All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	ath10k <ath10k@lists.infradead.org>
Subject: Re: Anyone tried ath10k AP with 40Mhz operation?
Date: Thu, 11 Jun 2015 06:23:17 -0700	[thread overview]
Message-ID: <55798BC5.3030800@candelatech.com> (raw)
In-Reply-To: <CA+BoTQmWmrkCjTkq9R9qXZBqq=ynNKdsgn4uLNAucetXy39GRQ@mail.gmail.com>



On 06/10/2015 11:54 PM, Michal Kazior wrote:
> On 10 June 2015 at 22:31, Ben Greear <greearb@candelatech.com> wrote:
>> I'm trying this hostapd config file.  Beacons seem OK, and station
>> associates.  Station puts DHCP Discover on the air (using 20Mhz according
>> to wireshark).  AP reads this, and thinks it is sending a DHCP response back,
>> but sniffer never shows DHCP response on the air.
>
> Is the MSDU carrying DHCP resp completed with "ok" status? Or is it
> maybe no-ack or discarded?

I'll check, and also try stock firmware to see if that makes a difference.

>> Kernel is 4.0.4+, ath10k firmware is CT firmware, 10.1.467 based.
>>
>> I am curious if anyone else has tried to do this?
>>
>> Thanks,
>> Ben
>>
>> interface=vap50
>> driver=nl80211
>> logger_syslog=-1
>> logger_syslog_level=2
>> logger_stdout=-1
>> logger_stdout_level=2
>> ctrl_interface=/var/run/hostapd
>> ctrl_interface_group=0
>> ssid=ben-ota-2a
> [...]
>
> Works for me on c7b39fdeb479a7956a3c41638d527196ce295fdd
> (github.com/kvalo/ath) with
>   AP: qca988x hw2.0, 10.1.467.2-1
>   STA: qca6174 hw2.2 (its a 2x2),

What NIC model is your qca6174?  In case I cannot
get my setup to work, it would be nice to be able to be able to duplicate
your configuration...


Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Ben Greear <greearb@candelatech.com>
To: Michal Kazior <michal.kazior@tieto.com>
Cc: ath10k <ath10k@lists.infradead.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: Anyone tried ath10k AP with 40Mhz operation?
Date: Thu, 11 Jun 2015 06:23:17 -0700	[thread overview]
Message-ID: <55798BC5.3030800@candelatech.com> (raw)
In-Reply-To: <CA+BoTQmWmrkCjTkq9R9qXZBqq=ynNKdsgn4uLNAucetXy39GRQ@mail.gmail.com>



On 06/10/2015 11:54 PM, Michal Kazior wrote:
> On 10 June 2015 at 22:31, Ben Greear <greearb@candelatech.com> wrote:
>> I'm trying this hostapd config file.  Beacons seem OK, and station
>> associates.  Station puts DHCP Discover on the air (using 20Mhz according
>> to wireshark).  AP reads this, and thinks it is sending a DHCP response back,
>> but sniffer never shows DHCP response on the air.
>
> Is the MSDU carrying DHCP resp completed with "ok" status? Or is it
> maybe no-ack or discarded?

I'll check, and also try stock firmware to see if that makes a difference.

>> Kernel is 4.0.4+, ath10k firmware is CT firmware, 10.1.467 based.
>>
>> I am curious if anyone else has tried to do this?
>>
>> Thanks,
>> Ben
>>
>> interface=vap50
>> driver=nl80211
>> logger_syslog=-1
>> logger_syslog_level=2
>> logger_stdout=-1
>> logger_stdout_level=2
>> ctrl_interface=/var/run/hostapd
>> ctrl_interface_group=0
>> ssid=ben-ota-2a
> [...]
>
> Works for me on c7b39fdeb479a7956a3c41638d527196ce295fdd
> (github.com/kvalo/ath) with
>   AP: qca988x hw2.0, 10.1.467.2-1
>   STA: qca6174 hw2.2 (its a 2x2),

What NIC model is your qca6174?  In case I cannot
get my setup to work, it would be nice to be able to be able to duplicate
your configuration...


Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

  reply	other threads:[~2015-06-11 13:23 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-10 20:31 Anyone tried ath10k AP with 40Mhz operation? Ben Greear
2015-06-10 20:31 ` Ben Greear
2015-06-11  6:54 ` Michal Kazior
2015-06-11  6:54   ` Michal Kazior
2015-06-11 13:23   ` Ben Greear [this message]
2015-06-11 13:23     ` Ben Greear
2015-06-11 19:29     ` Ben Greear
2015-06-11 19:29       ` Ben Greear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55798BC5.3030800@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=michal.kazior@tieto.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.