* [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux
@ 2015-05-18 5:37 Peng Fan
2015-05-18 5:37 ` [U-Boot] [PATCH] pmic: pfuze100 fix typo Peng Fan
2015-05-19 13:20 ` [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux Stefano Babic
0 siblings, 2 replies; 4+ messages in thread
From: Peng Fan @ 2015-05-18 5:37 UTC (permalink / raw)
To: u-boot
Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise
we will get erros when doing i2c operations.
error log like the following:
"
wait_for_sr_state: failed sr=81 cr=a0 state=2020
i2c_init_transfer: failed for chip 0xb retry=1
"
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
---
arch/arm/include/asm/arch-mx6/mx6sx_pins.h | 40 +++++++++++++++---------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/mx6sx_pins.h b/arch/arm/include/asm/arch-mx6/mx6sx_pins.h
index 7c6c1e8..5dd9a50 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sx_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sx_pins.h
@@ -146,7 +146,7 @@ enum {
MX6_PAD_CSI_DATA00__CSI1_DATA_2 = IOMUX_PAD(0x0394, 0x004C, 0, 0x06A8, 0, 0),
MX6_PAD_CSI_DATA00__ESAI_TX_CLK = IOMUX_PAD(0x0394, 0x004C, 1, 0x078C, 1, 0),
MX6_PAD_CSI_DATA00__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0394, 0x004C, 2, 0x0684, 1, 0),
- MX6_PAD_CSI_DATA00__I2C1_SCL = IOMUX_PAD(0x0394, 0x004C, 3, 0x07A8, 0, 0),
+ MX6_PAD_CSI_DATA00__I2C1_SCL = IOMUX_PAD(0x0394, 0x004C, IOMUX_CONFIG_SION | 3, 0x07A8, 0, 0),
MX6_PAD_CSI_DATA00__UART6_RI_B = IOMUX_PAD(0x0394, 0x004C, 4, 0x0000, 0, 0),
MX6_PAD_CSI_DATA00__GPIO1_IO_14 = IOMUX_PAD(0x0394, 0x004C, 5, 0x0000, 0, 0),
MX6_PAD_CSI_DATA00__WEIM_DATA_23 = IOMUX_PAD(0x0394, 0x004C, 6, 0x0000, 0, 0),
@@ -157,7 +157,7 @@ enum {
MX6_PAD_CSI_DATA01__CSI1_DATA_3 = IOMUX_PAD(0x0398, 0x0050, 0, 0x06AC, 0, 0),
MX6_PAD_CSI_DATA01__ESAI_TX_FS = IOMUX_PAD(0x0398, 0x0050, 1, 0x077C, 1, 0),
MX6_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x0398, 0x0050, 2, 0x0688, 1, 0),
- MX6_PAD_CSI_DATA01__I2C1_SDA = IOMUX_PAD(0x0398, 0x0050, 3, 0x07AC, 0, 0),
+ MX6_PAD_CSI_DATA01__I2C1_SDA = IOMUX_PAD(0x0398, 0x0050, IOMUX_CONFIG_SION | 3, 0x07AC, 0, 0),
MX6_PAD_CSI_DATA01__UART6_DSR_B = IOMUX_PAD(0x0398, 0x0050, 4, 0x0000, 0, 0),
MX6_PAD_CSI_DATA01__GPIO1_IO_15 = IOMUX_PAD(0x0398, 0x0050, 5, 0x0000, 0, 0),
MX6_PAD_CSI_DATA01__WEIM_DATA_22 = IOMUX_PAD(0x0398, 0x0050, 6, 0x0000, 0, 0),
@@ -211,7 +211,7 @@ enum {
MX6_PAD_CSI_DATA06__CSI1_DATA_8 = IOMUX_PAD(0x03AC, 0x0064, 0, 0x06C0, 0, 0),
MX6_PAD_CSI_DATA06__ESAI_TX2_RX3 = IOMUX_PAD(0x03AC, 0x0064, 1, 0x0798, 1, 0),
- MX6_PAD_CSI_DATA06__I2C4_SCL = IOMUX_PAD(0x03AC, 0x0064, 2, 0x07C0, 2, 0),
+ MX6_PAD_CSI_DATA06__I2C4_SCL = IOMUX_PAD(0x03AC, 0x0064, IOMUX_CONFIG_SION | 2, 0x07C0, 2, 0),
MX6_PAD_CSI_DATA06__KPP_COL_7 = IOMUX_PAD(0x03AC, 0x0064, 3, 0x07D0, 0, 0),
MX6_PAD_CSI_DATA06__UART6_RTS_B = IOMUX_PAD(0x03AC, 0x0064, 4, 0x0854, 0, 0),
MX6_PAD_CSI_DATA06__GPIO1_IO_20 = IOMUX_PAD(0x03AC, 0x0064, 5, 0x0000, 0, 0),
@@ -222,7 +222,7 @@ enum {
MX6_PAD_CSI_DATA07__CSI1_DATA_9 = IOMUX_PAD(0x03B0, 0x0068, 0, 0x06C4, 0, 0),
MX6_PAD_CSI_DATA07__ESAI_TX3_RX2 = IOMUX_PAD(0x03B0, 0x0068, 1, 0x079C, 1, 0),
- MX6_PAD_CSI_DATA07__I2C4_SDA = IOMUX_PAD(0x03B0, 0x0068, 2, 0x07C4, 2, 0),
+ MX6_PAD_CSI_DATA07__I2C4_SDA = IOMUX_PAD(0x03B0, 0x0068, IOMUX_CONFIG_SION | 2, 0x07C4, 2, 0),
MX6_PAD_CSI_DATA07__KPP_ROW_7 = IOMUX_PAD(0x03B0, 0x0068, 3, 0x07DC, 0, 0),
MX6_PAD_CSI_DATA07__UART6_CTS_B = IOMUX_PAD(0x03B0, 0x0068, 4, 0x0854, 1, 0),
MX6_PAD_CSI_DATA07__GPIO1_IO_21 = IOMUX_PAD(0x03B0, 0x0068, 5, 0x0000, 0, 0),
@@ -361,7 +361,7 @@ enum {
MX6_PAD_ENET2_RX_CLK__ENET2_RX_CLK = IOMUX_PAD(0x03E4, 0x009C, 0, 0x0774, 0, 0),
MX6_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M = IOMUX_PAD(0x03E4, 0x009C, 1, 0x0000, 0, 0),
- MX6_PAD_ENET2_RX_CLK__I2C3_SCL = IOMUX_PAD(0x03E4, 0x009C, 2, 0x07B8, 1, 0),
+ MX6_PAD_ENET2_RX_CLK__I2C3_SCL = IOMUX_PAD(0x03E4, 0x009C, IOMUX_CONFIG_SION | 2, 0x07B8, 1, 0),
MX6_PAD_ENET2_RX_CLK__UART1_RTS_B = IOMUX_PAD(0x03E4, 0x009C, 3, 0x082C, 2, 0),
MX6_PAD_ENET2_RX_CLK__MLB_DATA = IOMUX_PAD(0x03E4, 0x009C, 4, 0x07EC, 1, 0),
MX6_PAD_ENET2_RX_CLK__GPIO2_IO_8 = IOMUX_PAD(0x03E4, 0x009C, 5, 0x0000, 0, 0),
@@ -372,7 +372,7 @@ enum {
MX6_PAD_ENET2_TX_CLK__ENET2_TX_CLK = IOMUX_PAD(0x03E8, 0x00A0, 0, 0x0000, 0, 0),
MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 = IOMUX_PAD(0x03E8, 0x00A0, 1, 0x076C, 1, 0),
- MX6_PAD_ENET2_TX_CLK__I2C3_SDA = IOMUX_PAD(0x03E8, 0x00A0, 2, 0x07BC, 1, 0),
+ MX6_PAD_ENET2_TX_CLK__I2C3_SDA = IOMUX_PAD(0x03E8, 0x00A0, IOMUX_CONFIG_SION | 2, 0x07BC, 1, 0),
MX6_PAD_ENET2_TX_CLK__UART1_CTS_B = IOMUX_PAD(0x03E8, 0x00A0, 3, 0x082C, 3, 0),
MX6_PAD_ENET2_TX_CLK__MLB_CLK = IOMUX_PAD(0x03E8, 0x00A0, 4, 0x07E8, 1, 0),
MX6_PAD_ENET2_TX_CLK__GPIO2_IO_9 = IOMUX_PAD(0x03E8, 0x00A0, 5, 0x0000, 0, 0),
@@ -420,7 +420,7 @@ enum {
MX6_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x03FC, 0x00B4, 0, 0x0000, 0, 0),
MX6_PAD_KEY_COL4__ENET2_MDC = IOMUX_PAD(0x03FC, 0x00B4, 1, 0x0000, 0, 0),
- MX6_PAD_KEY_COL4__I2C3_SCL = IOMUX_PAD(0x03FC, 0x00B4, 2, 0x07B8, 2, 0),
+ MX6_PAD_KEY_COL4__I2C3_SCL = IOMUX_PAD(0x03FC, 0x00B4, IOMUX_CONFIG_SION | 2, 0x07B8, 2, 0),
MX6_PAD_KEY_COL4__USDHC2_LCTL = IOMUX_PAD(0x03FC, 0x00B4, 3, 0x0000, 0, 0),
MX6_PAD_KEY_COL4__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03FC, 0x00B4, 4, 0x0664, 0, 0),
MX6_PAD_KEY_COL4__GPIO2_IO_14 = IOMUX_PAD(0x03FC, 0x00B4, 5, 0x0000, 0, 0),
@@ -467,7 +467,7 @@ enum {
MX6_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x0410, 0x00C8, 0, 0x0000, 0, 0),
MX6_PAD_KEY_ROW4__ENET2_MDIO = IOMUX_PAD(0x0410, 0x00C8, 1, 0x0770, 3, 0),
- MX6_PAD_KEY_ROW4__I2C3_SDA = IOMUX_PAD(0x0410, 0x00C8, 2, 0x07BC, 2, 0),
+ MX6_PAD_KEY_ROW4__I2C3_SDA = IOMUX_PAD(0x0410, 0x00C8, IOMUX_CONFIG_SION | 2, 0x07BC, 2, 0),
MX6_PAD_KEY_ROW4__USDHC1_LCTL = IOMUX_PAD(0x0410, 0x00C8, 3, 0x0000, 0, 0),
MX6_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x0410, 0x00C8, 4, 0x0668, 0, 0),
MX6_PAD_KEY_ROW4__GPIO2_IO_19 = IOMUX_PAD(0x0410, 0x00C8, 5, 0x0000, 0, 0),
@@ -780,7 +780,7 @@ enum {
MX6_PAD_LCD1_VSYNC__MMDC_DEBUG_3 = IOMUX_PAD(0x0484, 0x013C, 9, 0x0000, 0, 0),
MX6_PAD_NAND_ALE__RAWNAND_ALE = IOMUX_PAD(0x0488, 0x0140, 0, 0x0000, 0, 0),
- MX6_PAD_NAND_ALE__I2C3_SDA = IOMUX_PAD(0x0488, 0x0140, 1, 0x07BC, 0, 0),
+ MX6_PAD_NAND_ALE__I2C3_SDA = IOMUX_PAD(0x0488, 0x0140, IOMUX_CONFIG_SION | 1, 0x07BC, 0, 0),
MX6_PAD_NAND_ALE__QSPI2_A_SS0_B = IOMUX_PAD(0x0488, 0x0140, 2, 0x0000, 0, 0),
MX6_PAD_NAND_ALE__ECSPI2_SS0 = IOMUX_PAD(0x0488, 0x0140, 3, 0x072C, 0, 0),
MX6_PAD_NAND_ALE__ESAI_TX3_RX2 = IOMUX_PAD(0x0488, 0x0140, 4, 0x079C, 0, 0),
@@ -813,7 +813,7 @@ enum {
MX6_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0490, 0x0148, 9, 0x0000, 0, 0),
MX6_PAD_NAND_CLE__RAWNAND_CLE = IOMUX_PAD(0x0494, 0x014C, 0, 0x0000, 0, 0),
- MX6_PAD_NAND_CLE__I2C3_SCL = IOMUX_PAD(0x0494, 0x014C, 1, 0x07B8, 0, 0),
+ MX6_PAD_NAND_CLE__I2C3_SCL = IOMUX_PAD(0x0494, 0x014C, IOMUX_CONFIG_SION | 1, 0x07B8, 0, 0),
MX6_PAD_NAND_CLE__QSPI2_A_SCLK = IOMUX_PAD(0x0494, 0x014C, 2, 0x0000, 0, 0),
MX6_PAD_NAND_CLE__ECSPI2_SCLK = IOMUX_PAD(0x0494, 0x014C, 3, 0x0720, 0, 0),
MX6_PAD_NAND_CLE__ESAI_TX2_RX3 = IOMUX_PAD(0x0494, 0x014C, 4, 0x0798, 0, 0),
@@ -1054,7 +1054,7 @@ enum {
MX6_PAD_QSPI1B_DATA1__SIM_M_HADDR_8 = IOMUX_PAD(0x04EC, 0x01A4, 7, 0x0000, 0, 0),
MX6_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 = IOMUX_PAD(0x04F0, 0x01A8, 0, 0x0000, 0, 0),
- MX6_PAD_QSPI1B_DATA2__I2C2_SDA = IOMUX_PAD(0x04F0, 0x01A8, 1, 0x07B4, 2, 0),
+ MX6_PAD_QSPI1B_DATA2__I2C2_SDA = IOMUX_PAD(0x04F0, 0x01A8, IOMUX_CONFIG_SION | 1, 0x07B4, 2, 0),
MX6_PAD_QSPI1B_DATA2__ECSPI5_RDY = IOMUX_PAD(0x04F0, 0x01A8, 2, 0x0000, 0, 0),
MX6_PAD_QSPI1B_DATA2__ESAI_TX5_RX0 = IOMUX_PAD(0x04F0, 0x01A8, 3, 0x07A4, 2, 0),
MX6_PAD_QSPI1B_DATA2__CSI1_DATA_20 = IOMUX_PAD(0x04F0, 0x01A8, 4, 0x06EC, 1, 0),
@@ -1063,7 +1063,7 @@ enum {
MX6_PAD_QSPI1B_DATA2__SIM_M_HADDR_5 = IOMUX_PAD(0x04F0, 0x01A8, 7, 0x0000, 0, 0),
MX6_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 = IOMUX_PAD(0x04F4, 0x01AC, 0, 0x0000, 0, 0),
- MX6_PAD_QSPI1B_DATA3__I2C2_SCL = IOMUX_PAD(0x04F4, 0x01AC, 1, 0x07B0, 2, 0),
+ MX6_PAD_QSPI1B_DATA3__I2C2_SCL = IOMUX_PAD(0x04F4, 0x01AC, IOMUX_CONFIG_SION | 1, 0x07B0, 2, 0),
MX6_PAD_QSPI1B_DATA3__ECSPI5_SS3 = IOMUX_PAD(0x04F4, 0x01AC, 2, 0x0000, 0, 0),
MX6_PAD_QSPI1B_DATA3__ESAI_TX_FS = IOMUX_PAD(0x04F4, 0x01AC, 3, 0x077C, 2, 0),
MX6_PAD_QSPI1B_DATA3__CSI1_DATA_19 = IOMUX_PAD(0x04F4, 0x01AC, 4, 0x06E8, 1, 0),
@@ -1389,7 +1389,7 @@ enum {
MX6_PAD_SD2_DATA0__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0588, 0x0240, 1, 0x0674, 2, 0),
MX6_PAD_SD2_DATA0__KPP_ROW_7 = IOMUX_PAD(0x0588, 0x0240, 2, 0x07DC, 1, 0),
MX6_PAD_SD2_DATA0__PWM1_OUT = IOMUX_PAD(0x0588, 0x0240, 3, 0x0000, 0, 0),
- MX6_PAD_SD2_DATA0__I2C4_SDA = IOMUX_PAD(0x0588, 0x0240, 4, 0x07C4, 3, 0),
+ MX6_PAD_SD2_DATA0__I2C4_SDA = IOMUX_PAD(0x0588, 0x0240, IOMUX_CONFIG_SION | 4, 0x07C4, 3, 0),
MX6_PAD_SD2_DATA0__GPIO6_IO_8 = IOMUX_PAD(0x0588, 0x0240, 5, 0x0000, 0, 0),
MX6_PAD_SD2_DATA0__ECSPI4_SS3 = IOMUX_PAD(0x0588, 0x0240, 6, 0x0000, 0, 0),
MX6_PAD_SD2_DATA0__UART4_RX = IOMUX_PAD(0x0588, 0x0240, 7, 0x0848, 4, 0),
@@ -1400,7 +1400,7 @@ enum {
MX6_PAD_SD2_DATA1__AUDMUX_AUD6_TXC = IOMUX_PAD(0x058C, 0x0244, 1, 0x0684, 2, 0),
MX6_PAD_SD2_DATA1__KPP_COL_7 = IOMUX_PAD(0x058C, 0x0244, 2, 0x07D0, 1, 0),
MX6_PAD_SD2_DATA1__PWM2_OUT = IOMUX_PAD(0x058C, 0x0244, 3, 0x0000, 0, 0),
- MX6_PAD_SD2_DATA1__I2C4_SCL = IOMUX_PAD(0x058C, 0x0244, 4, 0x07C0, 3, 0),
+ MX6_PAD_SD2_DATA1__I2C4_SCL = IOMUX_PAD(0x058C, 0x0244, IOMUX_CONFIG_SION | 4, 0x07C0, 3, 0),
MX6_PAD_SD2_DATA1__GPIO6_IO_9 = IOMUX_PAD(0x058C, 0x0244, 5, 0x0000, 0, 0),
MX6_PAD_SD2_DATA1__ECSPI4_SS2 = IOMUX_PAD(0x058C, 0x0244, 6, 0x0000, 0, 0),
MX6_PAD_SD2_DATA1__UART4_TX = IOMUX_PAD(0x058C, 0x0244, 7, 0x0848, 5, 0),
@@ -1450,7 +1450,7 @@ enum {
MX6_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4 = IOMUX_PAD(0x059C, 0x0254, 9, 0x0000, 0, 0),
MX6_PAD_SD3_DATA0__USDHC3_DATA0 = IOMUX_PAD(0x05A0, 0x0258, 0, 0x0000, 0, 0),
- MX6_PAD_SD3_DATA0__I2C4_SCL = IOMUX_PAD(0x05A0, 0x0258, 1, 0x07C0, 0, 0),
+ MX6_PAD_SD3_DATA0__I2C4_SCL = IOMUX_PAD(0x05A0, 0x0258, IOMUX_CONFIG_SION | 1, 0x07C0, 0, 0),
MX6_PAD_SD3_DATA0__ECSPI2_SS1 = IOMUX_PAD(0x05A0, 0x0258, 2, 0x0000, 0, 0),
MX6_PAD_SD3_DATA0__AUDMUX_AUD6_RXD = IOMUX_PAD(0x05A0, 0x0258, 3, 0x0674, 0, 0),
MX6_PAD_SD3_DATA0__LCDIF2_DATA_1 = IOMUX_PAD(0x05A0, 0x0258, 4, 0x0000, 0, 0),
@@ -1461,7 +1461,7 @@ enum {
MX6_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0 = IOMUX_PAD(0x05A0, 0x0258, 9, 0x0000, 0, 0),
MX6_PAD_SD3_DATA1__USDHC3_DATA1 = IOMUX_PAD(0x05A4, 0x025C, 0, 0x0000, 0, 0),
- MX6_PAD_SD3_DATA1__I2C4_SDA = IOMUX_PAD(0x05A4, 0x025C, 1, 0x07C4, 0, 0),
+ MX6_PAD_SD3_DATA1__I2C4_SDA = IOMUX_PAD(0x05A4, 0x025C, IOMUX_CONFIG_SION | 1, 0x07C4, 0, 0),
MX6_PAD_SD3_DATA1__ECSPI2_SS2 = IOMUX_PAD(0x05A4, 0x025C, 2, 0x0000, 0, 0),
MX6_PAD_SD3_DATA1__AUDMUX_AUD6_TXC = IOMUX_PAD(0x05A4, 0x025C, 3, 0x0684, 0, 0),
MX6_PAD_SD3_DATA1__LCDIF2_DATA_0 = IOMUX_PAD(0x05A4, 0x025C, 4, 0x0000, 0, 0),
@@ -1583,7 +1583,7 @@ enum {
MX6_PAD_SD4_DATA2__USDHC4_DATA2 = IOMUX_PAD(0x05D0, 0x0288, 0, 0x0000, 0, 0),
MX6_PAD_SD4_DATA2__RAWNAND_DATA12 = IOMUX_PAD(0x05D0, 0x0288, 1, 0x0000, 0, 0),
- MX6_PAD_SD4_DATA2__I2C2_SDA = IOMUX_PAD(0x05D0, 0x0288, 2, 0x07B4, 0, 0),
+ MX6_PAD_SD4_DATA2__I2C2_SDA = IOMUX_PAD(0x05D0, 0x0288, IOMUX_CONFIG_SION | 2, 0x07B4, 0, 0),
MX6_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x05D0, 0x0288, 3, 0x0640, 0, 0),
MX6_PAD_SD4_DATA2__LCDIF2_DATA_10 = IOMUX_PAD(0x05D0, 0x0288, 4, 0x0000, 0, 0),
MX6_PAD_SD4_DATA2__GPIO6_IO_16 = IOMUX_PAD(0x05D0, 0x0288, 5, 0x0000, 0, 0),
@@ -1594,7 +1594,7 @@ enum {
MX6_PAD_SD4_DATA3__USDHC4_DATA3 = IOMUX_PAD(0x05D4, 0x028C, 0, 0x0000, 0, 0),
MX6_PAD_SD4_DATA3__RAWNAND_DATA13 = IOMUX_PAD(0x05D4, 0x028C, 1, 0x0000, 0, 0),
- MX6_PAD_SD4_DATA3__I2C2_SCL = IOMUX_PAD(0x05D4, 0x028C, 2, 0x07B0, 0, 0),
+ MX6_PAD_SD4_DATA3__I2C2_SCL = IOMUX_PAD(0x05D4, 0x028C, IOMUX_CONFIG_SION | 2, 0x07B0, 0, 0),
MX6_PAD_SD4_DATA3__AUDMUX_AUD3_TXD = IOMUX_PAD(0x05D4, 0x028C, 3, 0x0630, 0, 0),
MX6_PAD_SD4_DATA3__LCDIF2_DATA_9 = IOMUX_PAD(0x05D4, 0x028C, 4, 0x0000, 0, 0),
MX6_PAD_SD4_DATA3__GPIO6_IO_17 = IOMUX_PAD(0x05D4, 0x028C, 5, 0x0000, 0, 0),
@@ -1661,14 +1661,14 @@ enum {
MX6_PAD_USB_H_DATA__USB_H_DATA = IOMUX_PAD(0x05EC, 0x02A4, 0, 0x0000, 0, 0),
MX6_PAD_USB_H_DATA__PWM2_OUT = IOMUX_PAD(0x05EC, 0x02A4, 1, 0x0000, 0, 0),
MX6_PAD_USB_H_DATA__ANATOP_24M_OUT = IOMUX_PAD(0x05EC, 0x02A4, 2, 0x0000, 0, 0),
- MX6_PAD_USB_H_DATA__I2C4_SDA = IOMUX_PAD(0x05EC, 0x02A4, 3, 0x07C4, 1, 0),
+ MX6_PAD_USB_H_DATA__I2C4_SDA = IOMUX_PAD(0x05EC, 0x02A4, IOMUX_CONFIG_SION | 3, 0x07C4, 1, 0),
MX6_PAD_USB_H_DATA__WDOG3_WDOG_B = IOMUX_PAD(0x05EC, 0x02A4, 4, 0x0000, 0, 0),
MX6_PAD_USB_H_DATA__GPIO7_IO_10 = IOMUX_PAD(0x05EC, 0x02A4, 5, 0x0000, 0, 0),
MX6_PAD_USB_H_STROBE__USB_H_STROBE = IOMUX_PAD(0x05F0, 0x02A8, 0, 0x0000, 0, 0),
MX6_PAD_USB_H_STROBE__PWM1_OUT = IOMUX_PAD(0x05F0, 0x02A8, 1, 0x0000, 0, 0),
MX6_PAD_USB_H_STROBE__ANATOP_32K_OUT = IOMUX_PAD(0x05F0, 0x02A8, 2, 0x0000, 0, 0),
- MX6_PAD_USB_H_STROBE__I2C4_SCL = IOMUX_PAD(0x05F0, 0x02A8, 3, 0x07C0, 1, 0),
+ MX6_PAD_USB_H_STROBE__I2C4_SCL = IOMUX_PAD(0x05F0, 0x02A8, IOMUX_CONFIG_SION | 3, 0x07C0, 1, 0),
MX6_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB = IOMUX_PAD(0x05F0, 0x02A8, 4, 0x0000, 0, 0),
MX6_PAD_USB_H_STROBE__GPIO7_IO_11 = IOMUX_PAD(0x05F0, 0x02A8, 5, 0x0000, 0, 0),
};
--
1.8.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] pmic: pfuze100 fix typo
2015-05-18 5:37 [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux Peng Fan
@ 2015-05-18 5:37 ` Peng Fan
2015-05-19 13:20 ` Stefano Babic
2015-05-19 13:20 ` [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux Stefano Babic
1 sibling, 1 reply; 4+ messages in thread
From: Peng Fan @ 2015-05-18 5:37 UTC (permalink / raw)
To: u-boot
Change PUZE_100_SW1ABCONF to PFUZE100_SW1ABCONF
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
---
board/freescale/common/pfuze.c | 4 ++--
include/power/pfuze100_pmic.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c
index 4980bf7..d6a209e 100644
--- a/board/freescale/common/pfuze.c
+++ b/board/freescale/common/pfuze.c
@@ -71,10 +71,10 @@ struct pmic *pfuze_common_init(unsigned char i2cbus)
pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
- pmic_reg_read(p, PUZE_100_SW1ABCONF, ®);
+ pmic_reg_read(p, PFUZE100_SW1ABCONF, ®);
reg &= ~SW1xCONF_DVSSPEED_MASK;
reg |= SW1xCONF_DVSSPEED_4US;
- pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+ pmic_reg_write(p, PFUZE100_SW1ABCONF, reg);
/* Set SW1C standby voltage to 0.975V */
pmic_reg_read(p, PFUZE100_SW1CSTBY, ®);
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 8e7a22d..57b9ca9 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -18,7 +18,7 @@ enum {
PFUZE100_SW1ABSTBY = 0x21,
PFUZE100_SW1ABOFF = 0x22,
PFUZE100_SW1ABMODE = 0x23,
- PUZE_100_SW1ABCONF = 0x24,
+ PFUZE100_SW1ABCONF = 0x24,
PFUZE100_SW1CVOL = 0x2e,
PFUZE100_SW1CSTBY = 0x2f,
PFUZE100_SW1COFF = 0x30,
--
1.8.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux
2015-05-18 5:37 [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux Peng Fan
2015-05-18 5:37 ` [U-Boot] [PATCH] pmic: pfuze100 fix typo Peng Fan
@ 2015-05-19 13:20 ` Stefano Babic
1 sibling, 0 replies; 4+ messages in thread
From: Stefano Babic @ 2015-05-19 13:20 UTC (permalink / raw)
To: u-boot
Hi Peng,
On 18/05/2015 07:37, Peng Fan wrote:
> Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise
> we will get erros when doing i2c operations.
> error log like the following:
> "
> wait_for_sr_state: failed sr=81 cr=a0 state=2020
> i2c_init_transfer: failed for chip 0xb retry=1
> "
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] pmic: pfuze100 fix typo
2015-05-18 5:37 ` [U-Boot] [PATCH] pmic: pfuze100 fix typo Peng Fan
@ 2015-05-19 13:20 ` Stefano Babic
0 siblings, 0 replies; 4+ messages in thread
From: Stefano Babic @ 2015-05-19 13:20 UTC (permalink / raw)
To: u-boot
On 18/05/2015 07:37, Peng Fan wrote:
> Change PUZE_100_SW1ABCONF to PFUZE100_SW1ABCONF
>
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-05-19 13:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-18 5:37 [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux Peng Fan
2015-05-18 5:37 ` [U-Boot] [PATCH] pmic: pfuze100 fix typo Peng Fan
2015-05-19 13:20 ` Stefano Babic
2015-05-19 13:20 ` [U-Boot] [PATCH] imx: mx6sx enable SION for i2c pin mux Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.