Re: [PATCH] Remove unused functions from the driver file, bcmgenet.c

Re: [PATCH] Remove unused functions from the driver file, bcmgenet.c

[Florian Fainelli]

+Petri,

On 26/05/15 09:28, Nicholas Krause wrote:
> This removes the unused function,  bcmgenet_hfb_add_filter and
> the filter functions used within it due to either having no
> callers or their  only caller now removed from the file,
> bcmgent.c with the removal of the function, bgmgenet_add_filter.

I am fairly sure Petri has pending changes that will utilize this
function, so if we can keep the code around for a while, that would help.

> 
> Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
> ---
>  drivers/net/ethernet/broadcom/genet/bcmgenet.c | 122 -------------------------
>  1 file changed, 122 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index 6043734..0d5dea9 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -2451,128 +2451,6 @@ static void bcmgenet_enable_dma(struct bcmgenet_priv *priv, u32 dma_ctrl)
>  	bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
>  }
>  
> -static bool bcmgenet_hfb_is_filter_enabled(struct bcmgenet_priv *priv,
> -					   u32 f_index)
> -{
> -	u32 offset;
> -	u32 reg;
> -
> -	offset = HFB_FLT_ENABLE_V3PLUS + (f_index < 32) * sizeof(u32);
> -	reg = bcmgenet_hfb_reg_readl(priv, offset);
> -	return !!(reg & (1 << (f_index % 32)));
> -}
> -
> -static void bcmgenet_hfb_enable_filter(struct bcmgenet_priv *priv, u32 f_index)
> -{
> -	u32 offset;
> -	u32 reg;
> -
> -	offset = HFB_FLT_ENABLE_V3PLUS + (f_index < 32) * sizeof(u32);
> -	reg = bcmgenet_hfb_reg_readl(priv, offset);
> -	reg |= (1 << (f_index % 32));
> -	bcmgenet_hfb_reg_writel(priv, reg, offset);
> -}
> -
> -static void bcmgenet_hfb_set_filter_rx_queue_mapping(struct bcmgenet_priv *priv,
> -						     u32 f_index, u32 rx_queue)
> -{
> -	u32 offset;
> -	u32 reg;
> -
> -	offset = f_index / 8;
> -	reg = bcmgenet_rdma_readl(priv, DMA_INDEX2RING_0 + offset);
> -	reg &= ~(0xF << (4 * (f_index % 8)));
> -	reg |= ((rx_queue & 0xF) << (4 * (f_index % 8)));
> -	bcmgenet_rdma_writel(priv, reg, DMA_INDEX2RING_0 + offset);
> -}
> -
> -static void bcmgenet_hfb_set_filter_length(struct bcmgenet_priv *priv,
> -					   u32 f_index, u32 f_length)
> -{
> -	u32 offset;
> -	u32 reg;
> -
> -	offset = HFB_FLT_LEN_V3PLUS +
> -		 ((priv->hw_params->hfb_filter_cnt - 1 - f_index) / 4) *
> -		 sizeof(u32);
> -	reg = bcmgenet_hfb_reg_readl(priv, offset);
> -	reg &= ~(0xFF << (8 * (f_index % 4)));
> -	reg |= ((f_length & 0xFF) << (8 * (f_index % 4)));
> -	bcmgenet_hfb_reg_writel(priv, reg, offset);
> -}
> -
> -static int bcmgenet_hfb_find_unused_filter(struct bcmgenet_priv *priv)
> -{
> -	u32 f_index;
> -
> -	for (f_index = 0; f_index < priv->hw_params->hfb_filter_cnt; f_index++)
> -		if (!bcmgenet_hfb_is_filter_enabled(priv, f_index))
> -			return f_index;
> -
> -	return -ENOMEM;
> -}
> -
> -/* bcmgenet_hfb_add_filter
> - *
> - * Add new filter to Hardware Filter Block to match and direct Rx traffic to
> - * desired Rx queue.
> - *
> - * f_data is an array of unsigned 32-bit integers where each 32-bit integer
> - * provides filter data for 2 bytes (4 nibbles) of Rx frame:
> - *
> - * bits 31:20 - unused
> - * bit  19    - nibble 0 match enable
> - * bit  18    - nibble 1 match enable
> - * bit  17    - nibble 2 match enable
> - * bit  16    - nibble 3 match enable
> - * bits 15:12 - nibble 0 data
> - * bits 11:8  - nibble 1 data
> - * bits 7:4   - nibble 2 data
> - * bits 3:0   - nibble 3 data
> - *
> - * Example:
> - * In order to match:
> - * - Ethernet frame type = 0x0800 (IP)
> - * - IP version field = 4
> - * - IP protocol field = 0x11 (UDP)
> - *
> - * The following filter is needed:
> - * u32 hfb_filter_ipv4_udp[] = {
> - *   Rx frame offset 0x00: 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> - *   Rx frame offset 0x08: 0x00000000, 0x00000000, 0x000F0800, 0x00084000,
> - *   Rx frame offset 0x10: 0x00000000, 0x00000000, 0x00000000, 0x00030011,
> - * };
> - *
> - * To add the filter to HFB and direct the traffic to Rx queue 0, call:
> - * bcmgenet_hfb_add_filter(priv, hfb_filter_ipv4_udp,
> - *                         ARRAY_SIZE(hfb_filter_ipv4_udp), 0);
> - */
> -int bcmgenet_hfb_add_filter(struct bcmgenet_priv *priv, u32 *f_data,
> -			    u32 f_length, u32 rx_queue)
> -{
> -	int f_index;
> -	u32 i;
> -
> -	f_index = bcmgenet_hfb_find_unused_filter(priv);
> -	if (f_index < 0)
> -		return -ENOMEM;
> -
> -	if (f_length > priv->hw_params->hfb_filter_size)
> -		return -EINVAL;
> -
> -	for (i = 0; i < f_length; i++)
> -		bcmgenet_hfb_writel(priv, f_data[i],
> -			(f_index * priv->hw_params->hfb_filter_size + i) *
> -			sizeof(u32));
> -
> -	bcmgenet_hfb_set_filter_length(priv, f_index, 2 * f_length);
> -	bcmgenet_hfb_set_filter_rx_queue_mapping(priv, f_index, rx_queue);
> -	bcmgenet_hfb_enable_filter(priv, f_index);
> -	bcmgenet_hfb_reg_writel(priv, 0x1, HFB_CTRL);
> -
> -	return 0;
> -}
> -
>  /* bcmgenet_hfb_clear
>   *
>   * Clear Hardware Filter Block and disable all filtering.
> 


-- 
Florian