From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: linux-spi@vger.kernel.org
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Andrew Lunn <andrew@lunn.ch>, Jason Cooper <jason@lakedaemon.net>,
Tawfik Bayouk <tawfik@marvell.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Nadav Haklai <nadavh@marvell.com>,
Lior Amsalem <alior@marvell.com>, Mark Brown <broonie@kernel.org>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Subject: Re: [PATCH 3/3] ARM: mvebu: use improved armada spi device tree compatible name for each SoC
Date: Wed, 27 May 2015 12:04:34 +0200 [thread overview]
Message-ID: <556596B2.4060300@free-electrons.com> (raw)
In-Reply-To: <1432633484-18758-4-git-send-email-gregory.clement@free-electrons.com>
Hi,
On 26/05/2015 11:44, Gregory CLEMENT wrote:
> Use the new compatible introduced in rder to beneficiate of a wider
> and more accurate range of baud rates to be used.
>
As the driver part was applied, I applied this patch
on mvebu/dt
Thanks,
Gregory
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
> arch/arm/boot/dts/armada-370-xp.dtsi | 2 --
> arch/arm/boot/dts/armada-370.dtsi | 4 ++++
> arch/arm/boot/dts/armada-375.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-38x.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-39x.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-xp.dtsi | 8 ++++++++
> 6 files changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
> index ec96f0b36346..7f0252c580e4 100644
> --- a/arch/arm/boot/dts/armada-370-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-370-xp.dtsi
> @@ -149,7 +149,6 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,armada-370-spi", "marvell,orion-spi";
> reg = <0x10600 0x28>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -160,7 +159,6 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,armada-370-spi", "marvell,orion-spi";
> reg = <0x10680 0x28>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index 00b50db57c9c..3f036bd635f4 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -139,11 +139,15 @@
> * board level if a different configuration is used.
> */
> spi0: spi@10600 {
> + compatible = "marvell,armada-370-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi0_pins1>;
> pinctrl-names = "default";
> };
>
> spi1: spi@10680 {
> + compatible = "marvell,armada-370-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi1_pins>;
> pinctrl-names = "default";
> };
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index f076ff856d8b..67a0ab0f71e0 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -238,7 +238,8 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-375-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -249,7 +250,8 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-375-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 218a2acd36e5..eace85db7c8c 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -167,7 +167,8 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-380-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -178,7 +179,8 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-380-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
> index ecd1318109ba..fc9864f85fc2 100644
> --- a/arch/arm/boot/dts/armada-39x.dtsi
> +++ b/arch/arm/boot/dts/armada-39x.dtsi
> @@ -128,7 +128,8 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-390-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -139,7 +140,8 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-390-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
> index 013d63f69e36..e78ce4ab6b75 100644
> --- a/arch/arm/boot/dts/armada-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-xp.dtsi
> @@ -85,10 +85,18 @@
> };
>
> spi0: spi@10600 {
> + compatible = "marvell,armada-xp-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi0_pins>;
> pinctrl-names = "default";
> };
>
> + spi1: spi@10680 {
> + compatible = "marvell,armada-xp-spi",
> + "marvell,orion-spi";
> + };
> +
> +
> i2c0: i2c@11000 {
> compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
> reg = <0x11000 0x100>;
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: mvebu: use improved armada spi device tree compatible name for each SoC
Date: Wed, 27 May 2015 12:04:34 +0200 [thread overview]
Message-ID: <556596B2.4060300@free-electrons.com> (raw)
In-Reply-To: <1432633484-18758-4-git-send-email-gregory.clement@free-electrons.com>
Hi,
On 26/05/2015 11:44, Gregory CLEMENT wrote:
> Use the new compatible introduced in rder to beneficiate of a wider
> and more accurate range of baud rates to be used.
>
As the driver part was applied, I applied this patch
on mvebu/dt
Thanks,
Gregory
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
> arch/arm/boot/dts/armada-370-xp.dtsi | 2 --
> arch/arm/boot/dts/armada-370.dtsi | 4 ++++
> arch/arm/boot/dts/armada-375.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-38x.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-39x.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-xp.dtsi | 8 ++++++++
> 6 files changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
> index ec96f0b36346..7f0252c580e4 100644
> --- a/arch/arm/boot/dts/armada-370-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-370-xp.dtsi
> @@ -149,7 +149,6 @@
> };
>
> spi0: spi at 10600 {
> - compatible = "marvell,armada-370-spi", "marvell,orion-spi";
> reg = <0x10600 0x28>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -160,7 +159,6 @@
> };
>
> spi1: spi at 10680 {
> - compatible = "marvell,armada-370-spi", "marvell,orion-spi";
> reg = <0x10680 0x28>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index 00b50db57c9c..3f036bd635f4 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -139,11 +139,15 @@
> * board level if a different configuration is used.
> */
> spi0: spi at 10600 {
> + compatible = "marvell,armada-370-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi0_pins1>;
> pinctrl-names = "default";
> };
>
> spi1: spi at 10680 {
> + compatible = "marvell,armada-370-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi1_pins>;
> pinctrl-names = "default";
> };
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index f076ff856d8b..67a0ab0f71e0 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -238,7 +238,8 @@
> };
>
> spi0: spi at 10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-375-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -249,7 +250,8 @@
> };
>
> spi1: spi at 10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-375-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 218a2acd36e5..eace85db7c8c 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -167,7 +167,8 @@
> };
>
> spi0: spi at 10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-380-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -178,7 +179,8 @@
> };
>
> spi1: spi at 10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-380-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
> index ecd1318109ba..fc9864f85fc2 100644
> --- a/arch/arm/boot/dts/armada-39x.dtsi
> +++ b/arch/arm/boot/dts/armada-39x.dtsi
> @@ -128,7 +128,8 @@
> };
>
> spi0: spi at 10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-390-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -139,7 +140,8 @@
> };
>
> spi1: spi at 10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-390-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
> index 013d63f69e36..e78ce4ab6b75 100644
> --- a/arch/arm/boot/dts/armada-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-xp.dtsi
> @@ -85,10 +85,18 @@
> };
>
> spi0: spi at 10600 {
> + compatible = "marvell,armada-xp-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi0_pins>;
> pinctrl-names = "default";
> };
>
> + spi1: spi at 10680 {
> + compatible = "marvell,armada-xp-spi",
> + "marvell,orion-spi";
> + };
> +
> +
> i2c0: i2c at 11000 {
> compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
> reg = <0x11000 0x100>;
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: linux-spi@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Lior Amsalem <alior@marvell.com>,
Tawfik Bayouk <tawfik@marvell.com>,
Nadav Haklai <nadavh@marvell.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 3/3] ARM: mvebu: use improved armada spi device tree compatible name for each SoC
Date: Wed, 27 May 2015 12:04:34 +0200 [thread overview]
Message-ID: <556596B2.4060300@free-electrons.com> (raw)
In-Reply-To: <1432633484-18758-4-git-send-email-gregory.clement@free-electrons.com>
Hi,
On 26/05/2015 11:44, Gregory CLEMENT wrote:
> Use the new compatible introduced in rder to beneficiate of a wider
> and more accurate range of baud rates to be used.
>
As the driver part was applied, I applied this patch
on mvebu/dt
Thanks,
Gregory
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
> arch/arm/boot/dts/armada-370-xp.dtsi | 2 --
> arch/arm/boot/dts/armada-370.dtsi | 4 ++++
> arch/arm/boot/dts/armada-375.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-38x.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-39x.dtsi | 6 ++++--
> arch/arm/boot/dts/armada-xp.dtsi | 8 ++++++++
> 6 files changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
> index ec96f0b36346..7f0252c580e4 100644
> --- a/arch/arm/boot/dts/armada-370-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-370-xp.dtsi
> @@ -149,7 +149,6 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,armada-370-spi", "marvell,orion-spi";
> reg = <0x10600 0x28>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -160,7 +159,6 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,armada-370-spi", "marvell,orion-spi";
> reg = <0x10680 0x28>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index 00b50db57c9c..3f036bd635f4 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -139,11 +139,15 @@
> * board level if a different configuration is used.
> */
> spi0: spi@10600 {
> + compatible = "marvell,armada-370-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi0_pins1>;
> pinctrl-names = "default";
> };
>
> spi1: spi@10680 {
> + compatible = "marvell,armada-370-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi1_pins>;
> pinctrl-names = "default";
> };
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index f076ff856d8b..67a0ab0f71e0 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -238,7 +238,8 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-375-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -249,7 +250,8 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-375-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 218a2acd36e5..eace85db7c8c 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -167,7 +167,8 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-380-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -178,7 +179,8 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-380-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
> index ecd1318109ba..fc9864f85fc2 100644
> --- a/arch/arm/boot/dts/armada-39x.dtsi
> +++ b/arch/arm/boot/dts/armada-39x.dtsi
> @@ -128,7 +128,8 @@
> };
>
> spi0: spi@10600 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-390-spi",
> + "marvell,orion-spi";
> reg = <0x10600 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -139,7 +140,8 @@
> };
>
> spi1: spi@10680 {
> - compatible = "marvell,orion-spi";
> + compatible = "marvell,armada-390-spi",
> + "marvell,orion-spi";
> reg = <0x10680 0x50>;
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
> index 013d63f69e36..e78ce4ab6b75 100644
> --- a/arch/arm/boot/dts/armada-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-xp.dtsi
> @@ -85,10 +85,18 @@
> };
>
> spi0: spi@10600 {
> + compatible = "marvell,armada-xp-spi",
> + "marvell,orion-spi";
> pinctrl-0 = <&spi0_pins>;
> pinctrl-names = "default";
> };
>
> + spi1: spi@10680 {
> + compatible = "marvell,armada-xp-spi",
> + "marvell,orion-spi";
> + };
> +
> +
> i2c0: i2c@11000 {
> compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
> reg = <0x11000 0x100>;
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2015-05-27 10:04 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-26 9:44 [PATCH 0/3] Fix baud rate for Armada SoCs Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 9:44 ` [PATCH 1/3] spi: orion: Fix maximum baud rates for Armada 370/XP Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 10:36 ` Mark Brown
2015-05-26 10:36 ` Mark Brown
2015-05-26 10:36 ` Mark Brown
2015-05-26 12:08 ` Gregory CLEMENT
2015-05-26 12:08 ` Gregory CLEMENT
2015-05-26 12:08 ` Gregory CLEMENT
2015-05-26 9:44 ` [PATCH 2/3] spi: orion: Fix extended baud rates for each Armada SoCs Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 10:38 ` Mark Brown
2015-05-26 10:38 ` Mark Brown
2015-05-26 10:38 ` Mark Brown
2015-05-26 12:08 ` Andrew Lunn
2015-05-26 12:08 ` Andrew Lunn
2015-05-26 12:08 ` Andrew Lunn
2015-05-26 12:20 ` Gregory CLEMENT
2015-05-26 12:20 ` Gregory CLEMENT
2015-05-26 12:20 ` Gregory CLEMENT
[not found] ` <556464F8.1020707-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2015-05-27 17:45 ` Mark Brown
2015-05-27 17:45 ` Mark Brown
2015-05-27 17:45 ` Mark Brown
[not found] ` <20150527174547.GI21577-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-05-27 17:47 ` Gregory CLEMENT
2015-05-27 17:47 ` Gregory CLEMENT
2015-05-27 17:47 ` Gregory CLEMENT
2015-05-27 18:39 ` Mark Brown
2015-05-27 18:39 ` Mark Brown
2015-05-26 9:44 ` [PATCH 3/3] ARM: mvebu: use improved armada spi device tree compatible name for each SoC Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-26 9:44 ` Gregory CLEMENT
2015-05-27 10:04 ` Gregory CLEMENT [this message]
2015-05-27 10:04 ` Gregory CLEMENT
2015-05-27 10:04 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=556596B2.4060300@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=alior@marvell.com \
--cc=andrew@lunn.ch \
--cc=boris.brezillon@free-electrons.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=nadavh@marvell.com \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tawfik@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.