================================================================
> --- linux-org-test.orig/arch/mips/kernel/ptrace.c	2015-04-28 14:52:04.000000000 +0100
> +++ linux-org-test/arch/mips/kernel/ptrace.c	2015-05-12 15:12:03.511002000 +0100
> @@ -176,7 +176,7 @@ int ptrace_setfpregs(struct task_struct 
>  
>  	__get_user(value, data + 64);
>  	fcr31 = child->thread.fpu.fcr31;
> -	mask = current_cpu_data.fpu_msk31;
> +	mask = boot_cpu_data.fpu_msk31;
>  	child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
>  
>  	/* FIR may not be written.  */
> Index: linux-org-test/arch/mips/math-emu/cp1emu.c
> ===================================================================
> --- linux-org-test.orig/arch/mips/math-emu/cp1emu.c	2015-04-28 14:52:04.000000000 +0100
> +++ linux-org-test/arch/mips/math-emu/cp1emu.c	2015-05-12 14:41:06.308256000 +0100
> @@ -889,7 +889,7 @@ static inline void cop1_cfc(struct pt_re
>  		break;
>  
>  	case FPCREG_RID:
> -		value = current_cpu_data.fpu_id;
> +		value = boot_cpu_data.fpu_id;
>  		break;
>  
>  	default:
> @@ -921,7 +921,7 @@ static inline void cop1_ctc(struct pt_re
>  			 (void *)xcp->cp0_epc, MIPSInst_RT(ir), value);
>  
>  		/* Preserve read-only bits.  */
> -		mask = current_cpu_data.fpu_msk31;
> +		mask = boot_cpu_data.fpu_msk31;
>  		fcr31 = (value & ~mask) | (fcr31 & mask);
>  		break;
>  
> 

-- 
Ezequiel

WARNING: multiple messages have this Message-ID (diff)
From: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
To: "Maciej W. Rozycki" <macro@linux-mips.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Martin <paul.martin@codethink.co.uk>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>,
	James Hogan <james.hogan@imgtec.com>,
	linux-mips@linux-mips.org
Subject: Re: [PATCH v2] MIPS: Fix a preemption issue with thread's FPU defaults
Date: Tue, 12 May 2015 14:28:23 -0300	[thread overview]
Message-ID: <55523837.5040207@imgtec.com> (raw)
Message-ID: <20150512172823.X-vexcmxJPDPhmS7IcYUoeC1Bh9pLP1TDMovFSEhN_A@z> (raw)
In-Reply-To: <alpine.LFD.2.11.1505121432540.1538@eddie.linux-mips.org>



On 05/12/2015 11:20 AM, Maciej W. Rozycki wrote:
> Fix "BUG: using smp_processor_id() in preemptible" reported in accesses 
> to thread's FPU defaults: the value to initialise FSCR to at program 
> startup, the FCSR r/w mask and the contents of FIR in full FPU 
> emulation, removing a regression introduced with 9b26616c [MIPS: Respect 
> the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR 
> feature flags for full emulation].
> 
> Use `boot_cpu_data' to obtain the data from, following the approach that 
> `cpu_has_*' macros take and avoiding the call to `smp_processor_id' made 
> in the reference to `current_cpu_data'.  The contents of FSCR have to be 
> consistent across processors in an SMP system, the settings there must 
> not change as a thread is migrated across processors.  And the contents 
> of FIR are guaranteed to be consistent in FPU emulation, by definition.
> 
> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
> ---
> Changes from v1:
> 
> - also fix PTRACE_SETFPREGS (thanks, Paul!).
> 
> Paul, Ezequiel --
> 
>  Can you verify this change addresses the problems you saw?
> 

Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>

> [Ralf, this is another 4.1 material, please push it to Linus ASAP, once 
> this has been confirmed to DTRT.]
> 
>  Thanks,
> 
>   Maciej
> 
> linux-mips-emu-fcsr-isa-fix.diff
> Index: linux-org-test/arch/mips/include/asm/elf.h
> ===================================================================
> --- linux-org-test.orig/arch/mips/include/asm/elf.h	2015-05-06 23:20:51.946503000 +0100
> +++ linux-org-test/arch/mips/include/asm/elf.h	2015-05-12 14:37:14.169350000 +0100
> @@ -304,7 +304,7 @@ do {									\
>  									\
>  	current->thread.abi = &mips_abi;				\
>  									\
> -	current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31;		\
> +	current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31;		\
>  } while (0)
>  
>  #endif /* CONFIG_32BIT */
> @@ -366,7 +366,7 @@ do {									\
>  	else								\
>  		current->thread.abi = &mips_abi;			\
>  									\
> -	current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31;		\
> +	current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31;		\
>  									\
>  	p = personality(current->personality);				\
>  	if (p != PER_LINUX32 && p != PER_LINUX)				\
> Index: linux-org-test/arch/mips/kernel/ptrace.c
> ===================================================================
> --- linux-org-test.orig/arch/mips/kernel/ptrace.c	2015-04-28 14:52:04.000000000 +0100
> +++ linux-org-test/arch/mips/kernel/ptrace.c	2015-05-12 15:12:03.511002000 +0100
> @@ -176,7 +176,7 @@ int ptrace_setfpregs(struct task_struct 
>  
>  	__get_user(value, data + 64);
>  	fcr31 = child->thread.fpu.fcr31;
> -	mask = current_cpu_data.fpu_msk31;
> +	mask = boot_cpu_data.fpu_msk31;
>  	child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
>  
>  	/* FIR may not be written.  */
> Index: linux-org-test/arch/mips/math-emu/cp1emu.c
> ===================================================================
> --- linux-org-test.orig/arch/mips/math-emu/cp1emu.c	2015-04-28 14:52:04.000000000 +0100
> +++ linux-org-test/arch/mips/math-emu/cp1emu.c	2015-05-12 14:41:06.308256000 +0100
> @@ -889,7 +889,7 @@ static inline void cop1_cfc(struct pt_re
>  		break;
>  
>  	case FPCREG_RID:
> -		value = current_cpu_data.fpu_id;
> +		value = boot_cpu_data.fpu_id;
>  		break;
>  
>  	default:
> @@ -921,7 +921,7 @@ static inline void cop1_ctc(struct pt_re
>  			 (void *)xcp->cp0_epc, MIPSInst_RT(ir), value);
>  
>  		/* Preserve read-only bits.  */
> -		mask = current_cpu_data.fpu_msk31;
> +		mask = boot_cpu_data.fpu_msk31;
>  		fcr31 = (value & ~mask) | (fcr31 & mask);
>  		break;
>  
> 

-- 
Ezequiel

  reply	other threads:[~2015-05-12 17:31 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-12 14:20 [PATCH v2] MIPS: Fix a preemption issue with thread's FPU defaults Maciej W. Rozycki
2015-05-12 17:28 ` Ezequiel Garcia [this message]
2015-05-12 17:28   ` Ezequiel Garcia
2015-05-12 17:34   ` Paul Martin
2015-05-12 21:14 ` Ralf Baechle
2015-05-12 22:35   ` Maciej W. Rozycki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55523837.5040207@imgtec.com \
    --to=ezequiel.garcia@imgtec.com \
    --cc=Markos.Chandras@imgtec.com \
    --cc=james.hogan@imgtec.com \
    --cc=linux-mips@linux-mips.org \
    --cc=macro@linux-mips.org \
    --cc=paul.martin@codethink.co.uk \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.