meta-qt5

meta-qt5

[Jacob Stiffler]

It appears that the meta-qt5 layer has dropped the 5.4.1 versioned 
recipes. This means that the meta-arago bbappends no longer apply.

I see there is a history of meta-arago using the versioned recipes, but 
these are no longer there, and only the git based recipes remain.

I'm not sure of the impact there would be in moving the meta-arago 
appends to the git based recipes. I'll give this a try and provide an 
update later.

- Jake

Re: meta-qt5

[Denys Dmytriyenko]

On Mon, Jun 08, 2015 at 09:05:28AM -0400, Jacob Stiffler wrote:
> It appears that the meta-qt5 layer has dropped the 5.4.1 versioned
> recipes. This means that the meta-arago bbappends no longer apply.
> 
> I see there is a history of meta-arago using the versioned recipes,
> but these are no longer there, and only the git based recipes
> remain.
> 
> I'm not sure of the impact there would be in moving the meta-arago
> appends to the git based recipes. I'll give this a try and provide
> an update later.

Yeah, saw this last week, but haven't had a chance to fix it.

What I'm thinking is there are 2 options:

1. Rename bbappends from 5.4.1 to git - seems to build fine locally here.

2. Lock meta-qt5 on the commit before 5.4.1 got removed - it won't get much 
better in 5.4.x branch and we are waiting for 5.5 to get better Touchscreen 
support. We can keep using meta-qt5/master in meta-arago/master, but lock 
meta-arago/daisy to 5.4.1, which is what has been tested so far. This seems 
safer for the release...

Thoughts?

-- 
Denys

Re: meta-qt5

[Jacob Stiffler]

On 6/8/2015 2:21 PM, Denys Dmytriyenko wrote:
> On Mon, Jun 08, 2015 at 09:05:28AM -0400, Jacob Stiffler wrote:
>> It appears that the meta-qt5 layer has dropped the 5.4.1 versioned
>> recipes. This means that the meta-arago bbappends no longer apply.
>>
>> I see there is a history of meta-arago using the versioned recipes,
>> but these are no longer there, and only the git based recipes
>> remain.
>>
>> I'm not sure of the impact there would be in moving the meta-arago
>> appends to the git based recipes. I'll give this a try and provide
>> an update later.
> Yeah, saw this last week, but haven't had a chance to fix it.
>
> What I'm thinking is there are 2 options:
>
> 1. Rename bbappends from 5.4.1 to git - seems to build fine locally here.
>
> 2. Lock meta-qt5 on the commit before 5.4.1 got removed - it won't get much
> better in 5.4.x branch and we are waiting for 5.5 to get better Touchscreen
> support. We can keep using meta-qt5/master in meta-arago/master, but lock
> meta-arago/daisy to 5.4.1, which is what has been tested so far. This seems
> safer for the release...
>
> Thoughts?

I agree that #2 sounds safer at this point.

Re: meta-qt5

[Martin Jansa]

[-- Attachment #1: Type: text/plain, Size: 1523 bytes --]

On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote:
> Morning Martin,

morning,

> I found your email from here:
> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/
> 
> I'm searching for help on that package/doc
> 
> If you prefer I can send my question to a specific mailing list if you
> pin point me where?

openembedded-devel@lists.openembedded.org is better place (see README
file)

> So my goal is to run qt5 on my OMAP3 board by using yocto.
> 
> I have fallow :
> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
> and &
> http://gpupowered.org/node/20
> 
> Try to run this:
> root@overo:/# export QT_DEBUG_BACKINGSTORE=1
> root@overo:/# export QT_QPA_PLATFORM=minimal
> root@overo:/# Qt5_CinematicExperience -plugin tslib
> libpng warning: iCCP: known incorrect sRGB profile
> libpng warning: iCCP: known incorrect sRGB profile
> This plugin does not support createPlatformOpenGLContext!
> QtQuick: failed to create OpenGL context
> This plugin does not support createPlatformOpenGLContext!
> QtQuick: failed to create OpenGL context
> 
> Result:
> nothing is visible on my LCD except the console...
> 
> So do you have any idea where I should start digging to simply start
> by making a qt5 example run on my board?

I've no experience with wandaboard, but few people asked about it with
relation to qt5, so maybe someone will respond on ML.

-- 
Martin 'JaMa' Jansa     jabber: Martin.Jansa@gmail.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]

Re: meta-qt5

[Gary Thomas]

On 2014-02-03 10:37, Martin Jansa wrote:
> On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote:
>> Morning Martin,
>
> morning,
>
>> I found your email from here:
>> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/
>>
>> I'm searching for help on that package/doc
>>
>> If you prefer I can send my question to a specific mailing list if you
>> pin point me where?
>
> openembedded-devel@lists.openembedded.org is better place (see README
> file)
>
>> So my goal is to run qt5 on my OMAP3 board by using yocto.
>>
>> I have fallow :
>> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
>> and &
>> http://gpupowered.org/node/20
>>
>> Try to run this:
>> root@overo:/# export QT_DEBUG_BACKINGSTORE=1
>> root@overo:/# export QT_QPA_PLATFORM=minimal
>> root@overo:/# Qt5_CinematicExperience -plugin tslib
>> libpng warning: iCCP: known incorrect sRGB profile
>> libpng warning: iCCP: known incorrect sRGB profile
>> This plugin does not support createPlatformOpenGLContext!
>> QtQuick: failed to create OpenGL context
>> This plugin does not support createPlatformOpenGLContext!
>> QtQuick: failed to create OpenGL context
>>
>> Result:
>> nothing is visible on my LCD except the console...
>>
>> So do you have any idea where I should start digging to simply start
>> by making a qt5 example run on my board?
>
> I've no experience with wandaboard, but few people asked about it with
> relation to qt5, so maybe someone will respond on ML.
>

This works on my SabreLite which I built without X11 support.  I did not
use any of your QT_xxx exports, only this command line.

   # Qt5_CinematicExperience -platform eglfs -plugin tslib:/dev/input/touchscreen0

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: meta-qt5

[Otavio Salvador]

Hello,

On Mon, Feb 3, 2014 at 3:43 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 2014-02-03 10:37, Martin Jansa wrote:
>>
>> On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote:
>>>
>>> Morning Martin,
>>
>>
>> morning,
>>
>>> I found your email from here:
>>> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/
>>>
>>> I'm searching for help on that package/doc
>>>
>>> If you prefer I can send my question to a specific mailing list if you
>>> pin point me where?
>>
>>
>> openembedded-devel@lists.openembedded.org is better place (see README
>> file)
>>
>>> So my goal is to run qt5 on my OMAP3 board by using yocto.
>>>
>>> I have fallow :
>>> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
>>> and &
>>> http://gpupowered.org/node/20
>>>
>>> Try to run this:
>>> root@overo:/# export QT_DEBUG_BACKINGSTORE=1
>>> root@overo:/# export QT_QPA_PLATFORM=minimal
>>> root@overo:/# Qt5_CinematicExperience -plugin tslib
>>> libpng warning: iCCP: known incorrect sRGB profile
>>> libpng warning: iCCP: known incorrect sRGB profile
>>> This plugin does not support createPlatformOpenGLContext!
>>> QtQuick: failed to create OpenGL context
>>> This plugin does not support createPlatformOpenGLContext!
>>> QtQuick: failed to create OpenGL context
>>>
>>> Result:
>>> nothing is visible on my LCD except the console...
>>>
>>> So do you have any idea where I should start digging to simply start
>>> by making a qt5 example run on my board?
>>
>>
>> I've no experience with wandaboard, but few people asked about it with
>> relation to qt5, so maybe someone will respond on ML.
>>
>
> This works on my SabreLite which I built without X11 support.  I did not
> use any of your QT_xxx exports, only this command line.
>
>   # Qt5_CinematicExperience -platform eglfs -plugin
> tslib:/dev/input/touchscreen0

Same works for Wandboard. I have one customer using it.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: meta-qt5

[Denys Dmytriyenko]

On Fri, Feb 07, 2014 at 11:47:16AM -0200, Otavio Salvador wrote:
> Hello,
> 
> On Mon, Feb 3, 2014 at 3:43 PM, Gary Thomas <gary@mlbassoc.com> wrote:
> > On 2014-02-03 10:37, Martin Jansa wrote:
> >>
> >> On Mon, Feb 03, 2014 at 12:07:30PM -0500, Kevyn-Alexandre Paré wrote:
> >>>
> >>> Morning Martin,
> >>
> >>
> >> morning,
> >>
> >>> I found your email from here:
> >>> http://layers.openembedded.org/layerindex/branch/master/layer/meta-qt5/
> >>>
> >>> I'm searching for help on that package/doc
> >>>
> >>> If you prefer I can send my question to a specific mailing list if you
> >>> pin point me where?
> >>
> >>
> >> openembedded-devel@lists.openembedded.org is better place (see README
> >> file)
> >>
> >>> So my goal is to run qt5 on my OMAP3 board by using yocto.
> >>>
> >>> I have fallow :
> >>> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard
> >>> and &
> >>> http://gpupowered.org/node/20
> >>>
> >>> Try to run this:
> >>> root@overo:/# export QT_DEBUG_BACKINGSTORE=1
> >>> root@overo:/# export QT_QPA_PLATFORM=minimal
> >>> root@overo:/# Qt5_CinematicExperience -plugin tslib
> >>> libpng warning: iCCP: known incorrect sRGB profile
> >>> libpng warning: iCCP: known incorrect sRGB profile
> >>> This plugin does not support createPlatformOpenGLContext!
> >>> QtQuick: failed to create OpenGL context
> >>> This plugin does not support createPlatformOpenGLContext!
> >>> QtQuick: failed to create OpenGL context
> >>>
> >>> Result:
> >>> nothing is visible on my LCD except the console...
> >>>
> >>> So do you have any idea where I should start digging to simply start
> >>> by making a qt5 example run on my board?
> >>
> >>
> >> I've no experience with wandaboard, but few people asked about it with
> >> relation to qt5, so maybe someone will respond on ML.
> >>
> >
> > This works on my SabreLite which I built without X11 support.  I did not
> > use any of your QT_xxx exports, only this command line.
> >
> >   # Qt5_CinematicExperience -platform eglfs -plugin
> > tslib:/dev/input/touchscreen0
> 
> Same works for Wandboard. I have one customer using it.

Not sure what omap3 board specifically that is, but meta-qt5 was successfully 
tested on another TI platform with OpenGLES on SGX - AM335x. No X11 though.

-- 
Denys