Re: [PATCHv4 03/10] arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk

[Tero Kristo <t-kristo@ti.com>]

On 06/01/2015 09:23 AM, Tomi Valkeinen wrote:
> We need set-rate-parent flags for the display's clock path so that the
> DSS driver can change the clock rate of the PLL.
>
> This patchs adds the ti,set-rate-parent flag to 'dss_dss_clk' clock
> node, which is only a gate clock, allowing the setting of the clock rate
> to propagate to the PLL.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: devicetree@vger.kernel.org

Acked-by: Tero Kristo <t-kristo@ti.com>

> ---
>   arch/arm/boot/dts/dra7xx-clocks.dtsi | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> index 470f39c4e326..357bedeebfac 100644
> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> @@ -1531,6 +1531,7 @@
>   		clocks = <&dpll_per_h12x2_ck>;
>   		ti,bit-shift = <8>;
>   		reg = <0x1120>;
> +		ti,set-rate-parent;
>   	};
>
>   	dss_hdmi_clk: dss_hdmi_clk {
>