* [PULL] IIO new drivers etc for the 4.2 cycle round 2
@ 2015-05-24 16:05 Jonathan Cameron
2015-05-24 18:48 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2015-05-24 16:05 UTC (permalink / raw)
To: Greg KH; +Cc: linux-iio@vger.kernel.org
The following changes since commit 5ccca155675a5a2d491257a441306dd8547695c2:
Merge tag 'iio-for-v4.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next (2015-05-09 18:15:50 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-v4.2b
for you to fetch changes up to 884ca45613c47efe4b0b1238f6ee677d74fe3419:
iio: accel: Add support for Sensortek STK8BA50 (2015-05-23 12:57:11 +0100)
----------------------------------------------------------------
Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.
Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
ones.
Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
a hideously evolved function.
New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer. The accelerometer in the same package has been supported
for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.
Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
averaging. The ideal settings for these tend to be board design specific.
----------------------------------------------------------------
Antoine Tenart (2):
iio: adc: add support for Berlin
Documentation: bindings: document the Berlin ADC driver
Daniel Baluta (3):
iio: magnetometer: Add support for MEMSIC MMC35240 sensor
iio: magnetometer: mmc35240: Add PM sleep support
iio: magnetometer: Add ACPI support for MMC35240
Dmitry Eremin-Solenikov (1):
iio: add m62332 DAC driver
Fabio Estevam (6):
iio: accel: hid-sensor-accel-3d: Fix memory leak in probe()
iio: gyro: hid-sensor-gyro-3d: Fix memory leak in probe()
iio: light: hid-sensor-als.c: Fix memory leak in probe()
iio: orientation: hid-sensor-incl-3d: Fix memory leak in probe()
iio: orientation: hid-sensor-rotation: Fix memory leak in probe()
iio: pressure: hid-sensor-press: Fix memory leak in probe()
Gabriele Mazzotta (1):
iio: acpi: Add support for ACPI0008 Ambient Light Sensor
Geert Uytterhoeven (2):
iio: Allow compile test of GPIO consumers if !GPIOLIB
Staging: iio: Allow compile test of GPIO consumers if !GPIOLIB
Irina Tirdea (4):
iio: magn: Add support for BMC150 magnetometer
iio: magn: bmc150_magn: Add devicetree binding documentation
iio: core: Introduce IIO_CHAN_INFO_OVERSAMPLING_RATIO
iio: magn: bmc150_magn: add oversampling ratio
Jonathan Cameron (1):
iio:temp:mlx90614 trivial drop of unnecessary ret return from write_raw.
Krzysztof Kozlowski (9):
iio: hid-sensor-accel-3d: Constify platform_device_id
iio: adc: axp288: Constify platform_device_id
iio: hid-sensor-gyro-3d: Constify platform_device_id
iio: light: hid-sensor-als: Constify platform_device_id
iio: light: hid-sensor-prox: Constify platform_device_id
iio: hid-sensor-magn-3d: Constify platform_device_id
iio: hid-sensor-incl-3d: Constify platform_device_id
iio: hid-sensor-rotation: Constify platform_device_id
iio: hid-sensor-press: Constify platform_device_id
Kuppuswamy Sathyanarayanan (2):
iio: ltr501: Fix proximity threshold boundary check
iio: ltr501: Add light channel support
Lars-Peter Clausen (7):
iio: Replace printk in __iio_update_buffers with dev_dbg
iio: __iio_update_buffers: Slightly refactor scan mask memory management
iio: __iio_update_buffers: Perform request_update() only for new buffers
iio: Add I/Q modifiers
iio: __iio_update_buffers: Verify configuration before starting to apply it
iio: __iio_update_buffers: Split enable and disable path into helper functions
iio: __iio_update_buffers: Leave device in sane state on error
Linus Walleij (1):
iio: make tools more cross-compilation friendly
Martin Fuzzey (3):
iio: mma8452: Initialise before activating
iio: mma8452: Add access to registers via DebugFS
iio: core: add high pass filter attributes
Tiberiu Breana (4):
iio: light: Add support for Sensortek STK3310
iio: light: Add threshold interrupt support for STK3310
iio: accel: Add support for Sensortek STK8312
iio: accel: Add support for Sensortek STK8BA50
Tomasz Duszynski (1):
iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors
Urs Fässler (1):
iio:adc128s052: add support for adc122s021
Varka Bhadram (1):
imu: inv_mpu6050: adds device tree bindings
Vignesh R (1):
iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters
Vlad Dogaru (3):
iio: gyro: bmg160: remove redundant field
iio: gyro: bmg160: decouple buffer and triggers
iio: accel: bmc150: decouple buffer and triggers
Documentation/ABI/testing/sysfs-bus-iio | 88 ++
.../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 +
.../devicetree/bindings/iio/adc/ti-adc128s052.txt | 4 +-
.../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +
.../bindings/iio/magnetometer/bmc150_magn.txt | 22 +
.../bindings/input/touchscreen/ti-tsc-adc.txt | 24 +
drivers/iio/accel/Kconfig | 21 +
drivers/iio/accel/Makefile | 3 +
drivers/iio/accel/bmc150-accel.c | 55 +-
drivers/iio/accel/hid-sensor-accel-3d.c | 15 +-
drivers/iio/accel/mma8452.c | 62 +-
drivers/iio/accel/stk8312.c | 390 +++++++
drivers/iio/accel/stk8ba50.c | 302 ++++++
drivers/iio/adc/Kconfig | 11 +-
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/axp288_adc.c | 2 +-
drivers/iio/adc/berlin2-adc.c | 378 +++++++
drivers/iio/adc/ti-adc128s052.c | 30 +-
drivers/iio/adc/ti_am335x_adc.c | 54 +-
drivers/iio/dac/Kconfig | 10 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/m62332.c | 269 +++++
drivers/iio/gyro/bmg160.c | 67 +-
drivers/iio/gyro/hid-sensor-gyro-3d.c | 15 +-
drivers/iio/humidity/Kconfig | 2 +-
drivers/iio/industrialio-buffer.c | 328 +++---
drivers/iio/industrialio-core.c | 5 +
drivers/iio/industrialio-event.c | 2 +
drivers/iio/light/Kconfig | 34 +
drivers/iio/light/Makefile | 3 +
drivers/iio/light/acpi-als.c | 231 ++++
drivers/iio/light/bh1750.c | 334 ++++++
drivers/iio/light/hid-sensor-als.c | 14 +-
drivers/iio/light/hid-sensor-prox.c | 2 +-
drivers/iio/light/ltr501.c | 53 +-
drivers/iio/light/stk3310.c | 722 +++++++++++++
drivers/iio/magnetometer/Kconfig | 29 +-
drivers/iio/magnetometer/Makefile | 3 +
drivers/iio/magnetometer/bmc150_magn.c | 1109 ++++++++++++++++++++
drivers/iio/magnetometer/hid-sensor-magn-3d.c | 2 +-
drivers/iio/magnetometer/mmc35240.c | 512 +++++++++
drivers/iio/orientation/hid-sensor-incl-3d.c | 16 +-
drivers/iio/orientation/hid-sensor-rotation.c | 17 +-
drivers/iio/pressure/hid-sensor-press.c | 14 +-
drivers/iio/temperature/mlx90614.c | 4 +-
drivers/staging/iio/accel/Kconfig | 2 +-
drivers/staging/iio/adc/Kconfig | 6 +-
drivers/staging/iio/addac/Kconfig | 2 +-
drivers/staging/iio/resolver/Kconfig | 4 +-
include/linux/iio/iio.h | 2 +
include/linux/iio/types.h | 2 +
include/uapi/linux/iio/types.h | 2 +
tools/iio/Makefile | 4 +-
53 files changed, 5061 insertions(+), 259 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
create mode 100644 drivers/iio/accel/stk8312.c
create mode 100644 drivers/iio/accel/stk8ba50.c
create mode 100644 drivers/iio/adc/berlin2-adc.c
create mode 100644 drivers/iio/dac/m62332.c
create mode 100644 drivers/iio/light/acpi-als.c
create mode 100644 drivers/iio/light/bh1750.c
create mode 100644 drivers/iio/light/stk3310.c
create mode 100644 drivers/iio/magnetometer/bmc150_magn.c
create mode 100644 drivers/iio/magnetometer/mmc35240.c
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-05-24 18:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-05-24 16:05 [PULL] IIO new drivers etc for the 4.2 cycle round 2 Jonathan Cameron
2015-05-24 18:48 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.