From: poma <pomidorabelisima@gmail.com>
To: Antti Palosaari <crope@iki.fi>,
linux-media <linux-media@vger.kernel.org>
Cc: Michael Krufky <mkrufky@linuxtv.org>,
Manu Abraham <abraham.manu@gmail.com>
Subject: Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x
Date: Thu, 21 May 2015 23:23:59 +0200 [thread overview]
Message-ID: <555E4CEF.4000901@gmail.com> (raw)
In-Reply-To: <555A3A48.2010002@gmail.com>
On 18.05.2015 21:15, poma wrote:
> On 17.05.2015 01:07, Antti Palosaari wrote:
...
>> try that
>> http://git.linuxtv.org/cgit.cgi/anttip/media_tree.git/commit/?h=af9015_mxl5007t_1
>>
>> Antti
>>
>
> Thanks.
> For now, I have noticed, unlike before the EIT program data are updated in full and promptly.
>
> I'll be back in a week.
>
>
No need to continue to test this patch because this is repeated:
BOOT from S5/Soft Off:
[ 1.007886] usb 1-2: Product: DVB-T 2
[ 1.032430] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 1.035255] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5
[ 1.089852] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1
[ 13.353105] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 13.557671] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 13.558315] DVB: registering new adapter (Afatech AF9015 reference design)
[ 13.726582] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 13.814649] mxl5007t 13-00c0: creating new instance
[ 13.817588] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 13.820460] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 13.824594] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 13.825234] DVB: registering new adapter (Afatech AF9015 reference design)
[ 14.040582] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 14.040921] mxl5007t 13-00c0: attaching existing instance
[ 14.043201] usb 1-2: dvb_usb_af9015: command failed=1
[ 14.043429] mxl5007t_read_reg: 505: failed!
[ 14.043656] mxl5007t_get_chip_id: error -121 on line 824
[ 14.043880] mxl5007t_get_chip_id: unable to identify device @ 13-00c0
[ 14.044698] usb 1-2: dvb_usb_af9015: command failed=1
[ 14.044911] mxl5007t_soft_reset: 527: failed!
[ 14.046841] mxl5007t_attach: error -121 on line 914
[ 14.051434] usbcore: registered new interface driver dvb_usb_af9015
$ ls /dev/dvb/
ls: cannot access /dev/dvb/: No such file or directory
# modprobe -rv dvb_usb_af9015 mxl5007t
rmmod dvb_usb_af9015
rmmod dvb_usb_v2
rmmod rc_core
rmmod dvb_core
rmmod mxl5007t
# modprobe -v dvb_usb_af9015
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/rc/rc-core.ko.xz
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/dvb-core/dvb-core.ko.xz
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko.xz
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-af9015.ko.xz
[ 2101.659729] usbcore: deregistering interface driver dvb_usb_af9015
[ 2117.056136] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 2117.265520] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2117.265607] DVB: registering new adapter (Afatech AF9015 reference design)
[ 2117.268348] i2c i2c-13: af9013: firmware version 5.1.0.0
[ 2117.274958] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 2117.280031] mxl5007t 13-00c0: creating new instance
[ 2117.281700] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 2117.284211] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 2117.287208] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2117.287245] DVB: registering new adapter (Afatech AF9015 reference design)
[ 2117.493132] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state
[ 2117.496887] i2c i2c-13: af9013: firmware version 5.1.0.0
[ 2117.504373] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 2117.504664] mxl5007t 13-00c0: attaching existing instance
[ 2117.506848] usb 1-2: dvb_usb_af9015: command failed=1
[ 2117.506858] mxl5007t_read_reg: 505: failed!
[ 2117.506864] mxl5007t_get_chip_id: error -121 on line 824
[ 2117.506868] mxl5007t_get_chip_id: unable to identify device @ 13-00c0
[ 2117.507344] usb 1-2: dvb_usb_af9015: command failed=1
[ 2117.507350] mxl5007t_soft_reset: 527: failed!
[ 2117.509007] mxl5007t_attach: error -121 on line 914
[ 2117.511150] usbcore: registered new interface driver dvb_usb_af9015
$ ls /dev/dvb/
ls: cannot access /dev/dvb/: No such file or directory
REBOOT:
[ 1.049265] usb 1-2: Product: DVB-T 2
[ 1.067810] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 1.068145] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5
[ 1.118889] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1
[ 12.023590] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 12.225419] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 12.225524] DVB: registering new adapter (Afatech AF9015 reference design)
[ 12.238958] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 12.261783] mxl5007t 13-00c0: creating new instance
[ 12.265081] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 12.267236] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 12.270335] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 12.270376] DVB: registering new adapter (Afatech AF9015 reference design)
[ 12.484761] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 12.485016] mxl5007t 13-00c0: attaching existing instance
[ 12.487225] usb 1-2: dvb_usb_af9015: command failed=1
[ 12.487251] mxl5007t_read_reg: 505: failed!
[ 12.487266] mxl5007t_get_chip_id: error -121 on line 824
[ 12.487281] mxl5007t_get_chip_id: unable to identify device @ 13-00c0
[ 12.487716] usb 1-2: dvb_usb_af9015: command failed=1
[ 12.487753] mxl5007t_soft_reset: 527: failed!
[ 12.489363] mxl5007t_attach: error -121 on line 914
[ 12.490589] usbcore: registered new interface driver dvb_usb_af9015
$ ls /dev/dvb
ls: cannot access /dev/dvb: No such file or directory
$ uname -r
4.0.4-502.fc21.x86_64
next prev parent reply other threads:[~2015-05-21 21:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 10:20 dvb_usb_af9015: command failed=1 - stable: 4.0.2 poma
2015-05-08 10:59 ` poma
2015-05-10 10:38 ` dvb_usb_af9015: command failed=1 >= 3.19.x poma
2015-05-10 22:25 ` dvb_usb_af9015: command failed=1 _ lsdvb " poma
2015-05-11 18:43 ` dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x poma
2015-05-12 14:11 ` Antti Palosaari
2015-05-13 3:56 ` poma
2015-05-16 23:07 ` Antti Palosaari
2015-05-18 19:15 ` poma
2015-05-21 21:23 ` poma [this message]
2015-05-26 12:24 ` poma
2015-07-02 23:02 ` poma
-- strict thread matches above, loose matches on Subject: below --
2015-07-06 20:17 Jose Alberto Reguero
2015-07-07 8:48 ` poma
2015-07-13 9:48 ` poma
2015-07-31 15:03 ` poma
[not found] ` <CAAZRmGym49dG6Jj-ZeKZmy0rgr4ozph7-ggjLoWtGOvT1m4oBA@mail.gmail.com>
2015-08-10 21:46 ` poma
2015-08-10 22:40 ` Antti Palosaari
2015-08-12 23:52 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=555E4CEF.4000901@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=abraham.manu@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mkrufky@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.